build-crossgcc for m68k-elf - help

[ian.gillingham@oxinst.co.uk]

Some of you may have spotted the line:
     # exit 1
in my snippet. The '#' shouldn't be there - I tried commenting out the
'exit' to see what happened... (I didn't like the result!) and forgot to
remove the '#' before cutting and pasting.

Ian

----- Original Message -----
From: <ian.gillingham@oxinst.co.uk>
To: <>
Sent: Friday, May 23, 2003 3:03 AM
Subject: build-crossgcc for m68k-elf - help


> Hi,
>
> I've been quietly sitting in the background listening to this discussion
and
> gleaning lots of very useful info. I'm trying to build a crossgcc to
target
> m68k-elf, using Bill Gatliff's build-crossgcc.sh script. It always exits
> after having built binutils in the section labeled as:
> #
> # install headers needed to build bootstrap compiler
> #
> .
> . <snip>
> .
>     # these targets use newlib
>     arm-elf | h8300-coff | h8300-hitachi-hms | m68k-coff | m68k-elf |
> powerpc-eabi | sh-elf | sh-hms)
>
>     echo fixme
>     # exit 1
>
> What do I do for m68k-elf??
>
> Thanks,
> Ian Gillingham
>
> __________________________________
> Ian Gillingham
> Oxford Instruments Analytical
> Abingdon Technical Resource Group Leader
> e-mail to : ian.gillingham@oxinst.co.uk
>
>  ###  OXFORD INSTRUMENTS   http://www.oxford-instruments.com/  ###
>
> Unless stated above to be non-confidential, this E-mail and any
> attachments are private and confidential and are for the addressee
> only and may not be used, copied or disclosed save to the addressee.
> If you have received this E-mail in error please notify us upon receipt
> and delete it from your records. Internet communications are not secure
> and Oxford Instruments is not responsible for their abuse by third
> parties nor for any alteration or corruption in transmission.
>
>
> ------
> Want more information?  See the CrossGCC FAQ,
http://www.objsw.com/CrossGCC/
> Want to unsubscribe? Send a note to
crossgcc-unsubscribe@sources.redhat.com
>
>

+++ Virus-scanned by Messagelabs for Oxford Instruments +++

 ###  OXFORD INSTRUMENTS   http://www.oxford-instruments.com/  ### 

Unless stated above to be non-confidential, this E-mail and any 
attachments are private and confidential and are for the addressee 
only and may not be used, copied or disclosed save to the addressee.
If you have received this E-mail in error please notify us upon receipt 
and delete it from your records. Internet communications are not secure 
and Oxford Instruments is not responsible for their abuse by third 
parties nor for any alteration or corruption in transmission. 


------
Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sources.redhat.com