How to test ARM pre-built toolchain?

[Jiang Robert]

To test the pre-built toolchain, for example,x86 to ARM cross toolchain( 
ftp://ftp.arm.linux.org.uk/pub/armlinux/toolchain/cross-3.2.tar.gz ), must 
I re-build the toolchain? I just want to test the toolchain.


>From: Robert Schwebel <robert@schwebel.de>
>To: Jiang Robert <cretaceousstone@hotmail.com>
>CC: crossgcc@sources.redhat.com
>Subject: Re: How to test ARM pre-built toolchain?
>Date: Fri, 20 Aug 2004 09:31:52 +0200
>
>Hi,
>
>On Fri, Aug 20, 2004 at 04:55:12AM +0000, Jiang Robert wrote:
> > I'm testing an ARM pre-built toolchain.But I can't get the source code
> > of the patches.
>
>You can use crosstool to build your own toolchain from the original
>sources (plus necessary patches). Look at Dan Kegel's homepage.
>
> > Target board: ARM linux 2.4.21+ busybox 1.0-pre7
>
>Hmm, any reason for using such a prehistoric kernel?
>
> > I have setup rshd and rlogind serivces on the target board and tried
> > example test according to dejagnu-remote-howto.html. It secceeded. My
> > board definition file is "myboard-rshrcp.exp".
>
>What's that? It doesn't look like something used by normal GNU
>toolchains.
>
>Robert
>--
>  Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
>  Pengutronix - Linux Solutions for Science and Industry
>    Handelsregister:  Amtsgericht Hildesheim, HRA 2686
>      Hornemannstraße 12,  31137 Hildesheim, Germany
>     Phone: +49-5121-28619-0 |  Fax: +49-5121-28619-4
>
>------
>Want more information?  See the CrossGCC FAQ, 
http://www.objsw.com/CrossGCC/
>Want to unsubscribe? Send a note to 
crossgcc-unsubscribe@sources.redhat.com
>

_________________________________________________________________
Ãâ·ÑÏÂÔØ MSN Explorer:   http://explorer.msn.com/lccn/  


------
Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sources.redhat.com