Build Failure for PPC405 using crosstool-ng 1.9.2

Bryan Hundven bryanhundven@gmail.com
Thu Jan 13 19:52:00 GMT 2011


On Thu, Jan 13, 2011 at 11:46 AM, Kerios, Chris (KSC-ASRC-466)[ASRC
AEROSPACE CORP] <chris.kerios@nasa.gov> wrote:
> OK I've done it but I've never used pastebin.com before so I don't know how you find it out there.  I've also attached a copy of the log file.

[ALL  ]    make[1]: Entering directory
`/home/chris/Embedded/crosstool-ng-1.9.2/.build/src/linux-2.6.27.55'

[ALL  ]    /home/chris/Embedded/crosstool-ng-1.9.2/.build/src/linux-2.6.27.55/arch/powerpc/Makefile:164:
*** mixed implicit and normal rules.  Stop.

Do you happen to be building on fedora or redhat?

There is a known issue with Make 3.82.
Maybe build 3.81 and install it to ${HOME}/make
and add:

export PATH="${HOME}/make/bin:$PATH"

to your bash profile.

>
> -----Original Message-----
> From: Bryan Hundven [mailto:bryanhundven@gmail.com]
> Sent: Thursday, January 13, 2011 2:27 PM
> To: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP]
> Cc: crossgcc@sourceware.org
> Subject: Re: Build Failure for PPC405 using crosstool-ng 1.9.2
>
> On Thu, Jan 13, 2011 at 11:20 AM, Kerios, Chris (KSC-ASRC-466)[ASRC
> AEROSPACE CORP] <chris.kerios@nasa.gov> wrote:
>> Hello,
>> I am new to crosstool-ng so please forgive me if my question is redundant or stupid.  I have been through the mail list archive and Google and can't find anything on this.  I am trying to build a cross toolchain for a PPC405 embedded SBC.  I have gone through and installed the software correctly and went with a config created by the following commands:
>>
>> ./configure -local
>> make
>> make install
>> ./ct-ng powerpc-405-linux-gnu
>> ./ct-ng build
>>
>> The software goes out and downloads the software and then begins/completes patching the software packages.  It is blowing up on the Installing Linux headers with the following error:
>>
>> [INFO ]  Extracting and patching toolchain components
>> [EXTRA]    Extracting 'linux-2.6.27.55'
>> [EXTRA]    Patching 'linux-2.6.27.55'
>> [EXTRA]    Extracting 'gmp-4.3.2'
>> [EXTRA]    Patching 'gmp-4.3.2'
>> [EXTRA]    Extracting 'mpfr-2.4.2'
>> [EXTRA]    Patching 'mpfr-2.4.2'
>> [EXTRA]    Extracting 'binutils-2.19.1'
>> [EXTRA]    Patching 'binutils-2.19.1'
>> [EXTRA]    Extracting 'gcc-4.3.2'
>> [EXTRA]    Patching 'gcc-4.3.2'
>> [EXTRA]    Extracting 'glibc-2.9'
>> [EXTRA]    Patching 'glibc-2.9'
>> [EXTRA]    Extracting 'glibc-ports-2.9'
>> [EXTRA]    Patching 'glibc-ports-2.9'
>> [EXTRA]    Extracting 'dmalloc-5.5.2'
>> [EXTRA]    Patching 'dmalloc-5.5.2'
>> [EXTRA]    Extracting 'duma_2_5_15'
>> [EXTRA]    Patching 'duma-2_5_15'
>> [EXTRA]    Extracting 'gdb-6.8'
>> [EXTRA]    Patching 'gdb-6.8'
>> [EXTRA]    Extracting 'ncurses-5.7'
>> [EXTRA]    Patching 'ncurses-5.7'
>> [EXTRA]    Extracting 'expat-2.0.1'
>> [EXTRA]    Patching 'expat-2.0.1'
>> [INFO ]  Extracting and patching toolchain components: done in 165.79s (at 08:10)
>> [INFO ]  =================================================================
>> [INFO ]  Installing kernel headers
>> [EXTRA]    Installing kernel headers
>> [ERROR]    make[1]: *** [sub-make] Error 2
>> [ERROR]    Build failed in step 'Installing kernel headers'
>> [ERROR]    Error happened in '/home/chris/Embedded/crosstool-ng-1.9.2/scripts/functions' in function 'CT_DoExecLog' (line unknown, sorry)
>> [ERROR]          called from '/home/chris/Embedded/crosstool-ng-1.9.2/scripts/build/kernel/linux.sh' at line # 98 in function 'do_kernel_install'
>> [ERROR]          called from '/home/chris/Embedded/crosstool-ng-1.9.2/scripts/build/kernel/linux.sh' at line # 75 in function 'do_kernel_headers'
>> [ERROR]          called from '/home/chris/Embedded/crosstool-ng-1.9.2/scripts/crosstool-NG.sh' at line # 597 in function 'main'
>> [ERROR]    Look at '/home/chris/x-tools/powerpc-405-linux-gnu/build.log' for more info on this error.
>> [ERROR]  (elapsed: 8:10.67)
>> [08:12] / make: *** [build] Error 2
>>
>> Is there something about PowerPC I am not aware of?  Seems pretty early in the build to blow up on standard setup/config for GNU builds.  Any help would be appreciated.
>
> If you could post
> '/home/chris/x-tools/powerpc-405-linux-gnu/build.log' and your config
> to http://pastebin.com/ , it would better help us help you ;)
>
>> Thanks,
>> Chris
>>
>>
>> --
>> For unsubscribe information see http://sourceware.org/lists.html#faq
>>
>>
>
>
> -Bryan
>



-- 
Bryan Hundven
bryanhundven@gmail.com

--
For unsubscribe information see http://sourceware.org/lists.html#faq



More information about the crossgcc mailing list