[PATCH] PR ld/19645: Properly implement STT_COMMON
H.J. Lu
hjl.tools@gmail.com
Fri Feb 26 13:09:00 GMT 2016
On Mon, Feb 22, 2016 at 1:38 PM, H.J. Lu <hongjiu.lu@intel.com> wrote:
> The BFD configure option, --enable-elf-stt-common, can't be to used to
> verify STT_COMMON implementation with the normal binutils build. Instead,
> this patch removes it from BFD. It adds --elf-stt-common=[no|yes] to ELF
> assembler/objcopy and adds -z common/-z nocommon to ld.
>
> A configure option, --enable-elf-stt-common, is added to gas to specify
> whether ELF assembler should generate common symbols with the STT_COMMON
> type by default.
>
> Since BSF_KEEP_G is never used, it is renamed to BSF_ELF_COMMON for ELF
> common symbols.
>
> Any comments?
>
> H.J.
> ---
> bfd/
>
> PR ld/19645
> * bfd.c (bfd): Change flags to 20 bits.
> (BFD_CONVERT_ELF_COMMON): New.
> (BFD_USE_ELF_STT_COMMON): Likewise.
> (BFD_FLAGS_SAVED): Add BFD_CONVERT_ELF_COMMON and
> BFD_USE_ELF_STT_COMMON.
> (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise.
> * configure.ac: Remove --enable-elf-stt-common.
> * elf.c (swap_out_syms): Choose STT_COMMON or STT_OBJECT for
> common symbol depending on BFD_CONVERT_ELF_COMMON and
> BFD_USE_ELF_STT_COMMON.
> * elfcode.h (elf_slurp_symbol_table): Set BSF_ELF_COMMON for
> STT_COMMON.
> * elflink.c (bfd_elf_link_mark_dynamic_symbol): Also check
> STT_COMMON.
> (elf_link_convert_common_type): New function.
> (elf_link_output_extsym): Choose STT_COMMON or STT_OBJECT for
> common symbol depending on BFD_CONVERT_ELF_COMMON and
> BFD_USE_ELF_STT_COMMON. Set sym.st_info after sym.st_shndx.
> * elfxx-target.h (TARGET_BIG_SYM): Add BFD_CONVERT_ELF_COMMON
> and BFD_USE_ELF_STT_COMMON to object_flags.
> (TARGET_LITTLE_SYM): Likewise.
> * syms.c (BSF_KEEP_G): Renamed to ...
> (BSF_ELF_COMMON): This.
> * bfd-in2.h: Regenerated.
> * config.in: Likewise.
> * configure: Likewise.
>
> binutils/
>
> PR ld/19645
> * NEWS: Mention --elf-stt-common= for objcopy.
> * doc/binutils.texi: Document --elf-stt-common= for objcopy.
> * objcopy.c (do_elf_stt_common): New.
> (command_line_switch): Add OPTION_ELF_STT_COMMON.
> (copy_options): Add --elf-stt-common=.
> (copy_usage): Add --elf-stt-common=.
> (copy_object): Also check do_elf_stt_common for ELF targets.
> (copy_file): Handle do_elf_stt_common.
> (copy_main): Handle OPTION_ELF_STT_COMMON.
> * readelf.c (apply_relocations): Support STT_COMMON.
> * testsuite/binutils-all/common-1.s: New file.
> * testsuite/binutils-all/common-1a.d: Likewise.
> * testsuite/binutils-all/common-1b.d: Likewise.
> * testsuite/binutils-all/common-1c.d: Likewise.
> * testsuite/binutils-all/common-1d.d: Likewise.
> * testsuite/binutils-all/common-1e.d: Likewise.
> * testsuite/binutils-all/common-1f.d: Likewise.
> * testsuite/binutils-all/common-2.s: Likewise.
> * testsuite/binutils-all/common-2a.d: Likewise.
> * testsuite/binutils-all/common-2b.d: Likewise.
> * testsuite/binutils-all/common-2c.d: Likewise.
> * testsuite/binutils-all/common-2d.d: Likewise.
> * testsuite/binutils-all/common-2e.d: Likewise.
> * testsuite/binutils-all/common-2f.d: Likewise.
> * testsuite/binutils-all/objcopy.exp
> (objcopy_test_elf_common_symbols): New proc.
> Run objcopy_test_elf_common_symbols for ELF targets
>
> gas/
>
> PR ld/19645
> * NEWS: Mention --enable-elf-stt-common and --elf-stt-common=
> for ELF assemblers.
> * as.c (flag_use_elf_stt_common): New.
> (show_usage): Add --elf-stt-common=.
> (option_values): Add OPTION_ELF_STT_COMMON.
> (std_longopts): Add --elf-stt-common=.
> (parse_args): Handle --elf-stt-common=.
> * as.h (flag_use_elf_stt_common): New.
> * config.in: Regenerated.
> * configure: Likewise.
> * configure.ac: Add --enable-elf-stt-common and define
> DEFAULT_GENERATE_ELF_STT_COMMON.
> * gas/write.c (write_object_file): Set BFD_CONVERT_ELF_COMMON
> and BFD_USE_ELF_STT_COMMON if flag_use_elf_stt_common is set.
> * doc/as.texinfo: Document --elf-stt-common=.
> * testsuite/gas/elf/common3.s: New file.
> * testsuite/gas/elf/common3a.d: Likewise.
> * testsuite/gas/elf/common3b.d: Likewise.
> * testsuite/gas/elf/common4.s: Likewise.
> * testsuite/gas/elf/common4a.d: Likewise.
> * testsuite/gas/elf/common4b.d: Likewise.
> * testsuite/gas/i386/dw2-compress-3b.d: Likewise.
> * testsuite/gas/i386/dw2-compressed-3b.d: Likewise.
> * testsuite/gas/elf/elf.exp: Run common3a, common3b, common4a
> and common4b.
> * testsuite/gas/i386/dw2-compress-3.d: Renamed to ...
> * testsuite/gas/i386/dw2-compress-3a.d: This. Pass
> --elf-stt-common=no to as.
> * testsuite/gas/i386/dw2-compressed-3.d: Renamed to ...
> * testsuite/gas/i386/dw2-compressed-3a.d: This. Pass
> --elf-stt-common=no to as.
> * testsuite/gas/i386/i386.exp: Run dw2-compress-3a,
> dw2-compress-3b, dw2-compressed-3a and dw2-compressed-3b instead
> of dw2-compress-3 and dw2-compressed-3.
>
> include/
>
> PR ld/19645
> * bfdlink.h (bfd_link_elf_stt_common): New enum.
> (bfd_link_info): Add elf_stt_common.
>
> ld/
>
> PR ld/19645
> * NEWS: Mention -z common/-z nocommon for ELF targets.
> * emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Handle
> -z common and -z nocommon.
> * ld.texinfo: Document -z common/-z nocommon.
> * lexsup.c (elf_shlib_list_options): Add -z common/-z nocommon.
> * testsuite/ld-elf/tls_common.exp: Test --elf-stt-common=no and
> --elf-stt-common=yes with assembler.
> * testsuite/ld-elfcomm/common-1.s: New file.
> * testsuite/ld-elfcomm/common-1a.d: Likewise.
> * testsuite/ld-elfcomm/common-1b.d: Likewise.
> * testsuite/ld-elfcomm/common-1c.d: Likewise.
> * testsuite/ld-elfcomm/common-1d.d: Likewise.
> * testsuite/ld-elfcomm/common-1e.d: Likewise.
> * testsuite/ld-elfcomm/common-1f.d: Likewise.
> * testsuite/ld-elfcomm/common-2.s: Likewise.
> * testsuite/ld-elfcomm/common-2a.d: Likewise.
> * testsuite/ld-elfcomm/common-2b.d: Likewise.
> * testsuite/ld-elfcomm/common-2c.d: Likewise.
> * testsuite/ld-elfcomm/common-2d.d: Likewise.
> * testsuite/ld-elfcomm/common-2e.d: Likewise.
> * testsuite/ld-elfcomm/common-2f.d: Likewise.
> * testsuite/ld-elfcomm/common-3a.rd: Likewise.
> * testsuite/ld-elfcomm/common-3b.rd: Likewise.
> * testsuite/ld-i386/pr19645.d: Likewise.
> * testsuite/ld-i386/pr19645.s: Likewise.
> * testsuite/ld-x86-64/pr19645.d: Likewise.
> * testsuite/ld-x86-64/pr19645.s: Likewise.
> * testsuite/ld-elfcomm/elfcomm.exp: Test --elf-stt-common=yes
> with assembler.
> (assembler_generates_commons): Removed.
> Run -z common/-z nocommon tests. Run *.d tests.
> * testsuite/ld-i386/i386.exp: Run pr19645.
> * testsuite/ld-x86-64/x86-64.exp: Likewise.
> * testsuite/ld-x86-64/dwarfreloc.exp: Test --elf-stt-common with
> assembler. Test STT_COMMON with readelf.
This is the patch I am going to check in.
--
H.J.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-Properly-implement-STT_COMMON.patch
Type: application/octet-stream
Size: 99275 bytes
Desc: not available
URL: <https://sourceware.org/pipermail/binutils/attachments/20160226/3327515a/attachment.obj>
More information about the Binutils
mailing list