Update: Still with Build failure for PPC405 using crosstool-ng-1.9.2

Bryan Hundven bryanhundven@gmail.com
Wed Jan 19 22:55:00 GMT 2011


On Wed, Jan 19, 2011 at 2:41 PM, Kerios, Chris (KSC-ASRC-466)[ASRC
AEROSPACE CORP] <chris.kerios@nasa.gov> wrote:
> Great! I'm happy to hear you were able to reproduce. So I'm not or wasting your time.
> Thanks

Opps, with the build.log.bz2 email we went off list for a moment. This
email mostly to bring the conversation back to the list.

Chris,

As I asked before, it would be nice if you didn't top post.
Reason being is that Khem's response is now at the bottom of the email
(like it should be), and your responses are at the top, making the
email hard to read.


> Sent from my iPad
>
> On Jan 19, 2011, at 5:35 PM, "Khem Raj" <raj.khem@gmail.com> wrote:
>
>> On Wed, Jan 19, 2011 at 11:33 AM, Kerios, Chris (KSC-ASRC-466)[ASRC
>> AEROSPACE CORP] <chris.kerios@nasa.gov> wrote:
>>> Bryan/Khem,
>>> Here is the last build.log file.  I set the log mode to ERROR. So it may not have everything you want so I can run it again with a
>>> Deeper log level if you need me to.
>>>
>>>
>>> -----Original Message-----
>>> From: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP]
>>> Sent: Wednesday, January 19, 2011 2:23 PM
>>> To: 'Khem Raj'; Bryan Hundven
>>> Cc: crossgcc@sourceware.org
>>> Subject: RE: Update: Still with Build failure for PPC405 using crosstool-ng-1.9.2
>>>
>>> Bryan/Raj,
>>> I've attached to output from the cross-compiler you requested.  There's a core and static directories where these files were located.  The output was the same so I am just sending the shared one.  It's a small file so I've just attached it.  I working on compressing the build log and will get that out to you shortly.
>>> Chris
>>>
>>>
>>>
>>> -----Original Message-----
>>> From: Khem Raj [mailto:raj.khem@gmail.com]
>>> Sent: Wednesday, January 19, 2011 2:03 PM
>>> To: Bryan Hundven
>>> Cc: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP]; crossgcc@sourceware.org
>>> Subject: Re: Update: Still with Build failure for PPC405 using crosstool-ng-1.9.2
>>>
>>> On Wed, Jan 19, 2011 at 10:26 AM, Bryan Hundven <bryanhundven@gmail.com> wrote:
>>>> On Wed, Jan 19, 2011 at 10:15 AM, Kerios, Chris (KSC-ASRC-466)[ASRC
>>>> AEROSPACE CORP] <chris.kerios@nasa.gov> wrote:
>>>>> OK, let's see if I can get all this for you:
>>>>> On my host machine that I am trying to build for:
>>>>> x86 - Fedora 14
>>>>> gcc 4.5.1
>>>>> binutils 2.20
>>>>> linux 2.6.35
>>>>>
>>>>> For my target/embedded host I am trying to build a cross toolchain which I am pasting in the beginning of the build.log:
>>>>> [INFO ]  Performing some trivial sanity checks [INFO ]  Build started
>>>>> 20110119.130036 [INFO ]  Building environment variables [WARN ]
>>>>> Directory '/home/chris/src' does not exist.
>>>>> [WARN ]  Will not save downloaded tarballs to local storage.
>>>>> [EXTRA]  Preparing working directories [EXTRA]  Installing
>>>>> user-supplied crosstool-NG configuration [EXTRA]
>>>>> =================================================================
>>>>> [EXTRA]  Dumping internal crosstool-NG configuration [EXTRA]
>>>>> Building a toolchain for:
>>>>> [EXTRA]      build  = i686-pc-linux-gnu [EXTRA]      host   =
>>>>> i686-pc-linux-gnu [EXTRA]      target = powerpc-405-linux-gnu [EXTRA]
>>>>> Dumping internal crosstool-NG configuration: done in 0.46s (at 00:05)
>>>>> [INFO ]
>>>>> =================================================================
>>>>> [INFO ]  Retrieving needed toolchain components' tarballs [EXTRA]
>>>>> Retrieving 'linux-2.6.31.14'
>>>>> [EXTRA]    Retrieving 'gmp-4.3.2'
>>>>> [EXTRA]    Retrieving 'mpfr-2.4.2'
>>>>> [EXTRA]    Retrieving 'binutils-2.19.1'
>>>>> [EXTRA]    Retrieving 'gcc-4.3.2'
>>>>> [EXTRA]    Retrieving 'eglibc-2_10'
>>>>> [EXTRA]    Retrieving 'dmalloc-5.5.2'
>>>>> [EXTRA]    Retrieving 'duma_2_5_15'
>>>>> [EXTRA]    Retrieving 'gdb-6.8'
>>>>> [EXTRA]    Retrieving 'ncurses-5.7'
>>>>> [EXTRA]    Retrieving 'expat-2.0.1'
>>>>> [INFO ]  Retrieving needed toolchain components' tarballs: done in
>>>>> 601.03s (at 10:07) [INFO ]
>>>>> =================================================================
>>>>
>>>> Chris,
>>>>
>>>> Could you post your config somewhere? Preferably on pastbin.com.
>>>> I want to try installing fc14 and see if I can reproduce your issue.
>>>>
>>>>> -----Original Message-----
>>>>> From: Khem Raj [mailto:raj.khem@gmail.com]
>>>>> Sent: Wednesday, January 19, 2011 12:55 PM
>>>>> To: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP]
>>>>> Cc: crossgcc@sourceware.org
>>>>> Subject: Re: Update: Still with Build failure for PPC405 using
>>>>> crosstool-ng-1.9.2
>>>>>
>>>>> On Wed, Jan 19, 2011 at 9:49 AM, Kerios, Chris (KSC-ASRC-466)[ASRC
>>>>> AEROSPACE CORP] <chris.kerios@nasa.gov> wrote:
>>>>>> Hi Raj,
>>>>>> Hmmm...I just tried rebuilding 1.9.2 with eglibc 2.10 and it stopped and errored out at the same spot with the same error.
>>>>>> 2.10 is the only other release offered in the 1.9.2 menuconfig.  I
>>>>>> would send you my build.log except that is over 16MB
>>>>
>>>> bzip2 build.log
>>>>
>>>> If you want, you can send the bzip'd log file to me directly,
>>>> bypassing the list.
>>>>
>>>> Khem, if you would like the bzip'd log as well, I will forward it to you.
>>>> Just trying to save space on the ml-server.
>>>
>>>
>>> yes please do send me.
>>>
>>>>
>>>>>> and my email system won't transfer it.  I also tried pastebin.com
>>>>>> but they will only take up to 1MB.  Is there anything specific in
>>>>>> the build log I can send you?  Currently, the debug level is set to EXTRA.  I can back this down and it should cut down on some of the file size.
>>>>>
>>>>> hmmm ok. What version of gcc and binutils are you using ? btw can you
>>>>> run <cross>-gcc -v -xc /dev/null and post the output ?
>>>>
>>>> Khem,
>>>>
>>>> Either build that Chris has ran have not produced the final toolchain.
>>>> Did you mean: <host>-gcc -v -xc /dev/null -v -xc /d
>>>
>>> no he should have an intermediate gcc already built before building eglibc thats the one I was interested in.
>>>
>>>> ?
>>>>
>>>>>
>>>>>> Regards,
>>>>>> Chris
>>>>>>
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Khem Raj [mailto:raj.khem@gmail.com]
>>>>>> Sent: Tuesday, January 18, 2011 11:44 PM
>>>>>> To: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP]
>>>>>> Cc: crossgcc@sourceware.org
>>>>>> Subject: Re: Update: Still with Build failure for PPC405 using
>>>>>> crosstool-ng-1.9.2
>>>>>>
>>>>>> On (18/01/11 14:45), Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP] wrote:
>>>>>>> Hello again,
>>>>>>> I think I have worked my way through enough builds, etc. to form a coherent email regarding my cross tool build effort and problem.  I have attached two files of the  build logs that show where the builds are breaking. I cannot send the whole log as my email system won't pass it.  As I am not a gnu tools expert I can only pursue the most elementary fixes of which I can't decipher these.  I've looked through the mailing list as well.
>>>>>>> First the configuration:
>>>>>>> Host build machine: x86, Fedora Core 14 with most recent updates applied.
>>>>>>> Target machine: MPL powerpc-405gp
>>>>>>>
>>>>>>> Per my email from last week I received a suggestion to back port my make version from the Fedora 14 version of make 3.82 to make 3.81.  I have done this and the build goes significantly further than before.  The build is now breaking during "Installing C library".  It appears to be looking for -lgcc and not finding it.  In looking at the gcc command above it there is a section after the 4.3.2 which looks wrong as it has a bunch of ../../.. but I can't be sure and I don't know where all these paths are defined.  The make 3.82 build breaks immediately at the "Installing kernel headers" phase.
>>>>>>>
>>>>>>> As another data point I have built crosstool successfully on the 1.6.[0-2] versions.  Starting on versions 1.7 and beyond these problems appear.  I don't know if anyone has built for PPC 405 in a while so this may be why these problems cropped up and weren't identified.  Anyway, any help on this would be appreciated as I'm not all that keen on running 1.6.2 if I don't have to.  I would like to stay current.
>>>>>>>
>>>>>>
>>>>>> If you really do not need to stick to eglibc 2.9 then I would
>>>>>> suggest to use 2.12 if possible.
>>>>>>
>>>>>> Can you post all logs somewhere I could not infer what could be
>>>>>> wrong from the  attached logs
>>>>>>
>>>>>> -Khem
>>>>>>
>>>>>
>>>>
>>>> -Bryan
>>>>
>>>
>>
>> OK the problem is reproducible with your config. What I see is that
>> gcc-shared installs symlink to shared libgcc but does not install the
>> shared libgcc itself
>> into the temporary sysroot its using. I am still waiting on validating
>> this (my system is really slow). I see that ct-ng called make
>> install-libgcc I hope that should
>> have done the job but it seems it did not.
>

Khem,

My build is much slower then your's. ugh... vmware fusion...

Now that I have a fc14 install, I am going to see what I can do about
these make 3.82 issues.

-Bryan

--
For unsubscribe information see http://sourceware.org/lists.html#faq



More information about the crossgcc mailing list