crosstool-ng 1.16.0: libtool problem

Bryan Hundven bryanhundven@gmail.com
Sun Oct 7 06:18:00 GMT 2012


On Sat, Oct 6, 2012 at 11:12 PM, Zvi Vered <veredz72@gmail.com> wrote:
> Hi Bryan,
>
> I just sent the file using https://www.transferbigfiles.com.

I have posted the build.log here:
http://bryanhundven.com/zvi-build.log

for anyone else to view it.

-Bryan

> Thanks,
> Zvika
>
> On Sun, Oct 7, 2012 at 6:27 AM, Bryan Hundven <bryanhundven@gmail.com> wrote:
>> On Sat, Oct 6, 2012 at 8:38 PM, Zvi Vered <veredz72@gmail.com> wrote:
>>> Hi Bryan,
>>>
>>> Attached the new .config
>>> Now I got the following error:
>>
>> Zvika,
>>
>> Please post the full log to pastebin or similar site.
>>
>> Thanks,
>>
>> -Bryan
>>
>>> [ALL  ]    ./libtool: line 466: CDPATH: command not found
>>> [ALL  ]    ./libtool: line 466: CDPATH: command not found
>>> [ALL  ]    ./libtool: line 1144: func_opt_split: command not found
>>> [ALL  ]    libtool: Version mismatch error.  This is libtool 2.2.6
>>> Debian-2.2.6a-1ubuntu1, but the
>>> [ALL  ]    libtool: definition of this LT_INIT comes from an older release.
>>> [ALL  ]    libtool: You should recreate aclocal.m4 with macros from
>>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1
>>> [ALL  ]    libtool: and run autoconf again.
>>> [ERROR]    make[1]: *** [block.lo] Error 1
>>> [ALL  ]    make[1]: *** Waiting for unfinished jobs....
>>> [ALL  ]    ./libtool: line 466: CDPATH: command not found
>>> [ALL  ]    ./libtool: line 1144: func_opt_split: command not found
>>> [ALL  ]    libtool: Version mismatch error.  This is libtool 2.2.6
>>> Debian-2.2.6a-1ubuntu1, but the
>>> [ALL  ]    libtool: definition of this LT_INIT comes from an older release.
>>> [ALL  ]    libtool: You should recreate aclocal.m4 with macros from
>>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1
>>> [ALL  ]    libtool: and run autoconf again.
>>> [ERROR]    make[1]: *** [names.lo] Error 1
>>> [ALL  ]    ./libtool: line 1144: func_opt_split: command not found
>>> [ALL  ]    libtool: Version mismatch error.  This is libtool 2.2.6
>>> Debian-2.2.6a-1ubuntu1, but the
>>> [ALL  ]    libtool: definition of this LT_INIT comes from an older release.
>>> [ALL  ]    libtool: You should recreate aclocal.m4 with macros from
>>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1
>>> [ALL  ]    libtool: and run autoconf again.
>>> [ERROR]    make[1]: *** [loop.lo] Error 1
>>> [ALL  ]    make[1]: Leaving directory
>>> `/home/zvivered/GNU/ct-ng-1.16.0/bin/.build/i686-nptl-linux-gnu/build/build-cloog-ppl-host-i686-build_pc-linux-gnu'
>>> [ERROR]
>>> [ERROR]  >>
>>> [ERROR]  >>  Build failed in step 'Installing CLooG/PPL for host'
>>> [ERROR]  >>        called in step '(top-level)'
>>> [ERROR]  >>
>>> [ERROR]  >>  Error happened in: CT_DoExecLog[scripts/functions@158]
>>> [ERROR]  >>        called from:
>>> do_cloog_backend[scripts/build/companion_libs/cloog.sh@111]
>>> [ERROR]  >>        called from:
>>> do_cloog_for_host[scripts/build/companion_libs/cloog.sh@72]
>>> [ERROR]  >>        called from: main[scripts/crosstool-NG.sh@598]
>>> [ERROR]  >>
>>> [ERROR]  >>  For more info on this error, look at the file: 'build.log'
>>> [ERROR]  >>  There is a list of known issues, some with workarounds, in:
>>> [ERROR]  >>
>>> '/home/zvivered/GNU/ct-ng-1.16.0/share/doc/crosstool-ng/ct-ng.1.16.0/B
>>> - Known issues.txt'
>>> [ERROR]
>>>
>>> I did not install libtool manually. I have one libtool installed by CENTOS:
>>> ltmain.sh (GNU libtool) 1.5.22 (1.1220.2.365 2005/12/18 22:14:06)
>>>
>>> I installed automake 1.10, autoconf 2.60 ***manually*** because
>>> crosstool-ng failed at earlier stages. (./configure, make, make
>>> install). But when I checked "companion tools", crosstool should
>>> ignore them. Am I right ?
>>>
>>> Can you help ?
>>>
>>> Thanks,
>>> Zvika
>>>
>>>
>>> On Sun, Oct 7, 2012 at 3:24 AM, Bryan Hundven <bryanhundven@gmail.com> wrote:
>>>> Zvika
>>>>
>>>> On Sat, Oct 6, 2012 at 4:23 PM, Zvi Vered <veredz72@gmail.com> wrote:
>>>>> Hi Bryan,
>>>>>
>>>>> Did you mean:
>>>>> ./configure --prefix=$HOME/GNU/ct-ng-1.16.0 --without-automake
>>>>> --without-libtool --without-libtoolize
>>>>> ?
>>>>
>>>> No, It's in 'ct-ng menuconfig'. You should find it under the
>>>> "companion tools" menu.
>>>>
>>>>> But now I got the following error:
>>>>>
>>>>> Already extracted 'linux-3.4.7'
>>>>> [DEBUG]    Already patched 'linux-3.4.7'
>>>>> [DEBUG]    Already extracted 'gmp-4.3.2'
>>>>> [DEBUG]    Already patched 'gmp-4.3.2'
>>>>> [DEBUG]    Already extracted 'mpfr-2.4.2'
>>>>> [DEBUG]    Already patched 'mpfr-2.4.2'
>>>>> [DEBUG]    Running autoreconf
>>>>> [DEBUG]    ==> Executing: 'autoreconf'
>>>>> [ERROR]    acinclude.m4:26: error: Autoconf version 2.60 or higher is required
>>>>> [ALL  ]    acinclude.m4:26: the top level
>>>>> [ALL  ]    autom4te: /usr/bin/m4 failed with exit status: 63
>>>>> [ALL  ]    aclocal: autom4te failed with exit status: 63
>>>>> [ALL  ]    autoreconf: aclocal failed with exit status: 63
>>>>> [ERROR]
>>>>>
>>>>> I ran "yum install autoconf" and it installs autoconf 2.59
>>>>>
>>>>> What autoconf should I install and how ?
>>>>>
>>>>> Thanks,
>>>>> Zvika
>>>>>
>>>>> On Sat, Oct 6, 2012 at 9:05 PM, Bryan Hundven <bryanhundven@gmail.com> wrote:
>>>>>> Zvi,
>>>>>>
>>>>>> On Sat, Oct 6, 2012 at 12:02 PM, Zvi Vered <veredz72@gmail.com> wrote:
>>>>>>> Dear Mr. Hundven,
>>>>>>
>>>>>> My name is Bryan. ;)
>>>>>>
>>>>>>>
>>>>>>> How can I set ct-ng to use "companion tools bundled with ct-ng" ?
>>>>>>
>>>>>> Read the documentation:
>>>>>>
>>>>>> http://crosstool-ng.org/hg/crosstool-ng/raw-file/43ace4bb005e/docs/3%20-%20Configuring%20a%20toolchain.txt
>>>>>>
>>>>>>> The output of "libtool --version" is:
>>>>>>> ltmain.sh (GNU libtool) 1.5.22 (1.1220.2.365 2005/12/18 22:14:06)
>>>>>>> I used "yum install" to install it.
>>>>>>>
>>>>>>> This is weird. According to .configure --help, the minimum libtool
>>>>>>> version should be:
>>>>>>>  1.5.26
>>>>>>> But running .configure does not alert on a libtool problem.
>>>>>>> Can this cause the problem ?
>>>>>>>
>>>>>>> I tried pastebin but I should be a PRO user to paste all build.log
>>>>>>>
>>>>>>> You help is highly appreciated.
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Zvika
>>>>>>>
>>>>>>> On Sat, Oct 6, 2012 at 10:10 AM, Bryan Hundven <bryanhundven@gmail.com> wrote:
>>>>>>>> On Fri, Oct 5, 2012 at 10:14 PM, Zvi Vered <veredz72@gmail.com> wrote:
>>>>>>>>> Hello,
>>>>>>>>>
>>>>>>>>> I'm using crosstool-ng 1.16.0 to create a toolchain for
>>>>>>>>> "i686-nptl-linux-gnu" under centos 5.3
>>>>>>>>>
>>>>>>>>> I got the following error:
>>>>>>>>>
>>>>>>>>> [ALL  ]    ./libtool: line 466: CDPATH: command not found
>>>>>>>>> [ALL  ]    ./libtool: line 466: CDPATH: command not found
>>>>>>>>> [ALL  ]    ./libtool: line 1144: func_opt_split: command not found
>>>>>>>>> [ALL  ]    libtool: Version mismatch error.  This is libtool 2.2.6
>>>>>>>>> Debian-2.2.6a-1ubuntu1, but the
>>>>>>>>> [ALL  ]    libtool: definition of this LT_INIT comes from an older release.
>>>>>>>>> [ALL  ]    libtool: You should recreate aclocal.m4 with macros from
>>>>>>>>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1
>>>>>>>>> [ALL  ]    libtool: and run autoconf again.
>>>>>>>>> [ERROR]    make[1]: *** [loop.lo] Error 1
>>>>>>>>> [ALL  ]    make[1]: *** Waiting for unfinished jobs....
>>>>>>>>> [ALL  ]    ./libtool: line 466: CDPATH: command not found
>>>>>>>>> [ALL  ]    ./libtool: line 1144: func_opt_split: command not found
>>>>>>>>> [ALL  ]    libtool: Version mismatch error.  This is libtool 2.2.6
>>>>>>>>> Debian-2.2.6a-1ubuntu1, but the
>>>>>>>>> [ALL  ]    libtool: definition of this LT_INIT comes from an older release.
>>>>>>>>> [ALL  ]    libtool: You should recreate aclocal.m4 with macros from
>>>>>>>>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1
>>>>>>>>> [ALL  ]    libtool: and run autoconf again.
>>>>>>>>> [ERROR]    make[1]: *** [block.lo] Error 1
>>>>>>>>> [ALL  ]    ./libtool: line 1144: func_opt_split: command not found
>>>>>>>>> [ALL  ]    libtool: Version mismatch error.  This is libtool 2.2.6
>>>>>>>>> Debian-2.2.6a-1ubuntu1, but the
>>>>>>>>> [ALL  ]    libtool: definition of this LT_INIT comes from an older release.
>>>>>>>>> [ALL  ]    libtool: You should recreate aclocal.m4 with macros from
>>>>>>>>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1
>>>>>>>>> [ALL  ]    libtool: and run autoconf again.
>>>>>>>>> [ERROR]    make[1]: *** [names.lo] Error 1
>>>>>>>>> [ALL  ]    make[1]: Leaving directory
>>>>>>>>> `/home/zvivered/GNU/ct-ng-1.16.0/working/i686-nptl-linux-gnu/build/build-cloog-ppl-host-i686-build_pc-linux-gnu'
>>>>>>>>> [ERROR]
>>>>>>>>> [ERROR]  >>
>>>>>>>>> [ERROR]  >>  Build failed in step 'Installing CLooG/PPL for host'
>>>>>>>>> [ERROR]  >>        called in step '(top-level)'
>>>>>>>>> [ERROR]  >>
>>>>>>>>> [ERROR]  >>  Error happened in: CT_DoExecLog[scripts/functions@158]
>>>>>>>>> [ERROR]  >>        called from:
>>>>>>>>> do_cloog_backend[scripts/build/companion_libs/cloog.sh@111]
>>>>>>>>> [ERROR]  >>        called from:
>>>>>>>>> do_cloog_for_host[scripts/build/companion_libs/cloog.sh@72]
>>>>>>>>> [ERROR]  >>        called from: main[scripts/crosstool-NG.sh@598]
>>>>>>>>> [ERROR]  >>
>>>>>>>>> [ERROR]  >>  For more info on this error, look at the file: 'build.log'
>>>>>>>>> [ERROR]  >>  There is a list of known issues, some with workarounds, in:
>>>>>>>>> [ERROR]  >>
>>>>>>>>> '/home/zvivered/GNU/ct-ng-1.16.0/share/doc/crosstool-ng/ct-ng.1.16.0/B
>>>>>>>>> - Known issues.txt'
>>>>>>>>> [ERROR]
>>>>>>>>> [ERROR]  (elapsed: 6:05.48)
>>>>>>>>>
>>>>>>>>> Attached config.ng (copy of .config).
>>>>>>>>>
>>>>>>>>> Can you help find the problem ?
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>> Zvika
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> For unsubscribe information see http://sourceware.org/lists.html#faq
>>>>>>>>
>>>>>>>> Zvi,
>>>>>>>>
>>>>>>>> Having the full log - posted to pastebin, or similar site, or hosted
>>>>>>>> on some other web site to save space on the mailing list - would also
>>>>>>>> be very helpful in this situation.
>>>>>>>>
>>>>>>>> From what I read, it looks like you have two different versions of
>>>>>>>> libtool in the same path!?! weird!
>>>>>>>>
>>>>>>>> Have you tried cloog 0.15.11?
>>>>>>>>
>>>>>>>> As I said in my previous message about automake, try using the
>>>>>>>> companion tools bundled with ct-ng.
>>>>>>>> ( http://sourceware.org/ml/crossgcc/2012-10/msg00014.html )
>>>>>>>>
>>>>>>>>># CT_COMP_TOOLS is not set
>>>>>>>>
>>>>>>>> Not all systems are compatible with ct-ng, which is why we provide m4,
>>>>>>>> autoconf, automake, libtool, and make.
>>>>>>>>
>>>>>>>> Also, this only seems to be a problem with cloog-ppl, have you also
>>>>>>>> tried google searching around for similar cloog build errors? This
>>>>>>>> doesn't look like it would be specific to crosstool-ng, but having the
>>>>>>>> full build log might prove that otherwise.
>>>>>>>>
>>>>>>>> -Bryan
>>>>>>
>>>>>> -Bryan
>>>>
>>>> -Bryan

--
For unsubscribe information see http://sourceware.org/lists.html#faq



More information about the crossgcc mailing list