[PATCH 2/2] binutils: merge doc subdir up a level
Mike Frysinger
vapier@gentoo.org
Fri Nov 26 04:16:00 GMT 2021
This avoids a recursive make into the doc subdir and speeds up the
build slightly. It also allows for more parallelism.
---
binutils/Makefile.am | 8 +-
binutils/Makefile.in | 594 +++++++++++++-
binutils/configure.ac | 2 +-
binutils/doc/Makefile.in | 1045 ------------------------
binutils/doc/{Makefile.am => local.mk} | 102 ++-
5 files changed, 608 insertions(+), 1143 deletions(-)
delete mode 100644 binutils/doc/Makefile.in
rename binutils/doc/{Makefile.am => local.mk} (77%)
diff --git a/binutils/Makefile.am b/binutils/Makefile.am
index 9ceb63da7b80..f54dadd921dc 100644
--- a/binutils/Makefile.am
+++ b/binutils/Makefile.am
@@ -17,13 +17,15 @@
# <http://www.gnu.org/licenses/>.
#
-AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
+AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects info-in-builddir no-texinfo.tex
ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
-SUBDIRS = doc po
+SUBDIRS = po
tooldir = $(exec_prefix)/$(target_alias)
+MAINTAINERCLEANFILES =
+
## These aren't set by automake, because they appear in
## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
## thus is not seen by automake.
@@ -552,3 +554,5 @@ install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
else true; \
fi; \
done
+
+include doc/local.mk
diff --git a/binutils/Makefile.in b/binutils/Makefile.in
index 1986261f9e33..336644a3983a 100644
--- a/binutils/Makefile.in
+++ b/binutils/Makefile.in
@@ -32,6 +32,24 @@
# <http://www.gnu.org/licenses/>.
#
+#
+# Copyright (C) 2012-2021 Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; see the file COPYING3. If not see
+# <http://www.gnu.org/licenses/>.
+#
+
VPATH = @srcdir@
am__is_gnu_make = { \
@@ -167,7 +185,8 @@ am__EXEEXT_10 = objcopy$(EXEEXT)
am__EXEEXT_11 = addr2line$(EXEEXT)
am__EXEEXT_12 = readelf$(EXEEXT)
am__EXEEXT_13 = elfedit$(EXEEXT)
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" \
+ "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
am__EXEEXT_14 = nm-new$(EXEEXT)
am__EXEEXT_15 = strip-new$(EXEEXT)
am__EXEEXT_16 = cxxfilt$(EXEEXT)
@@ -356,6 +375,45 @@ SOURCES = $(addr2line_SOURCES) $(ar_SOURCES) $(EXTRA_ar_SOURCES) \
$(size_SOURCES) $(srconv_SOURCES) $(strings_SOURCES) \
$(strip_new_SOURCES) $(sysdump_SOURCES) \
testsuite/gentestdlls.c $(windmc_SOURCES) $(windres_SOURCES)
+AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
+am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
+am__v_DVIPS_0 = @echo " DVIPS " $@;
+am__v_DVIPS_1 =
+AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
+am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
+am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
+am__v_MAKEINFO_1 =
+AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
+am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
+am__v_INFOHTML_0 = @echo " INFOHTML" $@;
+am__v_INFOHTML_1 =
+AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
+am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
+am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
+am__v_TEXI2DVI_1 =
+AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
+am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
+am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
+am__v_TEXI2PDF_1 =
+AM_V_texinfo = $(am__v_texinfo_@AM_V@)
+am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
+am__v_texinfo_0 = -q
+am__v_texinfo_1 =
+AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
+am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
+am__v_texidevnull_0 = > /dev/null
+am__v_texidevnull_1 =
+INFO_DEPS = doc/binutils.info
+am__TEXINFO_TEX_DIR = $(srcdir)
+DVIS = doc/binutils.dvi
+PDFS = doc/binutils.pdf
+PSS = doc/binutils.ps
+HTMLS = doc/binutils.html
+TEXINFOS = doc/binutils.texi
+TEXI2PDF = $(TEXI2DVI) --pdf --batch
+MAKEINFOHTML = $(MAKEINFO) --html
+AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
+DVIPS = dvips
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
@@ -369,6 +427,9 @@ am__can_run_installinfo = \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
@@ -569,10 +630,11 @@ top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
zlibdir = @zlibdir@
zlibinc = @zlibinc@
-AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
+AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects info-in-builddir no-texinfo.tex
ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
-SUBDIRS = doc po
+SUBDIRS = po
tooldir = $(exec_prefix)/$(target_alias)
+MAINTAINERCLEANFILES = $(man_MANS) doc/binutils.info doc/cxxfilt.man
# Automake 1.10+ disables lex and yacc output file regeneration if
# maintainer mode is disabled. Avoid this.
@@ -771,14 +833,52 @@ DISTCLEANFILES = sysroff.c sysroff.h site.exp development.exp \
MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
binutils.log binutils.sum abcdefgh*
+
+# What version of the manual you want; "all" includes everything
+CONFIG = all
+
+# Options to extract the man page from as.texinfo
+MANCONF = -Dman
+TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
+POD2MAN = pod2man --center="GNU Development Tools" \
+ --release="binutils-$(VERSION)" --section=1
+
+
+# List of man pages generated from binutils.texi
+man_MANS = \
+ doc/addr2line.1 \
+ doc/ar.1 \
+ doc/dlltool.1 \
+ doc/nm.1 \
+ doc/objcopy.1 \
+ doc/objdump.1 \
+ doc/ranlib.1 \
+ doc/readelf.1 \
+ doc/size.1 \
+ doc/strings.1 \
+ doc/strip.1 \
+ doc/elfedit.1 \
+ doc/windres.1 \
+ doc/windmc.1 \
+ doc/$(DEMANGLER_NAME).1
+
+info_TEXINFOS = doc/binutils.texi
+binutils_TEXI = $(srcdir)/doc/binutils.texi
+AM_MAKEINFOFLAGS = -I "$(srcdir)/doc" -I "$(top_srcdir)/../libiberty" \
+ -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc \
+ --no-split
+
+TEXI2DVI = texi2dvi -I "$(srcdir)/doc" -I "$(top_srcdir)/../libiberty" \
+ -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
+
all: $(BUILT_SOURCES) config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
-.SUFFIXES: .c .l .lo .o .obj .y
+.SUFFIXES: .c .dvi .l .lo .o .obj .ps .y
am--refresh: Makefile
@:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/doc/local.mk $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
@@ -800,6 +900,7 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
+$(srcdir)/doc/local.mk $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
@@ -1139,6 +1240,186 @@ clean-libtool:
distclean-libtool:
-rm -f libtool config.lt
+doc/$(am__dirstamp):
+ @$(MKDIR_P) doc
+ @: > doc/$(am__dirstamp)
+
+doc/binutils.info: doc/binutils.texi
+ @test -f doc/$(am__dirstamp) || $(MAKE) $(AM_MAKEFLAGS) doc/$(am__dirstamp)
+ $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
+ rm -rf $$backupdir && mkdir $$backupdir && \
+ if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
+ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
+ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
+ done; \
+ else :; fi && \
+ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
+ -o $@ `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi; \
+ then \
+ rc=0; \
+ else \
+ rc=$$?; \
+ $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
+ fi; \
+ rm -rf $$backupdir; exit $$rc
+
+doc/binutils.dvi: doc/binutils.texi doc/$(am__dirstamp)
+ $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
+ $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
+ `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi
+
+doc/binutils.pdf: doc/binutils.texi doc/$(am__dirstamp)
+ $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
+ $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
+ `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi
+
+doc/binutils.html: doc/binutils.texi doc/$(am__dirstamp)
+ $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
+ $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
+ -o $(@:.html=.htp) `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi; \
+ then \
+ rm -rf $@ && mv $(@:.html=.htp) $@; \
+ else \
+ rm -rf $(@:.html=.htp); exit 1; \
+ fi
+.dvi.ps:
+ $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ $(DVIPS) $(AM_V_texinfo) -o $@ $<
+
+uninstall-dvi-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
+ rm -f "$(DESTDIR)$(dvidir)/$$f"; \
+ done
+
+uninstall-html-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
+ rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
+ done
+
+uninstall-info-am:
+ @$(PRE_UNINSTALL)
+ @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
+ list='$(INFO_DEPS)'; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
+ if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
+ then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
+ done; \
+ else :; fi
+ @$(NORMAL_UNINSTALL)
+ @list='$(INFO_DEPS)'; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
+ (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
+ echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
+ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
+ else :; fi); \
+ done
+
+uninstall-pdf-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
+ done
+
+uninstall-ps-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(PSS)'; test -n "$(psdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(psdir)/$$f"; \
+ done
+
+dist-info: $(INFO_DEPS)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ list='$(INFO_DEPS)'; \
+ for base in $$list; do \
+ case $$base in \
+ $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
+ esac; \
+ if test -f $$base; then d=.; else d=$(srcdir); fi; \
+ base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
+ for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
+ if test -f $$file; then \
+ relfile=`expr "$$file" : "$$d/\(.*\)"`; \
+ test -f "$(distdir)/$$relfile" || \
+ cp -p $$file "$(distdir)/$$relfile"; \
+ else :; fi; \
+ done; \
+ done
+
+mostlyclean-aminfo:
+ -rm -rf doc/binutils.t2d doc/binutils.t2p
+
+clean-aminfo:
+ -test -z "doc/binutils.dvi doc/binutils.pdf doc/binutils.ps doc/binutils.html" \
+ || rm -rf doc/binutils.dvi doc/binutils.pdf doc/binutils.ps doc/binutils.html
+
+maintainer-clean-aminfo:
+ @list='$(INFO_DEPS)'; for i in $$list; do \
+ i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
+ echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
+ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
+ done
+install-man1: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
@@ -1281,10 +1562,10 @@ check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
check: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) check-recursive
-all-am: Makefile $(PROGRAMS) $(SCRIPTS) config.h
+all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(SCRIPTS) $(MANS) config.h
installdirs: installdirs-recursive
installdirs-am:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"; do \
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: $(BUILT_SOURCES)
@@ -1315,6 +1596,7 @@ clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+ -rm -f doc/$(am__dirstamp)
-rm -f testsuite/$(DEPDIR)/$(am__dirstamp)
-rm -f testsuite/$(am__dirstamp)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
@@ -1333,9 +1615,10 @@ maintainer-clean-generic:
-rm -f rcparse.c
-rm -f rcparse.h
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive
-clean-am: clean-binPROGRAMS clean-generic clean-libtool \
+clean-am: clean-aminfo clean-binPROGRAMS clean-generic clean-libtool \
clean-noinstPROGRAMS mostlyclean-am
distclean: distclean-recursive
@@ -1348,43 +1631,134 @@ distclean-am: clean-am distclean-DEJAGNU distclean-compile \
dvi: dvi-recursive
-dvi-am:
+dvi-am: $(DVIS)
html: html-recursive
-html-am:
+html-am: $(HTMLS) html-local
info: info-recursive
-info-am:
+info-am: $(INFO_DEPS) info-local
-install-data-am:
+install-data-am: install-info-am install-man
install-dvi: install-dvi-recursive
-install-dvi-am:
-
+install-dvi-am: $(DVIS)
+ @$(NORMAL_INSTALL)
+ @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
+ done
install-exec-am: install-binPROGRAMS install-binSCRIPTS \
install-exec-local
install-html: install-html-recursive
-install-html-am:
-
+install-html-am: $(HTMLS)
+ @$(NORMAL_INSTALL)
+ @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ $(am__strip_dir) \
+ d2=$$d$$p; \
+ if test -d "$$d2"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+ echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+ else \
+ list2="$$list2 $$d2"; \
+ fi; \
+ done; \
+ test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+ done; }
install-info: install-info-recursive
-install-info-am:
-
-install-man:
+install-info-am: $(INFO_DEPS)
+ @$(NORMAL_INSTALL)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
+ fi; \
+ for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ esac; \
+ if test -f $$file; then d=.; else d=$(srcdir); fi; \
+ file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
+ for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
+ $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
+ if test -f $$ifile; then \
+ echo "$$ifile"; \
+ else : ; fi; \
+ done; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
+ @$(POST_INSTALL)
+ @if $(am__can_run_installinfo); then \
+ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
+ install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
+ done; \
+ else : ; fi
+install-man: install-man1
install-pdf: install-pdf-recursive
-install-pdf-am:
-
+install-pdf-am: $(PDFS)
+ @$(NORMAL_INSTALL)
+ @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-recursive
-install-ps-am:
-
+install-ps-am: $(PSS)
+ @$(NORMAL_INSTALL)
+ @list='$(PSS)'; test -n "$(psdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am: installcheck-local
maintainer-clean: maintainer-clean-recursive
@@ -1392,44 +1766,52 @@ maintainer-clean: maintainer-clean-recursive
-rm -rf $(top_srcdir)/autom4te.cache
-rm -rf ./$(DEPDIR) testsuite/$(DEPDIR)
-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
+maintainer-clean-am: distclean-am maintainer-clean-aminfo \
+ maintainer-clean-generic
mostlyclean: mostlyclean-recursive
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool mostlyclean-local
+mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool mostlyclean-local
pdf: pdf-recursive
-pdf-am:
+pdf-am: $(PDFS)
ps: ps-recursive
-ps-am:
+ps-am: $(PSS)
+
+uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
+ uninstall-dvi-am uninstall-html-am uninstall-info-am \
+ uninstall-man uninstall-pdf-am uninstall-ps-am
-uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS
+uninstall-man: uninstall-man1
.MAKE: $(am__recursive_targets) all check check-am install install-am \
install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
- am--refresh check check-DEJAGNU check-am clean \
+ am--refresh check check-DEJAGNU check-am clean clean-aminfo \
clean-binPROGRAMS clean-cscope clean-generic clean-libtool \
clean-noinstPROGRAMS cscope cscopelist-am ctags ctags-am \
- distclean distclean-DEJAGNU distclean-compile \
+ dist-info distclean distclean-DEJAGNU distclean-compile \
distclean-generic distclean-hdr distclean-libtool \
- distclean-tags dvi dvi-am html html-am info info-am install \
- install-am install-binPROGRAMS install-binSCRIPTS install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-exec-local install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installcheck-local \
- installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
- pdf-am ps ps-am tags tags-am uninstall uninstall-am \
- uninstall-binPROGRAMS uninstall-binSCRIPTS
+ distclean-tags dvi dvi-am html html-am html-local info info-am \
+ info-local install install-am install-binPROGRAMS \
+ install-binSCRIPTS install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-exec-local \
+ install-html install-html-am install-info install-info-am \
+ install-man install-man1 install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installcheck-local installdirs installdirs-am maintainer-clean \
+ maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
+ mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am tags \
+ tags-am uninstall uninstall-am uninstall-binPROGRAMS \
+ uninstall-binSCRIPTS uninstall-dvi-am uninstall-html-am \
+ uninstall-info-am uninstall-man uninstall-man1 \
+ uninstall-pdf-am uninstall-ps-am
.PRECIOUS: Makefile
@@ -1630,6 +2012,132 @@ install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
fi; \
done
+# Man page generation from texinfo
+doc/addr2line.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
+ $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f addr2line.pod
+
+doc/ar.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
+ $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f ar.pod
+
+doc/dlltool.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
+ $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f dlltool.pod
+
+doc/nm.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
+ $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f nm.pod
+
+doc/objcopy.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
+ $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f objcopy.pod
+
+doc/objdump.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
+ $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f objdump.pod
+
+doc/ranlib.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
+ $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f ranlib.pod
+
+doc/readelf.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
+ $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f readelf.pod
+
+doc/size.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
+ $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f size.pod
+
+doc/strings.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
+ $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f strings.pod
+
+doc/strip.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
+ $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f strip.pod
+
+doc/elfedit.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
+ $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f elfedit.pod
+
+doc/windres.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
+ $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f windres.pod
+
+doc/windmc.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
+ $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f windmc.pod
+
+doc/cxxfilt.man: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
+ $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
+
+doc/$(DEMANGLER_NAME).1: doc/cxxfilt.man Makefile
+ $(AM_V_GEN)if test -f doc/cxxfilt.man; then \
+ man=doc/cxxfilt.man; \
+ else \
+ man=$(srcdir)/doc/cxxfilt.man; \
+ fi; \
+ sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
+ -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
+ > doc/$(DEMANGLER_NAME).1
+
+html-local: doc/binutils/index.html
+binutils/index.html: doc/binutils.texi $(binutils_TEXINFOS)
+ $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
+ --split=node -I$(srcdir) $(srcdir)/doc/binutils.texi
+
+# Maintenance
+
+# We need it for the taz target in ../Makefile.in.
+info-local: $(MANS)
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/binutils/configure.ac b/binutils/configure.ac
index b0677ba5f20e..62696ff2a225 100644
--- a/binutils/configure.ac
+++ b/binutils/configure.ac
@@ -535,7 +535,7 @@ AC_SUBST(docdir)
AC_SUBST(htmldir)
AC_SUBST(pdfdir)
-AC_CONFIG_FILES(Makefile doc/Makefile po/Makefile.in:po/Make-in)
+AC_CONFIG_FILES(Makefile po/Makefile.in:po/Make-in)
AC_OUTPUT
GNU_MAKE_JOBSERVER
diff --git a/binutils/doc/Makefile.in b/binutils/doc/Makefile.in
deleted file mode 100644
index d42cdd87929b..000000000000
--- a/binutils/doc/Makefile.in
+++ /dev/null
@@ -1,1045 +0,0 @@
-# Makefile.in generated by automake 1.15.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2017 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright (C) 2012-2021 Free Software Foundation, Inc.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; see the file COPYING3. If not see
-# <http://www.gnu.org/licenses/>.
-#
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-target_triplet = @target@
-subdir = doc
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
- $(top_srcdir)/../bfd/warning.m4 \
- $(top_srcdir)/../config/depstand.m4 \
- $(top_srcdir)/../config/enable.m4 \
- $(top_srcdir)/../config/gettext-sister.m4 \
- $(top_srcdir)/../config/iconv.m4 \
- $(top_srcdir)/../config/jobserver.m4 \
- $(top_srcdir)/../config/largefile.m4 \
- $(top_srcdir)/../config/lcmessage.m4 \
- $(top_srcdir)/../config/lead-dot.m4 \
- $(top_srcdir)/../config/lib-ld.m4 \
- $(top_srcdir)/../config/lib-link.m4 \
- $(top_srcdir)/../config/lib-prefix.m4 \
- $(top_srcdir)/../config/nls.m4 \
- $(top_srcdir)/../config/override.m4 \
- $(top_srcdir)/../config/pkg.m4 \
- $(top_srcdir)/../config/plugins.m4 \
- $(top_srcdir)/../config/po.m4 \
- $(top_srcdir)/../config/progtest.m4 \
- $(top_srcdir)/../config/zlib.m4 $(top_srcdir)/../libtool.m4 \
- $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
- $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
- $(top_srcdir)/../bfd/version.m4 \
- $(top_srcdir)/../config/debuginfod.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
-am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
-am__v_DVIPS_0 = @echo " DVIPS " $@;
-am__v_DVIPS_1 =
-AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
-am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
-am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
-am__v_MAKEINFO_1 =
-AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
-am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
-am__v_INFOHTML_0 = @echo " INFOHTML" $@;
-am__v_INFOHTML_1 =
-AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
-am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
-am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
-am__v_TEXI2DVI_1 =
-AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
-am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
-am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
-am__v_TEXI2PDF_1 =
-AM_V_texinfo = $(am__v_texinfo_@AM_V@)
-am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
-am__v_texinfo_0 = -q
-am__v_texinfo_1 =
-AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
-am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
-am__v_texidevnull_0 = > /dev/null
-am__v_texidevnull_1 =
-INFO_DEPS = binutils.info
-am__TEXINFO_TEX_DIR = $(srcdir)
-DVIS = binutils.dvi
-PDFS = binutils.pdf
-PSS = binutils.ps
-HTMLS = binutils.html
-TEXINFOS = binutils.texi
-TEXI2PDF = $(TEXI2DVI) --pdf --batch
-MAKEINFOHTML = $(MAKEINFO) --html
-AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
-DVIPS = dvips
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/../mkinstalldirs
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_DLLTOOL = @BUILD_DLLTOOL@
-BUILD_DLLWRAP = @BUILD_DLLWRAP@
-BUILD_INSTALL_MISC = @BUILD_INSTALL_MISC@
-BUILD_MISC = @BUILD_MISC@
-BUILD_SRCONV = @BUILD_SRCONV@
-BUILD_WINDMC = @BUILD_WINDMC@
-BUILD_WINDRES = @BUILD_WINDRES@
-CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_FOR_BUILD = @CC_FOR_BUILD@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEBUGINFOD_CFLAGS = @DEBUGINFOD_CFLAGS@
-DEBUGINFOD_LIBS = @DEBUGINFOD_LIBS@
-DEFS = @DEFS@
-DEMANGLER_NAME = @DEMANGLER_NAME@
-DEPDIR = @DEPDIR@
-DLLTOOL_DEFS = @DLLTOOL_DEFS@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EMULATION = @EMULATION@
-EMULATION_VECTOR = @EMULATION_VECTOR@
-EXEEXT = @EXEEXT@
-EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
-FGREP = @FGREP@
-GENCAT = @GENCAT@
-GMSGFMT = @GMSGFMT@
-GREP = @GREP@
-HDEFINES = @HDEFINES@
-INCINTL = @INCINTL@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-LARGEFILE_CPPFLAGS = @LARGEFILE_CPPFLAGS@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBINTL_DEP = @LIBINTL_DEP@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NO_WERROR = @NO_WERROR@
-OBJDUMP = @OBJDUMP@
-OBJDUMP_DEFS = @OBJDUMP_DEFS@
-OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-WARN_CFLAGS = @WARN_CFLAGS@
-WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
-WARN_WRITE_STRINGS = @WARN_WRITE_STRINGS@
-XGETTEXT = @XGETTEXT@
-YACC = @YACC@
-YFLAGS = @YFLAGS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target = @target@
-target_alias = @target_alias@
-target_cpu = @target_cpu@
-target_os = @target_os@
-target_vendor = @target_vendor@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-zlibdir = @zlibdir@
-zlibinc = @zlibinc@
-AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex foreign
-
-# What version of the manual you want; "all" includes everything
-CONFIG = all
-
-# Options to extract the man page from as.texinfo
-MANCONF = -Dman
-TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
-POD2MAN = pod2man --center="GNU Development Tools" \
- --release="binutils-$(VERSION)" --section=1
-
-
-# List of man pages generated from binutils.texi
-man_MANS = \
- addr2line.1 \
- ar.1 \
- dlltool.1 \
- nm.1 \
- objcopy.1 \
- objdump.1 \
- ranlib.1 \
- readelf.1 \
- size.1 \
- strings.1 \
- strip.1 \
- elfedit.1 \
- windres.1 \
- windmc.1 \
- $(DEMANGLER_NAME).1
-
-info_TEXINFOS = binutils.texi
-binutils_TEXI = $(srcdir)/binutils.texi
-AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
- -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc \
- --no-split
-
-TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
- -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
-
-MAINTAINERCLEANFILES = $(man_MANS) binutils.info cxxfilt.man
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .dvi .ps
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign doc/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-binutils.info: binutils.texi
- $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
- rm -rf $$backupdir && mkdir $$backupdir && \
- if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
- for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
- if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
- done; \
- else :; fi && \
- if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
- then \
- rc=0; \
- else \
- rc=$$?; \
- $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
- fi; \
- rm -rf $$backupdir; exit $$rc
-
-binutils.dvi: binutils.texi
- $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
- `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
-
-binutils.pdf: binutils.texi
- $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
- `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
-
-binutils.html: binutils.texi
- $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
- $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $(@:.html=.htp) `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
- then \
- rm -rf $@ && mv $(@:.html=.htp) $@; \
- else \
- rm -rf $(@:.html=.htp); exit 1; \
- fi
-.dvi.ps:
- $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- $(DVIPS) $(AM_V_texinfo) -o $@ $<
-
-uninstall-dvi-am:
- @$(NORMAL_UNINSTALL)
- @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
- rm -f "$(DESTDIR)$(dvidir)/$$f"; \
- done
-
-uninstall-html-am:
- @$(NORMAL_UNINSTALL)
- @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
- rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
- done
-
-uninstall-info-am:
- @$(PRE_UNINSTALL)
- @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
- if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
- then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
- done; \
- else :; fi
- @$(NORMAL_UNINSTALL)
- @list='$(INFO_DEPS)'; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
- (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
- echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
- rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
- else :; fi); \
- done
-
-uninstall-pdf-am:
- @$(NORMAL_UNINSTALL)
- @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
- rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
- done
-
-uninstall-ps-am:
- @$(NORMAL_UNINSTALL)
- @list='$(PSS)'; test -n "$(psdir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
- rm -f "$(DESTDIR)$(psdir)/$$f"; \
- done
-
-dist-info: $(INFO_DEPS)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(INFO_DEPS)'; \
- for base in $$list; do \
- case $$base in \
- $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$base; then d=.; else d=$(srcdir); fi; \
- base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
- for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
- if test -f $$file; then \
- relfile=`expr "$$file" : "$$d/\(.*\)"`; \
- test -f "$(distdir)/$$relfile" || \
- cp -p $$file "$(distdir)/$$relfile"; \
- else :; fi; \
- done; \
- done
-
-mostlyclean-aminfo:
- -rm -rf binutils.t2d binutils.t2p
-
-clean-aminfo:
- -test -z "binutils.dvi binutils.pdf binutils.ps binutils.html" \
- || rm -rf binutils.dvi binutils.pdf binutils.ps binutils.html
-
-maintainer-clean-aminfo:
- @list='$(INFO_DEPS)'; for i in $$list; do \
- i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
- echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
- rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
- done
-install-man1: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man1dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.1[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" distdir="$(distdir)" \
- dist-info
-check-am: all-am
-check: check-am
-all-am: Makefile $(INFO_DEPS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am: $(DVIS)
-
-html: html-am
-
-html-am: $(HTMLS) html-local
-
-info: info-am
-
-info-am: $(INFO_DEPS) info-local
-
-install-data-am: install-info-am install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am: $(DVIS)
- @$(NORMAL_INSTALL)
- @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
- done
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
- @$(NORMAL_INSTALL)
- @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- d2=$$d$$p; \
- if test -d "$$d2"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
- $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
- echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
- else \
- list2="$$list2 $$d2"; \
- fi; \
- done; \
- test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
- done; }
-install-info: install-info-am
-
-install-info-am: $(INFO_DEPS)
- @$(NORMAL_INSTALL)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
- fi; \
- for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file; then d=.; else d=$(srcdir); fi; \
- file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
- for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
- $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
- if test -f $$ifile; then \
- echo "$$ifile"; \
- else : ; fi; \
- done; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
- @$(POST_INSTALL)
- @if $(am__can_run_installinfo); then \
- list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
- install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
- done; \
- else : ; fi
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am: $(PDFS)
- @$(NORMAL_INSTALL)
- @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
-install-ps: install-ps-am
-
-install-ps-am: $(PSS)
- @$(NORMAL_INSTALL)
- @list='$(PSS)'; test -n "$(psdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-aminfo \
- maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am: $(PDFS)
-
-ps: ps-am
-
-ps-am: $(PSS)
-
-uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
- uninstall-man uninstall-pdf-am uninstall-ps-am
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
- clean-libtool cscopelist-am ctags-am dist-info distclean \
- distclean-generic distclean-libtool distdir dvi dvi-am html \
- html-am html-local info info-am info-local install install-am \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-man1 \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-aminfo \
- maintainer-clean-generic mostlyclean mostlyclean-aminfo \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags-am uninstall uninstall-am uninstall-dvi-am \
- uninstall-html-am uninstall-info-am uninstall-man \
- uninstall-man1 uninstall-pdf-am uninstall-ps-am
-
-.PRECIOUS: Makefile
-
-
-# Man page generation from texinfo
-addr2line.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
- $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f addr2line.pod
-
-ar.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
- $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f ar.pod
-
-dlltool.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
- $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f dlltool.pod
-
-nm.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
- $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f nm.pod
-
-objcopy.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
- $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f objcopy.pod
-
-objdump.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
- $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f objdump.pod
-
-ranlib.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
- $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f ranlib.pod
-
-readelf.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
- $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f readelf.pod
-
-size.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
- $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f size.pod
-
-strings.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
- $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f strings.pod
-
-strip.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
- $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f strip.pod
-
-elfedit.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
- $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f elfedit.pod
-
-windres.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
- $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f windres.pod
-
-windmc.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
- $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f windmc.pod
-
-cxxfilt.man: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
- $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
-
-$(DEMANGLER_NAME).1: cxxfilt.man Makefile
- $(AM_V_GEN)if test -f cxxfilt.man; then \
- man=cxxfilt.man; \
- else \
- man=$(srcdir)/cxxfilt.man; \
- fi; \
- sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
- -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
- > $(DEMANGLER_NAME).1
-
-html-local: binutils/index.html
-binutils/index.html: binutils.texi $(binutils_TEXINFOS)
- $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
- --split=node -I$(srcdir) $(srcdir)/binutils.texi
-
-# Maintenance
-
-# We need it for the taz target in ../../Makefile.in.
-info-local: $(MANS)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/binutils/doc/Makefile.am b/binutils/doc/local.mk
similarity index 77%
rename from binutils/doc/Makefile.am
rename to binutils/doc/local.mk
index 90b238ddf8d9..687b3f65e6cb 100644
--- a/binutils/doc/Makefile.am
+++ b/binutils/doc/local.mk
@@ -6,19 +6,17 @@
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING3. If not see
# <http://www.gnu.org/licenses/>.
#
-AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex foreign
-
# What version of the manual you want; "all" includes everything
CONFIG=all
@@ -32,155 +30,155 @@ POD2MAN = pod2man --center="GNU Development Tools" \
# List of man pages generated from binutils.texi
man_MANS = \
- addr2line.1 \
- ar.1 \
- dlltool.1 \
- nm.1 \
- objcopy.1 \
- objdump.1 \
- ranlib.1 \
- readelf.1 \
- size.1 \
- strings.1 \
- strip.1 \
- elfedit.1 \
- windres.1 \
- windmc.1 \
- $(DEMANGLER_NAME).1
-
-info_TEXINFOS = binutils.texi
-binutils_TEXI = $(srcdir)/binutils.texi
-
-AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
- -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc \
+ %D%/addr2line.1 \
+ %D%/ar.1 \
+ %D%/dlltool.1 \
+ %D%/nm.1 \
+ %D%/objcopy.1 \
+ %D%/objdump.1 \
+ %D%/ranlib.1 \
+ %D%/readelf.1 \
+ %D%/size.1 \
+ %D%/strings.1 \
+ %D%/strip.1 \
+ %D%/elfedit.1 \
+ %D%/windres.1 \
+ %D%/windmc.1 \
+ %D%/$(DEMANGLER_NAME).1
+
+info_TEXINFOS = %D%/binutils.texi
+binutils_TEXI = $(srcdir)/%D%/binutils.texi
+
+AM_MAKEINFOFLAGS = -I "$(srcdir)/%D%" -I "$(top_srcdir)/../libiberty" \
+ -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc \
--no-split
-TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
- -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
+TEXI2DVI = texi2dvi -I "$(srcdir)/%D%" -I "$(top_srcdir)/../libiberty" \
+ -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
# Man page generation from texinfo
-addr2line.1: $(binutils_TEXI)
+%D%/addr2line.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
$(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f addr2line.pod
-ar.1: $(binutils_TEXI)
+%D%/ar.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
$(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f ar.pod
-dlltool.1: $(binutils_TEXI)
+%D%/dlltool.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
$(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f dlltool.pod
-nm.1: $(binutils_TEXI)
+%D%/nm.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
$(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f nm.pod
-objcopy.1: $(binutils_TEXI)
+%D%/objcopy.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
$(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f objcopy.pod
-objdump.1: $(binutils_TEXI)
+%D%/objdump.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
$(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f objdump.pod
-ranlib.1: $(binutils_TEXI)
+%D%/ranlib.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
$(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f ranlib.pod
-readelf.1: $(binutils_TEXI)
+%D%/readelf.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
$(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f readelf.pod
-size.1: $(binutils_TEXI)
+%D%/size.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
$(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f size.pod
-strings.1: $(binutils_TEXI)
+%D%/strings.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
$(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f strings.pod
-strip.1: $(binutils_TEXI)
+%D%/strip.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
$(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f strip.pod
-elfedit.1: $(binutils_TEXI)
+%D%/elfedit.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
$(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f elfedit.pod
-windres.1: $(binutils_TEXI)
+%D%/windres.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
$(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f windres.pod
-windmc.1: $(binutils_TEXI)
+%D%/windmc.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
$(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f windmc.pod
-cxxfilt.man: $(binutils_TEXI)
+%D%/cxxfilt.man: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
$(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f $(DEMANGLER_NAME).pod
-MAINTAINERCLEANFILES = $(man_MANS) binutils.info cxxfilt.man
+MAINTAINERCLEANFILES += $(man_MANS) %D%/binutils.info %D%/cxxfilt.man
-$(DEMANGLER_NAME).1: cxxfilt.man Makefile
- $(AM_V_GEN)if test -f cxxfilt.man; then \
- man=cxxfilt.man; \
+%D%/$(DEMANGLER_NAME).1: %D%/cxxfilt.man Makefile
+ $(AM_V_GEN)if test -f %D%/cxxfilt.man; then \
+ man=%D%/cxxfilt.man; \
else \
- man=$(srcdir)/cxxfilt.man; \
+ man=$(srcdir)/%D%/cxxfilt.man; \
fi; \
sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
-e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
- > $(DEMANGLER_NAME).1
+ > %D%/$(DEMANGLER_NAME).1
-html-local: binutils/index.html
-binutils/index.html: binutils.texi $(binutils_TEXINFOS)
+html-local: %D%/binutils/index.html
+binutils/index.html: %D%/binutils.texi $(binutils_TEXINFOS)
$(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
- --split=node -I$(srcdir) $(srcdir)/binutils.texi
+ --split=node -I$(srcdir) $(srcdir)/%D%/binutils.texi
# Maintenance
-# We need it for the taz target in ../../Makefile.in.
+# We need it for the taz target in ../Makefile.in.
info-local: $(MANS)
--
2.33.0
More information about the Binutils
mailing list