Gcc for MPC5xx family (MPC555, MPC565)
Peter Reilley
micrio@mv.com
Thu Apr 3 14:52:00 GMT 2003
David;
The GNU tools support the MPC5XX quite nicely. You can
get full precompiled GNU tool sets at the Macraigor web site
for both Windows and Linux.
www.macraigor.com
JTAG/BDM debugging of the MPC5XX processor is supported
using the Macraigor Wiggler and Raven under Windows. The
Macraigor Raven is supported under Linux.
Note; I work for Macraigor.
Pete.
----- Original Message -----
From: "David Brown" <david@westcontrol.com>
To: <crossgcc@sources.redhat.com>
Sent: Thursday, April 03, 2003 4:14 AM
Subject: Gcc for MPC5xx family (MPC555, MPC565)
> We are looking at using an MPC5xx chip on a couple of projects in the near
> future, and are therefore looking for available tools. I already use gcc
> for a number of micros (avr, msp, m68k), so it is the obvious choice. In
> particular, I use gcc for the 68332, along with a P&E Micro BDM cable and
> gdb for debugging. As far as I can see, the standard gcc source supports
> the PowerPC, but does not have a specific MPC5xx target. Does anyone have
> experiance of using gcc with the MPC family, or have any pointers to
> websites about it? Are there patched versions aimed at embedded systems
> (such as there are for the 68k, including such useful things as interrupt
> routine support)? Any pointers to get me started would be much
appreciated.
>
> David Brown
> Norway.
>
>
>
>
>
> ------
> Want more information? See the CrossGCC FAQ,
http://www.objsw.com/CrossGCC/
> Want to unsubscribe? Send a note to
crossgcc-unsubscribe@sources.redhat.com
>
------
Want more information? See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sources.redhat.com
More information about the crossgcc
mailing list