anyone built crosstools with linux kernel 2.6.16.1?

[Niklaus]

On 4/6/06, Steve Iribarne (GMail) <netstv@gmail.com> wrote:
> So here is a snip of the error....
>
>
>
> make[2]: Entering directory
> `/home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/build-gcc-core/gcc'
> for d in libgcc; do \
>   if [ -d $d ]; then true; else /bin/sh
> /home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/gcc-3.4.1/gcc/mkinstalldirs
> $d; fi; \
> done
> mkdir -p -- libgcc
> if [ -f stmp-dirs ]; then true; else touch stmp-dirs; fi
> /home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/build-gcc-core/gcc/xgcc
> -B/home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/build-gcc-core/gcc/
> -B/home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/gcc-core-prefix/powerpc-linux-gnu/bin/
> -B/home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/gcc-core-prefix/powerpc-linux-gnu/lib/
> -isystem /home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/gcc-core-prefix/powerpc-linux-gnu/include
> -isystem /home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/gcc-core-prefix/powerpc-linux-gnu/sys-include
> -O2  -DIN_GCC -DCROSS_COMPILE   -W -Wall -Wwrite-strings
> -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition
> -isystem ./include  -fPIC -g  -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED
> -Dinhibit_libc -I. -I.
> -I/home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/gcc-3.4.1/gcc
> -I/home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/gcc-3.4.1/gcc/.
> -I/home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/gcc-3.4.1/gcc/../include
>   -DL_muldi3 -c
> /home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/gcc-3.4.1/gcc/libgcc2.c
> -o libgcc/./_muldi3.o
> In file included from
> /home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/gcc-core-prefix/powerpc-linux-gnu/include/signal.h:326,
>                  from
> /home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/gcc-3.4.1/gcc/config/rs6000/linux.h:100,
>                  from ./tm.h:11,
>                  from
> /home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/gcc-3.4.1/gcc/libgcc2.c:43:
> /home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/gcc-core-prefix/powerpc-linux-gnu/include/bits/sigcontext.h:28:29:
> asm/sigcontext.h: No such file or directory

I think your linux headers are not copied properly .

> In file included from ./tm.h:11,
>                  from
> /home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/gcc-3.4.1/gcc/libgcc2.c:43:
> /home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/gcc-3.4.1/gcc/config/rs6000/linux.h:110:
> error: field `uc_mcontext' has incomplete type
> make[2]: *** [libgcc/./_muldi3.o] Error 1
> make[2]: Leaving directory
> `/home3/stv/build/crosstool/crosstool-0.42/build/powerpc-linux-gnu/gcc-3.4.1-glibc-2.3.3/build-gcc-core/gcc'
> make[1]: *** [stmp-multilib] Error 2
>
>
>
>
> The only change I made here was getting the 2.6.16.1 kernel source.
> If I get the 2.6.8 (I think that's the default for the 0.43 script),
> everything works.
>
> I can actually compile the 2.6.16.1 kernel once I built the cross
> compiler.  Which has me baffled.
>
> -stv
>
> On 4/5/06, Niklaus <niklaus@gmail.com> wrote:
> > On 4/5/06, Steve Iribarne (GMail) <netstv@gmail.com> wrote:
> > > Seems that it barfs.  I'm not 100% sure yet, but I'm just seeing if
> > > anyone has built this with kernel 2.6.16.1.
> > >
> > > Thanks.
> > > -stv
> > >
> > Yes i did for target mips-deb-linux.
> > No probs at all. Which target
> >
> > I have a script for mips-deb-linux . I can send it to you if you want.
> >
> > > --
> > > For unsubscribe information see http://sourceware.org/lists.html#faq
> > >
> > >
> >
>

--
For unsubscribe information see http://sourceware.org/lists.html#faq