[PATCH v2] RISC-V: PR32014, .option directives shuoldn't affect elf attribute.
Nelson Chu
nelson@rivosinc.com
Fri Aug 2 03:01:20 GMT 2024
The .option arch/rvc/norvc/push/pop directives can only take effect for a
small/large specific code region, so they are not file-level architecture
setting. They should only affect the mapping symbols only rather than the
file-level elf architecture attribute. Otherwise, the elf architecture
attribute will appear to missing some extensions when -flto merges files
with different .option architecture settings.
gas/
PR 32014
* config/tc-riscv.c (file_arch_str): New const char *, rather than the
arch_str in the riscv_rps_as.subset_list, it's file-level so only be
affected by .attribute arch directive.
(riscv_reset_subsets_list_arch_str): Renamed to riscv_set_arch_str, and
also can handle both file_arch_str and arch_str in subset_list, just
give the pointer address as the input.
(riscv_set_arch): Called by -march and .attribute arch, so set both
file_arch_str and arch_str in subset_list.
(s_riscv_option): Updated .option arch/rvc/norvc/push/pop that only
set the arch_str in subset_list.
(riscv_write_out_attrs): Output elf architecture attribute according to
file_arch_str. Freed file_arch_str.
* doc/c-riscv.texi: Added destrbution that .option directives shouldn't
affect the elf attribute settings.
* testsuite/gas/riscv/option-arch.s: From option-arch-01/02/03 merged.
* testsuite/gas/riscv/option-arch-dis.d: Likewise, for dis-assembler.
* testsuite/gas/riscv/option-arch-attr.d: Likewise, to check readelf -A.
---
gas/config/tc-riscv.c | 28 +++++++++++--------
gas/doc/c-riscv.texi | 7 ++++-
gas/testsuite/gas/riscv/option-arch-01.s | 10 -------
gas/testsuite/gas/riscv/option-arch-01a.d | 14 ----------
gas/testsuite/gas/riscv/option-arch-02.d | 8 ------
gas/testsuite/gas/riscv/option-arch-02.s | 8 ------
gas/testsuite/gas/riscv/option-arch-03.d | 8 ------
gas/testsuite/gas/riscv/option-arch-03.s | 3 --
.../{option-arch-01b.d => option-arch-attr.d} | 3 +-
gas/testsuite/gas/riscv/option-arch-dis.d | 26 +++++++++++++++++
gas/testsuite/gas/riscv/option-arch.s | 11 ++++++++
11 files changed, 60 insertions(+), 66 deletions(-)
delete mode 100644 gas/testsuite/gas/riscv/option-arch-01.s
delete mode 100644 gas/testsuite/gas/riscv/option-arch-01a.d
delete mode 100644 gas/testsuite/gas/riscv/option-arch-02.d
delete mode 100644 gas/testsuite/gas/riscv/option-arch-02.s
delete mode 100644 gas/testsuite/gas/riscv/option-arch-03.d
delete mode 100644 gas/testsuite/gas/riscv/option-arch-03.s
rename gas/testsuite/gas/riscv/{option-arch-01b.d => option-arch-attr.d} (77%)
create mode 100644 gas/testsuite/gas/riscv/option-arch-dis.d
create mode 100644 gas/testsuite/gas/riscv/option-arch.s
diff --git a/gas/config/tc-riscv.c b/gas/config/tc-riscv.c
index c09bd429bab..142a9e4754d 100644
--- a/gas/config/tc-riscv.c
+++ b/gas/config/tc-riscv.c
@@ -162,6 +162,7 @@ struct riscv_ip_error
static const char default_arch[] = DEFAULT_ARCH;
static const char *default_arch_with_ext = DEFAULT_RISCV_ARCH_WITH_EXT;
+static const char *file_arch_str = NULL;
static enum riscv_spec_class default_isa_spec = ISA_SPEC_CLASS_NONE;
static enum riscv_spec_class default_priv_spec = PRIV_SPEC_CLASS_NONE;
@@ -305,15 +306,17 @@ static riscv_parse_subset_t riscv_rps_as =
true, /* check_unknown_prefixed_ext. */
};
-/* Update the architecture string in the subset_list. */
+/* Update file/function-level architecture string according to the
+ subset_list. */
static void
-riscv_reset_subsets_list_arch_str (void)
+riscv_set_arch_str (const char **arch_str_p)
{
riscv_subset_list_t *subsets = riscv_rps_as.subset_list;
- if (subsets->arch_str != NULL)
- free ((void *) subsets->arch_str);
- subsets->arch_str = riscv_arch_str (xlen, subsets);
+ const char *arch_str = *arch_str_p;
+ if (arch_str != NULL)
+ free ((void *) arch_str);
+ *arch_str_p = riscv_arch_str (xlen, subsets);
}
/* This structure is used to hold a stack of .option values. */
@@ -347,7 +350,8 @@ riscv_set_arch (const char *s)
}
riscv_release_subset_list (riscv_rps_as.subset_list);
riscv_parse_subset (&riscv_rps_as, s);
- riscv_reset_subsets_list_arch_str ();
+ riscv_set_arch_str (&file_arch_str);
+ riscv_set_arch_str (&riscv_rps_as.subset_list->arch_str);
riscv_set_rvc (false);
if (riscv_subset_supports (&riscv_rps_as, "c")
@@ -4811,13 +4815,13 @@ s_riscv_option (int x ATTRIBUTE_UNUSED)
if (strcmp (name, "rvc") == 0)
{
riscv_update_subset (&riscv_rps_as, "+c");
- riscv_reset_subsets_list_arch_str ();
+ riscv_set_arch_str (&riscv_rps_as.subset_list->arch_str);
riscv_set_rvc (true);
}
else if (strcmp (name, "norvc") == 0)
{
riscv_update_subset (&riscv_rps_as, "-c");
- riscv_reset_subsets_list_arch_str ();
+ riscv_set_arch_str (&riscv_rps_as.subset_list->arch_str);
riscv_set_rvc (false);
}
else if (strcmp (name, "pic") == 0)
@@ -4838,7 +4842,7 @@ s_riscv_option (int x ATTRIBUTE_UNUSED)
if (ISSPACE (*name) && *name != '\0')
name++;
riscv_update_subset (&riscv_rps_as, name);
- riscv_reset_subsets_list_arch_str ();
+ riscv_set_arch_str (&riscv_rps_as.subset_list->arch_str);
riscv_set_rvc (false);
if (riscv_subset_supports (&riscv_rps_as, "c")
@@ -5363,7 +5367,7 @@ s_riscv_insn (int x ATTRIBUTE_UNUSED)
static void
riscv_write_out_attrs (void)
{
- const char *arch_str, *priv_str, *p;
+ const char *priv_str, *p;
/* versions[0]: major version.
versions[1]: minor version.
versions[2]: revision version. */
@@ -5371,10 +5375,10 @@ riscv_write_out_attrs (void)
unsigned int i;
/* Re-write architecture elf attribute. */
- arch_str = riscv_rps_as.subset_list->arch_str;
- if (!bfd_elf_add_proc_attr_string (stdoutput, Tag_RISCV_arch, arch_str))
+ if (!bfd_elf_add_proc_attr_string (stdoutput, Tag_RISCV_arch, file_arch_str))
as_fatal (_("error adding attribute: %s"),
bfd_errmsg (bfd_get_error ()));
+ free ((void *) file_arch_str);
/* For the file without any instruction, we don't set the default_priv_spec
according to the privileged elf attributes since the md_assemble isn't
diff --git a/gas/doc/c-riscv.texi b/gas/doc/c-riscv.texi
index d3966692625..84bd5e339b1 100644
--- a/gas/doc/c-riscv.texi
+++ b/gas/doc/c-riscv.texi
@@ -178,7 +178,12 @@ instead of just
It's not expected that options are changed in this manner during regular use,
but there are a handful of esoteric cases like the one above where users need
to disable particular features of the assembler for particular code sequences.
-The complete list of option arguments is shown below:
+However, it's also useful to enable/disable the extensions for some specific
+code regions by @samp{.option arch, +-}. This is very common in the ifunc
+libraries. We can support functions which are implemented by different
+extensions in the same library, but these should not affect any file-level
+settings, like the elf architecture attribute. The complete list of option
+arguments is shown below:
@table @code
@item push
diff --git a/gas/testsuite/gas/riscv/option-arch-01.s b/gas/testsuite/gas/riscv/option-arch-01.s
deleted file mode 100644
index 50285fc8c73..00000000000
--- a/gas/testsuite/gas/riscv/option-arch-01.s
+++ /dev/null
@@ -1,10 +0,0 @@
-.attribute arch, "rv64ic"
-add a0, a0, a1
-.option push
-.option arch, +d2p0, -c, +xvendor1p0
-add a0, a0, a1
-frcsr a0 # Should add mapping symbol with ISA here, and then dump it to frcsr.
-.option push
-.option arch, +m3p0, +d3p0
-.option pop
-.option pop
diff --git a/gas/testsuite/gas/riscv/option-arch-01a.d b/gas/testsuite/gas/riscv/option-arch-01a.d
deleted file mode 100644
index 1d14c604dec..00000000000
--- a/gas/testsuite/gas/riscv/option-arch-01a.d
+++ /dev/null
@@ -1,14 +0,0 @@
-#as: -misa-spec=2.2
-#source: option-arch-01.s
-#objdump: -d
-
-.*:[ ]+file format .*
-
-
-Disassembly of section .text:
-
-0+000 <.text>:
-[ ]+[0-9a-f]+:[ ]+952e[ ]+add[ ]+a0,a0,a1
-[ ]+[0-9a-f]+:[ ]+00b50533[ ]+add[ ]+a0,a0,a1
-[ ]+[0-9a-f]+:[ ]+00302573[ ]+frcsr[ ]+a0
-#...
diff --git a/gas/testsuite/gas/riscv/option-arch-02.d b/gas/testsuite/gas/riscv/option-arch-02.d
deleted file mode 100644
index 3c27419f9d3..00000000000
--- a/gas/testsuite/gas/riscv/option-arch-02.d
+++ /dev/null
@@ -1,8 +0,0 @@
-#as: -misa-spec=2.2
-#readelf: -A
-#source: option-arch-02.s
-
-Attribute Section: riscv
-File Attributes
- Tag_RISCV_arch: "rv64i2p0_m3p0_f2p0_d3p0_c2p0_zmmul1p0_xvendor32x3p0"
-#...
diff --git a/gas/testsuite/gas/riscv/option-arch-02.s b/gas/testsuite/gas/riscv/option-arch-02.s
deleted file mode 100644
index e0f5de321d6..00000000000
--- a/gas/testsuite/gas/riscv/option-arch-02.s
+++ /dev/null
@@ -1,8 +0,0 @@
-.attribute arch, "rv64ic"
-add a0, a0, a1
-.option push
-.option arch, +d2p0, -c, +xvendor1p0
-add a0, a0, a1
-frcsr a0
-.option pop
-.option arch, +m3p0, +d3p0, +xvendor32x3p0
diff --git a/gas/testsuite/gas/riscv/option-arch-03.d b/gas/testsuite/gas/riscv/option-arch-03.d
deleted file mode 100644
index 62d7f7d5ed2..00000000000
--- a/gas/testsuite/gas/riscv/option-arch-03.d
+++ /dev/null
@@ -1,8 +0,0 @@
-#as:
-#readelf: -A
-#source: option-arch-03.s
-
-Attribute Section: riscv
-File Attributes
- Tag_RISCV_arch: "rv32i2p1_c2p0"
-#...
diff --git a/gas/testsuite/gas/riscv/option-arch-03.s b/gas/testsuite/gas/riscv/option-arch-03.s
deleted file mode 100644
index ccdb1c354b0..00000000000
--- a/gas/testsuite/gas/riscv/option-arch-03.s
+++ /dev/null
@@ -1,3 +0,0 @@
-.attribute arch, "rv64ic"
-.option arch, +d2p0, -c
-.option arch, rv32i2p1c2p0
diff --git a/gas/testsuite/gas/riscv/option-arch-01b.d b/gas/testsuite/gas/riscv/option-arch-attr.d
similarity index 77%
rename from gas/testsuite/gas/riscv/option-arch-01b.d
rename to gas/testsuite/gas/riscv/option-arch-attr.d
index 8f4284d5f15..8c1f6658796 100644
--- a/gas/testsuite/gas/riscv/option-arch-01b.d
+++ b/gas/testsuite/gas/riscv/option-arch-attr.d
@@ -1,8 +1,7 @@
#as: -misa-spec=2.2
+#source: option-arch.s
#readelf: -A
-#source: option-arch-01.s
Attribute Section: riscv
File Attributes
Tag_RISCV_arch: "rv64i2p0_c2p0"
-#...
diff --git a/gas/testsuite/gas/riscv/option-arch-dis.d b/gas/testsuite/gas/riscv/option-arch-dis.d
new file mode 100644
index 00000000000..6768fe72806
--- /dev/null
+++ b/gas/testsuite/gas/riscv/option-arch-dis.d
@@ -0,0 +1,26 @@
+#as: -misa-spec=2.2
+#source: option-arch.s
+#objdump: -d --syms --special-syms
+
+.*:[ ]+file format .*
+
+SYMBOL TABLE:
+0+00 l d .text 0+00 .text
+0+00 l d .data 0+00 .data
+0+00 l d .bss 0+00 .bss
+0+00 l .text 0+00 \$xrv64i2p0_c2p0
+0+02 l .text 0+00 \$xrv64i2p0_f2p0_d2p0_xvendor1p0
+0+0a l .text 0+00 \$xrv64i2p0_m3p0_f2p0_d3p0_c2p0_zmmul1p0_xvendor32x3p0
+0+0c l .text 0+00 \$xrv32i2p1_c2p0
+0+00 l d .riscv.attributes 0+00 .riscv.attributes
+
+
+Disassembly of section .text:
+
+0+000 <.text>:
+[ ]+0:[ ]+952e[ ]+add[ ]+a0,a0,a1
+[ ]+2:[ ]+00b50533[ ]+add[ ]+a0,a0,a1
+[ ]+6:[ ]+00302573[ ]+frcsr[ ]+a0
+[ ]+a:[ ]+952e[ ]+add[ ]+a0,a0,a1
+[ ]+c:[ ]+c8002573[ ]+.insn[ ]+4, 0xc8002573
+#...
diff --git a/gas/testsuite/gas/riscv/option-arch.s b/gas/testsuite/gas/riscv/option-arch.s
new file mode 100644
index 00000000000..4d2d261684a
--- /dev/null
+++ b/gas/testsuite/gas/riscv/option-arch.s
@@ -0,0 +1,11 @@
+.attribute arch, "rv64ic" # file-level, rv64ic
+add a0, a0, a1
+.option push
+.option arch, +d2p0, -c, +xvendor1p0
+add a0, a0, a1 # func-level, rv64i_d2p0_xvendor1p0
+frcsr a0
+.option pop
+.option arch, +m3p0, +d3p0, +xvendor32x3p0
+add a0, a0, a1 # func-level, rv64i_m3p0_d3p0_c_xvendor32x3p0
+.option arch, rv32i2p1c2p0 # FIXME: maybe we should adjust xlen in dis-assembler according to mappin symbols?
+rdcycleh a0 # func-level, rv32i2p1_c2p0
--
2.39.3 (Apple Git-146)
More information about the Binutils
mailing list