Building crosstool-ng for MIPS on Mac OS X

[pierrick]

 Re-sending as I noticed I didn't send the answer to the list. And as I 
 hope to get an answer, here you go:

 Titus, thank you for your answer.

> at a first glance it might be the Makefile showing the error
> cannot handle the number of parallel make jobs correctly.
> At least, for some reason not shown ".deps/matrix.Tpo" does not exist
> but to my understanding it just should have been created.
> Try to reduce the job count in the ct-ng .config file for your tool 
> chain.

 I changed the number of parallel jobs from 7 to 1:

 [CFG  ]                 
 /*-----------------------------------------------*
 [CFG  ]                  *           CLooG configuration is OK          
 *
 [CFG  ]                  
 *-----------------------------------------------*/
 [CFG  ]    It appears that your system is OK to start CLooG 
 compilation. You need
 [CFG  ]    now to type "make". After compilation, you should check 
 CLooG by typing
 [CFG  ]    "make check". If no problem occur, you can type "make 
 uninstall" if
 [CFG  ]    you are upgrading an old version. Lastly type "make install" 
 to install
 [CFG  ]    CLooG on your system (log as root if necessary).
 [EXTRA]    Building CLooG/ppl
 [DEBUG]    ==> Executing: 'make -j1 libcloog.la'
 [ALL  ]    /bin/bash ./libtool  --tag=CC   --mode=compile 
 x86_64-build_apple-darwin10.7.1-gcc -DHAVE_CONFIG_H -I. 
 -I/Volumes/CrossCompilation/.build/src/cloog-ppl-0.15.10 
 -I./include/cloog -I./include 
 -I/Volumes/CrossCompilation/.build/src/cloog-ppl-0.15.10/include  
 -I/Volumes/CrossCompilation/.build/mips-unknown-elf/build/static/include 
 -I/Volumes/CrossCompilation/.build/mips-unknown-elf/build/static/include 
 -Wall -fomit-frame-pointer -pipe -MT block.lo -MD -MP -MF 
 .deps/block.Tpo -c -o block.lo `test -f 'source/block.c' || echo 
 '/Volumes/CrossCompilation/.build/src/cloog-ppl-0.15.10/'`source/block.c
 [ALL  ]    mv -f .deps/block.Tpo .deps/block.Plo
 [ALL  ]    mv: rename .deps/block.Tpo to .deps/block.Plo: No such file 
 or directory
 [ERROR]    make[1]: *** [block.lo] Error 1
 [ERROR]    Build failed in step 'Installing CLooG/ppl'
 [ERROR]    Error happened in 
 '/Volumes/CrossCompilation//lib/ct-ng-1.10.0/scripts/functions' in 
 function 'CT_DoExecLog' (line unknown, sorry)
 [ERROR]          called from 
 '/Volumes/CrossCompilation//lib/ct-ng-1.10.0/scripts/build/companion_libs/cloog.sh' 
 at line # 78 in function 'do_cloog'
 [ERROR]          called from 
 '/Volumes/CrossCompilation//lib/ct-ng-1.10.0/scripts/crosstool-NG.sh' at 
 line # 606 in function 'main'
 [ERROR]    Look at 
 '/Volumes/CrossCompilation/mips-unknown-elf/build.log' for more info on 
 this error.
 [ERROR]  (elapsed: 9:45.00)

> Which version of ct-ng do you use?

 I downloaded the latest one, 1.10.0.

> Which tool chain components and versions are you trying to build?

 Well I'm trying to build a tool chain for MIPS but didn't go too far 
 into the configuration. I used ct-mg menuconfig.

> Did you use a sample configuration?

 Does my previous answer, answers this ?

 Thank you very much for your time!

 p

--
For unsubscribe information see http://sourceware.org/lists.html#faq