glibc 2.5+nptl build for arm softfloat eabi
Khem Raj
kraj@mvista.com
Wed Dec 20 17:49:00 GMT 2006
Hi Sean
The patch has -nounpack in the demo-arm-softfloat-eabi.sh. Please remove
that option and try again. Let me know of any other issues you see
I forgot to remove this.
Thanks
Khem
Sean Kelley said the following on 12/20/2006 05:13 AM:
> On 12/20/06, Sean Kelley <sean.v.kelley@gmail.com> wrote:
>> Hi,
>>
>> On 12/11/06, Khem Raj <kraj@mvista.com> wrote:
>> > Hi Dan and All
>> >
>> > This patch below adds support for glibc 2.5 based toolchain on arm its
>> > using the existing nptl patch on crosstool-0.43
>> >
>> > The component versions
>> >
>> > GCC = 4.1.1
>> > binutils = 2.17
>> > glibc = 2.5
>> >
>> >
>> > This patch does few things
>> >
>> > 1. Adds support for glibc 2.5 and ports
>> > 2. Support for linux-kernel-headers using make headers_install
>> (2.6.18 plus)
>> > 3. Binutils 2.17
>> > 4. ARM EABI build configuration using NPTL
>> >
>> > I have done successful builds using demo-i686 and
>> > demo-arm-softfloat-eabi only haven't tested on other arches (help
>> needed)
>>
>> Is this patch all that is required on top of crosstool-0.43 or are
>> there other patches that must be applied first?
>>
>> Thanks,
>>
>> Sean
>
>
> When I build with your patch on crosstool-0.43 for
> demo-arm-softfloat-eabi.sh, I get the following error. Hence, my
> question above.
>
> See attached text output.
>
> Sean
>
>
>>
>> >
>> > The nptl build changes the build sequence a bit where gcc static is
>> > built before building glibc-headers and startup files and uses a gcc
>> > with shared libs to do the glibc build.
>> >
>> > It also introduces a new environment variables GLIBC_ADDON_NPTL and
>> > GLIBC_ADDON_LINUXTHREADS to select the thread library to build.
>> >
>> > It also deals with the addons for glibc especially ports addon and
>> libidn.
>> >
>> > I have particularly ignored nptl with gcc < 4.1
>> >
>> > There were only two patches needed one for arm-softfloat in gcc and
>> > another one in glibc to support the latest kernel header changes.
>> >
>> > Thanks
>> >
>> > --
>> > Khem Raj
>> > MontaVista Software Inc.
>> > kraj@mvista.com
>> >
>> >
>> >
>> > diff -Naurp crosstool-0.43.orig/arm-softfloat-eabi.dat
>> crosstool-0.43/arm-softfloat-eabi.dat
>> > --- crosstool-0.43.orig/arm-softfloat-eabi.dat 1969-12-31
>> 16:00:00.000000000 -0800
>> > +++ crosstool-0.43/arm-softfloat-eabi.dat 2006-12-08
>> 02:23:16.000000000 -0800
>> > @@ -0,0 +1,4 @@
>> > +TARGET=arm-softfloat-linux-gnueabi
>> > +TARGET_CFLAGS="-O"
>> > +GCC_EXTRA_CONFIG="--with-float=soft"
>> > +GLIBC_EXTRA_CONFIG="--without-fp"
>> > diff -Naurp crosstool-0.43.orig/crosstool.sh
>> crosstool-0.43/crosstool.sh
>> > --- crosstool-0.43.orig/crosstool.sh 2006-12-06
>> 16:17:40.000000000 -0800
>> > +++ crosstool-0.43/crosstool.sh 2006-12-11 10:54:52.000000000 -0800
>> > @@ -68,17 +68,20 @@ TOP_DIR=${TOP_DIR-`pwd`}
>> > chmod 755 $TOP_DIR/config.guess
>> > BUILD=${GCC_BUILD-`$TOP_DIR/config.guess`}
>> > test -z "$BUILD" && abort "bug: BUILD not set?!"
>> > -
>> > +test -n "`echo $GLIBCTHREADS_FILENAME | grep linuxthreads`" &&
>> GLIBC_ADDON_LINUXTHREADS=1
>> > +test -n "`echo $GLIBCTHREADS_FILENAME | grep nptl`" &&
>> GLIBC_ADDON_NPTL=1
>> > if test -z "${GLIBC_ADDON_OPTIONS}"; then
>> > - echo "GLIBC_ADDON_OPTIONS not set, so guessing addons from
>> GLIBCTHREADS_FILENAME and GLIBCCRYPT_FILENAME"
>> > - # this is lame, need to fix this for nptl later?
>> > - # (nptl is an addon, but it's shipped in the main tarball)
>> > + echo "GLIBC_ADDON_OPTIONS not set"
>> > GLIBC_ADDON_OPTIONS="="
>> > - case "${GLIBCTHREADS_FILENAME}" in
>> > - *linuxthreads*)
>> GLIBC_ADDON_OPTIONS="${GLIBC_ADDON_OPTIONS}linuxthreads," ;;
>> > - esac
>> > + if test '!' -z ${GLIBC_ADDON_LINUXTHREADS}; then
>> > + GLIBC_ADDON_OPTIONS="${GLIBC_ADDON_OPTIONS}linuxthreads,"
>> > + test -z "${GLIBCCRYPT_FILENAME}" ||
>> GLIBC_ADDON_OPTIONS="${GLIBC_ADDON_OPTIONS}crypt,"
>> > + elif test '!' -z ${GLIBC_ADDON_NPTL}; then
>> > + GLIBC_ADDON_OPTIONS="=yes"
>> > + else
>> > + GLIBC_ADDON_OPTIONS="=no"
>> > + fi
>> > # crypt is only an addon for glibc-2.1.x
>> > - test -z "${GLIBCCRYPT_FILENAME}" ||
>> GLIBC_ADDON_OPTIONS="${GLIBC_ADDON_OPTIONS}crypt,"
>> > fi
>> >
>> > # Add some default glibc config options if not given by user.
>> These used to be hardcoded.
>> > @@ -98,10 +101,14 @@ esac
>> >
>> > # One is forbidden
>> > test -z "${LD_LIBRARY_PATH}" || abort "glibc refuses to build if
>> LD_LIBRARY_PATH is set. Please unset it before running this script."
>> > +if test '!' -z "${GLIBC_ADDON_NPTL}"; then
>> > + GLIBC_EXTRA_CONFIG="--with-tls --with-__thread
>> ${GLIBC_EXTRA_CONFIG}"
>> > + GLIBC_MIN_KERNEL=2.6.4
>> > +else
>> > + GLIBC_EXTRA_CONFIG="--without-tls --without-__thread
>> ${GLIBC_EXTRA_CONFIG}"
>> > + GLIBC_MIN_KERNEL=2.4.3
>> > +fi
>> >
>> > -# And one is derived if unset.
>> > -test -z "${GLIBCTHREADS_FILENAME}" &&
>> > -GLIBCTHREADS_FILENAME=`echo $GLIBC_DIR | sed
>> 's/glibc-/glibc-linuxthreads-/'`
>> >
>> > # Check for a few prerequisites that have tripped people up.
>> > awk '/x/' < /dev/null || abort "You need awk to build a toolchain."
>> > @@ -311,7 +318,7 @@ fi
>> >
>> > cd $LINUX_HEADER_DIR
>> > mkdir -p $HEADERDIR
>> > -
>> > +INSTALL_HEADERS_DIR=`echo $HEADERDIR | sed 's/include//'`
>> > # no indentation for now because indentation levels are rising too
>> high
>> > if test -z "$LINUX_SANITIZED_HEADER_DIR" ; then
>> >
>> > @@ -325,11 +332,17 @@ fi
>> > # autodetect kernel version from contents of Makefile
>> > KERNEL_VERSION=`awk '/^VERSION =/ { print $3 }'
>> $LINUX_HEADER_DIR/Makefile`
>> > KERNEL_PATCHLEVEL=`awk '/^PATCHLEVEL =/ { print $3 }'
>> $LINUX_HEADER_DIR/Makefile`
>> > +KERNEL_SUBLEVEL=`awk '/^SUBLEVEL =/ { print $3 }'
>> $LINUX_HEADER_DIR/Makefile`
>> > +if [[ "$KERNEL_VERSION.$KERNEL_PATCHLEVEL" = "2.6" &&
>> KERNEL_SUBLEVEL -ge 18 ]]; then
>> > + make ARCH=$ARCH INSTALL_HDR_PATH=$INSTALL_HEADERS_DIR
>> headers_check
>> > + make ARCH=$ARCH INSTALL_HDR_PATH=$INSTALL_HEADERS_DIR
>> headers_install
>> > +else
>> >
>> > case "$KERNEL_VERSION.$KERNEL_PATCHLEVEL.x" in
>> > 2.2.x|2.4.x) make ARCH=$ARCH symlinks include/linux/version.h
>> > ;;
>> > -2.6.x) case $ARCH in
>> > +2.6.x)
>> > + case $ARCH in
>> > sh*) # sh does secret stuff in 'make prepare'
>> that can't be triggered separately,
>> > # but happily, it doesn't use target gcc,
>> so we can use it.
>> > # Update: this fails on 2.6.11, as it
>> installs elfconfig.h, which requires target compiler :-(
>> > @@ -351,7 +364,7 @@ case "$KERNEL_VERSION.$KERNEL_PATCHLEVEL
>> > *) abort "Unsupported kernel version
>> $KERNEL_VERSION.$KERNEL_PATCHLEVEL"
>> > esac
>> > cp -r include/asm-generic $HEADERDIR/asm-generic
>> > -
>> > +fi # [ KERNEL_SUBLEVEL -gt 17 ]
>> > fi # test -z "$LINUX_SANITIZED_HEADER_DIR"
>> >
>> > cp -r include/linux $HEADERDIR
>> > @@ -390,7 +403,42 @@ cd ..
>> >
>> > # test to see if this step passed
>> > logresult binutils ${PREFIX}/bin/${TARGET}-ld${EXEEXT}
>> > +if test '!' -z ${GLIBC_ADDON_NPTL}; then
>> > +#---------------------------------------------------------
>> > +echo "Build gcc-core w/o shared libgcc (just enough to build glibc
>> starfiles)"
>> > +
>> > +mkdir -p build-gcc-core-static; cd build-gcc-core-static
>> > +
>> > +echo Copy headers to install area of bootstrap gcc, so it can
>> build libgcc2
>> > +mkdir -p $CORE_PREFIX/$TARGET/include
>> > +cp -r $HEADERDIR/* $CORE_PREFIX/$TARGET/include
>> > +
>> > +# Use --with-local-prefix so older gccs don't look in /usr/local
>> (http://gcc.gnu.org/PR10532)
>> > +# Use funky prefix so it doesn't contaminate real prefix, in case
>> GCC_DIR != GCC_CORE_DIR
>> > +
>> > +if test '!' -f Makefile; then
>> > + ${GCC_CORE_DIR}/configure $CANADIAN_BUILD --target=$TARGET
>> --host=$GCC_HOST --prefix=$CORE_PREFIX \
>> > + --with-local-prefix=${SYSROOT} \
>> > + --disable-multilib \
>> > + --with-newlib \
>> > + ${GCC_EXTRA_CONFIG} \
>> > + ${GCC_SYSROOT_ARG_CORE} \
>> > + --disable-nls \
>> > + --enable-threads=no \
>> > + --enable-symvers=gnu \
>> > + --enable-__cxa_atexit \
>> > + --enable-languages=c \
>> > + --disable-shared
>> > +fi
>> > +
>> > +test "$CANADIAN_BUILD" = "" || make $PARALLELMFLAGS
>> all-build-libiberty || true
>> > +make $PARALLELMFLAGS all-gcc
>> > +make install-gcc
>> >
>> > +cd ..
>> > +
>> > +logresult gcc-core $CORE_PREFIX/bin/${TARGET}-gcc${EXEEXT}
>> > +fi #test '!' -z ${GLIBC_ADDON_NPTL}; then
>> > #---------------------------------------------------------
>> > echo "Install glibc headers needed to build bootstrap compiler --
>> but only if gcc-3.x"
>> >
>> > @@ -417,7 +465,10 @@ if grep -q 'gcc-[34]' ${GCC_CORE_DIR}/Ch
>> > # Override libc_cv_ppc_machine so glibc-cvs doesn't complain
>> > # 'a version of binutils that supports .machine "altivec"
>> is needed'.
>> > libc_cv_ppc_machine=yes \
>> > - CC=gcc \
>> > + libc_cv_forced_unwind=yes \
>> > + libc_cv_c_cleanup=yes \
>> > + BUILD_CC=gcc \
>> > + CC=${TARGET}-gcc${EXEEXT} \
>> > ${GLIBC_DIR}/configure --prefix=/usr \
>> > --build=$BUILD --host=$TARGET \
>> > --without-cvs --disable-sanity-checks
>> --with-headers=$HEADERDIR \
>> > @@ -463,13 +514,47 @@ if grep -q 'gcc-[34]' ${GCC_CORE_DIR}/Ch
>> > # so uncomment this if you need it
>> > #cp misc/syscall-list.h $HEADERDIR/bits/syscall.h
>> >
>> > + if test '!' -z "${GLIBC_ADDON_NPTL}"; then
>> > + # To build gcc with thread support requires real pthread
>> headers. These
>> > + # will have to manually be copied from under the tree of
>> the desired
>> > + # target pthread implementation.
>> > + cp ${GLIBC_DIR}/nptl/sysdeps/pthread/pthread.h
>> $HEADERDIR/pthread.h
>> > +
>> pthreadtypes_h=nptl/sysdeps/unix/sysv/linux/${ARCH}/bits/pthreadtypes.h
>> > +
>> > + # On s390, powerpc and sparc we also require bits/wordsize.h.
>> > + case $TARGET in
>> > + sparc* | s390* | powerpc* )
>> > + case $TARGET in
>> > + sparc64* )
>> wordsize_h=sysdeps/sparc/sparc64/bits/wordsize.h
>> > +
>> pthreadtypes_h=nptl/sysdeps/unix/sysv/linux/sparc/bits/pthreadtypes.h
>> > + ;;
>> > + sparc* )
>> wordsize_h=sysdeps/sparc/sparc32/bits/wordsize.h
>> > +
>> pthreadtypes_h=nptl/sysdeps/unix/sysv/linux/sparc/bits/pthreadtypes.h
>> > + ;;
>> > + s390x* )
>> wordsize_h=sysdeps/s390/s390x/bits/wordsize.h
>> > + ;;
>> > + s390* ) wordsize_h=sysdeps/s390/s390/bits/wordsize.h
>> > + ;;
>> > + powerpc64* )
>> wordsize_h=sysdeps/powerpc/powerpc64/bits/wordsize.h
>> > +
>> pthreadtypes_h=nptl/sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h
>> > + ;;
>> > + powerpc* )
>> wordsize_h=sysdeps/powerpc/powerpc32/bits/wordsize.h
>> > +
>> pthreadtypes_h=nptl/sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h
>> > + ;;
>> > + esac
>> > + test ! -f $HEADERDIR/bits/wordsize.h && cp
>> ${GLIBC_DIR}/${wordsize_h} $HEADERDIR/bits/wordsize.h
>> > + cp ${GLIBC_DIR}/${pthreadtypes_h}
>> $HEADERDIR/bits/pthreadtypes.h
>> > + ;;
>> > + esac
>> > + fi # GLIBC_ADDONS_NPTL
>> > +
>> > cd ..
>> > fi
>> > -
>> > +if test '!' -z ${GLIBC_ADDON_LINUXTHREADS}; then
>> > #---------------------------------------------------------
>> > -echo "Build gcc-core (just enough to build glibc)"
>> > +echo "Build gcc-core w/o shared libgcc (just enough to build glibc
>> starfiles)"
>> >
>> > -mkdir -p build-gcc-core; cd build-gcc-core
>> > +mkdir -p build-gcc-core-static; cd build-gcc-core-static
>> >
>> > echo Copy headers to install area of bootstrap gcc, so it can
>> build libgcc2
>> > mkdir -p $CORE_PREFIX/$TARGET/include
>> > @@ -494,15 +579,132 @@ if test '!' -f Makefile; then
>> > fi
>> >
>> > test "$CANADIAN_BUILD" = "" || make $PARALLELMFLAGS
>> all-build-libiberty || true
>> > -make $PARALLELMFLAGS all-gcc
>> > +make $PARALLELMFLAGS all-gcc
>> > make install-gcc
>> >
>> > cd ..
>> >
>> > logresult gcc-core $CORE_PREFIX/bin/${TARGET}-gcc${EXEEXT}
>> > +fi #test '!' -z ${GLIBC_ADDON_LINUXTHREADS}; then
>> > +
>> > +# Following extra steps required for building an NPTL enabled glibc.
>> > +if test '!' -z "${GLIBC_ADDON_NPTL}"; then
>> > + #---------------------------------------------------------
>> > + echo "Build glibc startfiles (required for shared libgcc)"
>> > +
>> > + mkdir -p build-glibc-startfiles; cd build-glibc-startfiles
>> > +
>> > + # sh4 really needs to set configparms as of gcc-3.4/glibc-2.3.2
>> > + # note: this is awkward, doesn't work well if you need more
>> than one line in configparms
>> > + echo ${GLIBC_CONFIGPARMS} > configparms
>> > +
>> > + echo "libc_cv_forced_unwind=yes" > config.cache
>> > + echo "libc_cv_c_cleanup=yes" >> config.cache
>> > + # this here is moot, currently you cannot build nptl for sparc64
>> > + case ${TARGET} in
>> > + sparc64* ) echo "libc_cv_sparc64_tls=yes" >> config.cache ;;
>> > + esac
>> > +
>> > + if test '!' -f Makefile; then
>> > + # Configure with --prefix the way we want it on the target...
>> > + # There are a whole lot of settings here. You'll probably
>> want
>> > + # to read up on what they all mean, and customize a bit.
>> > + # e.g. I picked --enable-kernel=2.4.3 here just because
>> it's the kernel Bill
>> > + # used in his example gcc2.95.3 script. That means some
>> backwards compatibility
>> > + # stuff is turned on in glibc that you may not need if
>> you're using a newer kernel.
>> > + # Compare these options with the ones used when installing
>> the glibc headers above - they're different.
>> > + # Adding "--without-gd" option to avoid error
>> "memusagestat.c:36:16: gd.h: No such file or directory"
>> > + # See also
>> http://sources.redhat.com/ml/libc-alpha/2000-07/msg00024.html.
>> > + # Set BUILD_CC, or you won't be able to build datafiles
>> > + # Set --build, else glibc-2.3.2 will think you're not
>> cross-compiling, and try to run the test programs
>> > +
>> > + BUILD_CC=gcc CFLAGS="$TARGET_CFLAGS" CC="${TARGET}-gcc
>> $GLIBC_EXTRA_CC_ARGS" \
>> > + AR=${TARGET}-ar RANLIB=${TARGET}-ranlib \
>> > + ${GLIBC_DIR}/configure --prefix=/usr \
>> > + --build=$BUILD --host=$TARGET \
>> > + ${GLIBC_EXTRA_CONFIG} \
>> > + --enable-kernel=${GLIBC_MIN_KERNEL} \
>> > + --without-cvs --disable-profile --disable-debug
>> --without-gd \
>> > + $SHARED_MODE \
>> > + --enable-add-ons${GLIBC_ADDON_OPTIONS}
>> --with-headers=$HEADERDIR \
>> > + --cache-file=config.cache
>> > + fi
>> > +
>> > + #TODO: should check whether slibdir has been set in
>> configparms to */lib64
>> > + # and copy the startfiles into the appropriate libdir.
>> > + make csu/subdir_lib
>> > +
>> > + test -z "${USE_SYSROOT}" &&
>> > + cp -fp csu/crt[1in].o ${SYSROOT}/lib/ ||
>> > + cp -fp csu/crt[1in].o ${SYSROOT}/usr/lib/
>> > +
>> > + cd ..
>> >
>> > + #---------------------------------------------------------
>> > + echo "Build gcc-core w shared libgcc"
>> > +
>> > + mkdir -p build-gcc-core-shared; cd build-gcc-core-shared
>> > +
>> > + # Use --with-local-prefix so older gccs don't look in
>> /usr/local (http://gcc.gnu.org/PR10532)
>> > +
>> > + if test '!' -f Makefile; then
>> > + ${GCC_DIR}/configure $CANADIAN_BUILD --target=$TARGET
>> --host=$GCC_HOST --prefix=$PREFIX \
>> > + --with-local-prefix=${SYSROOT} \
>> > + --disable-multilib \
>> > + ${GCC_EXTRA_CONFIG} \
>> > + ${GCC_SYSROOT_ARG_CORE} \
>> > + --disable-nls \
>> > + --enable-symvers=gnu \
>> > + --enable-__cxa_atexit \
>> > + --enable-languages=c \
>> > + --enable-shared
>> > + fi
>> > +
>> > + # HACK: we need to override SHLIB_LC from
>> gcc/config/t-slibgcc-elf-ver or
>> > + # gcc/config/t-libunwind so -lc is removed from the link
>> for
>> > + # libgcc_s.so, as we do not have a target -lc yet.
>> > + # This is not as ugly as it appears to be ;-) All
>> symbols get resolved
>> > + # during the glibc build, and we provide a proper
>> libgcc_s.so for the
>> > + # cross toolchain during the final gcc build.
>> > + #
>> > + # As we cannot modify the source tree, nor override
>> SHLIB_LC itself
>> > + # during configure or make, we have to edit the resultant
>> > + # gcc/libgcc.mk itself to remove -lc from the link.
>> > + # This causes us to have to jump through some hoops...
>> > + #
>> > + # To produce libgcc.mk to edit we firstly require
>> libiberty.a,
>> > + # so we configure then build it.
>> > + # Next we have to configure gcc, create libgcc.mk then
>> edit it...
>> > + # So much easier if we just edit the source tree, but
>> hey...
>> > + if test '!' -f ${GCC_DIR}/gcc/BASE-VER; then
>> > + make configure-libiberty
>> > + make -C libiberty libiberty.a
>> > + make configure-gcc
>> > + make configure-libcpp
>> > + make all-libcpp
>> > + else
>> > + make configure-gcc
>> > + make configure-libcpp
>> > + make configure-build-libiberty
>> > + make all-libcpp
>> > + make all-build-libiberty
>> > + fi
>> > + make -C gcc libgcc.mk
>> > +
>> > + if test '!' -f gcc/libgcc.mk-ORIG ; then cp -p gcc/libgcc.mk
>> gcc/libgcc.mk-ORIG; fi
>> > + sed 's@-lc@@g' < gcc/libgcc.mk-ORIG > gcc/libgcc.mk
>> > +
>> > + test "$CANADIAN_BUILD" = "" || make $PARALLELMFLAGS
>> all-build-libiberty || true
>> > + make $PARALLELMFLAGS all-gcc
>> > + make install-gcc
>> > +
>> > + cd ..
>> > +
>> > + test -x ${PREFIX}/bin/${TARGET}-gcc || abort Build failed
>> during gcc-core
>> > +
>> > +fi # GLIBC_ADDON_NPTL
>> > #---------------------------------------------------------
>> > -echo Build glibc and linuxthreads
>> > +echo Build glibc
>> >
>> > mkdir -p build-glibc; cd build-glibc
>> >
>> > @@ -510,6 +712,16 @@ mkdir -p build-glibc; cd build-glibc
>> > # note: this is awkward, doesn't work well if you need more than
>> one line in configparms
>> > echo ${GLIBC_CONFIGPARMS} > configparms
>> >
>> > +if test '!' -z "${GLIBC_ADDON_NPTL}"; then
>> > + # Following configure tests fail while cross-compiling
>> > + echo "libc_cv_forced_unwind=yes" > config.cache
>> > + echo "libc_cv_c_cleanup=yes" >> config.cache
>> > + # The following is moot, currently you cannot build nptl for
>> sparc64
>> > + case ${TARGET} in
>> > + sparc64* ) echo "libc_cv_sparc64_tls=yes" >> config.cache ;;
>> > + esac
>> > +fi # GLIBC_ADDON_NPTL
>> > +
>> > if test '!' -f Makefile; then
>> > # Configure with --prefix the way we want it on the target...
>> > # There are a whole lot of settings here. You'll probably want
>> > @@ -534,9 +746,11 @@ if test '!' -f Makefile; then
>> > ${GLIBC_DIR}/configure --prefix=/usr \
>> > --build=$BUILD --host=$TARGET \
>> > ${GLIBC_EXTRA_CONFIG} ${DEFAULT_GLIBC_EXTRA_CONFIG} \
>> > + --enable-kernel=${GLIBC_MIN_KERNEL} \
>> > --without-cvs --disable-profile --disable-debug
>> --without-gd \
>> > $SHARED_MODE \
>> > - --enable-add-ons${GLIBC_ADDON_OPTIONS}
>> --with-headers=$HEADERDIR
>> > + --enable-add-ons${GLIBC_ADDON_OPTIONS}
>> --with-headers=$HEADERDIR \
>> > + --cache-file=config.cache
>> > fi
>> >
>> > if grep -l '^install-lib-all:' ${GLIBC_DIR}/Makerules > /dev/null;
>> then
>> > diff -Naurp crosstool-0.43.orig/demo-arm-softfloat-eabi.sh
>> crosstool-0.43/demo-arm-softfloat-eabi.sh
>> > --- crosstool-0.43.orig/demo-arm-softfloat-eabi.sh 1969-12-31
>> 16:00:00.000000000 -0800
>> > +++ crosstool-0.43/demo-arm-softfloat-eabi.sh 2006-12-09
>> 17:14:06.000000000 -0800
>> > @@ -0,0 +1,33 @@
>> > +#!/bin/sh
>> > +# This script has one line for each known working toolchain
>> > +# for this architecture. Uncomment the one you want.
>> > +# Generated by generate-demo.pl from buildlogs/all.dats.txt
>> > +
>> > +set -ex
>> > +TARBALLS_DIR=$HOME/downloads
>> > +RESULT_TOP=/opt/crosstool
>> > +export TARBALLS_DIR RESULT_TOP
>> > +GCC_LANGUAGES="c,c++"
>> > +export GCC_LANGUAGES
>> > +GLIBC_ADDON_NPTL=1
>> > +export GLIBC_ADDON_NPTL=1
>> > +
>> > +# Really, you should do the mkdir before running this,
>> > +# and chown /opt/crosstool to yourself so you don't need to run as
>> root.
>> > +mkdir -p $RESULT_TOP
>> > +
>> > +#eval `cat arm-softfloat.dat gcc-2.95.3-glibc-2.1.3.dat` sh all.sh
>> --notest
>> > +#eval `cat arm-softfloat.dat gcc-2.95.3-glibc-2.2.2.dat` sh all.sh
>> --notest
>> > +#eval `cat arm-softfloat.dat gcc-2.95.3-glibc-2.2.5.dat` sh all.sh
>> --notest
>> > +#eval `cat arm-softfloat.dat gcc-3.2.3-glibc-2.2.5.dat` sh all.sh
>> --notest
>> > +#eval `cat arm-softfloat.dat gcc-3.2.3-glibc-2.3.2.dat` sh all.sh
>> --notest
>> > +#eval `cat arm-softfloat.dat gcc-3.2.3-glibc-2.3.2-tls.dat` sh
>> all.sh --notest
>> > +#eval `cat arm-softfloat.dat gcc-3.3.6-glibc-2.2.2.dat` sh all.sh
>> --notest
>> > +#eval `cat arm-softfloat.dat gcc-3.3.6-glibc-2.2.5.dat` sh all.sh
>> --notest
>> > +#eval `cat arm-softfloat.dat gcc-3.3.6-glibc-2.3.2.dat` sh all.sh
>> --notest
>> > +#eval `cat arm-softfloat.dat gcc-3.3.6-glibc-2.3.2-tls.dat` sh
>> all.sh --notest
>> > +#eval `cat arm-softfloat.dat gcc-3.4.5-glibc-2.2.5.dat` sh all.sh
>> --notest
>> > +#eval `cat arm-softfloat.dat gcc-3.4.5-glibc-2.3.5.dat` sh all.sh
>> --notest
>> > +eval `cat arm-softfloat-eabi.dat gcc-4.1.1-glibc-2.5.dat` sh
>> all.sh -notest -nounpack
>> > +
>> > +echo Done.
>> > diff -Naurp crosstool-0.43.orig/gcc-4.1.1-glibc-2.5.dat
>> crosstool-0.43/gcc-4.1.1-glibc-2.5.dat
>> > --- crosstool-0.43.orig/gcc-4.1.1-glibc-2.5.dat 1969-12-31
>> 16:00:00.000000000 -0800
>> > +++ crosstool-0.43/gcc-4.1.1-glibc-2.5.dat 2006-12-09
>> 17:08:30.000000000 -0800
>> > @@ -0,0 +1,10 @@
>> > +BINUTILS_DIR=binutils-2.17
>> > +GCC_CORE_DIR=gcc-4.1.1
>> > +GCC_DIR=gcc-4.1.1
>> > +GLIBC_DIR=glibc-2.5
>> > +LINUX_DIR=linux-2.6.18.5
>> > +GLIBCTHREADS_FILENAME=
>> > +GLIBCPORTS_FILENAME=glibc-ports-2.5
>> > +GLIBCLIBIDN_FILENAME=glibc-libidn-2.5
>> > +GDB_DIR=gdb-6.5
>> > +GLIBC_EXTRA_CONFIG="$GLIBC_EXTRA_CONFIG --with-tls
>> --with-__thread --enable-kernel=2.6.0"
>> > diff -Naurp crosstool-0.43.orig/getandpatch.sh
>> crosstool-0.43/getandpatch.sh
>> > --- crosstool-0.43.orig/getandpatch.sh 2006-12-06
>> 16:17:40.000000000 -0800
>> > +++ crosstool-0.43/getandpatch.sh 2006-12-09
>> 15:53:28.000000000 -0800
>> > @@ -153,7 +153,19 @@ getUnpackAndPatch() {
>> > if [ -d kernel ]; then
>> > mv kernel $BASENAME
>> > fi
>> > + # rename glibc-ports-${version} to ports
>> > + # because there will be patches for ports and they have to be
>> edited
>> > + # everytime for different version just because ports will have
>> glibc
>> > + # version in its name. Renaming to ports will let the patch
>> applied to
>> > + # glibc-ports-2.5 to glibc-ports-2.6 in future.
>> >
>> > + if [ -n "`echo $ARCHIVE_NAME | grep glibc-ports-`" ]; then
>> > + mv glibc-ports-2* ports
>> > + fi
>> > + if [ -n "`echo $ARCHIVE_NAME | grep glibc-libidn-`" ]; then
>> > + mv glibc-libidn-2* libidn
>> > + fi
>> > +
>> > # Apply any patches for this component
>> > # -f is required for patches that delete files, like
>> > # patches/glibc-2.2.5/hhl-powerpc-fpu.patch,
>> > @@ -163,7 +175,7 @@ getUnpackAndPatch() {
>> > # Use -g0 else patch-2.5.8 on MacOSX tries to run perforce!
>> > if test -d $TOP_DIR/patches/$BASENAME; then
>> > case $ARCHIVE_NAME in
>> > - glibc-[a-z]*-2*) ;; # glibc addon, so we're
>> already in right directory
>> > + glibc-[a-z]*-2*) ;; # glibc addon, so we're already in
>> right directory
>> > *) cd $BASENAME ;;
>> > esac
>> >
>> > @@ -270,12 +282,13 @@ if test "${CYGWIN_DIR}" = ""; then
>> >
>> http://ep09.pld-linux.org/~mmazur/linux-libc-headers/${LINUX_SANITIZED_HEADER_DIR}.tar.bz2
>> \
>> >
>> ftp://ftp.lfs-matrix.net/pub/linux-libc-headers/${LINUX_SANITIZED_HEADER_DIR}.tar.bz2
>>
>> > # Glibc addons must come after glibc
>> > - getUnpackAndPatch \
>> > +test -n "${GLIBCTHREADS_FILENAME}" && getUnpackAndPatch \
>> >
>> ftp://ftp.gnu.org/pub/gnu/glibc/$GLIBCTHREADS_FILENAME.tar.bz2 \
>> >
>> ftp://ftp.gnu.org/pub/gnu/glibc/$GLIBCTHREADS_FILENAME.tar.gz \
>> >
>> ftp://gcc.gnu.org/pub/glibc/releases/$GLIBCTHREADS_FILENAME.tar.bz2 \
>> > -
>> ftp://gcc.gnu.org/pub/glibc/releases/$GLIBCTHREADS_FILENAME.tar.gz
>> > -
>> > +
>> ftp://gcc.gnu.org/pub/glibc/releases/$GLIBCTHREADS_FILENAME.tar.gz
>> > + test x$GLIBCPORTS_FILENAME = x || getUnpackAndPatch
>> ftp://ftp.gnu.org/pub/gnu/glibc/$GLIBCPORTS_FILENAME.tar.gz
>> ftp://ftp.gnu.org/pub/gnu/glibc/$GLIBCPORTS_FILENAME.tar.bz2
>> > + test x$GLIBCLIBIDN_FILENAME = x || getUnpackAndPatch
>> ftp://ftp.gnu.org/pub/gnu/glibc/$GLIBCLIBIDN_FILENAME.tar.gz
>> ftp://ftp.gnu.org/pub/gnu/glibc/$GLIBCLIBIDN_FILENAME.tar.bz2
>> > test x$GLIBCCRYPT_FILENAME = x || getUnpackAndPatch
>> ftp://ftp.gnu.org/pub/gnu/glibc/$GLIBCCRYPT_FILENAME.tar.gz
>> ftp://ftp.gnu.org/pub/gnu/glibc/$GLIBCCRYPT_FILENAME.tar.bz2
>> > fi
>> >
>> > diff -Naurp crosstool-0.43.orig/patches/gcc-4.0.1/libiberty.patch
>> crosstool-0.43/patches/gcc-4.0.1/libiberty.patch
>> > --- crosstool-0.43.orig/patches/gcc-4.0.1/libiberty.patch
>> 1969-12-31 16:00:00.000000000 -0800
>> > +++ crosstool-0.43/patches/gcc-4.0.1/libiberty.patch 2006-12-08
>> 01:48:52.000000000 -0800
>> > @@ -0,0 +1,11 @@
>> > +--- gcc-4.0.1.orig/gcc/Makefile.in 2005-04-04
>> 21:45:13.000000000 +0200
>> > ++++ gcc-4.0.1/gcc/Makefile.in 2005-08-05 22:12:56.544994408 +0200
>> > +@@ -757,7 +757,7 @@
>> > +
>> > + # Build and host support libraries.
>> > + LIBIBERTY = ../libiberty/libiberty.a
>> > +-BUILD_LIBIBERTY = ../$(build_subdir)/libiberty/libiberty.a
>> > ++BUILD_LIBIBERTY = ../libiberty/libiberty.a
>> > +
>> > + # Dependencies on the intl and portability libraries.
>> > + LIBDEPS= $(CPPLIB) $(LIBIBERTY) $(LIBINTL_DEP) $(LIBICONV_DEP)
>> > diff -Naurp
>> crosstool-0.43.orig/patches/gcc-4.1.1/gcc-arm-softfp.patch
>> crosstool-0.43/patches/gcc-4.1.1/gcc-arm-softfp.patch
>> > --- crosstool-0.43.orig/patches/gcc-4.1.1/gcc-arm-softfp.patch
>> 1969-12-31 16:00:00.000000000 -0800
>> > +++ crosstool-0.43/patches/gcc-4.1.1/gcc-arm-softfp.patch
>> 2006-12-09 12:54:28.000000000 -0800
>> > @@ -0,0 +1,25 @@
>> > +Description:
>> > + Enable the soft-fp routines for ARM GNU/Linux, so that they can be
>> > + used for --with-float=soft.
>> > +
>> > +Patch rejected by community, so local to Montavista.
>> > +http://gcc.gnu.org/ml/gcc-patches/2004-04/msg01570.html
>> > +
>> > +Index: gcc-4.1.0/gcc/config/arm/t-linux
>> > +===================================================================
>> > +--- gcc-4.1.0.orig/gcc/config/arm/t-linux
>> > ++++ gcc-4.1.0/gcc/config/arm/t-linux
>> > +@@ -4,7 +4,12 @@ TARGET_LIBGCC2_CFLAGS = -fomit-frame-poi
>> > + LIBGCC2_DEBUG_CFLAGS = -g0
>> > +
>> > + LIB1ASMSRC = arm/lib1funcs.asm
>> > +-LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx
>> > ++LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx \
>> > ++ _call_via_rX _interwork_call_via_rX \
>> > ++ _lshrdi3 _ashrdi3 _ashldi3 \
>> > ++ _negdf2 _addsubdf3 _muldivdf3 _cmpdf2 _unorddf2 _fixdfsi
>> _fixunsdfsi \
>> > ++ _truncdfsf2 _negsf2 _addsubsf3 _muldivsf3 _cmpsf2 _unordsf2 \
>> > ++ _fixsfsi _fixunssfsi _floatdidf _floatdisf
>> > +
>> > + # MULTILIB_OPTIONS = mhard-float/msoft-float
>> > + # MULTILIB_DIRNAMES = hard-float soft-float
>> > diff -Naurp
>> crosstool-0.43.orig/patches/glibc-ports-2.5/glibc-arm-no-procinfo_h.patch
>> crosstool-0.43/patches/glibc-ports-2.5/glibc-arm-no-procinfo_h.patch
>> > ---
>> crosstool-0.43.orig/patches/glibc-ports-2.5/glibc-arm-no-procinfo_h.patch
>> 1969-12-31 16:00:00.000000000 -0800
>> > +++
>> crosstool-0.43/patches/glibc-ports-2.5/glibc-arm-no-procinfo_h.patch
>> 2006-12-09 12:30:45.000000000 -0800
>> > @@ -0,0 +1,325 @@
>> > +http://sources.redhat.com/ml/libc-ports/2006-10/msg00040.html
>> > +Avoid using asm/procinfo.h
>> > +
>> > + * From: "Joseph S. Myers" <joseph at codesourcery dot com>
>> > + * To: libc-ports at sourceware dot org
>> > + * Date: Tue, 24 Oct 2006 19:25:12 +0000 (UTC)
>> > + * Subject: Avoid using asm/procinfo.h
>> > +
>> > +I previously noted
>> > +<http://sourceware.org/ml/libc-ports/2006-08/msg00023.html> that the
>> > +use of <asm/procinfo.h>, a Linux-specific kernel header, in
>> > +sysdeps/arm/eabi, is an abstraction violation, and that in principle
>> > +all the files in sysdeps/arm/eabi should use sysdep.h not
>> > +asm/procinfo.h for HWCAP_VFP.
>> > +
>> > +The ARM kernel maintainers have now declared that <asm/procinfo.h>
>> > +should not be used outside the kernel at all (and in particular that
>> > +headers_install is correct in not exporting it), and that these
>> > +definitions will move to a different kernel header. This gives a
>> > +concrete reason for making the change to use glibc's internal
>> > +definitions, which this patch does, thereby allowing glibc to build
>> > +with the exported headers.
>> > +
>> > +2006-10-24 Joseph S. Myers <joseph@codesourcery.com>
>> > +
>> > + * sysdeps/arm/eabi/fclrexcpt.c: Include <sysdep.h> instead of
>> > + <asm/procinfo.h>. Use HWCAP_ARM_VFP instead of HWCAP_VFP.
>> > + * sysdeps/arm/eabi/fedisblxcpt.c: Likewise.
>> > + * sysdeps/arm/eabi/feenablxcpt.c: Likewise.
>> > + * sysdeps/arm/eabi/fegetenv.c: Likewise.
>> > + * sysdeps/arm/eabi/fegetexcept.c: Likewise.
>> > + * sysdeps/arm/eabi/fegetround.c: Likewise.
>> > + * sysdeps/arm/eabi/feholdexcpt.c: Likewise.
>> > + * sysdeps/arm/eabi/fesetenv.c: Likewise.
>> > + * sysdeps/arm/eabi/fesetround.c: Likewise.
>> > + * sysdeps/arm/eabi/fraiseexcpt.c: Likewise.
>> > + * sysdeps/arm/eabi/fsetexcptflg.c: Likewise.
>> > + * sysdeps/arm/eabi/ftestexcept.c: Likewise.
>> > + * sysdeps/arm/eabi/setfpucw.c: Likewise.
>> > +
>> > +Index: libc/ports/sysdeps/arm/eabi/fclrexcpt.c
>> > +===================================================================
>> > +RCS file: /cvs/glibc/ports/sysdeps/arm/eabi/fclrexcpt.c,v
>> > +retrieving revision 1.1
>> > +diff -u -r1.1 fclrexcpt.c
>> > +--- libc/ports/sysdeps/arm/eabi/fclrexcpt.c 10 Oct 2005
>> 15:29:32 -0000 1.1
>> > ++++ libc/ports/sysdeps/arm/eabi/fclrexcpt.c 24 Oct 2006
>> 19:17:51 -0000
>> > +@@ -23,12 +23,12 @@
>> > + #include <unistd.h>
>> > + #include <ldsodefs.h>
>> > + #include <dl-procinfo.h>
>> > +-#include <asm/procinfo.h>
>> > ++#include <sysdep.h>
>> > +
>> > + int
>> > + __feclearexcept (int excepts)
>> > + {
>> > +- if (GLRO (dl_hwcap) & HWCAP_VFP)
>> > ++ if (GLRO (dl_hwcap) & HWCAP_ARM_VFP)
>> > + {
>> > + unsigned long int temp;
>> > +
>> > +Index: libc/ports/sysdeps/arm/eabi/fedisblxcpt.c
>> > +===================================================================
>> > +RCS file: /cvs/glibc/ports/sysdeps/arm/eabi/fedisblxcpt.c,v
>> > +retrieving revision 1.1
>> > +diff -u -r1.1 fedisblxcpt.c
>> > +--- libc/ports/sysdeps/arm/eabi/fedisblxcpt.c 10 Oct 2005
>> 15:29:32 -0000 1.1
>> > ++++ libc/ports/sysdeps/arm/eabi/fedisblxcpt.c 24 Oct 2006
>> 19:17:51 -0000
>> > +@@ -24,12 +24,12 @@
>> > + #include <unistd.h>
>> > + #include <ldsodefs.h>
>> > + #include <dl-procinfo.h>
>> > +-#include <asm/procinfo.h>
>> > ++#include <sysdep.h>
>> > +
>> > + int
>> > + fedisableexcept (int excepts)
>> > + {
>> > +- if (GLRO (dl_hwcap) & HWCAP_VFP)
>> > ++ if (GLRO (dl_hwcap) & HWCAP_ARM_VFP)
>> > + {
>> > + unsigned long int new_exc, old_exc;
>> > +
>> > +Index: libc/ports/sysdeps/arm/eabi/feenablxcpt.c
>> > +===================================================================
>> > +RCS file: /cvs/glibc/ports/sysdeps/arm/eabi/feenablxcpt.c,v
>> > +retrieving revision 1.1
>> > +diff -u -r1.1 feenablxcpt.c
>> > +--- libc/ports/sysdeps/arm/eabi/feenablxcpt.c 10 Oct 2005
>> 15:29:32 -0000 1.1
>> > ++++ libc/ports/sysdeps/arm/eabi/feenablxcpt.c 24 Oct 2006
>> 19:17:51 -0000
>> > +@@ -24,12 +24,12 @@
>> > + #include <unistd.h>
>> > + #include <ldsodefs.h>
>> > + #include <dl-procinfo.h>
>> > +-#include <asm/procinfo.h>
>> > ++#include <sysdep.h>
>> > +
>> > + int
>> > + feenableexcept (int excepts)
>> > + {
>> > +- if (GLRO (dl_hwcap) & HWCAP_VFP)
>> > ++ if (GLRO (dl_hwcap) & HWCAP_ARM_VFP)
>> > + {
>> > + unsigned long int new_exc, old_exc;
>> > +
>> > +Index: libc/ports/sysdeps/arm/eabi/fegetenv.c
>> > +===================================================================
>> > +RCS file: /cvs/glibc/ports/sysdeps/arm/eabi/fegetenv.c,v
>> > +retrieving revision 1.1
>> > +diff -u -r1.1 fegetenv.c
>> > +--- libc/ports/sysdeps/arm/eabi/fegetenv.c 10 Oct 2005
>> 15:29:32 -0000 1.1
>> > ++++ libc/ports/sysdeps/arm/eabi/fegetenv.c 24 Oct 2006
>> 19:17:51 -0000
>> > +@@ -23,12 +23,12 @@
>> > + #include <unistd.h>
>> > + #include <ldsodefs.h>
>> > + #include <dl-procinfo.h>
>> > +-#include <asm/procinfo.h>
>> > ++#include <sysdep.h>
>> > +
>> > + int
>> > + __fegetenv (fenv_t *envp)
>> > + {
>> > +- if (GLRO (dl_hwcap) & HWCAP_VFP)
>> > ++ if (GLRO (dl_hwcap) & HWCAP_ARM_VFP)
>> > + {
>> > + unsigned long int temp;
>> > + _FPU_GETCW (temp);
>> > +Index: libc/ports/sysdeps/arm/eabi/fegetexcept.c
>> > +===================================================================
>> > +RCS file: /cvs/glibc/ports/sysdeps/arm/eabi/fegetexcept.c,v
>> > +retrieving revision 1.1
>> > +diff -u -r1.1 fegetexcept.c
>> > +--- libc/ports/sysdeps/arm/eabi/fegetexcept.c 10 Oct 2005
>> 15:29:32 -0000 1.1
>> > ++++ libc/ports/sysdeps/arm/eabi/fegetexcept.c 24 Oct 2006
>> 19:17:51 -0000
>> > +@@ -24,12 +24,12 @@
>> > + #include <unistd.h>
>> > + #include <ldsodefs.h>
>> > + #include <dl-procinfo.h>
>> > +-#include <asm/procinfo.h>
>> > ++#include <sysdep.h>
>> > +
>> > + int
>> > + fegetexcept (void)
>> > + {
>> > +- if (GLRO (dl_hwcap) & HWCAP_VFP)
>> > ++ if (GLRO (dl_hwcap) & HWCAP_ARM_VFP)
>> > + {
>> > + unsigned long temp;
>> > +
>> > +Index: libc/ports/sysdeps/arm/eabi/fegetround.c
>> > +===================================================================
>> > +RCS file: /cvs/glibc/ports/sysdeps/arm/eabi/fegetround.c,v
>> > +retrieving revision 1.1
>> > +diff -u -r1.1 fegetround.c
>> > +--- libc/ports/sysdeps/arm/eabi/fegetround.c 10 Oct 2005
>> 15:29:32 -0000 1.1
>> > ++++ libc/ports/sysdeps/arm/eabi/fegetround.c 24 Oct 2006
>> 19:17:51 -0000
>> > +@@ -23,12 +23,12 @@
>> > + #include <unistd.h>
>> > + #include <ldsodefs.h>
>> > + #include <dl-procinfo.h>
>> > +-#include <asm/procinfo.h>
>> > ++#include <sysdep.h>
>> > +
>> > + int
>> > + fegetround (void)
>> > + {
>> > +- if (GLRO (dl_hwcap) & HWCAP_VFP)
>> > ++ if (GLRO (dl_hwcap) & HWCAP_ARM_VFP)
>> > + {
>> > + unsigned int temp;
>> > +
>> > +Index: libc/ports/sysdeps/arm/eabi/feholdexcpt.c
>> > +===================================================================
>> > +RCS file: /cvs/glibc/ports/sysdeps/arm/eabi/feholdexcpt.c,v
>> > +retrieving revision 1.1
>> > +diff -u -r1.1 feholdexcpt.c
>> > +--- libc/ports/sysdeps/arm/eabi/feholdexcpt.c 10 Oct 2005
>> 15:29:32 -0000 1.1
>> > ++++ libc/ports/sysdeps/arm/eabi/feholdexcpt.c 24 Oct 2006
>> 19:17:51 -0000
>> > +@@ -23,12 +23,12 @@
>> > + #include <unistd.h>
>> > + #include <ldsodefs.h>
>> > + #include <dl-procinfo.h>
>> > +-#include <asm/procinfo.h>
>> > ++#include <sysdep.h>
>> > +
>> > + int
>> > + feholdexcept (fenv_t *envp)
>> > + {
>> > +- if (GLRO (dl_hwcap) & HWCAP_VFP)
>> > ++ if (GLRO (dl_hwcap) & HWCAP_ARM_VFP)
>> > + {
>> > + unsigned long int temp;
>> > +
>> > +Index: libc/ports/sysdeps/arm/eabi/fesetenv.c
>> > +===================================================================
>> > +RCS file: /cvs/glibc/ports/sysdeps/arm/eabi/fesetenv.c,v
>> > +retrieving revision 1.1
>> > +diff -u -r1.1 fesetenv.c
>> > +--- libc/ports/sysdeps/arm/eabi/fesetenv.c 10 Oct 2005
>> 15:29:32 -0000 1.1
>> > ++++ libc/ports/sysdeps/arm/eabi/fesetenv.c 24 Oct 2006
>> 19:17:51 -0000
>> > +@@ -23,12 +23,12 @@
>> > + #include <unistd.h>
>> > + #include <ldsodefs.h>
>> > + #include <dl-procinfo.h>
>> > +-#include <asm/procinfo.h>
>> > ++#include <sysdep.h>
>> > +
>> > + int
>> > + __fesetenv (const fenv_t *envp)
>> > + {
>> > +- if (GLRO (dl_hwcap) & HWCAP_VFP)
>> > ++ if (GLRO (dl_hwcap) & HWCAP_ARM_VFP)
>> > + {
>> > + unsigned int temp;
>> > +
>> > +Index: libc/ports/sysdeps/arm/eabi/fesetround.c
>> > +===================================================================
>> > +RCS file: /cvs/glibc/ports/sysdeps/arm/eabi/fesetround.c,v
>> > +retrieving revision 1.1
>> > +diff -u -r1.1 fesetround.c
>> > +--- libc/ports/sysdeps/arm/eabi/fesetround.c 10 Oct 2005
>> 15:29:32 -0000 1.1
>> > ++++ libc/ports/sysdeps/arm/eabi/fesetround.c 24 Oct 2006
>> 19:17:51 -0000
>> > +@@ -23,12 +23,12 @@
>> > + #include <unistd.h>
>> > + #include <ldsodefs.h>
>> > + #include <dl-procinfo.h>
>> > +-#include <asm/procinfo.h>
>> > ++#include <sysdep.h>
>> > +
>> > + int
>> > + fesetround (int round)
>> > + {
>> > +- if (GLRO (dl_hwcap) & HWCAP_VFP)
>> > ++ if (GLRO (dl_hwcap) & HWCAP_ARM_VFP)
>> > + {
>> > + fpu_control_t temp;
>> > +
>> > +Index: libc/ports/sysdeps/arm/eabi/fraiseexcpt.c
>> > +===================================================================
>> > +RCS file: /cvs/glibc/ports/sysdeps/arm/eabi/fraiseexcpt.c,v
>> > +retrieving revision 1.1
>> > +diff -u -r1.1 fraiseexcpt.c
>> > +--- libc/ports/sysdeps/arm/eabi/fraiseexcpt.c 10 Oct 2005
>> 15:29:32 -0000 1.1
>> > ++++ libc/ports/sysdeps/arm/eabi/fraiseexcpt.c 24 Oct 2006
>> 19:17:51 -0000
>> > +@@ -24,12 +24,12 @@
>> > + #include <unistd.h>
>> > + #include <ldsodefs.h>
>> > + #include <dl-procinfo.h>
>> > +-#include <asm/procinfo.h>
>> > ++#include <sysdep.h>
>> > +
>> > + int
>> > + feraiseexcept (int excepts)
>> > + {
>> > +- if (GLRO (dl_hwcap) & HWCAP_VFP)
>> > ++ if (GLRO (dl_hwcap) & HWCAP_ARM_VFP)
>> > + {
>> > + int fpscr;
>> > + const float fp_zero = 0.0, fp_one = 1.0, fp_max = FLT_MAX,
>> > +Index: libc/ports/sysdeps/arm/eabi/fsetexcptflg.c
>> > +===================================================================
>> > +RCS file: /cvs/glibc/ports/sysdeps/arm/eabi/fsetexcptflg.c,v
>> > +retrieving revision 1.1
>> > +diff -u -r1.1 fsetexcptflg.c
>> > +--- libc/ports/sysdeps/arm/eabi/fsetexcptflg.c 10 Oct 2005
>> 15:29:32 -0000 1.1
>> > ++++ libc/ports/sysdeps/arm/eabi/fsetexcptflg.c 24 Oct 2006
>> 19:17:51 -0000
>> > +@@ -24,12 +24,12 @@
>> > + #include <unistd.h>
>> > + #include <ldsodefs.h>
>> > + #include <dl-procinfo.h>
>> > +-#include <asm/procinfo.h>
>> > ++#include <sysdep.h>
>> > +
>> > + int
>> > + __fesetexceptflag (const fexcept_t *flagp, int excepts)
>> > + {
>> > +- if (GLRO (dl_hwcap) & HWCAP_VFP)
>> > ++ if (GLRO (dl_hwcap) & HWCAP_ARM_VFP)
>> > + {
>> > + fexcept_t temp;
>> > +
>> > +Index: libc/ports/sysdeps/arm/eabi/ftestexcept.c
>> > +===================================================================
>> > +RCS file: /cvs/glibc/ports/sysdeps/arm/eabi/ftestexcept.c,v
>> > +retrieving revision 1.1
>> > +diff -u -r1.1 ftestexcept.c
>> > +--- libc/ports/sysdeps/arm/eabi/ftestexcept.c 10 Oct 2005
>> 15:29:32 -0000 1.1
>> > ++++ libc/ports/sysdeps/arm/eabi/ftestexcept.c 24 Oct 2006
>> 19:17:51 -0000
>> > +@@ -23,12 +23,12 @@
>> > + #include <unistd.h>
>> > + #include <ldsodefs.h>
>> > + #include <dl-procinfo.h>
>> > +-#include <asm/procinfo.h>
>> > ++#include <sysdep.h>
>> > +
>> > + int
>> > + fetestexcept (int excepts)
>> > + {
>> > +- if (GLRO (dl_hwcap) & HWCAP_VFP)
>> > ++ if (GLRO (dl_hwcap) & HWCAP_ARM_VFP)
>> > + {
>> > + fexcept_t temp;
>> > +
>> > +Index: libc/ports/sysdeps/arm/eabi/setfpucw.c
>> > +===================================================================
>> > +RCS file: /cvs/glibc/ports/sysdeps/arm/eabi/setfpucw.c,v
>> > +retrieving revision 1.1
>> > +diff -u -r1.1 setfpucw.c
>> > +--- libc/ports/sysdeps/arm/eabi/setfpucw.c 10 Oct 2005
>> 15:29:32 -0000 1.1
>> > ++++ libc/ports/sysdeps/arm/eabi/setfpucw.c 24 Oct 2006
>> 19:17:51 -0000
>> > +@@ -23,12 +23,12 @@
>> > + #include <unistd.h>
>> > + #include <ldsodefs.h>
>> > + #include <dl-procinfo.h>
>> > +-#include <asm/procinfo.h>
>> > ++#include <sysdep.h>
>> > +
>> > + void
>> > + __setfpucw (fpu_control_t set)
>> > + {
>> > +- if (GLRO (dl_hwcap) & HWCAP_VFP)
>> > ++ if (GLRO (dl_hwcap) & HWCAP_ARM_VFP)
>> > + {
>> > + fpu_control_t cw;
>> >
>> >
>> >
>> > --
>> > For unsubscribe information see http://sourceware.org/lists.html#faq
>> >
>> >
>>
>>
>> --
>> Sean Kelley
>>
>
>
> ------------------------------------------------------------------------
>
> sean@dubhdoite:~/Build2/crosstool-0.43$ sh demo-arm-softfloat-eabi.sh
> + TARBALLS_DIR=/home/sean/downloads
> + RESULT_TOP=/opt/crosstool
> + export TARBALLS_DIR RESULT_TOP
> + GCC_LANGUAGES=c,c++
> + export GCC_LANGUAGES
> + GLIBC_ADDON_NPTL=1
> + export GLIBC_ADDON_NPTL=1
> + mkdir -p /opt/crosstool
> + cat arm-softfloat-eabi.dat gcc-4.1.1-glibc-2.5.dat
> + eval TARGET=arm-softfloat-linux-gnueabi TARGET_CFLAGS="-O" GCC_EXTRA_CONFIG="--with-float=soft" GLIBC_EXTRA_CONFIG="--without-fp" BINUTILS_DIR=binutils-2.17 GCC_CORE_DIR=gcc-4.1.1 GCC_DIR=gcc-4.1.1 GLIBC_DIR=glibc-2.5 LINUX_DIR=linux-2.6.18.5 GLIBCTHREADS_FILENAME= GLIBCPORTS_FILENAME=glibc-ports-2.5 GLIBCLIBIDN_FILENAME=glibc-libidn-2.5 GDB_DIR=gdb-6.5 GLIBC_EXTRA_CONFIG="$GLIBC_EXTRA_CONFIG --with-tls --with-__thread --enable-kernel=2.6.0" sh all.sh -notest -nounpack
> + TARGET=arm-softfloat-linux-gnueabi TARGET_CFLAGS=-O GCC_EXTRA_CONFIG=--with-float=soft GLIBC_EXTRA_CONFIG=--without-fp BINUTILS_DIR=binutils-2.17 GCC_CORE_DIR=gcc-4.1.1 GCC_DIR=gcc-4.1.1 GLIBC_DIR=glibc-2.5 LINUX_DIR=linux-2.6.18.5 GLIBCTHREADS_FILENAME= GLIBCPORTS_FILENAME=glibc-ports-2.5 GLIBCLIBIDN_FILENAME=glibc-libidn-2.5 GDB_DIR=gdb-6.5 GLIBC_EXTRA_CONFIG= --with-tls --with-__thread --enable-kernel=2.6.0 sh all.sh -notest -nounpack
> DEJAGNU not set, so not running any regression tests
> GLIBC_ADDON_OPTIONS not set, so building all glibc add-on's
> KERNELCONFIG not set, so not configuring linux kernel
> + TOOLCOMBO=gcc-4.1.1-glibc-2.5
> + pwd
> + BUILD_DIR=/home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + pwd
> + TOP_DIR=/home/sean/Build2/crosstool-0.43
> + test -z
> + SRC_DIR=/home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + echo SRC_DIR not set, so source tarballs will be unpacked in the build directory
> SRC_DIR not set, so source tarballs will be unpacked in the build directory
> + test -w /tmp
> + TARBALLS_DIR=/home/sean/downloads
> + RESULT_TOP=/opt/crosstool
> + PREFIX=/opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi
> + export TOOLCOMBO
> + export PREFIX
> + export BUILD_DIR
> + export SRC_DIR
> + export TARBALLS_DIR
> + export TOP_DIR
> + [ 2 -gt 0 ]
> + opt_no_test=1
> + shift
> + [ 1 -gt 0 ]
> + opt_no_unpack=1
> + shift
> + [ 0 -gt 0 ]
> + test = 1
> + test 1 =
> + test =
> + [ -d /opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi ]
> + mv /opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi /opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi.del.29735
> + rm -rf /opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi.del.29735
> + mkdir -p /opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi
> + mkdir -p /home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + cd /home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + test =
> + sh /home/sean/Build2/crosstool-0.43/crosstool.sh
> BINUTILS_EXTRA_CONFIG not set, so not passing any extra options to binutils' configure script
> GLIBC_EXTRA_ENV not set, so not passing any extra environment variables to glibc's configure script
> GLIBC_EXTRA_CC_ARGS not set, so not passing any extra options to gcc when building glibc
> EXTRA_TARGET_CFLAGS not set, so not passing any extra cflags to gcc when building glibc
> USE_SYSROOT not set, so not configuring with --with-sysroot
> GCC_BUILD not set, assuming BUILD=output of config.guess
> GCC_HOST not set, assuming HOST=BUILD
> KERNELCONFIG not set, and no .config file found, so not configuring linux kernel
> SHARED_MODE not set, so defaulting to --enable-shared
> GLIBC_ADDON_OPTIONS not set
> Begin saving environment
> + eval echo AR=$AR
> + echo AR=
> AR=
> + eval echo AR=$AR
> + echo AR=
> + eval echo BINUTILS_DIR=$BINUTILS_DIR
> + echo BINUTILS_DIR=binutils-2.17
> BINUTILS_DIR=binutils-2.17
> + eval echo BINUTILS_DIR=$BINUTILS_DIR
> + echo BINUTILS_DIR=binutils-2.17
> + eval echo BINUTILS_EXTRA_CONFIG=$BINUTILS_EXTRA_CONFIG
> + echo BINUTILS_EXTRA_CONFIG=
> BINUTILS_EXTRA_CONFIG=
> + eval echo BINUTILS_EXTRA_CONFIG=$BINUTILS_EXTRA_CONFIG
> + echo BINUTILS_EXTRA_CONFIG=
> + eval echo BUILD=$BUILD
> + echo BUILD=i686-pc-linux-gnu
> BUILD=i686-pc-linux-gnu
> + eval echo BUILD=$BUILD
> + echo BUILD=i686-pc-linux-gnu
> + eval echo BUILD_DIR=$BUILD_DIR
> + echo BUILD_DIR=/home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> BUILD_DIR=/home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + eval echo BUILD_DIR=$BUILD_DIR
> + echo BUILD_DIR=/home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + eval echo CC=$CC
> + echo CC=
> CC=
> + eval echo CC=$CC
> + echo CC=
> + eval echo DEJAGNU=$DEJAGNU
> + echo DEJAGNU=
> DEJAGNU=
> + eval echo DEJAGNU=$DEJAGNU
> + echo DEJAGNU=
> + eval echo EXTRA_TARGET_CFLAGS=$EXTRA_TARGET_CFLAGS
> + echo EXTRA_TARGET_CFLAGS=
> EXTRA_TARGET_CFLAGS=
> + eval echo EXTRA_TARGET_CFLAGS=$EXTRA_TARGET_CFLAGS
> + echo EXTRA_TARGET_CFLAGS=
> + eval echo GCC_BUILD=$GCC_BUILD
> + echo GCC_BUILD=
> GCC_BUILD=
> + eval echo GCC_BUILD=$GCC_BUILD
> + echo GCC_BUILD=
> + eval echo GCC_CORE_DIR=$GCC_CORE_DIR
> + echo GCC_CORE_DIR=gcc-4.1.1
> GCC_CORE_DIR=gcc-4.1.1
> + eval echo GCC_CORE_DIR=$GCC_CORE_DIR
> + echo GCC_CORE_DIR=gcc-4.1.1
> + eval echo GCC_DIR=$GCC_DIR
> + echo GCC_DIR=gcc-4.1.1
> GCC_DIR=gcc-4.1.1
> + eval echo GCC_DIR=$GCC_DIR
> + echo GCC_DIR=gcc-4.1.1
> + eval echo GCC_EXTRA_CONFIG=$GCC_EXTRA_CONFIG
> + echo GCC_EXTRA_CONFIG=--with-float=soft
> GCC_EXTRA_CONFIG=--with-float=soft
> + eval echo GCC_EXTRA_CONFIG=$GCC_EXTRA_CONFIG
> + echo GCC_EXTRA_CONFIG=--with-float=soft
> + eval echo GCC_HOST=$GCC_HOST
> + echo GCC_HOST=
> GCC_HOST=
> + eval echo GCC_HOST=$GCC_HOST
> + echo GCC_HOST=
> + eval echo GCC_LANGUAGES=$GCC_LANGUAGES
> + echo GCC_LANGUAGES=c,c++
> GCC_LANGUAGES=c,c++
> + eval echo GCC_LANGUAGES=$GCC_LANGUAGES
> + echo GCC_LANGUAGES=c,c++
> + eval echo GDB_DIR=$GDB_DIR
> + echo GDB_DIR=gdb-6.5
> GDB_DIR=gdb-6.5
> + eval echo GDB_DIR=$GDB_DIR
> + echo GDB_DIR=gdb-6.5
> + eval echo GLIBC_ADDON_OPTIONS=$GLIBC_ADDON_OPTIONS
> + echo GLIBC_ADDON_OPTIONS==yes
> GLIBC_ADDON_OPTIONS==yes
> + eval echo GLIBC_ADDON_OPTIONS=$GLIBC_ADDON_OPTIONS
> + echo GLIBC_ADDON_OPTIONS==yes
> + eval echo GLIBC_DIR=$GLIBC_DIR
> + echo GLIBC_DIR=glibc-2.5
> GLIBC_DIR=glibc-2.5
> + eval echo GLIBC_DIR=$GLIBC_DIR
> + echo GLIBC_DIR=glibc-2.5
> + eval echo GLIBC_EXTRA_CC_ARGS=$GLIBC_EXTRA_CC_ARGS
> + echo GLIBC_EXTRA_CC_ARGS=
> GLIBC_EXTRA_CC_ARGS=
> + eval echo GLIBC_EXTRA_CC_ARGS=$GLIBC_EXTRA_CC_ARGS
> + echo GLIBC_EXTRA_CC_ARGS=
> + eval echo GLIBC_EXTRA_CONFIG=$GLIBC_EXTRA_CONFIG
> + echo GLIBC_EXTRA_CONFIG=--with-tls --with-__thread --with-tls --with-__thread --enable-kernel=2.6.0
> GLIBC_EXTRA_CONFIG=--with-tls --with-__thread --with-tls --with-__thread --enable-kernel=2.6.0
> + eval echo GLIBC_EXTRA_CONFIG=$GLIBC_EXTRA_CONFIG
> + echo GLIBC_EXTRA_CONFIG=--with-tls --with-__thread --with-tls --with-__thread --enable-kernel=2.6.0
> + eval echo GLIBC_EXTRA_ENV=$GLIBC_EXTRA_ENV
> + echo GLIBC_EXTRA_ENV=
> GLIBC_EXTRA_ENV=
> + eval echo GLIBC_EXTRA_ENV=$GLIBC_EXTRA_ENV
> + echo GLIBC_EXTRA_ENV=
> + eval echo JUST_DOWNLOAD=$JUST_DOWNLOAD
> + echo JUST_DOWNLOAD=
> JUST_DOWNLOAD=
> + eval echo JUST_DOWNLOAD=$JUST_DOWNLOAD
> + echo JUST_DOWNLOAD=
> + eval echo KERNELCONFIG=$KERNELCONFIG
> + echo KERNELCONFIG=
> KERNELCONFIG=
> + eval echo KERNELCONFIG=$KERNELCONFIG
> + echo KERNELCONFIG=
> + eval echo LINUX_DIR=$LINUX_DIR
> + echo LINUX_DIR=linux-2.6.18.5
> LINUX_DIR=linux-2.6.18.5
> + eval echo LINUX_DIR=$LINUX_DIR
> + echo LINUX_DIR=linux-2.6.18.5
> + eval echo LINUX_SANITIZED_HEADER_DIR=$LINUX_SANITIZED_HEADER_DIR
> + echo LINUX_SANITIZED_HEADER_DIR=
> LINUX_SANITIZED_HEADER_DIR=
> + eval echo LINUX_SANITIZED_HEADER_DIR=$LINUX_SANITIZED_HEADER_DIR
> + echo LINUX_SANITIZED_HEADER_DIR=
> + eval echo NO_DOWNLOAD=$NO_DOWNLOAD
> + echo NO_DOWNLOAD=
> NO_DOWNLOAD=
> + eval echo NO_DOWNLOAD=$NO_DOWNLOAD
> + echo NO_DOWNLOAD=
> + eval echo PREFIX=$PREFIX
> + echo PREFIX=/opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi
> PREFIX=/opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi
> + eval echo PREFIX=$PREFIX
> + echo PREFIX=/opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi
> + eval echo PTXDIST_DIR=$PTXDIST_DIR
> + echo PTXDIST_DIR=
> PTXDIST_DIR=
> + eval echo PTXDIST_DIR=$PTXDIST_DIR
> + echo PTXDIST_DIR=
> + eval echo SHARED_MODE=$SHARED_MODE
> + echo SHARED_MODE=--enable-shared
> SHARED_MODE=--enable-shared
> + eval echo SHARED_MODE=$SHARED_MODE
> + echo SHARED_MODE=--enable-shared
> + eval echo SRC_DIR=$SRC_DIR
> + echo SRC_DIR=/home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> SRC_DIR=/home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + eval echo SRC_DIR=$SRC_DIR
> + echo SRC_DIR=/home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + eval echo TARBALLS_DIR=$TARBALLS_DIR
> + echo TARBALLS_DIR=/home/sean/downloads
> TARBALLS_DIR=/home/sean/downloads
> + eval echo TARBALLS_DIR=$TARBALLS_DIR
> + echo TARBALLS_DIR=/home/sean/downloads
> + eval echo TARGET=$TARGET
> + echo TARGET=arm-softfloat-linux-gnueabi
> TARGET=arm-softfloat-linux-gnueabi
> + eval echo TARGET=$TARGET
> + echo TARGET=arm-softfloat-linux-gnueabi
> + eval echo TARGET_CFLAGS=$TARGET_CFLAGS
> + echo TARGET_CFLAGS=-O
> TARGET_CFLAGS=-O
> + eval echo TARGET_CFLAGS=$TARGET_CFLAGS
> + echo TARGET_CFLAGS=-O
> + eval echo TOP_DIR=$TOP_DIR
> + echo TOP_DIR=/home/sean/Build2/crosstool-0.43
> TOP_DIR=/home/sean/Build2/crosstool-0.43
> + eval echo TOP_DIR=$TOP_DIR
> + echo TOP_DIR=/home/sean/Build2/crosstool-0.43
> + eval echo USE_SYSROOT=$USE_SYSROOT
> + echo USE_SYSROOT=
> USE_SYSROOT=
> + eval echo USE_SYSROOT=$USE_SYSROOT
> + echo USE_SYSROOT=
> + set +x
> End saving environment
> + ARCH=arm
> + cd /opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi
> + pwd
> + PREFIX=/opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi
> + cd /home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + pwd
> + BUILD_DIR=/home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + cd /home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + pwd
> + SRC_DIR=/home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + cd /home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5/binutils-2.17
> cd: 1: can't cd to /home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5/binutils-2.17
> + pwd
> + BINUTILS_DIR=/home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + cd /home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5/gcc-4.1.1
> cd: 1: can't cd to /home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5/gcc-4.1.1
> + pwd
> + GCC_DIR=/home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + cd /home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5/gcc-4.1.1
> cd: 1: can't cd to /home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5/gcc-4.1.1
> + pwd
> + GCC_CORE_DIR=/home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + cd /home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5/linux-2.6.18.5
> cd: 1: can't cd to /home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5/linux-2.6.18.5
> + pwd
> + LINUX_HEADER_DIR=/home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + cd /home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5/glibc-2.5
> cd: 1: can't cd to /home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5/glibc-2.5
> + pwd
> + GLIBC_DIR=/home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + CORE_PREFIX=/home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5/gcc-core-prefix
> + test =
> + PATH=/opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi/bin:/home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5/gcc-core-prefix/bin:/opt/Komodo-3.5/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games
> + export PATH
> + mkdir -p /opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi/arm-softfloat-linux-gnueabi
> + touch /opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi/arm-softfloat-linux-gnueabi/test-if-write
> + test -w /opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi/arm-softfloat-linux-gnueabi/test-if-write
> + rm -f /opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi/arm-softfloat-linux-gnueabi/test-if-write
> + test -z
> + SYSROOT=/opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi/arm-softfloat-linux-gnueabi
> + HEADERDIR=/opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi/arm-softfloat-linux-gnueabi/include
> + BINUTILS_SYSROOT_ARG=--with-sysroot=/opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi/arm-softfloat-linux-gnueabi
> + GCC_SYSROOT_ARG_CORE=--without-headers
> + GCC_SYSROOT_ARG=--with-headers=/opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi/arm-softfloat-linux-gnueabi/include
> + GLIBC_SYSROOT_ARG=prefix=
> + mkdir -p /opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi/arm-softfloat-linux-gnueabi/lib
> + mkdir -p /opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi/arm-softfloat-linux-gnueabi/usr/lib
> + echo
>
> + echo Building for --target=arm-softfloat-linux-gnueabi, --prefix=/opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi
> Building for --target=arm-softfloat-linux-gnueabi, --prefix=/opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi
> + test -z
> + echo Prepare kernel headers
> Prepare kernel headers
> + cd /home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5
> + mkdir -p /opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi/arm-softfloat-linux-gnueabi/include
> + echo /opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi/arm-softfloat-linux-gnueabi/include
> + sed s/include//
> + INSTALL_HEADERS_DIR=/opt/crosstool/gcc-4.1.1-glibc-2.5/arm-softfloat-linux-gnueabi/arm-softfloat-linux-gnueabi/
> + test -z
> + test -f
> + test -f .config
> + awk /^VERSION =/ { print $3 } /home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5/Makefile
> awk: cannot open /home/sean/Build2/crosstool-0.43/build/arm-softfloat-linux-gnueabi/gcc-4.1.1-glibc-2.5/Makefile (No such file or directory)
> + KERNEL_VERSION=
>
--
Khem Raj
MontaVista Software Inc.
kraj@mvista.com
--
For unsubscribe information see http://sourceware.org/lists.html#faq
More information about the crossgcc
mailing list