init hang after upgrading ARM-Linux toolchain
Bill Gatliff
bgat@billgatliff.com
Thu May 18 22:20:00 GMT 2006
Matthew:
Creech, Matthew L wrote:
>Hi,
>
>I'm using a 2.6.16 kernel on an AT91 ARM board. With all the positive
>reports recently of people using gcc-4/EABI/NTPL, I decided to make a
>clean break and try my luck with a new toolchain. I applied Michael
>Edwards' variation on Martin Guy's patch to crosstool-0.42:
>
>http://sourceware.org/ml/crossgcc/2006-04/msg00187.html
>
>This toolchain produced a [seemingly] working kernel, but the system
>would hang after "freeing init memory". I re-built the
>gcc-4.1.0-glibc-2.4 toolchain for an "arm-linux" target (non-EABI) to
>see if that would help isolate the problem. The new toolchain exhibits
>the same behavior as the old one, so EABI doesn't seem to be the
>problem, as far as I can tell.
>
>
Is your console pointed to a live device? Is your inittab different
between the two kernels, and one of them is aiming your console to the
wrong serial port/device?
b.g.
--
Bill Gatliff
bgat@billgatliff.com
--
For unsubscribe information see http://sourceware.org/lists.html#faq
More information about the crossgcc
mailing list