libiberty can't find target header files

[Teri McManus]

We are using VxWorks for Hitachi SH2.

To find target header files we need to use -nostdinc and -I for include
directories as shown in the following compile line.


ccsh -BC:\Tornado/host/x86-win32/lib/gcc-lib/ -v -c -m2 -ansi -nostdinc -O
-fvolatile -fno-builtin -Wall -I/h -I. -I../include -I../diag
-IC:\Tornado\target\config\all -IC:\Tornado\target/h
-IC:\Tornado\target/src/config -IC:\Tornado\target/src/drv -DCPU=SH7040 -o
%1.o %1.c

> -----Original Message-----
> From: Troy Cauble [ mailto:troy@lucent.com ]
> Sent: Thursday, March 16, 2000 8:41 AM
> To: Peter Evans
> Cc: crossgcc@sourceware.cygnus.com
> Subject: Re: libiberty can't find target header files
> 
> 
> 
> 
> I've been tempted to try --with-headers also, but I was going to
> set it to /path/to/vxworks/headers .  Since I'm compiling for
> vxWorks, I don't think I'll need to build newlib or libc.
> 
> If you don't have any other header file candidates (you didn't 
> mention a target OS), I suppose you might have done the right 
> thing.  The FAQ is unclear here.  It clearly says build GCC 
> before newlib.  But then again it says unpack everything first.
> 
> Can anyone clarify?
> 
> -troy
> 
> 
> Peter Evans wrote:
> > 
> > My build for Hitachi H8 couldn't find those files either.
> > 
> > I found some clues in the mail archives and then added
> > 
> > --with-headers=/path/to/newlib-1.8.2/newlib/libc/include
> > 
> > and finally got a successful build.
> > 
> > I would appreciate any comments on whether this is the 
> right thing to do or
> > not as I've never used the gnu tools before and only managed to do a
> > successful build of gcc for H8 yesterday.
> > 
> > If anyone out there is using gcc/gdb with a Hitachi H8/3048 or 3067
> > evaluation board and has got as far as running gcc 
> generated code on it
> > please get in touch.
> > 
> > Peter
> > 
> >  -----Original Message-----
> > From:   Troy Cauble [ mailto:troy@lucent.com ]
> > Sent:   15 March 2000 23:52
> > To:     crossgcc@sourceware.cygnus.com
> > Subject:        libiberty can't find target header files
> > 
> > Hi all,
> > 
> > My arm-wrs-vxworks gcc build is failing to find target
> > header files while compiling the cross version of libiberty.
> > 
> > The 'make' is not trying to use ${prefix}/${target}/include
> > like it did for libgcc1 and libgcc2.
> > 
> > I didn't see anything in the 'configure' stuff that would
> > trigger that.  What am I missing?
> > 
> > If it matters, I had to make some typical configuration mods
> > to binutils-2.9.1 for arm-wrs-vxworks, but gcc-2.95.2 didn't
> > seem to need any...
> > 
> > Thanks,
> > -troy
> > 
> > /opt/vxtools/gcc-2.95.2/arm-wrs-vxworks/gcc/xgcc
> > -B/opt/vxtools/gcc-2.95.2/arm-w
> > rs-vxworks/gcc/ -B/opt/wind/host/linux/arm-wrs-vxworks/bin/ -c
> > -DHAVE_CONFIG_H -
> > g -O2 -I. -I../../../libiberty/../include  ../../../libiberty/argv.c
> > test x"no" != xyes || \
> >   /opt/vxtools/gcc-2.95.2/arm-wrs-vxworks/gcc/xgcc
> > -B/opt/vxtools/gcc-2.95.2/arm
> > -wrs-vxworks/gcc/ -B/opt/wind/host/linux/arm-wrs-vxworks/bin/ -c
> > -DHAVE_CONFIG_H
> >  -g -O2 -I. -I../../../libiberty/../include
> > ../../../libiberty/choose-temp.c -
> > o pic/choose-temp.o
> > /opt/vxtools/gcc-2.95.2/arm-wrs-vxworks/gcc/xgcc
> > -B/opt/vxtools/gcc-2.95.2/arm-w
> > rs-vxworks/gcc/ -B/opt/wind/host/linux/arm-wrs-vxworks/bin/ -c
> > -DHAVE_CONFIG_H -
> > g -O2 -I. -I../../../libiberty/../include  
> ../../../libiberty/choose-temp.c
> > ../../../libiberty/choose-temp.c:29: stdio.h: No such file 
> or directory
> > ../../../libiberty/choose-temp.c:30: sys/types.h: No such 
> file or directory
> > ../../../libiberty/choose-temp.c:32: unistd.h: No such file 
> or directory
> > ../../../libiberty/choose-temp.c:35: stdlib.h: No such file 
> or directory
> > ../../../libiberty/choose-temp.c:38: sys/file.h: No such 
> file or directory
> > make[1]: *** [choose-temp.o] Error 1
> > make[1]: Leaving directory
> > `/opt/vxtools/gcc-2.95.2/arm-wrs-vxworks/arm-wrs-vxwo
> > rks/libiberty'
> > make: *** [all-target-libiberty] Error 2
> > 
> > ------
> > Want more information?  See the CrossGCC FAQ, 
> http://www.objsw.com/CrossGCC/
> > Want to unsubscribe? Send a 
> note to
> > crossgcc-unsubscribe@sourceware.cygnus.com
> 
> ------
> Want more information?  See the CrossGCC FAQ, 
> http://www.objsw.com/CrossGCC/
> Want to unsubscribe? Send a 
> note to crossgcc-unsubscribe@sourceware.cygnus.com
> 

------
Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sourceware.cygnus.com