Problems with crossgcc and AMD Au1550

[Daniel Kegel]

Chris Jones wrote:
> Attempting to cross-compile a kernel module for the AMD AU1550.
> This may be a GCC related problem. If so let me know and I'll redirect
> my questions elsewhere.
> 
> I'm guessing that the Au1550 does not support these instructions.
> 
> I'm using crosstool 0.27, mipsel, gcc3.2.3-glibc-2.2.3
> 
> Any ideas would be greatly appreciated.
> ...
> mipsel-unknown-linux-gnu-gcc -I/home/cjones/dev_au1550/linux/include -O6
> -DMODULE -D__KERNEL__ -DEXPORT_SYMTAB
> -I/home/cjones/dev_au1550/linux/drivers/net -Wall -I.
> -Wstrict-prototypes -fomit-frame-pointer
> -I/home/cjones/dev_au1550/linux/drivers/net/wan -I
> /home/cjones/dev_au1550/linux/include
> -I/home/cjones/dev_au1550/linux/include/net -DMODVERSIONS -include
> /home/cjones/dev_au1550/linux/include/linux/modversions.h
> -DSTANDALONE_ZAPATA -c zaptel.c
> /tmp/cccbkQlh.s: Assembler messages:
> /tmp/cccbkQlh.s:7251: Error: opcode not supported at this ISA level
> (mips1) `ll $2,__this_module+16'

How did you configure crosstool?  Did you tell it about your
particular CPU type?

Also, if possible, could you use crosstool-0.28-rc24 in future tests?
- Dan

------
Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sources.redhat.com