crosstool-ng 1.16.0: libtool problem

[Bryan Hundven]

Zvika

On Sat, Oct 6, 2012 at 4:23 PM, Zvi Vered <veredz72@gmail.com> wrote:
> Hi Bryan,
>
> Did you mean:
> ./configure --prefix=$HOME/GNU/ct-ng-1.16.0 --without-automake
> --without-libtool --without-libtoolize
> ?

No, It's in 'ct-ng menuconfig'. You should find it under the
"companion tools" menu.

> But now I got the following error:
>
> Already extracted 'linux-3.4.7'
> [DEBUG]    Already patched 'linux-3.4.7'
> [DEBUG]    Already extracted 'gmp-4.3.2'
> [DEBUG]    Already patched 'gmp-4.3.2'
> [DEBUG]    Already extracted 'mpfr-2.4.2'
> [DEBUG]    Already patched 'mpfr-2.4.2'
> [DEBUG]    Running autoreconf
> [DEBUG]    ==> Executing: 'autoreconf'
> [ERROR]    acinclude.m4:26: error: Autoconf version 2.60 or higher is required
> [ALL  ]    acinclude.m4:26: the top level
> [ALL  ]    autom4te: /usr/bin/m4 failed with exit status: 63
> [ALL  ]    aclocal: autom4te failed with exit status: 63
> [ALL  ]    autoreconf: aclocal failed with exit status: 63
> [ERROR]
>
> I ran "yum install autoconf" and it installs autoconf 2.59
>
> What autoconf should I install and how ?
>
> Thanks,
> Zvika
>
> On Sat, Oct 6, 2012 at 9:05 PM, Bryan Hundven <bryanhundven@gmail.com> wrote:
>> Zvi,
>>
>> On Sat, Oct 6, 2012 at 12:02 PM, Zvi Vered <veredz72@gmail.com> wrote:
>>> Dear Mr. Hundven,
>>
>> My name is Bryan. ;)
>>
>>>
>>> How can I set ct-ng to use "companion tools bundled with ct-ng" ?
>>
>> Read the documentation:
>>
>> http://crosstool-ng.org/hg/crosstool-ng/raw-file/43ace4bb005e/docs/3%20-%20Configuring%20a%20toolchain.txt
>>
>>> The output of "libtool --version" is:
>>> ltmain.sh (GNU libtool) 1.5.22 (1.1220.2.365 2005/12/18 22:14:06)
>>> I used "yum install" to install it.
>>>
>>> This is weird. According to .configure --help, the minimum libtool
>>> version should be:
>>>  1.5.26
>>> But running .configure does not alert on a libtool problem.
>>> Can this cause the problem ?
>>>
>>> I tried pastebin but I should be a PRO user to paste all build.log
>>>
>>> You help is highly appreciated.
>>>
>>> Thanks,
>>> Zvika
>>>
>>> On Sat, Oct 6, 2012 at 10:10 AM, Bryan Hundven <bryanhundven@gmail.com> wrote:
>>>> On Fri, Oct 5, 2012 at 10:14 PM, Zvi Vered <veredz72@gmail.com> wrote:
>>>>> Hello,
>>>>>
>>>>> I'm using crosstool-ng 1.16.0 to create a toolchain for
>>>>> "i686-nptl-linux-gnu" under centos 5.3
>>>>>
>>>>> I got the following error:
>>>>>
>>>>> [ALL  ]    ./libtool: line 466: CDPATH: command not found
>>>>> [ALL  ]    ./libtool: line 466: CDPATH: command not found
>>>>> [ALL  ]    ./libtool: line 1144: func_opt_split: command not found
>>>>> [ALL  ]    libtool: Version mismatch error.  This is libtool 2.2.6
>>>>> Debian-2.2.6a-1ubuntu1, but the
>>>>> [ALL  ]    libtool: definition of this LT_INIT comes from an older release.
>>>>> [ALL  ]    libtool: You should recreate aclocal.m4 with macros from
>>>>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1
>>>>> [ALL  ]    libtool: and run autoconf again.
>>>>> [ERROR]    make[1]: *** [loop.lo] Error 1
>>>>> [ALL  ]    make[1]: *** Waiting for unfinished jobs....
>>>>> [ALL  ]    ./libtool: line 466: CDPATH: command not found
>>>>> [ALL  ]    ./libtool: line 1144: func_opt_split: command not found
>>>>> [ALL  ]    libtool: Version mismatch error.  This is libtool 2.2.6
>>>>> Debian-2.2.6a-1ubuntu1, but the
>>>>> [ALL  ]    libtool: definition of this LT_INIT comes from an older release.
>>>>> [ALL  ]    libtool: You should recreate aclocal.m4 with macros from
>>>>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1
>>>>> [ALL  ]    libtool: and run autoconf again.
>>>>> [ERROR]    make[1]: *** [block.lo] Error 1
>>>>> [ALL  ]    ./libtool: line 1144: func_opt_split: command not found
>>>>> [ALL  ]    libtool: Version mismatch error.  This is libtool 2.2.6
>>>>> Debian-2.2.6a-1ubuntu1, but the
>>>>> [ALL  ]    libtool: definition of this LT_INIT comes from an older release.
>>>>> [ALL  ]    libtool: You should recreate aclocal.m4 with macros from
>>>>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1
>>>>> [ALL  ]    libtool: and run autoconf again.
>>>>> [ERROR]    make[1]: *** [names.lo] Error 1
>>>>> [ALL  ]    make[1]: Leaving directory
>>>>> `/home/zvivered/GNU/ct-ng-1.16.0/working/i686-nptl-linux-gnu/build/build-cloog-ppl-host-i686-build_pc-linux-gnu'
>>>>> [ERROR]
>>>>> [ERROR]  >>
>>>>> [ERROR]  >>  Build failed in step 'Installing CLooG/PPL for host'
>>>>> [ERROR]  >>        called in step '(top-level)'
>>>>> [ERROR]  >>
>>>>> [ERROR]  >>  Error happened in: CT_DoExecLog[scripts/functions@158]
>>>>> [ERROR]  >>        called from:
>>>>> do_cloog_backend[scripts/build/companion_libs/cloog.sh@111]
>>>>> [ERROR]  >>        called from:
>>>>> do_cloog_for_host[scripts/build/companion_libs/cloog.sh@72]
>>>>> [ERROR]  >>        called from: main[scripts/crosstool-NG.sh@598]
>>>>> [ERROR]  >>
>>>>> [ERROR]  >>  For more info on this error, look at the file: 'build.log'
>>>>> [ERROR]  >>  There is a list of known issues, some with workarounds, in:
>>>>> [ERROR]  >>
>>>>> '/home/zvivered/GNU/ct-ng-1.16.0/share/doc/crosstool-ng/ct-ng.1.16.0/B
>>>>> - Known issues.txt'
>>>>> [ERROR]
>>>>> [ERROR]  (elapsed: 6:05.48)
>>>>>
>>>>> Attached config.ng (copy of .config).
>>>>>
>>>>> Can you help find the problem ?
>>>>>
>>>>> Thanks,
>>>>> Zvika
>>>>>
>>>>> --
>>>>> For unsubscribe information see http://sourceware.org/lists.html#faq
>>>>
>>>> Zvi,
>>>>
>>>> Having the full log - posted to pastebin, or similar site, or hosted
>>>> on some other web site to save space on the mailing list - would also
>>>> be very helpful in this situation.
>>>>
>>>> From what I read, it looks like you have two different versions of
>>>> libtool in the same path!?! weird!
>>>>
>>>> Have you tried cloog 0.15.11?
>>>>
>>>> As I said in my previous message about automake, try using the
>>>> companion tools bundled with ct-ng.
>>>> ( http://sourceware.org/ml/crossgcc/2012-10/msg00014.html )
>>>>
>>>>># CT_COMP_TOOLS is not set
>>>>
>>>> Not all systems are compatible with ct-ng, which is why we provide m4,
>>>> autoconf, automake, libtool, and make.
>>>>
>>>> Also, this only seems to be a problem with cloog-ppl, have you also
>>>> tried google searching around for similar cloog build errors? This
>>>> doesn't look like it would be specific to crosstool-ng, but having the
>>>> full build log might prove that otherwise.
>>>>
>>>> -Bryan
>>
>> -Bryan

-Bryan

--
For unsubscribe information see http://sourceware.org/lists.html#faq