Using GDB with M32R MSA2000 Board
Aklilu Noah
naklilu@ualberta.ca
Sat Jan 6 13:53:00 GMT 2001
Hi
I trying to get gdb (really insight 5.0)
to talk to a Mitusbishi MSA2000G01 (the m32r
evaluation board). I switched the board to monitor/
self-debugging mode (instead of the default db32r ethernet
mode) and get the Mon2000> prompt
using a terminal emulator. When I tell gdb to
connect to the same com port using mon2000 as the
target (target mon2000 /dev/com1) it comes back with the error
listed below.
I tried other target modes such as target m32r /dev/com1
but it simply times out. I am running gdb/insight under cygwin
1.1.7 on an NT 4 host (and compiled it there as well). Any
comments/tips will be appreciated.
Noah.
-- start here
monitor_supply_register (21): bad value from monitor: 7FFFFFF0 psw = 000000C0 (BSM=0, BIE=0,
BC=0, SM=1, IE=1, C=0)
bpc = 00000000
r0 = 00000000 r1 = 00000000 r2 = 00000000 r3 = 00000000
r4 = 00000000 r5 = 00000000 r6 = 00000000 r7 = 00000000
r8 = 00000000 r9 = 00000000 r10 = 00000000 r11 = 00000000
r12 = 00000000 r13 = 00000000 r14 = 00000000
spu = 009E3200 spi = 009E4200 acc = 00000000:00000000
>.
while executing
"gdb_cmd "set remotebaud $baud""
(object "::.targetselection0.targetselection" method "::TargetSelection::change_baud" body line 4)
invoked from within
"::.targetselection0.targetselection change_baud .targetselection0.targetselection.f.lab.lf.childsite.cb 9600"
(in namespace inscope "::TargetSelection" script line 1)
invoked from within
"namespace inscope ::TargetSelection {::.targetselection0.targetselection change_baud}
.targetselection0.targetselection.f.lab.lf.childsite.cb 9600"
("after" script)errorCode is NONE
--end here
------
Want more information? See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sourceware.cygnus.com
More information about the crossgcc
mailing list