[PUSHED] Merge changes from GCC for the config/ directory
Andrew Burgess
andrew.burgess@embecosm.com
Wed Feb 19 18:00:00 GMT 2020
I rebased this patch, and updated it to include an extra commit that
was addded in GCC, and then went ahead and pushed this as an "obvious"
fix - all the changes here are either copied from GCC or the result of
file regeneration, so I hope this should be OK.
--
GCC's config/ChangeLog since the last time this merge was done
(in the binutils-gdb commit 0b4d000cc4e8e77c823) is included at the
end of this commit message.
It is worth noting that the binutils-gdb commit 301a9420d947da1458
added the file config/debuginfod.m4 which is not present in GCC's
config/ directory. This file is preserved, unmodified, after this
commit.
In order to regenerate all of the configure files, I configured with
--enable-maintainer-mode, and built the 'all' target. I then did the
same thing on a source tree without this patch, and only committed
those files that changed when this patch was added.
GCC's config/ChangeLog entries:
2020-02-12 Sandra Loosemore <sandra@codesourcery.com>
PR libstdc++/79193
PR libstdc++/88999
* no-executables.m4: Use a non-empty program to test for linker
support.
2020-02-01 Andrew Burgess <andrew.burgess@embecosm.com>
* lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Update shell syntax.
2020-01-27 Andrew Burgess <andrew.burgess@embecosm.com>
* lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Add new
--with-libXXX-type=... option. Use this to guide the selection of
either a shared library or a static library.
2020-01-24 Maciej W. Rozycki <macro@wdc.com>
* toolexeclibdir.m4: New file.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
* futex.m4: Handle *-uclinux*.
* tls.m4 (GCC_CHECK_TLS): Likewise.
2019-09-06 Florian Weimer <fweimer@redhat.com>
* futex.m4 (GCC_LINUX_FUTEX): Include <unistd.h> for the syscall
function.
2019-07-08 Richard Sandiford <richard.sandiford@arm.com>
* bootstrap-Og.mk: New file.
2019-06-25 Kwok Cheung Yeung <kcy@codesourcery.com>
Andrew Stubbs <ams@codesourcery.com>
* gthr.m4 (GCC_AC_THREAD_HEADER): Add case for gcn.
2019-05-30 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* ax_count_cpus.m4: New file.
2019-05-02 Richard Biener <rguenther@suse.de>
PR bootstrap/85574
* bootstrap-lto.mk (extra-compare): Set to gcc/lto1$(exeext).
2019-04-16 Martin Liska <mliska@suse.cz>
* bootstrap-lto-lean.mk: Filter out -flto in STAGEtrain_CFLAGS.
2019-04-09 Martin Liska <mliska@suse.cz>
* bootstrap-lto-lean.mk: New file.
2019-03-02 Johannes Pfau <johannespfau@gmail.com>
* mh-mingw: Also set __USE_MINGW_ACCESS flag for C++ code.
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
config/ChangeLog:
* ax_count_cpus.m4: New file, backported from GCC.
* bootstrap-Og.mk: New file, backported from GCC.
* bootstrap-lto-lean.mk: New file, backported from GCC.
* bootstrap-lto.mk: Changes backported from GCC.
* futex.m4: Changes backported from GCC.
* gthr.m4: Changes backported from GCC.
* lib-link.m4: Changes backported from GCC.
* mh-mingw: Changes backported from GCC.
* no-executables.m4: Changes backported from GCC.
* tls.m4: Changes backported from GCC.
* toolexeclibdir.m4: New file, backported from GCC.
binutils/ChangeLog:
* configure: Regenerate.
gdb/ChangeLog:
* configure: Regenerate.
gdbserver/ChangeLog:
* configure: Regenerate.
gdbsupport/ChangeLog:
* configure: Regenerate.
intl/ChangeLog:
* configure: Regenerate.
libiberty/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog.bin-gdb:
* configure: Regenerate.
---
binutils/ChangeLog | 4 +
binutils/configure | 33 +++++--
config/ChangeLog | 14 +++
config/ax_count_cpus.m4 | 101 +++++++++++++++++++++
config/bootstrap-Og.mk | 1 +
config/bootstrap-lto-lean.mk | 17 ++++
config/bootstrap-lto.mk | 1 +
config/futex.m4 | 4 +-
config/gthr.m4 | 1 +
config/lib-link.m4 | 22 +++--
config/mh-mingw | 5 ++
config/no-executables.m4 | 4 +-
config/tls.m4 | 2 +-
config/toolexeclibdir.m4 | 31 +++++++
gdb/ChangeLog | 4 +
gdb/configure | 203 ++++++++++++++++++++++++++++++++++---------
gdbserver/ChangeLog | 4 +
gdbserver/configure | 29 +++++--
gdbsupport/ChangeLog | 4 +
gdbsupport/configure | 29 +++++--
intl/ChangeLog | 4 +
intl/configure | 58 ++++++++++---
libiberty/ChangeLog | 4 +
libiberty/configure | 4 +-
zlib/ChangeLog.bin-gdb | 4 +
zlib/configure | 4 +-
26 files changed, 504 insertions(+), 87 deletions(-)
create mode 100644 config/ax_count_cpus.m4
create mode 100644 config/bootstrap-Og.mk
create mode 100644 config/bootstrap-lto-lean.mk
create mode 100644 config/toolexeclibdir.m4
diff --git a/binutils/configure b/binutils/configure
index e3eed4551f6..782fffac6ff 100755
--- a/binutils/configure
+++ b/binutils/configure
@@ -822,6 +822,7 @@ enable_maintainer_mode
with_system_zlib
enable_rpath
with_libiconv_prefix
+with_libiconv_type
'
ac_precious_vars='build_alias
host_alias
@@ -1491,6 +1492,7 @@ Optional Packages:
--with-gnu-ld assume the C compiler uses GNU ld default=no
--with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
--without-libiconv-prefix don't search for libiconv in includedir and libdir
+ --with-libiconv-type=TYPE type of library to search for (auto/static/shared)
Some influential environment variables:
CC C compiler command
@@ -11527,7 +11529,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11530 "configure"
+#line 11532 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -11633,7 +11635,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11636 "configure"
+#line 11638 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -14479,6 +14481,16 @@ if test "${with_libiconv_prefix+set}" = set; then :
fi
+
+# Check whether --with-libiconv-type was given.
+if test "${with_libiconv_type+set}" = set; then :
+ withval=$with_libiconv_type; with_libiconv_type=$withval
+else
+ with_libiconv_type=auto
+fi
+
+ lib_type=`eval echo \$with_libiconv_type`
+
LIBICONV=
LTLIBICONV=
INCICONV=
@@ -14516,13 +14528,13 @@ fi
found_so=
found_a=
if test $use_additional = yes; then
- if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$additional_libdir"
found_so="$additional_libdir/lib$name.$shlibext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$additional_libdir/lib$name.$libext"; then
found_dir="$additional_libdir"
found_a="$additional_libdir/lib$name.$libext"
@@ -14546,13 +14558,13 @@ fi
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$dir"
found_so="$dir/lib$name.$shlibext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$dir/lib$name.$libext"; then
found_dir="$dir"
found_a="$dir/lib$name.$libext"
@@ -14780,8 +14792,13 @@ fi
done
fi
else
- LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+ if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l:lib$name.$libext"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l:lib$name.$libext"
+ fi
fi
fi
fi
diff --git a/config/ax_count_cpus.m4 b/config/ax_count_cpus.m4
new file mode 100644
index 00000000000..5db89255343
--- /dev/null
+++ b/config/ax_count_cpus.m4
@@ -0,0 +1,101 @@
+# ===========================================================================
+# https://www.gnu.org/software/autoconf-archive/ax_count_cpus.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_COUNT_CPUS([ACTION-IF-DETECTED],[ACTION-IF-NOT-DETECTED])
+#
+# DESCRIPTION
+#
+# Attempt to count the number of logical processor cores (including
+# virtual and HT cores) currently available to use on the machine and
+# place detected value in CPU_COUNT variable.
+#
+# On successful detection, ACTION-IF-DETECTED is executed if present. If
+# the detection fails, then ACTION-IF-NOT-DETECTED is triggered. The
+# default ACTION-IF-NOT-DETECTED is to set CPU_COUNT to 1.
+#
+# LICENSE
+#
+# Copyright (c) 2014,2016 Karlson2k (Evgeny Grin) <k2k@narod.ru>
+# Copyright (c) 2012 Brian Aker <brian@tangent.org>
+# Copyright (c) 2008 Michael Paul Bailey <jinxidoru@byu.net>
+# Copyright (c) 2008 Christophe Tournayre <turn3r@users.sourceforge.net>
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice
+# and this notice are preserved. This file is offered as-is, without any
+# warranty.
+
+#serial 22
+
+ AC_DEFUN([AX_COUNT_CPUS],[dnl
+ AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_PROG_EGREP])dnl
+ AC_MSG_CHECKING([the number of available CPUs])
+ CPU_COUNT="0"
+
+ # Try generic methods
+
+ # 'getconf' is POSIX utility, but '_NPROCESSORS_ONLN' and
+ # 'NPROCESSORS_ONLN' are platform-specific
+ command -v getconf >/dev/null 2>&1 && \
+ CPU_COUNT=`getconf _NPROCESSORS_ONLN 2>/dev/null || getconf NPROCESSORS_ONLN 2>/dev/null` || CPU_COUNT="0"
+ AS_IF([[test "$CPU_COUNT" -gt "0" 2>/dev/null || ! command -v nproc >/dev/null 2>&1]],[[: # empty]],[dnl
+ # 'nproc' is part of GNU Coreutils and is widely available
+ CPU_COUNT=`OMP_NUM_THREADS='' nproc 2>/dev/null` || CPU_COUNT=`nproc 2>/dev/null` || CPU_COUNT="0"
+ ])dnl
+
+ AS_IF([[test "$CPU_COUNT" -gt "0" 2>/dev/null]],[[: # empty]],[dnl
+ # Try platform-specific preferred methods
+ AS_CASE([[$host_os]],dnl
+ [[*linux*]],[[CPU_COUNT=`lscpu -p 2>/dev/null | $EGREP -e '^@<:@0-9@:>@+,' -c` || CPU_COUNT="0"]],dnl
+ [[*darwin*]],[[CPU_COUNT=`sysctl -n hw.logicalcpu 2>/dev/null` || CPU_COUNT="0"]],dnl
+ [[freebsd*]],[[command -v sysctl >/dev/null 2>&1 && CPU_COUNT=`sysctl -n kern.smp.cpus 2>/dev/null` || CPU_COUNT="0"]],dnl
+ [[netbsd*]], [[command -v sysctl >/dev/null 2>&1 && CPU_COUNT=`sysctl -n hw.ncpuonline 2>/dev/null` || CPU_COUNT="0"]],dnl
+ [[solaris*]],[[command -v psrinfo >/dev/null 2>&1 && CPU_COUNT=`psrinfo 2>/dev/null | $EGREP -e '^@<:@0-9@:>@.*on-line' -c 2>/dev/null` || CPU_COUNT="0"]],dnl
+ [[mingw*]],[[CPU_COUNT=`ls -qpU1 /proc/registry/HKEY_LOCAL_MACHINE/HARDWARE/DESCRIPTION/System/CentralProcessor/ 2>/dev/null | $EGREP -e '^@<:@0-9@:>@+/' -c` || CPU_COUNT="0"]],dnl
+ [[msys*]],[[CPU_COUNT=`ls -qpU1 /proc/registry/HKEY_LOCAL_MACHINE/HARDWARE/DESCRIPTION/System/CentralProcessor/ 2>/dev/null | $EGREP -e '^@<:@0-9@:>@+/' -c` || CPU_COUNT="0"]],dnl
+ [[cygwin*]],[[CPU_COUNT=`ls -qpU1 /proc/registry/HKEY_LOCAL_MACHINE/HARDWARE/DESCRIPTION/System/CentralProcessor/ 2>/dev/null | $EGREP -e '^@<:@0-9@:>@+/' -c` || CPU_COUNT="0"]]dnl
+ )dnl
+ ])dnl
+
+ AS_IF([[test "$CPU_COUNT" -gt "0" 2>/dev/null || ! command -v sysctl >/dev/null 2>&1]],[[: # empty]],[dnl
+ # Try less preferred generic method
+ # 'hw.ncpu' exist on many platforms, but not on GNU/Linux
+ CPU_COUNT=`sysctl -n hw.ncpu 2>/dev/null` || CPU_COUNT="0"
+ ])dnl
+
+ AS_IF([[test "$CPU_COUNT" -gt "0" 2>/dev/null]],[[: # empty]],[dnl
+ # Try platform-specific fallback methods
+ # They can be less accurate and slower then preferred methods
+ AS_CASE([[$host_os]],dnl
+ [[*linux*]],[[CPU_COUNT=`$EGREP -e '^processor' -c /proc/cpuinfo 2>/dev/null` || CPU_COUNT="0"]],dnl
+ [[*darwin*]],[[CPU_COUNT=`system_profiler SPHardwareDataType 2>/dev/null | $EGREP -i -e 'number of cores:'|cut -d : -f 2 -s|tr -d ' '` || CPU_COUNT="0"]],dnl
+ [[freebsd*]],[[CPU_COUNT=`dmesg 2>/dev/null| $EGREP -e '^cpu@<:@0-9@:>@+: '|sort -u|$EGREP -e '^' -c` || CPU_COUNT="0"]],dnl
+ [[netbsd*]], [[CPU_COUNT=`command -v cpuctl >/dev/null 2>&1 && cpuctl list 2>/dev/null| $EGREP -e '^@<:@0-9@:>@+ .* online ' -c` || \
+ CPU_COUNT=`dmesg 2>/dev/null| $EGREP -e '^cpu@<:@0-9@:>@+ at'|sort -u|$EGREP -e '^' -c` || CPU_COUNT="0"]],dnl
+ [[solaris*]],[[command -v kstat >/dev/null 2>&1 && CPU_COUNT=`kstat -m cpu_info -s state -p 2>/dev/null | $EGREP -c -e 'on-line'` || \
+ CPU_COUNT=`kstat -m cpu_info 2>/dev/null | $EGREP -c -e 'module: cpu_info'` || CPU_COUNT="0"]],dnl
+ [[mingw*]],[AS_IF([[CPU_COUNT=`reg query 'HKLM\\Hardware\\Description\\System\\CentralProcessor' 2>/dev/null | $EGREP -e '\\\\@<:@0-9@:>@+$' -c`]],dnl
+ [[: # empty]],[[test "$NUMBER_OF_PROCESSORS" -gt "0" 2>/dev/null && CPU_COUNT="$NUMBER_OF_PROCESSORS"]])],dnl
+ [[msys*]],[[test "$NUMBER_OF_PROCESSORS" -gt "0" 2>/dev/null && CPU_COUNT="$NUMBER_OF_PROCESSORS"]],dnl
+ [[cygwin*]],[[test "$NUMBER_OF_PROCESSORS" -gt "0" 2>/dev/null && CPU_COUNT="$NUMBER_OF_PROCESSORS"]]dnl
+ )dnl
+ ])dnl
+
+ AS_IF([[test "x$CPU_COUNT" != "x0" && test "$CPU_COUNT" -gt 0 2>/dev/null]],[dnl
+ AC_MSG_RESULT([[$CPU_COUNT]])
+ m4_ifvaln([$1],[$1],)dnl
+ ],[dnl
+ m4_ifval([$2],[dnl
+ AS_UNSET([[CPU_COUNT]])
+ AC_MSG_RESULT([[unable to detect]])
+ $2
+ ], [dnl
+ CPU_COUNT="1"
+ AC_MSG_RESULT([[unable to detect (assuming 1)]])
+ ])dnl
+ ])dnl
+ ])dnl
diff --git a/config/bootstrap-Og.mk b/config/bootstrap-Og.mk
new file mode 100644
index 00000000000..9057afbe354
--- /dev/null
+++ b/config/bootstrap-Og.mk
@@ -0,0 +1 @@
+BOOT_CFLAGS := -Og $(filter-out -O%, $(BOOT_CFLAGS))
diff --git a/config/bootstrap-lto-lean.mk b/config/bootstrap-lto-lean.mk
new file mode 100644
index 00000000000..79cea50a4c6
--- /dev/null
+++ b/config/bootstrap-lto-lean.mk
@@ -0,0 +1,17 @@
+# This option enables LTO for stage4 and LTO for generators in stage3 with profiledbootstrap.
+# Otherwise, LTO is used in only stage3.
+
+STAGE3_CFLAGS += -flto=jobserver
+override STAGEtrain_CFLAGS := $(filter-out -flto=jobserver,$(STAGEtrain_CFLAGS))
+STAGEtrain_GENERATOR_CFLAGS += -flto=jobserver
+STAGEfeedback_CFLAGS += -flto=jobserver
+
+# assumes the host supports the linker plugin
+LTO_AR = $$r/$(HOST_SUBDIR)/prev-gcc/gcc-ar$(exeext) -B$$r/$(HOST_SUBDIR)/prev-gcc/
+LTO_RANLIB = $$r/$(HOST_SUBDIR)/prev-gcc/gcc-ranlib$(exeext) -B$$r/$(HOST_SUBDIR)/prev-gcc/
+
+LTO_EXPORTS = AR="$(LTO_AR)"; export AR; \
+ RANLIB="$(LTO_RANLIB)"; export RANLIB;
+LTO_FLAGS_TO_PASS = AR="$(LTO_AR)" RANLIB="$(LTO_RANLIB)"
+
+do-compare = /bin/true
diff --git a/config/bootstrap-lto.mk b/config/bootstrap-lto.mk
index 768b6337bd6..4de07e5b226 100644
--- a/config/bootstrap-lto.mk
+++ b/config/bootstrap-lto.mk
@@ -15,3 +15,4 @@ LTO_EXPORTS = AR="$(LTO_AR)"; export AR; \
LTO_FLAGS_TO_PASS = AR="$(LTO_AR)" RANLIB="$(LTO_RANLIB)"
do-compare = $(SHELL) $(srcdir)/contrib/compare-lto $$f1 $$f2
+extra-compare = gcc/lto1$(exeext)
diff --git a/config/futex.m4 b/config/futex.m4
index e95144dd16a..c21243854a9 100644
--- a/config/futex.m4
+++ b/config/futex.m4
@@ -9,7 +9,7 @@ AC_DEFUN([GCC_LINUX_FUTEX],[dnl
GCC_ENABLE(linux-futex,default, ,[use the Linux futex system call],
permit yes|no|default)
case "$target" in
- *-linux*)
+ *-linux* | *-uclinux*)
case "$enable_linux_futex" in
default)
# If headers don't have gettid/futex syscalls definition, then
@@ -22,6 +22,7 @@ case "$target" in
AC_LINK_IFELSE(
[AC_LANG_PROGRAM(
[#include <sys/syscall.h>
+ #include <unistd.h>
int lk;],
[syscall (SYS_gettid); syscall (SYS_futex, &lk, 0, 0, 0);])],
[save_LIBS="$LIBS"
@@ -48,6 +49,7 @@ If so, please configure with --disable-linux-futex])
AC_LINK_IFELSE(
[AC_LANG_PROGRAM(
[#include <sys/syscall.h>
+ #include <unistd.h>
int lk;],
[syscall (SYS_gettid); syscall (SYS_futex, &lk, 0, 0, 0);])],[],
[AC_MSG_ERROR([SYS_gettid and SYS_futex required for --enable-linux-futex])])
diff --git a/config/gthr.m4 b/config/gthr.m4
index 7b29f1f3327..4b937306ad0 100644
--- a/config/gthr.m4
+++ b/config/gthr.m4
@@ -13,6 +13,7 @@ AC_DEFUN([GCC_AC_THREAD_HEADER],
case $1 in
aix) thread_header=config/rs6000/gthr-aix.h ;;
dce) thread_header=config/pa/gthr-dce.h ;;
+ gcn) thread_header=config/gcn/gthr-gcn.h ;;
lynx) thread_header=config/gthr-lynx.h ;;
mipssde) thread_header=config/mips/gthr-mipssde.h ;;
posix) thread_header=gthr-posix.h ;;
diff --git a/config/lib-link.m4 b/config/lib-link.m4
index eeb200d266d..20e281fd323 100644
--- a/config/lib-link.m4
+++ b/config/lib-link.m4
@@ -150,6 +150,11 @@ AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
fi
fi
])
+ AC_LIB_ARG_WITH([lib$1-type],
+[ --with-lib$1-type=TYPE type of library to search for (auto/static/shared) ],
+ [ with_lib$1_type=$withval ], [ with_lib$1_type=auto ])
+ lib_type=`eval echo \$with_lib$1_type`
+
dnl Search the library and its dependencies in $additional_libdir and
dnl $LDFLAGS. Using breadth-first-seach.
LIB[]NAME=
@@ -195,13 +200,13 @@ AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
found_so=
found_a=
if test $use_additional = yes; then
- if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$additional_libdir"
found_so="$additional_libdir/lib$name.$shlibext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$additional_libdir/lib$name.$libext"; then
found_dir="$additional_libdir"
found_a="$additional_libdir/lib$name.$libext"
@@ -217,13 +222,13 @@ AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$dir"
found_so="$dir/lib$name.$shlibext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$dir/lib$name.$libext"; then
found_dir="$dir"
found_a="$dir/lib$name.$libext"
@@ -487,8 +492,13 @@ AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
dnl known to the linker and runtime loader. (All the system
dnl directories known to the linker should also be known to the
dnl runtime loader, otherwise the system is severely misconfigured.)
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
+ if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
+ else
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l:lib$name.$libext"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l:lib$name.$libext"
+ fi
fi
fi
fi
diff --git a/config/mh-mingw b/config/mh-mingw
index bc1d27477d0..a795096f038 100644
--- a/config/mh-mingw
+++ b/config/mh-mingw
@@ -2,6 +2,11 @@
# Vista (see PR33281 for details).
BOOT_CFLAGS += -D__USE_MINGW_ACCESS -Wno-pedantic-ms-format
CFLAGS += -D__USE_MINGW_ACCESS
+STAGE1_CXXFLAGS += -D__USE_MINGW_ACCESS
+STAGE2_CXXFLAGS += -D__USE_MINGW_ACCESS
+STAGE3_CXXFLAGS += -D__USE_MINGW_ACCESS
+STAGE4_CXXFLAGS += -D__USE_MINGW_ACCESS
+
# Increase stack limit to a figure based on the Linux default, with 4MB added
# as GCC turns out to need that much more to pass all the limits-* tests.
LDFLAGS += -Wl,--stack,12582912
diff --git a/config/no-executables.m4 b/config/no-executables.m4
index 90616245ef9..6842f84fba3 100644
--- a/config/no-executables.m4
+++ b/config/no-executables.m4
@@ -25,7 +25,9 @@ AC_BEFORE([$0], [_AC_COMPILER_EXEEXT])
AC_BEFORE([$0], [AC_LINK_IFELSE])
m4_define([_AC_COMPILER_EXEEXT],
-[AC_LANG_CONFTEST([AC_LANG_PROGRAM()])
+[AC_LANG_CONFTEST([AC_LANG_PROGRAM(
+ [#include <stdio.h>],
+ [printf ("hello world\n");])])
# FIXME: Cleanup?
AS_IF([AC_TRY_EVAL(ac_link)], [gcc_no_link=no], [gcc_no_link=yes])
if test x$gcc_no_link = xyes; then
diff --git a/config/tls.m4 b/config/tls.m4
index 1a5fc59c2b4..7532305b908 100644
--- a/config/tls.m4
+++ b/config/tls.m4
@@ -76,7 +76,7 @@ AC_DEFUN([GCC_CHECK_TLS], [
dnl Shared library options may depend on the host; this check
dnl is only known to be needed for GNU/Linux.
case $host in
- *-*-linux*)
+ *-*-linux* | -*-uclinuxfdpic*)
LDFLAGS="-shared -Wl,--no-undefined $LDFLAGS"
;;
esac
diff --git a/config/toolexeclibdir.m4 b/config/toolexeclibdir.m4
new file mode 100644
index 00000000000..5dd89786219
--- /dev/null
+++ b/config/toolexeclibdir.m4
@@ -0,0 +1,31 @@
+dnl toolexeclibdir override support.
+dnl Copyright (C) 2020 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3, or (at your option)
+dnl any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program; see the file COPYING3. If not see
+dnl <http://www.gnu.org/licenses/>.
+
+AC_DEFUN([GCC_WITH_TOOLEXECLIBDIR],
+[AC_ARG_WITH(toolexeclibdir,
+ [AS_HELP_STRING([--with-toolexeclibdir=DIR],
+ [install libraries built with a cross compiler within DIR])],
+ [dnl
+case ${with_toolexeclibdir} in
+ /)
+ ;;
+ */)
+ with_toolexeclibdir=`echo $with_toolexeclibdir | sed 's,/$,,'`
+ ;;
+esac],
+ [with_toolexeclibdir=no])
+])
diff --git a/gdb/configure b/gdb/configure
index 4f2d7f8f232..2f6ecb5c7a1 100755
--- a/gdb/configure
+++ b/gdb/configure
@@ -879,18 +879,22 @@ with_system_zlib
with_gnu_ld
enable_rpath
with_libiconv_prefix
+with_libiconv_type
with_iconv_bin
with_system_readline
with_jit_reader_dir
with_expat
with_libexpat_prefix
+with_libexpat_type
with_mpfr
with_libmpfr_prefix
+with_libmpfr_type
with_python
with_guile
enable_source_highlight
with_intel_pt
with_libipt_prefix
+with_libipt_type
with_included_regex
with_sysroot
with_system_gdbinit
@@ -901,14 +905,17 @@ enable_gdb_build_warnings
enable_ubsan
with_lzma
with_liblzma_prefix
+with_liblzma_type
with_tcl
with_tk
with_x
enable_sim
with_babeltrace
with_libbabeltrace_prefix
+with_libbabeltrace_type
with_xxhash
with_libxxhash_prefix
+with_libxxhash_type
enable_unit_tests
'
ac_precious_vars='build_alias
@@ -1603,6 +1610,7 @@ Optional Packages:
--with-gnu-ld assume the C compiler uses GNU ld default=no
--with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
--without-libiconv-prefix don't search for libiconv in includedir and libdir
+ --with-libiconv-type=TYPE type of library to search for (auto/static/shared)
--with-iconv-bin=PATH specify where to find the iconv program
--with-system-readline use installed readline library
--with-jit-reader-dir=PATH
@@ -1610,9 +1618,11 @@ Optional Packages:
--with-expat include expat support (auto/yes/no)
--with-libexpat-prefix[=DIR] search for libexpat in DIR/include and DIR/lib
--without-libexpat-prefix don't search for libexpat in includedir and libdir
+ --with-libexpat-type=TYPE type of library to search for (auto/static/shared)
--with-mpfr include MPFR support (auto/yes/no)
--with-libmpfr-prefix[=DIR] search for libmpfr in DIR/include and DIR/lib
--without-libmpfr-prefix don't search for libmpfr in includedir and libdir
+ --with-libmpfr-type=TYPE type of library to search for (auto/static/shared)
--with-python[=PYTHON] include python support
(auto/yes/no/<python-program>)
--with-guile[=GUILE] include guile support
@@ -1620,6 +1630,7 @@ Optional Packages:
--with-intel-pt include Intel Processor Trace support (auto/yes/no)
--with-libipt-prefix[=DIR] search for libipt in DIR/include and DIR/lib
--without-libipt-prefix don't search for libipt in includedir and libdir
+ --with-libipt-type=TYPE type of library to search for (auto/static/shared)
--without-included-regex
don't use included regex; this is the default on
systems with version 2 of the GNU C library (use
@@ -1633,15 +1644,18 @@ Optional Packages:
--with-lzma support lzma compression (auto/yes/no)
--with-liblzma-prefix[=DIR] search for liblzma in DIR/include and DIR/lib
--without-liblzma-prefix don't search for liblzma in includedir and libdir
+ --with-liblzma-type=TYPE type of library to search for (auto/static/shared)
--with-tcl directory containing tcl configuration (tclConfig.sh)
--with-tk directory containing tk configuration (tkConfig.sh)
--with-x use the X Window System
--with-babeltrace include babeltrace support (auto/yes/no)
--with-libbabeltrace-prefix[=DIR] search for libbabeltrace in DIR/include and DIR/lib
--without-libbabeltrace-prefix don't search for libbabeltrace in includedir and libdir
+ --with-libbabeltrace-type=TYPE type of library to search for (auto/static/shared)
--with-xxhash use libxxhash for hashing (faster) (auto/yes/no)
--with-libxxhash-prefix[=DIR] search for libxxhash in DIR/include and DIR/lib
--without-libxxhash-prefix don't search for libxxhash in includedir and libdir
+ --with-libxxhash-type=TYPE type of library to search for (auto/static/shared)
Some influential environment variables:
CC C compiler command
@@ -8204,6 +8218,16 @@ if test "${with_libiconv_prefix+set}" = set; then :
fi
+
+# Check whether --with-libiconv-type was given.
+if test "${with_libiconv_type+set}" = set; then :
+ withval=$with_libiconv_type; with_libiconv_type=$withval
+else
+ with_libiconv_type=auto
+fi
+
+ lib_type=`eval echo \$with_libiconv_type`
+
LIBICONV=
LTLIBICONV=
INCICONV=
@@ -8241,13 +8265,13 @@ fi
found_so=
found_a=
if test $use_additional = yes; then
- if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$additional_libdir"
found_so="$additional_libdir/lib$name.$shlibext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$additional_libdir/lib$name.$libext"; then
found_dir="$additional_libdir"
found_a="$additional_libdir/lib$name.$libext"
@@ -8271,13 +8295,13 @@ fi
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$dir"
found_so="$dir/lib$name.$shlibext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$dir/lib$name.$libext"; then
found_dir="$dir"
found_a="$dir/lib$name.$libext"
@@ -8505,8 +8529,13 @@ fi
done
fi
else
- LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+ if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l:lib$name.$libext"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l:lib$name.$libext"
+ fi
fi
fi
fi
@@ -9306,6 +9335,16 @@ if test "${with_libexpat_prefix+set}" = set; then :
fi
+
+# Check whether --with-libexpat-type was given.
+if test "${with_libexpat_type+set}" = set; then :
+ withval=$with_libexpat_type; with_libexpat_type=$withval
+else
+ with_libexpat_type=auto
+fi
+
+ lib_type=`eval echo \$with_libexpat_type`
+
LIBEXPAT=
LTLIBEXPAT=
INCEXPAT=
@@ -9343,13 +9382,13 @@ fi
found_so=
found_a=
if test $use_additional = yes; then
- if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$additional_libdir"
found_so="$additional_libdir/lib$name.$shlibext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$additional_libdir/lib$name.$libext"; then
found_dir="$additional_libdir"
found_a="$additional_libdir/lib$name.$libext"
@@ -9373,13 +9412,13 @@ fi
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$dir"
found_so="$dir/lib$name.$shlibext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$dir/lib$name.$libext"; then
found_dir="$dir"
found_a="$dir/lib$name.$libext"
@@ -9607,8 +9646,13 @@ fi
done
fi
else
- LIBEXPAT="${LIBEXPAT}${LIBEXPAT:+ }-l$name"
- LTLIBEXPAT="${LTLIBEXPAT}${LTLIBEXPAT:+ }-l$name"
+ if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
+ LIBEXPAT="${LIBEXPAT}${LIBEXPAT:+ }-l$name"
+ LTLIBEXPAT="${LTLIBEXPAT}${LTLIBEXPAT:+ }-l$name"
+ else
+ LIBEXPAT="${LIBEXPAT}${LIBEXPAT:+ }-l:lib$name.$libext"
+ LTLIBEXPAT="${LTLIBEXPAT}${LTLIBEXPAT:+ }-l:lib$name.$libext"
+ fi
fi
fi
fi
@@ -9811,6 +9855,16 @@ if test "${with_libmpfr_prefix+set}" = set; then :
fi
+
+# Check whether --with-libmpfr-type was given.
+if test "${with_libmpfr_type+set}" = set; then :
+ withval=$with_libmpfr_type; with_libmpfr_type=$withval
+else
+ with_libmpfr_type=auto
+fi
+
+ lib_type=`eval echo \$with_libmpfr_type`
+
LIBMPFR=
LTLIBMPFR=
INCMPFR=
@@ -9848,13 +9902,13 @@ fi
found_so=
found_a=
if test $use_additional = yes; then
- if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$additional_libdir"
found_so="$additional_libdir/lib$name.$shlibext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$additional_libdir/lib$name.$libext"; then
found_dir="$additional_libdir"
found_a="$additional_libdir/lib$name.$libext"
@@ -9878,13 +9932,13 @@ fi
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$dir"
found_so="$dir/lib$name.$shlibext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$dir/lib$name.$libext"; then
found_dir="$dir"
found_a="$dir/lib$name.$libext"
@@ -10112,8 +10166,13 @@ fi
done
fi
else
- LIBMPFR="${LIBMPFR}${LIBMPFR:+ }-l$name"
- LTLIBMPFR="${LTLIBMPFR}${LTLIBMPFR:+ }-l$name"
+ if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
+ LIBMPFR="${LIBMPFR}${LIBMPFR:+ }-l$name"
+ LTLIBMPFR="${LTLIBMPFR}${LTLIBMPFR:+ }-l$name"
+ else
+ LIBMPFR="${LIBMPFR}${LIBMPFR:+ }-l:lib$name.$libext"
+ LTLIBMPFR="${LTLIBMPFR}${LTLIBMPFR:+ }-l:lib$name.$libext"
+ fi
fi
fi
fi
@@ -14004,6 +14063,16 @@ if test "${with_libipt_prefix+set}" = set; then :
fi
+
+# Check whether --with-libipt-type was given.
+if test "${with_libipt_type+set}" = set; then :
+ withval=$with_libipt_type; with_libipt_type=$withval
+else
+ with_libipt_type=auto
+fi
+
+ lib_type=`eval echo \$with_libipt_type`
+
LIBIPT=
LTLIBIPT=
INCIPT=
@@ -14041,13 +14110,13 @@ fi
found_so=
found_a=
if test $use_additional = yes; then
- if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$additional_libdir"
found_so="$additional_libdir/lib$name.$shlibext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$additional_libdir/lib$name.$libext"; then
found_dir="$additional_libdir"
found_a="$additional_libdir/lib$name.$libext"
@@ -14071,13 +14140,13 @@ fi
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$dir"
found_so="$dir/lib$name.$shlibext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$dir/lib$name.$libext"; then
found_dir="$dir"
found_a="$dir/lib$name.$libext"
@@ -14305,8 +14374,13 @@ fi
done
fi
else
- LIBIPT="${LIBIPT}${LIBIPT:+ }-l$name"
- LTLIBIPT="${LTLIBIPT}${LTLIBIPT:+ }-l$name"
+ if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
+ LIBIPT="${LIBIPT}${LIBIPT:+ }-l$name"
+ LTLIBIPT="${LTLIBIPT}${LTLIBIPT:+ }-l$name"
+ else
+ LIBIPT="${LIBIPT}${LIBIPT:+ }-l:lib$name.$libext"
+ LTLIBIPT="${LTLIBIPT}${LTLIBIPT:+ }-l:lib$name.$libext"
+ fi
fi
fi
fi
@@ -16594,6 +16668,16 @@ if test "${with_liblzma_prefix+set}" = set; then :
fi
+
+# Check whether --with-liblzma-type was given.
+if test "${with_liblzma_type+set}" = set; then :
+ withval=$with_liblzma_type; with_liblzma_type=$withval
+else
+ with_liblzma_type=auto
+fi
+
+ lib_type=`eval echo \$with_liblzma_type`
+
LIBLZMA=
LTLIBLZMA=
INCLZMA=
@@ -16631,13 +16715,13 @@ fi
found_so=
found_a=
if test $use_additional = yes; then
- if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$additional_libdir"
found_so="$additional_libdir/lib$name.$shlibext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$additional_libdir/lib$name.$libext"; then
found_dir="$additional_libdir"
found_a="$additional_libdir/lib$name.$libext"
@@ -16661,13 +16745,13 @@ fi
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$dir"
found_so="$dir/lib$name.$shlibext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$dir/lib$name.$libext"; then
found_dir="$dir"
found_a="$dir/lib$name.$libext"
@@ -16895,8 +16979,13 @@ fi
done
fi
else
- LIBLZMA="${LIBLZMA}${LIBLZMA:+ }-l$name"
- LTLIBLZMA="${LTLIBLZMA}${LTLIBLZMA:+ }-l$name"
+ if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
+ LIBLZMA="${LIBLZMA}${LIBLZMA:+ }-l$name"
+ LTLIBLZMA="${LTLIBLZMA}${LTLIBLZMA:+ }-l$name"
+ else
+ LIBLZMA="${LIBLZMA}${LIBLZMA:+ }-l:lib$name.$libext"
+ LTLIBLZMA="${LTLIBLZMA}${LTLIBLZMA:+ }-l:lib$name.$libext"
+ fi
fi
fi
fi
@@ -17920,6 +18009,16 @@ if test "${with_libbabeltrace_prefix+set}" = set; then :
fi
+
+# Check whether --with-libbabeltrace-type was given.
+if test "${with_libbabeltrace_type+set}" = set; then :
+ withval=$with_libbabeltrace_type; with_libbabeltrace_type=$withval
+else
+ with_libbabeltrace_type=auto
+fi
+
+ lib_type=`eval echo \$with_libbabeltrace_type`
+
LIBBABELTRACE=
LTLIBBABELTRACE=
INCBABELTRACE=
@@ -17957,13 +18056,13 @@ fi
found_so=
found_a=
if test $use_additional = yes; then
- if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$additional_libdir"
found_so="$additional_libdir/lib$name.$shlibext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$additional_libdir/lib$name.$libext"; then
found_dir="$additional_libdir"
found_a="$additional_libdir/lib$name.$libext"
@@ -17987,13 +18086,13 @@ fi
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$dir"
found_so="$dir/lib$name.$shlibext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$dir/lib$name.$libext"; then
found_dir="$dir"
found_a="$dir/lib$name.$libext"
@@ -18221,8 +18320,13 @@ fi
done
fi
else
- LIBBABELTRACE="${LIBBABELTRACE}${LIBBABELTRACE:+ }-l$name"
- LTLIBBABELTRACE="${LTLIBBABELTRACE}${LTLIBBABELTRACE:+ }-l$name"
+ if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
+ LIBBABELTRACE="${LIBBABELTRACE}${LIBBABELTRACE:+ }-l$name"
+ LTLIBBABELTRACE="${LTLIBBABELTRACE}${LTLIBBABELTRACE:+ }-l$name"
+ else
+ LIBBABELTRACE="${LIBBABELTRACE}${LIBBABELTRACE:+ }-l:lib$name.$libext"
+ LTLIBBABELTRACE="${LTLIBBABELTRACE}${LTLIBBABELTRACE:+ }-l:lib$name.$libext"
+ fi
fi
fi
fi
@@ -18416,6 +18520,16 @@ if test "${with_libxxhash_prefix+set}" = set; then :
fi
+
+# Check whether --with-libxxhash-type was given.
+if test "${with_libxxhash_type+set}" = set; then :
+ withval=$with_libxxhash_type; with_libxxhash_type=$withval
+else
+ with_libxxhash_type=auto
+fi
+
+ lib_type=`eval echo \$with_libxxhash_type`
+
LIBXXHASH=
LTLIBXXHASH=
INCXXHASH=
@@ -18453,13 +18567,13 @@ fi
found_so=
found_a=
if test $use_additional = yes; then
- if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$additional_libdir"
found_so="$additional_libdir/lib$name.$shlibext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$additional_libdir/lib$name.$libext"; then
found_dir="$additional_libdir"
found_a="$additional_libdir/lib$name.$libext"
@@ -18483,13 +18597,13 @@ fi
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$dir"
found_so="$dir/lib$name.$shlibext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$dir/lib$name.$libext"; then
found_dir="$dir"
found_a="$dir/lib$name.$libext"
@@ -18717,8 +18831,13 @@ fi
done
fi
else
- LIBXXHASH="${LIBXXHASH}${LIBXXHASH:+ }-l$name"
- LTLIBXXHASH="${LTLIBXXHASH}${LTLIBXXHASH:+ }-l$name"
+ if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
+ LIBXXHASH="${LIBXXHASH}${LIBXXHASH:+ }-l$name"
+ LTLIBXXHASH="${LTLIBXXHASH}${LTLIBXXHASH:+ }-l$name"
+ else
+ LIBXXHASH="${LIBXXHASH}${LIBXXHASH:+ }-l:lib$name.$libext"
+ LTLIBXXHASH="${LTLIBXXHASH}${LTLIBXXHASH:+ }-l:lib$name.$libext"
+ fi
fi
fi
fi
diff --git a/gdbserver/configure b/gdbserver/configure
index 0ae464644c9..be5719eb77a 100755
--- a/gdbserver/configure
+++ b/gdbserver/configure
@@ -738,6 +738,7 @@ with_intel_pt
with_gnu_ld
enable_rpath
with_libipt_prefix
+with_libipt_type
with_ust
with_ust_include
with_ust_lib
@@ -1400,6 +1401,7 @@ Optional Packages:
--with-gnu-ld assume the C compiler uses GNU ld default=no
--with-libipt-prefix[=DIR] search for libipt in DIR/include and DIR/lib
--without-libipt-prefix don't search for libipt in includedir and libdir
+ --with-libipt-type=TYPE type of library to search for (auto/static/shared)
--with-ust=PATH Specify prefix directory for the installed UST package
Equivalent to --with-ust-include=PATH/include
plus --with-ust-lib=PATH/lib
@@ -8521,6 +8523,16 @@ if test "${with_libipt_prefix+set}" = set; then :
fi
+
+# Check whether --with-libipt-type was given.
+if test "${with_libipt_type+set}" = set; then :
+ withval=$with_libipt_type; with_libipt_type=$withval
+else
+ with_libipt_type=auto
+fi
+
+ lib_type=`eval echo \$with_libipt_type`
+
LIBIPT=
LTLIBIPT=
INCIPT=
@@ -8558,13 +8570,13 @@ fi
found_so=
found_a=
if test $use_additional = yes; then
- if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$additional_libdir"
found_so="$additional_libdir/lib$name.$shlibext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$additional_libdir/lib$name.$libext"; then
found_dir="$additional_libdir"
found_a="$additional_libdir/lib$name.$libext"
@@ -8588,13 +8600,13 @@ fi
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$dir"
found_so="$dir/lib$name.$shlibext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$dir/lib$name.$libext"; then
found_dir="$dir"
found_a="$dir/lib$name.$libext"
@@ -8822,8 +8834,13 @@ fi
done
fi
else
- LIBIPT="${LIBIPT}${LIBIPT:+ }-l$name"
- LTLIBIPT="${LTLIBIPT}${LTLIBIPT:+ }-l$name"
+ if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
+ LIBIPT="${LIBIPT}${LIBIPT:+ }-l$name"
+ LTLIBIPT="${LTLIBIPT}${LTLIBIPT:+ }-l$name"
+ else
+ LIBIPT="${LIBIPT}${LIBIPT:+ }-l:lib$name.$libext"
+ LTLIBIPT="${LTLIBIPT}${LTLIBIPT:+ }-l:lib$name.$libext"
+ fi
fi
fi
fi
diff --git a/gdbsupport/configure b/gdbsupport/configure
index 8dfd608408e..a4871f8d5bc 100755
--- a/gdbsupport/configure
+++ b/gdbsupport/configure
@@ -770,6 +770,7 @@ with_intel_pt
with_gnu_ld
enable_rpath
with_libipt_prefix
+with_libipt_type
enable_unit_tests
enable_werror
enable_build_warnings
@@ -1433,6 +1434,7 @@ Optional Packages:
--with-gnu-ld assume the C compiler uses GNU ld default=no
--with-libipt-prefix[=DIR] search for libipt in DIR/include and DIR/lib
--without-libipt-prefix don't search for libipt in includedir and libdir
+ --with-libipt-type=TYPE type of library to search for (auto/static/shared)
Some influential environment variables:
CC C compiler command
@@ -9821,6 +9823,16 @@ if test "${with_libipt_prefix+set}" = set; then :
fi
+
+# Check whether --with-libipt-type was given.
+if test "${with_libipt_type+set}" = set; then :
+ withval=$with_libipt_type; with_libipt_type=$withval
+else
+ with_libipt_type=auto
+fi
+
+ lib_type=`eval echo \$with_libipt_type`
+
LIBIPT=
LTLIBIPT=
INCIPT=
@@ -9858,13 +9870,13 @@ fi
found_so=
found_a=
if test $use_additional = yes; then
- if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$additional_libdir"
found_so="$additional_libdir/lib$name.$shlibext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$additional_libdir/lib$name.$libext"; then
found_dir="$additional_libdir"
found_a="$additional_libdir/lib$name.$libext"
@@ -9888,13 +9900,13 @@ fi
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$dir"
found_so="$dir/lib$name.$shlibext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$dir/lib$name.$libext"; then
found_dir="$dir"
found_a="$dir/lib$name.$libext"
@@ -10122,8 +10134,13 @@ fi
done
fi
else
- LIBIPT="${LIBIPT}${LIBIPT:+ }-l$name"
- LTLIBIPT="${LTLIBIPT}${LTLIBIPT:+ }-l$name"
+ if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
+ LIBIPT="${LIBIPT}${LIBIPT:+ }-l$name"
+ LTLIBIPT="${LTLIBIPT}${LTLIBIPT:+ }-l$name"
+ else
+ LIBIPT="${LIBIPT}${LIBIPT:+ }-l:lib$name.$libext"
+ LTLIBIPT="${LTLIBIPT}${LTLIBIPT:+ }-l:lib$name.$libext"
+ fi
fi
fi
fi
diff --git a/intl/configure b/intl/configure
index 2f35993148e..870b29f7d3f 100755
--- a/intl/configure
+++ b/intl/configure
@@ -719,8 +719,10 @@ enable_nls
with_gnu_ld
enable_rpath
with_libiconv_prefix
+with_libiconv_type
with_included_gettext
with_libintl_prefix
+with_libintl_type
enable_maintainer_mode
'
ac_precious_vars='build_alias
@@ -1353,9 +1355,11 @@ Optional Packages:
--with-gnu-ld assume the C compiler uses GNU ld default=no
--with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
--without-libiconv-prefix don't search for libiconv in includedir and libdir
+ --with-libiconv-type=TYPE type of library to search for (auto/static/shared)
--with-included-gettext use the GNU gettext library included here
--with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib
--without-libintl-prefix don't search for libintl in includedir and libdir
+ --with-libintl-type=TYPE type of library to search for (auto/static/shared)
Some influential environment variables:
CC C compiler command
@@ -5195,6 +5199,16 @@ if test "${with_libiconv_prefix+set}" = set; then :
fi
+
+# Check whether --with-libiconv-type was given.
+if test "${with_libiconv_type+set}" = set; then :
+ withval=$with_libiconv_type; with_libiconv_type=$withval
+else
+ with_libiconv_type=auto
+fi
+
+ lib_type=`eval echo \$with_libiconv_type`
+
LIBICONV=
LTLIBICONV=
INCICONV=
@@ -5232,13 +5246,13 @@ fi
found_so=
found_a=
if test $use_additional = yes; then
- if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$additional_libdir"
found_so="$additional_libdir/lib$name.$shlibext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$additional_libdir/lib$name.$libext"; then
found_dir="$additional_libdir"
found_a="$additional_libdir/lib$name.$libext"
@@ -5262,13 +5276,13 @@ fi
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$dir"
found_so="$dir/lib$name.$shlibext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$dir/lib$name.$libext"; then
found_dir="$dir"
found_a="$dir/lib$name.$libext"
@@ -5496,8 +5510,13 @@ fi
done
fi
else
- LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+ if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l:lib$name.$libext"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l:lib$name.$libext"
+ fi
fi
fi
fi
@@ -6026,6 +6045,16 @@ if test "${with_libintl_prefix+set}" = set; then :
fi
+
+# Check whether --with-libintl-type was given.
+if test "${with_libintl_type+set}" = set; then :
+ withval=$with_libintl_type; with_libintl_type=$withval
+else
+ with_libintl_type=auto
+fi
+
+ lib_type=`eval echo \$with_libintl_type`
+
LIBINTL=
LTLIBINTL=
INCINTL=
@@ -6063,13 +6092,13 @@ fi
found_so=
found_a=
if test $use_additional = yes; then
- if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$additional_libdir"
found_so="$additional_libdir/lib$name.$shlibext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$additional_libdir/lib$name.$libext"; then
found_dir="$additional_libdir"
found_a="$additional_libdir/lib$name.$libext"
@@ -6093,13 +6122,13 @@ fi
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext" && test x$lib_type != xstatic; then
found_dir="$dir"
found_so="$dir/lib$name.$shlibext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
- else
+ elif test x$lib_type != xshared; then
if test -f "$dir/lib$name.$libext"; then
found_dir="$dir"
found_a="$dir/lib$name.$libext"
@@ -6327,8 +6356,13 @@ fi
done
fi
else
- LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
+ if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-l:lib$name.$libext"
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l:lib$name.$libext"
+ fi
fi
fi
fi
diff --git a/libiberty/configure b/libiberty/configure
index 7a34dabec32..d2413f13acf 100755
--- a/libiberty/configure
+++ b/libiberty/configure
@@ -3310,11 +3310,11 @@ done
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-
+#include <stdio.h>
int
main ()
{
-
+printf ("hello world\n");
;
return 0;
}
diff --git a/zlib/configure b/zlib/configure
index 041cbdbf715..de6fa7e9960 100755
--- a/zlib/configure
+++ b/zlib/configure
@@ -3397,11 +3397,11 @@ done
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-
+#include <stdio.h>
int
main ()
{
-
+printf ("hello world\n");
;
return 0;
}
--
2.14.5
More information about the Binutils
mailing list