"incompatible target" when trying Gold linker for arm-none-eabi

[R. Diez via binutils]

Hallo Cary:

Many thanks for your answer.

I am using the GCC driver, but "-Wl,-t" did not make any difference in 
the output. However, I just noticed the following messages after all 
other errors:

 
/home/rdiez/GsShared/Toolchains/ToolchainSet-2017-06-01-2/Toolchain-cortex-m4f-bin/lib/gcc/arm-none-eabi/6.3.0/../../../../arm-none-eabi/bin/ld.gold: 
error: cannot find -lugin
 
/home/rdiez/GsShared/Toolchains/ToolchainSet-2017-06-01-2/Toolchain-cortex-m4f-bin/libexec/gcc/arm-none-eabi/6.3.0/liblto_plugin.so
 
/home/rdiez/GsShared/Toolchains/ToolchainSet-2017-06-01-2/Toolchain-cortex-m4f-bin/lib/gcc/arm-none-eabi/6.3.0/../../../../arm-none-eabi/bin/ld.gold: 
error: cannot find 
-lugin-opt=/home/rdiez/GsShared/Toolchains/ToolchainSet-2017-06-01-2/Toolchain-cortex-m4f-bin/libexec/gcc/arm-none-eabi/6.3.0/lto-wrapper
 
/home/rdiez/GsShared/Toolchains/ToolchainSet-2017-06-01-2/Toolchain-cortex-m4f-bin/lib/gcc/arm-none-eabi/6.3.0/../../../../arm-none-eabi/bin/ld.gold: 
error: cannot find -lugin-opt=-fresolution=/tmp/cc8ZO07Q.res
 
/home/rdiez/GsShared/Toolchains/ToolchainSet-2017-06-01-2/Toolchain-cortex-m4f-bin/lib/gcc/arm-none-eabi/6.3.0/../../../../arm-none-eabi/bin/ld.gold: 
error: cannot find -lugin-opt=-pass-through=-lgcc
 
/home/rdiez/GsShared/Toolchains/ToolchainSet-2017-06-01-2/Toolchain-cortex-m4f-bin/lib/gcc/arm-none-eabi/6.3.0/../../../../arm-none-eabi/bin/ld.gold: 
error: cannot find -lugin-opt=-pass-through=-lg
 
/home/rdiez/GsShared/Toolchains/ToolchainSet-2017-06-01-2/Toolchain-cortex-m4f-bin/lib/gcc/arm-none-eabi/6.3.0/../../../../arm-none-eabi/bin/ld.gold: 
error: cannot find -lugin-opt=-pass-through=-lc
 
/home/rdiez/GsShared/Toolchains/ToolchainSet-2017-06-01-2/Toolchain-cortex-m4f-bin/lib/gcc/arm-none-eabi/6.3.0/../../../../arm-none-eabi/bin/ld.gold: 
internal error in set_address, at 
/home/rdiez/GsShared/Toolchains/ToolchainSet-2017-06-01-2/Toolchain-cortex-m4f-build/binutils-2.28/gold/output.h:322

I realised I was not building Gold with plug-in support, so I am doing 
it now. Maybe that would fix the other errors too.

I came across someone else with this problem, so I am not the only one 
hitting this issue:

https://stackoverflow.com/questions/23754665/gold-linker-ld-gold-plugin-unknown-option

I think Gold should always accept options -plugin , --plugin , or 
whatever it can take. If it has not been built with plug-in support, 
then it should print an error message that says exactly that. This way, 
other users will not waste their precious time too anymore. 8-)

Is this right? Should I file a bug somewhere about this?
Best regards,
   rdiez