Failed to make h8300 toolchain.

[ariga masahiro]

Hello everyone,

I tried to install h8300-elf ToolChain on Cygwin
using next sources.But I was encountered Segmentation errors like below,
and I am now in serious predicament.
Please help me.

Before installing h8300-elf ToolChain,I previously installed eCos source 
specifying pre_built sh-elf.
After that I tried to install h8300-elf ToolChain.

<Sources>
binutils-2.19.1.tar.bz2
gcc-4.3.2.tar.bz2
newlib-1.16.0.tar.gz

I decompressed these in /src.

To do installation I made shell scripts.
I append these scripts below,please refer them.

I worked under /tmp/build
/tmp--
      |--build--                   : here is setup.sh
                |--build_binutils  : here is binutilsbuild.sh
                |--build_gcc       : here is buildgcc.sh

First of all I inserted newlib-1.16.0/newlib , newlib-1.16.0/libgloss into 
gcc-4.3.2
in order to build in one-time.
$ cd /src
$ mv newlib-1.16.0/newlib gcc-4.3.2
$ mv newlib-1.16.0/libgloss gcc-4.3.2

And I built binutils and succeeded.
$ cd /tmp/build
$ . setup.sh
$ cd build_binutils
$ . binutilsbuild.sh

Next I tried ti build h8300-elf-gcc and encountered next error.
$ cd build_gcc
$ . buildgcc.sh

<error>
/tmp/build/build_gcc/./gcc/xgcc -B/tmp/build/build_gcc/./gcc/ -nostdinc -B/tmp/build/build_gcc/h8300-elf/h8300s/normal/newlib/ 
 -isystem /tmp/build/build_gcc/h8300-elf/h8300s/normal/newlib/targ-include
 -isystem 
/src/gcc-4.3.2/newlib/libc/include -B/gnutools/h8300-elf/bin/ -B/gnutools/h8300-elf/lib/ 
 -isystem /gnutools/h8300-elf/include -isystem 
/gnutools/h8300-elf/sys-include  -ms -mn -DPACKAGE_NAME
=\"newlib\" -DPACKAGE_TARNAME=\"newlib\" -DPACKAGE_VERSION=\"1.16.0\" -DPACKAGE_STRING=\"newlib\ 
1.16.0\" -DPACKAGE_BUGREPORT=\"\" -I. -I/src/gcc-4.3.2/newlib/libm/math -I/src/gcc-4.3.2/newlib/libm/ma
th/../common -O2 -DSMALL_DTOA -DSMALL_MEMORY -fno-builtin      -O2 -g -g -O2 
    -ms -mn -c -o lib_a-wf_lgamma.o `test -f 'wf_lgamma.c' || echo 
'/src/gcc-4.3.2/newlib/libm/math/'`wf_lgamma.c
In file included from /src/gcc-4.3.2/newlib/libc/include/math.h:5,
                 from /src/gcc-4.3.2/newlib/libm/math/../common/fdlibm.h:15,
                 from /src/gcc-4.3.2/newlib/libm/math/wf_lgamma.c:17:
/src/gcc-4.3.2/newlib/libc/include/sys/reent.h:95: internal compiler error: 
Segmentation fault
Please submit a full bug report,
with preprocessed source if appropriate.
See <http://gcc.gnu.org/bugs.html> for instructions.
make[8]: *** [lib_a-wf_lgamma.o] Error 1
make[8]: Leaving directory 
`/tmp/build/build_gcc/h8300-elf/h8300s/normal/newlib/libm/math'
make[7]: *** [all-recursive] Error 1
make[7]: Leaving directory 
`/tmp/build/build_gcc/h8300-elf/h8300s/normal/newlib/libm'
make[6]: *** [all-recursive] Error 1
make[6]: Leaving directory 
`/tmp/build/build_gcc/h8300-elf/h8300s/normal/newlib'
make[5]: *** [all] Error 2
make[5]: Leaving directory 
`/tmp/build/build_gcc/h8300-elf/h8300s/normal/newlib'
make[4]: *** [multi-do] Error 1
make[4]: Leaving directory `/tmp/build/build_gcc/h8300-elf/newlib'
make[3]: *** [all-multi] Error 2
make[3]: Leaving directory `/tmp/build/build_gcc/h8300-elf/newlib'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/tmp/build/build_gcc/h8300-elf/newlib'
make[1]: *** [all-target-newlib] Error 2
make[1]: Leaving directory `/tmp/build/build_gcc'
make: *** [all] Error 2
make: Leaving directory `/tmp/build/build_gcc'
link@group129 /tmp/build/build_gcc
-- end of error

-- Shell scripts--
<setup.sh>　　　　　
export TARGET=h8300-elf
export PREFIX=/gnutools

<binutilsbuild.sh>
/src/binutils-2.19.1/configure --target=$TARGET --prefix=$PREFIX -v 2>&1 | 
tee configure.out
make -w all install 2>&1 | tee make.out

<buildgcc.sh>
/src/gcc-4.3.2/configure --target=$TARGET --prefix=$PREFIX --enable-languages=c,c++ 
 --with-gnu-as --with-gnu-ld --with-newlib --with-ggxx-include-dir=/gnutools/sh-elf/include 
 -v  2>&1 | tee configgcc.out
make -w all install 2>&1 | tee makegcc.txt

I alse send configgcc.out,makegcc.txt.
Please help me.

Masahiro Ariga 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: logfiles.tar.gz
Type: application/x-gzip
Size: 168753 bytes
Desc: not available
URL: <http://sourceware.org/pipermail/crossgcc/attachments/20090618/7a1fd04a/attachment.bin>
-------------- next part --------------
--
For unsubscribe information see http://sourceware.org/lists.html#faq