Update: Still with Build failure for PPC405 using crosstool-ng-1.9.2

Chris Kerios ckerios@cfl.rr.com
Thu Jan 20 23:46:00 GMT 2011


On 01/20/2011 06:28 PM, Bryan Hundven wrote:
> On Thu, Jan 20, 2011 at 3:23 PM, Chris Kerios<ckerios@cfl.rr.com>  wrote:
>> On 01/20/2011 05:52 PM, Bryan Hundven wrote:
>>>
>>> On Thu, Jan 20, 2011 at 2:43 PM, Chris Kerios<ckerios@cfl.rr.com>    wrote:
>>>>
>>>> On Thu, Jan 20, 2011 at 6:15 AM, Kerios, Chris (KSC-ASRC-466)[ASRC
>>>> AEROSPACE CORP]<chris.kerios@nasa.gov>    wrote:
>>>>>
>>>>> -----Original Message-----
>>>>> From: Khem Raj [mailto:raj.khem@gmail.com]
>>>>> Sent: Thursday, January 20, 2011 1:17 AM
>>>>> To: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP]
>>>>> Cc: Bryan Hundven; crossgcc maillist
>>>>> Subject: Re: Update: Still with Build failure for PPC405 using
>>>>> crosstool-ng-1.9.2
>>>>>
>>>>> On Wed, Jan 19, 2011 at 6:32 PM, Khem Raj<raj.khem@gmail.com>    wrote:
>>>>>>
>>>>>> On Wed, Jan 19, 2011 at 6:14 PM, Kerios, Chris (KSC-ASRC-466)[ASRC
>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov>    wrote:
>>>>>>>
>>>>>>>
>>>>>>> Sent from my iPad
>>>>>>>
>>>>>>> On Jan 19, 2011, at 8:51 PM, "Bryan Hundven"<bryanhundven@gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> On Wed, Jan 19, 2011 at 3:00 PM, Kerios, Chris (KSC-ASRC-466)[ASRC
>>>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov>    wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Sent from my iPad
>>>>>>>>>
>>>>>>>>> On Jan 19, 2011, at 5:55 PM, "Bryan Hundven"<bryanhundven@gmail.com>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> On Wed, Jan 19, 2011 at 2:41 PM, Kerios, Chris (KSC-ASRC-466)[ASRC
>>>>>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov>    wrote:
>>>>>>>>>>>
>>>>>>>>>>> Great! I'm happy to hear you were able to reproduce. So I'm not or
>>>>>>>>>>> wasting your time.
>>>>>>>>>>> Thanks
>>>>>>>>>>
>>>>>>>>>> Opps, with the build.log.bz2 email we went off list for a moment.
>>>>>>>>>> This
>>>>>>>>>> email mostly to bring the conversation back to the list.
>>>>>>>>>>
>>>>>>>>>> Chris,
>>>>>>>>>>
>>>>>>>>>> As I asked before, it would be nice if you didn't top post.
>>>>>>>>>> Reason being is that Khem's response is now at the bottom of the
>>>>>>>>>> email
>>>>>>>>>> (like it should be), and your responses are at the top, making the
>>>>>>>>>> email hard to read.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> Sent from my iPad
>>>>>>>>>>>
>>>>>>>>>>> On Jan 19, 2011, at 5:35 PM, "Khem Raj"<raj.khem@gmail.com>
>>>>>>>>>>>   wrote:
>>>>>>>>>>>
>>>>>>>>>>>> On Wed, Jan 19, 2011 at 11:33 AM, Kerios, Chris
>>>>>>>>>>>> (KSC-ASRC-466)[ASRC
>>>>>>>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov>    wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Bryan/Khem,
>>>>>>>>>>>>> Here is the last build.log file. ĀI set the log mode to ERROR.
>>>>>>>>>>>>> So
>>>>>>>>>>>>> it may not have everything you want so I can run it again with a
>>>>>>>>>>>>> Deeper log level if you need me to.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>> From: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP]
>>>>>>>>>>>>> Sent: Wednesday, January 19, 2011 2:23 PM
>>>>>>>>>>>>> To: 'Khem Raj'; Bryan Hundven
>>>>>>>>>>>>> Cc: crossgcc@sourceware.org
>>>>>>>>>>>>> Subject: RE: Update: Still with Build failure for PPC405 using
>>>>>>>>>>>>> crosstool-ng-1.9.2
>>>>>>>>>>>>>
>>>>>>>>>>>>> Bryan/Raj,
>>>>>>>>>>>>> I've attached to output from the cross-compiler you requested.
>>>>>>>>>>>>> ĀThere's a core and static directories where these files were
>>>>>>>>>>>>> located. ĀThe
>>>>>>>>>>>>> output was the same so I am just sending the shared one. ĀIt's a
>>>>>>>>>>>>> small file
>>>>>>>>>>>>> so I've just attached it. ĀI working on compressing the build
>>>>>>>>>>>>> log and will
>>>>>>>>>>>>> get that out to you shortly.
>>>>>>>>>>>>> Chris
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>> From: Khem Raj [mailto:raj.khem@gmail.com]
>>>>>>>>>>>>> Sent: Wednesday, January 19, 2011 2:03 PM
>>>>>>>>>>>>> To: Bryan Hundven
>>>>>>>>>>>>> Cc: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP];
>>>>>>>>>>>>> crossgcc@sourceware.org
>>>>>>>>>>>>> Subject: Re: Update: Still with Build failure for PPC405 using
>>>>>>>>>>>>> crosstool-ng-1.9.2
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Wed, Jan 19, 2011 at 10:26 AM, Bryan Hundven
>>>>>>>>>>>>> <bryanhundven@gmail.com>    wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Wed, Jan 19, 2011 at 10:15 AM, Kerios, Chris
>>>>>>>>>>>>>> (KSC-ASRC-466)[ASRC
>>>>>>>>>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov>    wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> OK, let's see if I can get all this for you:
>>>>>>>>>>>>>>> On my host machine that I am trying to build for:
>>>>>>>>>>>>>>> x86 - Fedora 14
>>>>>>>>>>>>>>> gcc 4.5.1
>>>>>>>>>>>>>>> binutils 2.20
>>>>>>>>>>>>>>> linux 2.6.35
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> For my target/embedded host I am trying to build a cross
>>>>>>>>>>>>>>> toolchain which I am pasting in the beginning of the
>>>>>>>>>>>>>>> build.log:
>>>>>>>>>>>>>>> [INFO ] ĀPerforming some trivial sanity checks [INFO ] ĀBuild
>>>>>>>>>>>>>>> started
>>>>>>>>>>>>>>> 20110119.130036 [INFO ] ĀBuilding environment variables [WARN
>>>>>>>>>>>>>>> ]
>>>>>>>>>>>>>>> Directory '/home/chris/src' does not exist.
>>>>>>>>>>>>>>> [WARN ] ĀWill not save downloaded tarballs to local storage.
>>>>>>>>>>>>>>> [EXTRA] ĀPreparing working directories [EXTRA] ĀInstalling
>>>>>>>>>>>>>>> user-supplied crosstool-NG configuration [EXTRA]
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> =================================================================
>>>>>>>>>>>>>>> [EXTRA] ĀDumping internal crosstool-NG configuration [EXTRA]
>>>>>>>>>>>>>>> Building a toolchain for:
>>>>>>>>>>>>>>> [EXTRA] Ā Ā Ābuild Ā= i686-pc-linux-gnu [EXTRA] Ā Ā Āhost Ā =
>>>>>>>>>>>>>>> i686-pc-linux-gnu [EXTRA] Ā Ā Ātarget = powerpc-405-linux-gnu
>>>>>>>>>>>>>>> [EXTRA]
>>>>>>>>>>>>>>> Dumping internal crosstool-NG configuration: done in 0.46s (at
>>>>>>>>>>>>>>> 00:05)
>>>>>>>>>>>>>>> [INFO ]
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> =================================================================
>>>>>>>>>>>>>>> [INFO ] ĀRetrieving needed toolchain components' tarballs
>>>>>>>>>>>>>>> [EXTRA]
>>>>>>>>>>>>>>> Retrieving 'linux-2.6.31.14'
>>>>>>>>>>>>>>> [EXTRA] Ā ĀRetrieving 'gmp-4.3.2'
>>>>>>>>>>>>>>> [EXTRA] Ā ĀRetrieving 'mpfr-2.4.2'
>>>>>>>>>>>>>>> [EXTRA] Ā ĀRetrieving 'binutils-2.19.1'
>>>>>>>>>>>>>>> [EXTRA] Ā ĀRetrieving 'gcc-4.3.2'
>>>>>>>>>>>>>>> [EXTRA] Ā ĀRetrieving 'eglibc-2_10'
>>>>>>>>>>>>>>> [EXTRA] Ā ĀRetrieving 'dmalloc-5.5.2'
>>>>>>>>>>>>>>> [EXTRA] Ā ĀRetrieving 'duma_2_5_15'
>>>>>>>>>>>>>>> [EXTRA] Ā ĀRetrieving 'gdb-6.8'
>>>>>>>>>>>>>>> [EXTRA] Ā ĀRetrieving 'ncurses-5.7'
>>>>>>>>>>>>>>> [EXTRA] Ā ĀRetrieving 'expat-2.0.1'
>>>>>>>>>>>>>>> [INFO ] ĀRetrieving needed toolchain components' tarballs:
>>>>>>>>>>>>>>> done
>>>>>>>>>>>>>>> in
>>>>>>>>>>>>>>> 601.03s (at 10:07) [INFO ]
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> =================================================================
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Chris,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Could you post your config somewhere? Preferably on
>>>>>>>>>>>>>> pastbin.com.
>>>>>>>>>>>>>> I want to try installing fc14 and see if I can reproduce your
>>>>>>>>>>>>>> issue.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>> From: Khem Raj [mailto:raj.khem@gmail.com]
>>>>>>>>>>>>>>> Sent: Wednesday, January 19, 2011 12:55 PM
>>>>>>>>>>>>>>> To: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP]
>>>>>>>>>>>>>>> Cc: crossgcc@sourceware.org
>>>>>>>>>>>>>>> Subject: Re: Update: Still with Build failure for PPC405 using
>>>>>>>>>>>>>>> crosstool-ng-1.9.2
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Wed, Jan 19, 2011 at 9:49 AM, Kerios, Chris
>>>>>>>>>>>>>>> (KSC-ASRC-466)[ASRC
>>>>>>>>>>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov>    wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi Raj,
>>>>>>>>>>>>>>>> Hmmm...I just tried rebuilding 1.9.2 with eglibc 2.10 and it
>>>>>>>>>>>>>>>> stopped and errored out at the same spot with the same error.
>>>>>>>>>>>>>>>> 2.10 is the only other release offered in the 1.9.2
>>>>>>>>>>>>>>>> menuconfig.
>>>>>>>>>>>>>>>> ĀI
>>>>>>>>>>>>>>>> would send you my build.log except that is over 16MB
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> bzip2 build.log
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> If you want, you can send the bzip'd log file to me directly,
>>>>>>>>>>>>>> bypassing the list.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Khem, if you would like the bzip'd log as well, I will forward
>>>>>>>>>>>>>> it
>>>>>>>>>>>>>> to you.
>>>>>>>>>>>>>> Just trying to save space on the ml-server.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> yes please do send me.
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> and my email system won't transfer it. ĀI also tried
>>>>>>>>>>>>>>>> pastebin.com
>>>>>>>>>>>>>>>> but they will only take up to 1MB. ĀIs there anything
>>>>>>>>>>>>>>>> specific
>>>>>>>>>>>>>>>> in
>>>>>>>>>>>>>>>> the build log I can send you? ĀCurrently, the debug level is
>>>>>>>>>>>>>>>> set to EXTRA. ĀI can back this down and it should cut down on
>>>>>>>>>>>>>>>> some of the
>>>>>>>>>>>>>>>> file size.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> hmmm ok. What version of gcc and binutils are you using ? btw
>>>>>>>>>>>>>>> can you
>>>>>>>>>>>>>>> run<cross>-gcc -v -xc /dev/null and post the output ?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Khem,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Either build that Chris has ran have not produced the final
>>>>>>>>>>>>>> toolchain.
>>>>>>>>>>>>>> Did you mean:<host>-gcc -v -xc /dev/null -v -xc /d
>>>>>>>>>>>>>
>>>>>>>>>>>>> no he should have an intermediate gcc already built before
>>>>>>>>>>>>> building eglibc thats the one I was interested in.
>>>>>>>>>>>>>
>>>>>>>>>>>>>> ?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>> Chris
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>> From: Khem Raj [mailto:raj.khem@gmail.com]
>>>>>>>>>>>>>>>> Sent: Tuesday, January 18, 2011 11:44 PM
>>>>>>>>>>>>>>>> To: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP]
>>>>>>>>>>>>>>>> Cc: crossgcc@sourceware.org
>>>>>>>>>>>>>>>> Subject: Re: Update: Still with Build failure for PPC405
>>>>>>>>>>>>>>>> using
>>>>>>>>>>>>>>>> crosstool-ng-1.9.2
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On (18/01/11 14:45), Kerios, Chris (KSC-ASRC-466)[ASRC
>>>>>>>>>>>>>>>> AEROSPACE CORP] wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hello again,
>>>>>>>>>>>>>>>>> I think I have worked my way through enough builds, etc. to
>>>>>>>>>>>>>>>>> form a coherent email regarding my cross tool build effort
>>>>>>>>>>>>>>>>> and problem. ĀI
>>>>>>>>>>>>>>>>> have attached two files of the Ābuild logs that show where
>>>>>>>>>>>>>>>>> the builds are
>>>>>>>>>>>>>>>>> breaking. I cannot send the whole log as my email system
>>>>>>>>>>>>>>>>> won't pass it. ĀAs
>>>>>>>>>>>>>>>>> I am not a gnu tools expert I can only pursue the most
>>>>>>>>>>>>>>>>> elementary fixes of
>>>>>>>>>>>>>>>>> which I can't decipher these. ĀI've looked through the
>>>>>>>>>>>>>>>>> mailing list as well.
>>>>>>>>>>>>>>>>> First the configuration:
>>>>>>>>>>>>>>>>> Host build machine: x86, Fedora Core 14 with most recent
>>>>>>>>>>>>>>>>> updates applied.
>>>>>>>>>>>>>>>>> Target machine: MPL powerpc-405gp
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Per my email from last week I received a suggestion to back
>>>>>>>>>>>>>>>>> port my make version from the Fedora 14 version of make 3.82
>>>>>>>>>>>>>>>>> to make 3.81.
>>>>>>>>>>>>>>>>> ĀI have done this and the build goes significantly further
>>>>>>>>>>>>>>>>> than before. ĀThe
>>>>>>>>>>>>>>>>> build is now breaking during "Installing C library". ĀIt
>>>>>>>>>>>>>>>>> appears to be
>>>>>>>>>>>>>>>>> looking for -lgcc and not finding it. ĀIn looking at the gcc
>>>>>>>>>>>>>>>>> command above
>>>>>>>>>>>>>>>>> it there is a section after the 4.3.2 which looks wrong as
>>>>>>>>>>>>>>>>> it has a bunch of
>>>>>>>>>>>>>>>>> ../../.. but I can't be sure and I don't know where all
>>>>>>>>>>>>>>>>> these paths are
>>>>>>>>>>>>>>>>> defined. ĀThe make 3.82 build breaks immediately at the
>>>>>>>>>>>>>>>>> "Installing kernel
>>>>>>>>>>>>>>>>> headers" phase.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> As another data point I have built crosstool successfully on
>>>>>>>>>>>>>>>>> the 1.6.[0-2] versions. ĀStarting on versions 1.7 and beyond
>>>>>>>>>>>>>>>>> these problems
>>>>>>>>>>>>>>>>> appear. ĀI don't know if anyone has built for PPC 405 in a
>>>>>>>>>>>>>>>>> while so this may
>>>>>>>>>>>>>>>>> be why these problems cropped up and weren't identified.
>>>>>>>>>>>>>>>>> ĀAnyway, any help
>>>>>>>>>>>>>>>>> on this would be appreciated as I'm not all that keen on
>>>>>>>>>>>>>>>>> running 1.6.2 if I
>>>>>>>>>>>>>>>>> don't have to. ĀI would like to stay current.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> If you really do not need to stick to eglibc 2.9 then I would
>>>>>>>>>>>>>>>> suggest to use 2.12 if possible.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Can you post all logs somewhere I could not infer what could
>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>> wrong from the Āattached logs
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> -Khem
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> -Bryan
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> OK the problem is reproducible with your config. What I see is
>>>>>>>>>>>> that
>>>>>>>>>>>> gcc-shared installs symlink to shared libgcc but does not install
>>>>>>>>>>>> the
>>>>>>>>>>>> shared libgcc itself
>>>>>>>>>>>> into the temporary sysroot its using. I am still waiting on
>>>>>>>>>>>> validating
>>>>>>>>>>>> this (my system is really slow). I see that ct-ng called make
>>>>>>>>>>>> install-libgcc I hope that should
>>>>>>>>>>>> have done the job but it seems it did not.
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Khem,
>>>>>>>>>>
>>>>>>>>>> My build is much slower then your's. ugh... vmware fusion...
>>>>>>>>>>
>>>>>>>>>> Now that I have a fc14 install, I am going to see what I can do
>>>>>>>>>> about
>>>>>>>>>> these make 3.82 issues.
>>>>>>>>>>
>>>>>>>>>> -Bryan
>>>>>>>>>
>>>>>>>>> Oops sorry...understood.
>>>>>>>>
>>>>>>>> No problems.
>>>>>>>>
>>>>>>>> So I was also able to reproduce the build issue with make 3.81 on
>>>>>>>> fc14.
>>>>>>>> I then tried to build 4.3.5 to see if that release fixes this issue.
>>>>>>>> It also broke in the same spot with the same error.
>>>>>>>>
>>>>>>>> Chris, would you have any problem moving to gcc-4.4? Or do you need
>>>>>>>> 4.3.x for reason?
>>>>>>>> I'm going to try building 4.4.5 tonight, and my hope is that it
>>>>>>>> installs libgcc correctly.
>>>>>>>>
>>>>>>>> -Bryan
>>>>>>>
>>>>>>> I have no problems at all going to 4.4. Are you thinking its a gcc
>>>>>>> issue?
>>>>>>
>>>>>> OK then please try with gcc 4.5.2 or 4.4.4
>>>>>>
>>>>>
>>>>> I tried with gcc 4.5.2 and 4.4.4 both install libgcc_s.so.1 correclty
>>>>> and the build passes this point of failure
>>>>>
>>>>> Good Morning,
>>>>> I just tried building it with 4.4.4 and was unsuccessful. ĀIt's not
>>>>> getting past the CLoog/ppl build. ĀJust a reminder, I am on x86 Fedora
>>>>> 14
>>>>> and had binutils 2.20.1 and eglibc 2.10 selected. ĀAlso, I am still
>>>>> using
>>>>> make 3.81 as it blows up right in the beginning on the kernel headers
>>>>> steps.
>>>>> ĀI have attached the build.log. ĀI am going to try a 4.5.1. build now.
>>>>> ĀRaj,
>>>>> what are you using for a host build environment?
>>>>> Regards,
>>>>> Chris
>>>>>
>>>>
>>>> Here is a modified version of your .config that built a 4.5.2 based
>>>> toolchain successfully
>>>> on ubuntu 10.04/x86
>>>>
>>>> -Khem
>>>>
>>>>
>>>>
>>>> Sorry Khem, but the build does not work on Fedora 14 with your config
>>>> file.
>>>>   There must be some difference(s) that are causing these problems we are
>>>> seeing.  Debian vs. Fedora.  eglibc based system vs. glibc based
>>>> system???
>>>>   I have attached the build.log.  It dies early when it begins the CLooG
>>>> build.
>>>>
>>>> Bryan: Have you had any luck with your Fedora system?
>>>>
>>>> Regards,
>>>> Chris
>>>>
>>>> Attachment: .config
>>>> Description: Binary data
>>>>
>>>
>>> I downgraded cloog-ppl to 0.15.9 and am using gcc-4.4.5, and now I get
>>> a problem while building the static core gcc where it can't find
>>> -lstdc++. I think this is a problem with either cloog-ppl or binutils.
>>> Not sure yet.
>>> *grumble*
>>>
>>> It sounds like this architecture/distribution combination needs some love.
>>>
>>> Attached is my current config:
>>
>> I was just reading the archive and noticed there is a patch for the
>> CLooG/ppl problem that I am encountering. I've applied the patch and have
>> started another build.  Disregard my previous email on that problem. I will
>> let everyone know how this next build goes.
>
> Ah, I made a mistake then. I thought that patch was in 1.9.2. (From my
> conversation in another thread with Yann.)
> I will try that as well.
>
>> I didn't realize the static libstdc++ is needed.  I am downloading and
>> installing now.
>
> Right, the static libstdc++ is part of the libstdc++6 dev package on
> debian. We should document this.
>
> -Bryan
>

It bombed.  Here are the config files. I saw no real difference in our 
config files.

Let me know if you want me to run another config.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: build.log.bz2
Type: application/x-bzip
Size: 852859 bytes
Desc: not available
URL: <http://sourceware.org/pipermail/crossgcc/attachments/20110120/a841cab4/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: powerpc405config.bz2
Type: application/x-bzip
Size: 2711 bytes
Desc: not available
URL: <http://sourceware.org/pipermail/crossgcc/attachments/20110120/a841cab4/attachment-0001.bin>
-------------- next part --------------
--
For unsubscribe information see http://sourceware.org/lists.html#faq


More information about the crossgcc mailing list