Rebased & reworked: [Patch mach-o 1/3] section directives needed to support GCC
Iain Sandoe
developer@sandoe-acoustics.co.uk
Tue Dec 13 13:46:00 GMT 2011
rebased to use objdump -P.
plus changes per your comments (with some specific observations as
below).
On 13 Dec 2011, at 09:44, Tristan Gingold wrote:
> See enclosing comments,
>> + 0 entry. */
>> + _bfd_stringtab_add (strtab, "", TRUE, FALSE);
>> +
>Ah, yes. BTW I think that the string is padded to 4 or 8 bytes too.
not for XCode 3.1.4 or 3.2.5 (I don't have XC 4.x yet) -
however, I did notice it should not be emitted unless there is at
least one symbol - amended.
>> + *input_line_pointer = '\0'; /* make a temp string. */
>> + as_warn (_("the %s name '%s' exceeds 16 characters, truncated"),
>> + msg, namstart);
>Warning or error ?
thanks, it should be error - to match system tools, amended.
>> + /* 10 */ {".picsymbol_stub2", 25, 0}, /* X86 - extension */
>> + /* 11 */ {".picsymbol_stub3", 5, 0}, /* X86 - extension */
>> +};
>Should we #if/#endif arch extensions ?
.. as it is, it allows us to make a more specific and User-friendly
error message than
the generic "Unknown pseudo-op"... but if you would prefer to ifdef -
I think it should
be in the main table below - or we'll have to keep track of changing
indices.
>> static symbolS *
> Usually we let a blank line between the comment and the
definition. There are many occurrences and I am not sure the existing
code always follow this rule.
I've changed all the occurances in this file, will try to catch others
as I go.
> + { "picsymbol_stub2", obj_mach_o_opt_tgt_section, 4}, /*
extension. */
> + { "picsymbol_stub3", obj_mach_o_opt_tgt_section, 4}, /*
extension. */
#if/#endif arch specific pseudo ?
here if at all - but comment as above.
>> + (BFDSEC)->used_by_bfd = (MACHOSEC)
>> +
>> +#define OBJ_MACH_O_GET_BACKEND_SECT_DATA(ABFD, BFDSEC) (BFDSEC)-
>used_by_bfd
>Doesn't this duplicate mach-o.h: bfd_mach_o_get_mach_o_section ?
removed.
========
Hopefully, OK now.
cheers
Iain
bfd/mach-o-i386.c | 55 +++
bfd/mach-o-target.c | 3 +-
bfd/mach-o-x86-64.c | 1 +
bfd/mach-o.c | 488 ++++++++++++++++++-------
bfd/mach-o.h | 52 ++-
gas/config/obj-macho.c | 676 ++++++++++++++++++++++++
++++-----
gas/config/obj-macho.h | 20 +-
gas/testsuite/gas/mach-o/comm-1.d | 13 +
gas/testsuite/gas/mach-o/comm-1.s | 12 +
gas/testsuite/gas/mach-o/lcomm-1.s | 2 +-
gas/testsuite/gas/mach-o/sections-1.d | 384 +++++++++++++++++++
gas/testsuite/gas/mach-o/sections-1.s | 87 +++++
gas/testsuite/gas/mach-o/warn-1.s | 4 +-
include/mach-o/loader.h | 3 +
14 files changed, 1553 insertions(+), 247 deletions(-)
diff --git a/bfd/mach-o-i386.c b/bfd/mach-o-i386.c
index 1191560..c5e3884 100644
--- a/bfd/mach-o-i386.c
+++ b/bfd/mach-o-i386.c
@@ -280,10 +280,65 @@ bfd_mach_o_i386_print_thread (bfd *abfd,
bfd_mach_o_thread_flavour *thread,
return FALSE;
}
+static const mach_o_section_name_xlat text_section_names_xlat[] =
+ {
+ { ".symbol_stub", "__symbol_stub",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_SYMBOL_STUBS,
+ BFD_MACH_O_S_ATTR_PURE_INSTRUCTIONS,
+ 0},
+ { ".picsymbol_stub", "__picsymbol_stub",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_SYMBOL_STUBS,
+ BFD_MACH_O_S_ATTR_PURE_INSTRUCTIONS,
+ 0},
+ { NULL, NULL, 0, 0, 0, 0}
+ };
+
+static const mach_o_section_name_xlat data_section_names_xlat[] =
+ {
+ /* The first two are recognized by i386, but not emitted for x86 by
+ modern GCC. */
+ { ".non_lazy_symbol_pointer", "__nl_symbol_ptr",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_NON_LAZY_SYMBOL_POINTERS,
+ BFD_MACH_O_S_ATTR_NONE, 2},
+ { ".lazy_symbol_pointer", "__la_symbol_ptr",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_LAZY_SYMBOL_POINTERS,
+ BFD_MACH_O_S_ATTR_NONE, 2},
+ { ".lazy_symbol_pointer2", "__la_sym_ptr2",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_LAZY_SYMBOL_POINTERS,
+ BFD_MACH_O_S_ATTR_NONE, 2},
+ { ".lazy_symbol_pointer3", "__la_sym_ptr3",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_LAZY_SYMBOL_POINTERS,
+ BFD_MACH_O_S_ATTR_NONE, 2},
+ { NULL, NULL, 0, 0, 0, 0}
+ };
+
+static const mach_o_section_name_xlat import_section_names_xlat[] =
+ {
+ { ".picsymbol_stub3", "__jump_table",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_SYMBOL_STUBS,
+ BFD_MACH_O_S_ATTR_PURE_INSTRUCTIONS
+ | BFD_MACH_O_S_SELF_MODIFYING_CODE,
+ 6},
+ { ".non_lazy_symbol_pointer_x86", "__pointers",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_NON_LAZY_SYMBOL_POINTERS,
+ BFD_MACH_O_S_ATTR_NONE, 2},
+ { NULL, NULL, 0, 0, 0, 0}
+ };
+
+const mach_o_segment_name_xlat mach_o_i386_segsec_names_xlat[] =
+ {
+ { "__TEXT", text_section_names_xlat },
+ { "__DATA", data_section_names_xlat },
+ { "__IMPORT", import_section_names_xlat },
+ { NULL, NULL }
+ };
+
#define bfd_mach_o_swap_reloc_in bfd_mach_o_i386_swap_reloc_in
#define bfd_mach_o_swap_reloc_out bfd_mach_o_i386_swap_reloc_out
#define bfd_mach_o_print_thread bfd_mach_o_i386_print_thread
+#define bfd_mach_o_tgt_seg_table mach_o_i386_segsec_names_xlat
+
#define bfd_mach_o_bfd_reloc_type_lookup
bfd_mach_o_i386_bfd_reloc_type_lookup
#define bfd_mach_o_bfd_reloc_name_lookup
bfd_mach_o_i386_bfd_reloc_name_lookup
diff --git a/bfd/mach-o-target.c b/bfd/mach-o-target.c
index 5e12f84..316b7b9 100644
--- a/bfd/mach-o-target.c
+++ b/bfd/mach-o-target.c
@@ -97,7 +97,8 @@ static const bfd_mach_o_backend_data
TARGET_NAME_BACKEND =
TARGET_ARCHITECTURE,
bfd_mach_o_swap_reloc_in,
bfd_mach_o_swap_reloc_out,
- bfd_mach_o_print_thread
+ bfd_mach_o_print_thread,
+ bfd_mach_o_tgt_seg_table
};
const bfd_target TARGET_NAME =
diff --git a/bfd/mach-o-x86-64.c b/bfd/mach-o-x86-64.c
index 2248d97..1bc3bf8 100644
--- a/bfd/mach-o-x86-64.c
+++ b/bfd/mach-o-x86-64.c
@@ -287,6 +287,7 @@ bfd_mach_o_x86_64_bfd_reloc_name_lookup (bfd *abfd
ATTRIBUTE_UNUSED,
#define bfd_mach_o_bfd_reloc_type_lookup
bfd_mach_o_x86_64_bfd_reloc_type_lookup
#define bfd_mach_o_bfd_reloc_name_lookup
bfd_mach_o_x86_64_bfd_reloc_name_lookup
#define bfd_mach_o_print_thread NULL
+#define bfd_mach_o_tgt_seg_table NULL
#define TARGET_NAME mach_o_x86_64_vec
#define TARGET_STRING "mach-o-x86-64"
diff --git a/bfd/mach-o.c b/bfd/mach-o.c
index 0a614c3..e40fc0e 100644
--- a/bfd/mach-o.c
+++ b/bfd/mach-o.c
@@ -87,118 +87,312 @@ bfd_mach_o_wide_p (bfd *abfd)
names. Use of canonical names (such as .text or .debug_frame) is
required
by gdb. */
-struct mach_o_section_name_xlat
-{
- const char *bfd_name;
- const char *mach_o_name;
- flagword flags;
-};
-
-static const struct mach_o_section_name_xlat
dwarf_section_names_xlat[] =
+/* __TEXT Segment. */
+static const mach_o_section_name_xlat text_section_names_xlat[] =
{
- { ".debug_frame", "__debug_frame", SEC_DEBUGGING },
- { ".debug_info", "__debug_info", SEC_DEBUGGING },
- { ".debug_abbrev", "__debug_abbrev", SEC_DEBUGGING },
- { ".debug_aranges", "__debug_aranges", SEC_DEBUGGING },
- { ".debug_macinfo", "__debug_macinfo", SEC_DEBUGGING },
- { ".debug_line", "__debug_line", SEC_DEBUGGING },
- { ".debug_loc", "__debug_loc", SEC_DEBUGGING },
- { ".debug_pubnames", "__debug_pubnames", SEC_DEBUGGING },
- { ".debug_pubtypes", "__debug_pubtypes", SEC_DEBUGGING },
- { ".debug_str", "__debug_str", SEC_DEBUGGING },
- { ".debug_ranges", "__debug_ranges", SEC_DEBUGGING },
- { NULL, NULL, 0}
+ { ".text", "__text",
+ SEC_CODE | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_PURE_INSTRUCTIONS, 0},
+ { ".const", "__const",
+ SEC_READONLY | SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NONE, 0},
+ { ".static_const", "__static_const",
+ SEC_READONLY | SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NONE, 0},
+ { ".cstring", "__cstring",
+ SEC_READONLY | SEC_DATA | SEC_LOAD | SEC_MERGE | SEC_STRINGS,
+ BFD_MACH_O_S_CSTRING_LITERALS,
+ BFD_MACH_O_S_ATTR_NONE, 0},
+ { ".literal4", "__literal4",
+ SEC_READONLY | SEC_DATA | SEC_LOAD, BFD_MACH_O_S_4BYTE_LITERALS,
+ BFD_MACH_O_S_ATTR_NONE, 2},
+ { ".literal8", "__literal8",
+ SEC_READONLY | SEC_DATA | SEC_LOAD, BFD_MACH_O_S_8BYTE_LITERALS,
+ BFD_MACH_O_S_ATTR_NONE, 3},
+ { ".literal16", "__literal16",
+ SEC_READONLY | SEC_DATA | SEC_LOAD, BFD_MACH_O_S_16BYTE_LITERALS,
+ BFD_MACH_O_S_ATTR_NONE, 4},
+ { ".constructor", "__constructor",
+ SEC_CODE | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NONE, 0},
+ { ".destructor", "__destructor",
+ SEC_CODE | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NONE, 0},
+ { ".eh_frame", "__eh_frame",
+ SEC_READONLY | SEC_LOAD, BFD_MACH_O_S_COALESCED,
+ BFD_MACH_O_S_ATTR_LIVE_SUPPORT
+ | BFD_MACH_O_S_ATTR_STRIP_STATIC_SYMS
+ | BFD_MACH_O_S_ATTR_NO_TOC, 3},
+ { NULL, NULL, 0, 0, 0, 0}
};
-static const struct mach_o_section_name_xlat
text_section_names_xlat[] =
+/* __DATA Segment. */
+static const mach_o_section_name_xlat data_section_names_xlat[] =
{
- { ".text", "__text", SEC_CODE | SEC_LOAD },
- { ".const", "__const", SEC_READONLY | SEC_DATA | SEC_LOAD },
- { ".cstring", "__cstring", SEC_READONLY | SEC_DATA | SEC_LOAD },
- { ".eh_frame", "__eh_frame", SEC_READONLY | SEC_LOAD },
- { NULL, NULL, 0}
+ { ".data", "__data",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NONE, 0},
+ { ".bss", "__bss",
+ SEC_NO_FLAGS, BFD_MACH_O_S_ZEROFILL,
+ BFD_MACH_O_S_ATTR_NONE, 0},
+ { ".const_data", "__const",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NONE, 0},
+ { ".static_data", "__static_data",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NONE, 0},
+ { ".mod_init_func", "__mod_init_func",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_MOD_INIT_FUNC_POINTERS,
+ BFD_MACH_O_S_ATTR_NONE, 2},
+ { ".mod_term_func", "__mod_term_func",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_MOD_FINI_FUNC_POINTERS,
+ BFD_MACH_O_S_ATTR_NONE, 2},
+ { ".dyld", "__dyld",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NONE, 0},
+ { ".cfstring", "__cfstring",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NONE, 2},
+ { NULL, NULL, 0, 0, 0, 0}
};
-static const struct mach_o_section_name_xlat
data_section_names_xlat[] =
+/* __DWARF Segment. */
+static const mach_o_section_name_xlat dwarf_section_names_xlat[] =
{
- { ".data", "__data", SEC_DATA | SEC_LOAD },
- { ".const_data", "__const", SEC_DATA | SEC_LOAD },
- { ".dyld", "__dyld", SEC_DATA | SEC_LOAD },
- { ".lazy_symbol_ptr", "__la_symbol_ptr", SEC_DATA | SEC_LOAD },
- { ".non_lazy_symbol_ptr", "__nl_symbol_ptr", SEC_DATA | SEC_LOAD },
- { ".bss", "__bss", SEC_NO_FLAGS },
- { NULL, NULL, 0}
+ { ".debug_frame", "__debug_frame",
+ SEC_DEBUGGING, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_DEBUG, 0},
+ { ".debug_info", "__debug_info",
+ SEC_DEBUGGING, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_DEBUG, 0},
+ { ".debug_abbrev", "__debug_abbrev",
+ SEC_DEBUGGING, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_DEBUG, 0},
+ { ".debug_aranges", "__debug_aranges",
+ SEC_DEBUGGING, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_DEBUG, 0},
+ { ".debug_macinfo", "__debug_macinfo",
+ SEC_DEBUGGING, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_DEBUG, 0},
+ { ".debug_line", "__debug_line",
+ SEC_DEBUGGING, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_DEBUG, 0},
+ { ".debug_loc", "__debug_loc",
+ SEC_DEBUGGING, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_DEBUG, 0},
+ { ".debug_pubnames", "__debug_pubnames",
+ SEC_DEBUGGING, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_DEBUG, 0},
+ { ".debug_pubtypes", "__debug_pubtypes",
+ SEC_DEBUGGING, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_DEBUG, 0},
+ { ".debug_str", "__debug_str",
+ SEC_DEBUGGING, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_DEBUG, 0},
+ { ".debug_ranges", "__debug_ranges",
+ SEC_DEBUGGING, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_DEBUG, 0},
+ { ".debug_macro", "__debug_macro",
+ SEC_DEBUGGING, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_DEBUG, 0},
+ { NULL, NULL, 0, 0, 0, 0}
};
-struct mach_o_segment_name_xlat
-{
- /* Segment name. */
- const char *segname;
-
- /* List of known sections for the segment. */
- const struct mach_o_section_name_xlat *sections;
-};
-
-/* List of known segment names. */
+/* __OBJC Segment. */
+static const mach_o_section_name_xlat objc_section_names_xlat[] =
+ {
+ { ".objc_class", "__class",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc_meta_class", "__meta_class",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc_cat_cls_meth", "__cat_cls_meth",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc_cat_inst_meth", "__cat_inst_meth",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc_protocol", "__protocol",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc_string_object", "__string_object",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc_cls_meth", "__cls_meth",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc_inst_meth", "__inst_meth",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc_cls_refs", "__cls_refs",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_LITERAL_POINTERS,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc_message_refs", "__message_refs",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_LITERAL_POINTERS,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc_symbols", "__symbols",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc_category", "__category",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc_class_vars", "__class_vars",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc_instance_vars", "__instance_vars",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc_module_info", "__module_info",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc_selector_strs", "__selector_strs",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_CSTRING_LITERALS,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc_image_info", "__image_info",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc_selector_fixup", "__sel_fixup",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ /* Objc V1 */
+ { ".objc1_class_ext", "__class_ext",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc1_property_list", "__property",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { ".objc1_protocol_ext", "__protocol_ext",
+ SEC_DATA | SEC_LOAD, BFD_MACH_O_S_REGULAR,
+ BFD_MACH_O_S_ATTR_NO_DEAD_STRIP, 0},
+ { NULL, NULL, 0, 0, 0, 0}
+ };
-static const struct mach_o_segment_name_xlat segsec_names_xlat[] =
+static const mach_o_segment_name_xlat segsec_names_xlat[] =
{
{ "__TEXT", text_section_names_xlat },
{ "__DATA", data_section_names_xlat },
{ "__DWARF", dwarf_section_names_xlat },
+ { "__OBJC", objc_section_names_xlat },
{ NULL, NULL }
};
-/* Mach-O to bfd names. */
+/* For both cases bfd-name => mach-o name and vice versa, the
specific target
+ is checked before the generic. This allows a target (e.g. ppc for
cstring)
+ to override the generic definition with a more specific one. */
-void
-bfd_mach_o_normalize_section_name (const char *segname, const char
*sectname,
- const char **name, flagword *flags)
+/* Fetch the translation from a Mach-O section designation (segment,
section)
+ as a bfd short name, if one exists. Otherwise return NULL.
+
+ Allow the segment and section names to be unterminated 16 byte
arrays. */
+
+const mach_o_section_name_xlat *
+bfd_mach_o_section_data_for_mach_sect (bfd *abfd, const char *segname,
+ const char *sectname)
{
const struct mach_o_segment_name_xlat *seg;
+ const mach_o_section_name_xlat *sec;
+ bfd_mach_o_backend_data *bed = bfd_mach_o_get_backend_data (abfd);
- *name = NULL;
- *flags = SEC_NO_FLAGS;
+ /* First try any target-specific translations defined... */
+ if (bed->segsec_names_xlat)
+ for (seg = bed->segsec_names_xlat; seg->segname; seg++)
+ if (strncmp (seg->segname, segname, BFD_MACH_O_SEGNAME_SIZE) ==
0)
+ for (sec = seg->sections; sec->mach_o_name; sec++)
+ if (strncmp (sec->mach_o_name, sectname,
+ BFD_MACH_O_SECTNAME_SIZE) == 0)
+ return sec;
+ /* ... and then the Mach-O generic ones. */
for (seg = segsec_names_xlat; seg->segname; seg++)
- {
- if (strncmp (seg->segname, segname, BFD_MACH_O_SEGNAME_SIZE) ==
0)
- {
- const struct mach_o_section_name_xlat *sec;
+ if (strncmp (seg->segname, segname, BFD_MACH_O_SEGNAME_SIZE) == 0)
+ for (sec = seg->sections; sec->mach_o_name; sec++)
+ if (strncmp (sec->mach_o_name, sectname,
+ BFD_MACH_O_SECTNAME_SIZE) == 0)
+ return sec;
- for (sec = seg->sections; sec->mach_o_name; sec++)
- {
- if (strncmp (sec->mach_o_name, sectname,
- BFD_MACH_O_SECTNAME_SIZE) == 0)
- {
- *name = sec->bfd_name;
- *flags = sec->flags;
- return;
- }
- }
- return;
- }
- }
+ return NULL;
}
-/* Convert Mach-O section name to BFD. Try to use standard names,
otherwise
- forge a new name. SEGNAME and SECTNAME are 16 bytes strings. */
+/* If the bfd_name for this section is a 'canonical' form for which we
+ know the Mach-O data, return the segment name and the data for the
+ Mach-O equivalent. Otherwise return NULL. */
-static void
-bfd_mach_o_convert_section_name_to_bfd
- (bfd *abfd, const char *segname, const char *sectname,
- const char **name, flagword *flags)
+const mach_o_section_name_xlat *
+bfd_mach_o_section_data_for_bfd_name (bfd *abfd, const char *bfd_name,
+ const char **segname)
{
+ const struct mach_o_segment_name_xlat *seg;
+ const mach_o_section_name_xlat *sec;
+ bfd_mach_o_backend_data *bed = bfd_mach_o_get_backend_data (abfd);
+ *segname = NULL;
+
+ if (bfd_name[0] != '.')
+ return NULL;
+
+ /* First try any target-specific translations defined... */
+ if (bed->segsec_names_xlat)
+ for (seg = bed->segsec_names_xlat; seg->segname; seg++)
+ for (sec = seg->sections; sec->bfd_name; sec++)
+ if (strcmp (bfd_name, sec->bfd_name) == 0)
+ {
+ *segname = seg->segname;
+ return sec;
+ }
+
+ /* ... and then the Mach-O generic ones. */
+ for (seg = segsec_names_xlat; seg->segname; seg++)
+ for (sec = seg->sections; sec->bfd_name; sec++)
+ if (strcmp (bfd_name, sec->bfd_name) == 0)
+ {
+ *segname = seg->segname;
+ return sec;
+ }
+
+ return NULL;
+}
+
+/* Convert Mach-O section name to BFD.
+
+ Try to use standard/canonical names, for which we have tables
including
+ default flag settings - which are returned. Otherwise forge a new
name
+ in the form "<segmentname>.<sectionname>" this will be prefixed with
+ LC_SEGMENT. if the segment name does not begin with an underscore.
+
+ SEGNAME and SECTNAME are 16 byte arrays (they do not need to be NUL-
+ terminated if the name length is exactly 16 bytes - but must be if
the name
+ length is less than 16 characters). */
+
+void
+bfd_mach_o_convert_section_name_to_bfd (bfd *abfd, const char *segname,
+ const char *secname, const char **name,
+ flagword *flags)
+{
+ const mach_o_section_name_xlat *xlat;
char *res;
unsigned int len;
const char *pfx = "";
- /* First search for a canonical name. */
- bfd_mach_o_normalize_section_name (segname, sectname, name, flags);
+ *name = NULL;
+ *flags = SEC_NO_FLAGS;
- /* Return now if found. */
- if (*name)
- return;
+ /* First search for a canonical name...
+ xlat will be non-null if there is an entry for segname,
secname. */
+ xlat = bfd_mach_o_section_data_for_mach_sect (abfd, segname,
secname);
+ if (xlat)
+ {
+ len = strlen (xlat->bfd_name);
+ res = bfd_alloc (abfd, len+1);
+ if (res == NULL)
+ return;
+ memcpy (res, xlat->bfd_name, len+1);
+ *name = res;
+ *flags = xlat->bfd_flags;
+ return;
+ }
+
+ /* ... else we make up a bfd name from the segment concatenated
with the
+ section. */
len = 16 + 1 + 16 + 1;
@@ -215,43 +409,46 @@ bfd_mach_o_convert_section_name_to_bfd
res = bfd_alloc (abfd, len);
if (res == NULL)
return;
- snprintf (res, len, "%s%.16s.%.16s", pfx, segname, sectname);
+ snprintf (res, len, "%s%.16s.%.16s", pfx, segname, secname);
*name = res;
- *flags = SEC_NO_FLAGS;
}
-/* Convert a bfd section name to a Mach-O segment + section name. */
+/* Convert a bfd section name to a Mach-O segment + section name.
-static void
+ If the name is a canonical one for which we have a Darwin match
+ return the translation table - which contains defaults for flags,
+ type, attribute and default alignment data.
+
+ Otherwise, expand the bfd_name (assumed to be in the form
+ "[LC_SEGMENT.]<segmentname>.<sectionname>") and return NULL. */
+
+static const mach_o_section_name_xlat *
bfd_mach_o_convert_section_name_to_mach_o (bfd *abfd ATTRIBUTE_UNUSED,
asection *sect,
bfd_mach_o_section
*section)
{
- const struct mach_o_segment_name_xlat *seg;
+ const mach_o_section_name_xlat *xlat;
const char *name = bfd_get_section_name (abfd, sect);
+ const char *segname;
const char *dot;
unsigned int len;
unsigned int seglen;
unsigned int seclen;
- /* List of well known names. They all start with a dot. */
- if (name[0] == '.')
- for (seg = segsec_names_xlat; seg->segname; seg++)
- {
- const struct mach_o_section_name_xlat *sec;
-
- for (sec = seg->sections; sec->mach_o_name; sec++)
- {
- if (strcmp (sec->bfd_name, name) == 0)
- {
- strcpy (section->segname, seg->segname);
- strcpy (section->sectname, sec->mach_o_name);
- return;
- }
- }
- }
+ memset (section->segname, 0, BFD_MACH_O_SEGNAME_SIZE + 1);
+ memset (section->sectname, 0, BFD_MACH_O_SECTNAME_SIZE + 1);
+
+ /* See if is a canonical name ... */
+ xlat = bfd_mach_o_section_data_for_bfd_name (abfd, name, &segname);
+ if (xlat)
+ {
+ strcpy (section->segname, segname);
+ strcpy (section->sectname, xlat->mach_o_name);
+ return xlat;
+ }
- /* Strip LC_SEGMENT. prefix. */
+ /* .. else we convert our constructed one back to Mach-O.
+ Strip LC_SEGMENT. prefix, if present. */
if (strncmp (name, "LC_SEGMENT.", 11) == 0)
name += 11;
@@ -271,16 +468,23 @@ bfd_mach_o_convert_section_name_to_mach_o (bfd
*abfd ATTRIBUTE_UNUSED,
section->segname[seglen] = 0;
memcpy (section->sectname, dot + 1, seclen);
section->sectname[seclen] = 0;
- return;
+ return NULL;
}
}
+ /* The segment and section names are both missing - don't make them
+ into dots. */
+ if (dot && dot == name)
+ return NULL;
+
+ /* Just duplicate the name into both segment and section. */
if (len > 16)
len = 16;
memcpy (section->segname, name, len);
section->segname[len] = 0;
memcpy (section->sectname, name, len);
section->sectname[len] = 0;
+ return NULL;
}
/* Return the size of an entry for section SEC.
@@ -337,10 +541,20 @@ bfd_mach_o_bfd_copy_private_symbol_data (bfd
*ibfd ATTRIBUTE_UNUSED,
bfd_boolean
bfd_mach_o_bfd_copy_private_section_data (bfd *ibfd ATTRIBUTE_UNUSED,
- asection *isection ATTRIBUTE_UNUSED,
+ asection *isection,
bfd *obfd ATTRIBUTE_UNUSED,
- asection *osection ATTRIBUTE_UNUSED)
-{
+ asection *osection)
+{
+ if (osection->used_by_bfd == NULL)
+ osection->used_by_bfd = isection->used_by_bfd;
+ else
+ if (isection->used_by_bfd != NULL)
+ memcpy (osection->used_by_bfd, isection->used_by_bfd,
+ sizeof (bfd_mach_o_section));
+
+ if (osection->used_by_bfd != NULL)
+ ((bfd_mach_o_section *)osection->used_by_bfd)->bfdsection =
osection;
+
return TRUE;
}
@@ -1099,6 +1313,12 @@ bfd_mach_o_write_symtab (bfd *abfd,
bfd_mach_o_load_command *command)
if (strtab == NULL)
return FALSE;
+ if (sym->nsyms > 0)
+ /* Although we don't strictly need to do this, for compatibility
with
+ Darwin system tools, actually output an empty string for the
index
+ 0 entry. */
+ _bfd_stringtab_add (strtab, "", TRUE, FALSE);
+
for (i = 0; i < sym->nsyms; i++)
{
bfd_size_type str_index;
@@ -1415,22 +1635,22 @@ bfd_mach_o_build_commands (bfd *abfd)
seg->sect_head = NULL;
seg->sect_tail = NULL;
- /* Create Mach-O sections. */
+ /* Create Mach-O sections.
+ Section type, attribute and align should have been set when the
+ section was created - either read in or specified. */
target_index = 0;
for (sec = abfd->sections; sec; sec = sec->next)
{
+ unsigned bfd_align = bfd_get_section_alignment (abfd, sec);
bfd_mach_o_section *msect = bfd_mach_o_get_mach_o_section (sec);
bfd_mach_o_append_section_to_segment (seg, sec);
- if (msect->flags == 0)
- {
- /* We suppose it hasn't been set. Convert from BFD flags.
*/
- bfd_mach_o_set_section_flags_from_bfd (abfd, sec);
- }
msect->addr = bfd_get_section_vma (abfd, sec);
msect->size = bfd_get_section_size (sec);
- msect->align = bfd_get_section_alignment (abfd, sec);
+ /* Use the largest alignment set, in case it was bumped after the
+ section was created. */
+ msect->align = msect->align > bfd_align ? msect->align :
bfd_align;
if (msect->size != 0)
{
@@ -1572,11 +1792,13 @@ bfd_boolean
bfd_mach_o_new_section_hook (bfd *abfd, asection *sec)
{
bfd_mach_o_section *s;
+ unsigned bfdalign = bfd_get_section_alignment (abfd, sec);
s = bfd_mach_o_get_mach_o_section (sec);
if (s == NULL)
{
flagword bfd_flags;
+ static const mach_o_section_name_xlat * xlat;
s = (bfd_mach_o_section *) bfd_zalloc (abfd, sizeof (*s));
if (s == NULL)
@@ -1584,21 +1806,24 @@ bfd_mach_o_new_section_hook (bfd *abfd,
asection *sec)
sec->used_by_bfd = s;
s->bfdsection = sec;
- /* Create default name. */
- bfd_mach_o_convert_section_name_to_mach_o (abfd, sec, s);
-
- /* Create default flags. */
- bfd_flags = bfd_get_section_flags (abfd, sec);
- if ((bfd_flags & SEC_CODE) == SEC_CODE)
- s->flags = BFD_MACH_O_S_ATTR_PURE_INSTRUCTIONS
- | BFD_MACH_O_S_ATTR_SOME_INSTRUCTIONS
- | BFD_MACH_O_S_REGULAR;
- else if ((bfd_flags & (SEC_ALLOC | SEC_LOAD)) == SEC_ALLOC)
- s->flags = BFD_MACH_O_S_ZEROFILL;
- else if (bfd_flags & SEC_DEBUGGING)
- s->flags = BFD_MACH_O_S_REGULAR | BFD_MACH_O_S_ATTR_DEBUG;
+ /* Create the Darwin seg/sect name pair from the bfd name.
+ If this is a canonical name for which a specific paiting exists
+ there will also be defined flags, type, attribute and alignment
+ values. */
+ xlat = bfd_mach_o_convert_section_name_to_mach_o (abfd, sec, s);
+ if (xlat != NULL)
+ {
+ s->flags = xlat->macho_sectype | xlat->macho_secattr;
+ s->align = xlat->sectalign > bfdalign ? xlat->sectalign
+ : bfdalign;
+ bfd_set_section_alignment (abfd, sec, s->align);
+ bfd_flags = bfd_get_section_flags (abfd, sec);
+ if (bfd_flags == SEC_NO_FLAGS)
+ bfd_set_section_flags (abfd, sec, xlat->bfd_flags);
+ }
else
- s->flags = BFD_MACH_O_S_REGULAR;
+ /* Create default flags. */
+ bfd_mach_o_set_section_flags_from_bfd (abfd, sec);
}
return _bfd_generic_new_section_hook (abfd, sec);
@@ -1614,6 +1839,9 @@ bfd_mach_o_init_section_from_mach_o (bfd *abfd,
asection *sec,
flags = bfd_get_section_flags (abfd, sec);
section = bfd_mach_o_get_mach_o_section (sec);
+ /* TODO: see if we should use the xlat system for doing this by
+ preference and fall back to this for unknown sections. */
+
if (flags == SEC_NO_FLAGS)
{
/* Try to guess flags. */
@@ -3323,6 +3551,7 @@ const bfd_mach_o_xlat_name
bfd_mach_o_section_type_name[] =
{ "interposing", BFD_MACH_O_S_INTERPOSING},
{ "16byte_literals", BFD_MACH_O_S_16BYTE_LITERALS},
{ "dtrace_dof", BFD_MACH_O_S_DTRACE_DOF},
+ { "symbol_stubs", BFD_MACH_O_S_SYMBOL_STUBS},
{ "lazy_dylib_symbol_pointers",
BFD_MACH_O_S_LAZY_DYLIB_SYMBOL_POINTERS},
{ NULL, 0}
};
@@ -3339,10 +3568,11 @@ const bfd_mach_o_xlat_name
bfd_mach_o_section_attribute_name[] =
{ "strip_static_syms", BFD_MACH_O_S_ATTR_STRIP_STATIC_SYMS },
{ "no_toc", BFD_MACH_O_S_ATTR_NO_TOC },
{ "pure_instructions", BFD_MACH_O_S_ATTR_PURE_INSTRUCTIONS },
+ { "self_modifying_code", BFD_MACH_O_S_SELF_MODIFYING_CODE },
{ NULL, 0}
};
-/* Get the section type from NAME. Return -1 if NAME is unknown. */
+/* Get the section type from NAME. Return 256 if NAME is unknown. */
unsigned int
bfd_mach_o_get_section_type_from_name (const char *name)
@@ -3352,7 +3582,8 @@ bfd_mach_o_get_section_type_from_name (const
char *name)
for (x = bfd_mach_o_section_type_name; x->name; x++)
if (strcmp (x->name, name) == 0)
return x->val;
- return (unsigned int)-1;
+ /* Maximum section ID = 0xff. */
+ return 256;
}
/* Get the section attribute from NAME. Return -1 if NAME is
unknown. */
@@ -3486,6 +3717,7 @@ bfd_mach_o_core_file_failing_signal (bfd *abfd
ATTRIBUTE_UNUSED)
#define bfd_mach_o_swap_reloc_in NULL
#define bfd_mach_o_swap_reloc_out NULL
#define bfd_mach_o_print_thread NULL
+#define bfd_mach_o_tgt_seg_table NULL
#define TARGET_NAME mach_o_be_vec
#define TARGET_STRING "mach-o-be"
diff --git a/bfd/mach-o.h b/bfd/mach-o.h
index d85224e..334b1e5 100644
--- a/bfd/mach-o.h
+++ b/bfd/mach-o.h
@@ -1,5 +1,5 @@
/* Mach-O support for BFD.
- Copyright 1999, 2000, 2001, 2002, 2003, 2005, 2007, 2008, 2009
+ Copyright 1999, 2000, 2001, 2002, 2003, 2005, 2007, 2008, 2009, 2011
Free Software Foundation, Inc.
This file is part of BFD, the Binary File Descriptor library.
@@ -70,7 +70,7 @@ bfd_mach_o_section;
typedef struct bfd_mach_o_segment_command
{
- char segname[16 + 1];
+ char segname[BFD_MACH_O_SEGNAME_SIZE + 1];
bfd_vma vmaddr;
bfd_vma vmsize;
bfd_vma fileoff;
@@ -527,15 +527,6 @@ typedef struct bfd_mach_o_xlat_name
bfd_mach_o_xlat_name;
/* Target specific routines. */
-typedef struct bfd_mach_o_backend_data
-{
- enum bfd_architecture arch;
- bfd_boolean (*_bfd_mach_o_swap_reloc_in)(arelent *,
bfd_mach_o_reloc_info *);
- bfd_boolean (*_bfd_mach_o_swap_reloc_out)(arelent *,
bfd_mach_o_reloc_info *);
- bfd_boolean (*_bfd_mach_o_print_thread)(bfd *,
bfd_mach_o_thread_flavour *,
- void *, char *);
-}
-bfd_mach_o_backend_data;
#define bfd_mach_o_get_data(abfd) ((abfd)->tdata.mach_o_data)
#define bfd_mach_o_get_backend_data(abfd) \
@@ -588,8 +579,9 @@ unsigned int bfd_mach_o_version (bfd *);
unsigned int bfd_mach_o_get_section_type_from_name (const char *);
unsigned int bfd_mach_o_get_section_attribute_from_name (const char
*);
-void bfd_mach_o_normalize_section_name (const char *, const char *,
- const char **, flagword *);
+
+void bfd_mach_o_convert_section_name_to_bfd (bfd *, const char *,
const char *,
+ const char **, flagword *);
unsigned int bfd_mach_o_section_get_nbr_indirect (bfd *,
bfd_mach_o_section *);
unsigned int bfd_mach_o_section_get_entry_size (bfd *,
bfd_mach_o_section *);
@@ -601,4 +593,38 @@ extern const bfd_mach_o_xlat_name
bfd_mach_o_section_type_name[];
extern const bfd_target mach_o_fat_vec;
+/* Interfaces between BFD names and Mach-O names. */
+
+typedef struct mach_o_section_name_xlat
+{
+ const char *bfd_name;
+ const char *mach_o_name;
+ flagword bfd_flags;
+ unsigned int macho_sectype;
+ unsigned int macho_secattr;
+ unsigned int sectalign;
+} mach_o_section_name_xlat;
+
+typedef struct mach_o_segment_name_xlat
+{
+ const char *segname;
+ const mach_o_section_name_xlat *sections;
+} mach_o_segment_name_xlat;
+
+const mach_o_section_name_xlat *
+bfd_mach_o_section_data_for_mach_sect (bfd *, const char *, const
char *);
+const mach_o_section_name_xlat *
+bfd_mach_o_section_data_for_bfd_name (bfd *, const char *, const char
**);
+
+typedef struct bfd_mach_o_backend_data
+{
+ enum bfd_architecture arch;
+ bfd_boolean (*_bfd_mach_o_swap_reloc_in)(arelent *,
bfd_mach_o_reloc_info *);
+ bfd_boolean (*_bfd_mach_o_swap_reloc_out)(arelent *,
bfd_mach_o_reloc_info *);
+ bfd_boolean (*_bfd_mach_o_print_thread)(bfd *,
bfd_mach_o_thread_flavour *,
+ void *, char *);
+ const mach_o_segment_name_xlat *segsec_names_xlat;
+}
+bfd_mach_o_backend_data;
+
#endif /* _BFD_MACH_O_H_ */
diff --git a/gas/config/obj-macho.c b/gas/config/obj-macho.c
index 5f1255d..018f653 100644
--- a/gas/config/obj-macho.c
+++ b/gas/config/obj-macho.c
@@ -1,5 +1,5 @@
/* Mach-O object file format
- Copyright 2009 Free Software Foundation, Inc.
+ Copyright 2009, 2011 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
@@ -18,6 +18,23 @@
Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
02110-1301, USA. */
+/* Here we handle the mach-o directives that are common to all
architectures.
+
+ Most significant are mach-o named sections and a variety of symbol
type
+ decorations. */
+
+/* Mach-O supports multiple, named segments each of which may contain
+ multiple named sections. Thus the concept of subsectioning is
+ handled by (say) having a __TEXT segment with appropriate flags from
+ which subsections are generated like __text, __const etc.
+
+ The well-known as short-hand section switch directives
like .text, .data
+ etc. are mapped onto predefined segment/section pairs using
facilites
+ supplied by the mach-o port of bfd.
+
+ A number of additional mach-o short-hand section switch directives
are
+ also defined. */
+
#define OBJ_HEADER "obj-macho.h"
#include "as.h"
@@ -26,6 +43,15 @@
#include "write.h"
#include "mach-o.h"
#include "mach-o/loader.h"
+#include "obj-macho.h"
+
+/* TODO: Implement "-dynamic"/"-static" command line options. */
+
+static int obj_mach_o_is_static;
+
+/* Allow for special re-ordering on output. */
+
+static int seen_objc_section;
static void
obj_mach_o_weak (int ignore ATTRIBUTE_UNUSED)
@@ -53,104 +79,172 @@ obj_mach_o_weak (int ignore ATTRIBUTE_UNUSED)
demand_empty_rest_of_line ();
}
-/* Parse:
- .section segname,sectname[,type[,attribute[,sizeof_stub]]]
-*/
+/* This will put at most 16 characters (terminated by a ',' or
newline) from
+ the input stream into dest. If there are more than 16 chars
before the
+ delimiter, a warning is given and the string is truncated. On
completion of
+ this function, input_line_pointer will point to the char after the
',' or
+ to the newline.
+
+ It trims leading and trailing space. */
+
+static int
+collect_16char_name (char *dest, const char *msg, int require_comma)
+{
+ char c, *namstart;
+
+ SKIP_WHITESPACE ();
+ namstart = input_line_pointer;
+
+ while ( (c = *input_line_pointer) != ','
+ && !is_end_of_line[(unsigned char) c])
+ input_line_pointer++;
+
+ {
+ int len = input_line_pointer - namstart; /* could be zero. */
+ /* lose any trailing space. */
+ while (len > 0 && namstart[len-1] == ' ')
+ len--;
+ if (len > 16)
+ {
+ *input_line_pointer = '\0'; /* make a temp string. */
+ as_bad (_("the %s name '%s' is too long (maximum 16 characters)"),
+ msg, namstart);
+ *input_line_pointer = c; /* restore for printing. */
+ len = 16;
+ }
+ if (len > 0)
+ memcpy (dest, namstart, len);
+ }
+
+ if (c != ',' && require_comma)
+ {
+ as_bad (_("expected a %s name followed by a `,'"), msg);
+ return 1;
+ }
+
+ return 0;
+}
+
+/* .section
+
+ The '.section' specification syntax looks like:
+ .section <segment> , <section> [, type [, attribs [, size]]]
+
+ White space is allowed everywhere between elements.
+
+ <segment> and <section> may be from 0 to 16 chars in length - they
may
+ contain spaces but leading and trailing space will be trimmed. It
is
+ mandatory that they be present (or that zero-length names are
indicated
+ by ",,").
+
+ There is only a single section type for any entry.
+
+ There may be multiple attributes, they are delimited by `+'.
+
+ Not all section types and attributes are accepted by the Darwin
system
+ assemblers as user-specifiable - although, at present, we do
here. */
static void
obj_mach_o_section (int ignore ATTRIBUTE_UNUSED)
{
char *p;
- char *segname;
- char *sectname;
char c;
- int sectype = BFD_MACH_O_S_REGULAR;
+ unsigned int sectype = BFD_MACH_O_S_REGULAR;
+ unsigned int defsectype = BFD_MACH_O_S_REGULAR;
+ unsigned int sectype_given = 0;
unsigned int secattr = 0;
+ unsigned int defsecattr = 0;
+ int secattr_given = 0;
+ unsigned int secalign = 0;
offsetT sizeof_stub = 0;
+ const mach_o_section_name_xlat * xlat;
const char *name;
flagword oldflags, flags;
asection *sec;
+ bfd_mach_o_section *msect;
+ char segname[17];
+ char sectname[17];
+ /* Zero-length segment and section names are allowed. */
/* Parse segment name. */
- if (!is_name_beginner (*input_line_pointer))
- {
- as_bad (_("missing segment name"));
- ignore_rest_of_line ();
- return;
- }
- p = input_line_pointer;
- c = get_symbol_end ();
- segname = alloca (input_line_pointer - p + 1);
- strcpy (segname, p);
- *input_line_pointer = c;
-
- if (*input_line_pointer != ',')
+ memset (segname, 0, sizeof(segname));
+ if (collect_16char_name (segname, "segment", 1))
{
- as_bad (_("missing comma after segment name"));
ignore_rest_of_line ();
return;
}
- input_line_pointer++;
+ input_line_pointer++; /* Skip the terminating ',' */
/* Parse section name. */
- if (!is_name_beginner (*input_line_pointer))
- {
- as_bad (_("missing section name"));
- ignore_rest_of_line ();
- return;
- }
- p = input_line_pointer;
- c = get_symbol_end ();
- sectname = alloca (input_line_pointer - p + 1);
- strcpy (sectname, p);
- *input_line_pointer = c;
+ memset (sectname, 0, sizeof(sectname));
+ collect_16char_name (sectname, "section", 0);
/* Parse type. */
if (*input_line_pointer == ',')
{
+ char tmpc;
+ int len;
input_line_pointer++;
- if (!is_name_beginner (*input_line_pointer))
- {
- as_bad (_("missing section type name"));
- ignore_rest_of_line ();
- return;
- }
+ SKIP_WHITESPACE ();
p = input_line_pointer;
- c = get_symbol_end ();
-
+ while ((c = *input_line_pointer) != ','
+ && !is_end_of_line[(unsigned char) c])
+ input_line_pointer++;
+
+ len = input_line_pointer - p;
+ /* strip trailing spaces. */
+ while (len > 0 && p[len-1] == ' ')
+ len--;
+ tmpc = p[len];
+
+ /* Temporarily make a string from the token. */
+ p[len] = 0;
sectype = bfd_mach_o_get_section_type_from_name (p);
- if (sectype == -1)
+ if (sectype > 255) /* Max Section ID == 255. */
{
as_bad (_("unknown or invalid section type '%s'"), p);
sectype = BFD_MACH_O_S_REGULAR;
}
- *input_line_pointer = c;
-
- /* Parse attributes. */
- if (*input_line_pointer == ',')
+ else
+ sectype_given = 1;
+ /* Restore. */
+ tmpc = p[len];
+
+ /* Parse attributes.
+ TODO: check validity of attributes for section type. */
+ if (sectype_given && c == ',')
{
do
{
int attr;
+ /* Skip initial `,' and subsequent `+'. */
input_line_pointer++;
-
- if (!is_name_beginner (*input_line_pointer))
- {
- as_bad (_("missing section attribute identifier"));
- ignore_rest_of_line ();
- break;
- }
- p = input_line_pointer;
- c = get_symbol_end ();
-
+ SKIP_WHITESPACE ();
+ p = input_line_pointer;
+ while ((c = *input_line_pointer) != '+'
+ && c != ','
+ && !is_end_of_line[(unsigned char) c])
+ input_line_pointer++;
+
+ len = input_line_pointer - p;
+ /* strip trailing spaces. */
+ while (len > 0 && p[len-1] == ' ')
+ len--;
+ tmpc = p[len];
+
+ /* Temporarily make a string from the token. */
+ p[len] ='\0';
attr = bfd_mach_o_get_section_attribute_from_name (p);
- if (attr == -1)
+ if (attr == -1)
as_bad (_("unknown or invalid section attribute
'%s'"), p);
else
- secattr |= attr;
-
- *input_line_pointer = c;
+ {
+ secattr_given = 1;
+ secattr |= attr;
+ }
+ /* Restore. */
+ p[len] = tmpc;
}
while (*input_line_pointer == '+');
@@ -160,6 +254,7 @@ obj_mach_o_section (int ignore ATTRIBUTE_UNUSED)
if (sectype != BFD_MACH_O_S_SYMBOL_STUBS)
as_bad (_("unexpected sizeof_stub expression"));
+ input_line_pointer++;
sizeof_stub = get_absolute_expression ();
}
else if (sectype == BFD_MACH_O_S_SYMBOL_STUBS)
@@ -168,8 +263,19 @@ obj_mach_o_section (int ignore ATTRIBUTE_UNUSED)
}
demand_empty_rest_of_line ();
- bfd_mach_o_normalize_section_name (segname, sectname, &name, &flags);
- if (name == NULL)
+ flags = SEC_NO_FLAGS;
+ /* This provides default bfd flags and default mach-o section type
and
+ attributes along with the canonical name. */
+ xlat = bfd_mach_o_section_data_for_mach_sect (stdoutput, segname,
sectname);
+ if (xlat != NULL)
+ {
+ name = xstrdup (xlat->bfd_name);
+ flags = xlat->bfd_flags;
+ defsectype = xlat->macho_sectype;
+ defsecattr = xlat->macho_secattr;
+ secalign = xlat->sectalign;
+ }
+ else
{
/* There is no normal BFD section name for this section.
Create one.
The name created doesn't really matter as it will never be
written
@@ -194,90 +300,368 @@ obj_mach_o_section (int ignore ATTRIBUTE_UNUSED)
sec = subseg_new (name, 0);
oldflags = bfd_get_section_flags (stdoutput, sec);
- if (oldflags == SEC_NO_FLAGS)
+ msect = bfd_mach_o_get_mach_o_section (sec);
+ if (oldflags == SEC_NO_FLAGS)
{
- bfd_mach_o_section *msect;
-
if (! bfd_set_section_flags (stdoutput, sec, flags))
as_warn (_("error setting flags for \"%s\": %s"),
bfd_section_name (stdoutput, sec),
bfd_errmsg (bfd_get_error ()));
- msect = bfd_mach_o_get_mach_o_section (sec);
strncpy (msect->segname, segname, sizeof (msect->segname));
msect->segname[16] = 0;
strncpy (msect->sectname, sectname, sizeof (msect->sectname));
msect->sectname[16] = 0;
- msect->flags = secattr | sectype;
+ msect->align = secalign;
+ if (sectype_given)
+ {
+ msect->flags = sectype;
+ if (secattr_given)
+ msect->flags |= secattr;
+ else
+ msect->flags |= defsecattr;
+ }
+ else
+ msect->flags = defsectype | defsecattr;
msect->reserved2 = sizeof_stub;
}
else if (flags != SEC_NO_FLAGS)
{
- if (flags != oldflags)
+ if (flags != oldflags
+ || msect->flags != (secattr | sectype))
as_warn (_("Ignoring changed section attributes for %s"), name);
}
}
-struct known_section
+static segT
+obj_mach_o_segT_from_bfd_name (const char *nam, int must_succeed)
{
- const char *name;
- unsigned int flags;
+ const mach_o_section_name_xlat *xlat;
+ const char *segn;
+ segT sec;
+
+ /* BFD has tables of flags and default attributes for all the
sections that
+ have a 'canonical' name. */
+ xlat = bfd_mach_o_section_data_for_bfd_name (stdoutput, nam, &segn);
+ if (xlat == NULL)
+ {
+ if (must_succeed)
+ as_fatal (_("BFD is out of sync with GAS, "
+ "unhandled well-known section type `%s'"), nam);
+ return NULL;
+ }
+
+ sec = bfd_get_section_by_name (stdoutput, nam);
+ if (sec == NULL)
+ {
+ bfd_mach_o_section *msect;
+
+ sec = subseg_force_new (xlat->bfd_name, 0);
+
+ /* Set default type, attributes and alignment. */
+ msect = bfd_mach_o_get_mach_o_section (sec);
+ msect->flags = xlat->macho_sectype | xlat->macho_secattr;
+ msect->align = xlat->sectalign;
+
+ if ((msect->flags & BFD_MACH_O_SECTION_TYPE_MASK)
+ == BFD_MACH_O_S_ZEROFILL)
+ seg_info (sec)->bss = 1;
+ }
+
+ return sec;
+}
+
+static const char * const known_sections[] =
+{
+ /* 0 */ NULL,
+ /* __TEXT */
+ /* 1 */ ".const",
+ /* 2 */ ".static_const",
+ /* 3 */ ".cstring",
+ /* 4 */ ".literal4",
+ /* 5 */ ".literal8",
+ /* 6 */ ".literal16",
+ /* 7 */ ".constructor",
+ /* 8 */ ".destructor",
+ /* 9 */ ".eh_frame",
+ /* __DATA */
+ /* 10 */ ".const_data",
+ /* 11 */ ".static_data",
+ /* 12 */ ".mod_init_func",
+ /* 13 */ ".mod_term_func",
+ /* 14 */ ".dyld",
+ /* 15 */ ".cfstring"
};
-static const struct known_section known_sections[] =
- {
- /* 0 */ { NULL, 0},
- /* 1 */ { ".cstring", BFD_MACH_O_S_CSTRING_LITERALS }
- };
+/* Interface for a known non-optional section directive. */
static void
obj_mach_o_known_section (int sect_index)
{
- const struct known_section *sect = &known_sections[sect_index];
- asection *old_sec;
- segT sec;
+ segT section;
+
+#ifdef md_flush_pending_output
+ md_flush_pending_output ();
+#endif
+
+ section = obj_mach_o_segT_from_bfd_name
(known_sections[sect_index], 1);
+ if (section != NULL)
+ subseg_set (section, 0);
+
+ /* else, we leave the section as it was; there was a fatal error
anyway. */
+}
+
+static const char * const objc_sections[] =
+{
+ /* 0 */ NULL,
+ /* 1 */ ".objc_class",
+ /* 2 */ ".objc_meta_class",
+ /* 3 */ ".objc_cat_cls_meth",
+ /* 4 */ ".objc_cat_inst_meth",
+ /* 5 */ ".objc_protocol",
+ /* 6 */ ".objc_string_object",
+ /* 7 */ ".objc_cls_meth",
+ /* 8 */ ".objc_inst_meth",
+ /* 9 */ ".objc_cls_refs",
+ /* 10 */ ".objc_message_refs",
+ /* 11 */ ".objc_symbols",
+ /* 12 */ ".objc_category",
+ /* 13 */ ".objc_class_vars",
+ /* 14 */ ".objc_instance_vars",
+ /* 15 */ ".objc_module_info",
+ /* 16 */ ".cstring", /* objc_class_names Alias for .cstring */
+ /* 17 */ ".cstring", /* Alias objc_meth_var_types for .cstring */
+ /* 18 */ ".cstring", /* objc_meth_var_names Alias for .cstring */
+ /* 19 */ ".objc_selector_strs",
+ /* 20 */ ".objc_image_info", /* extension. */
+ /* 21 */ ".objc_selector_fixup", /* extension. */
+ /* 22 */ ".objc1_class_ext", /* ObjC-1 extension. */
+ /* 23 */ ".objc1_property_list", /* ObjC-1 extension. */
+ /* 24 */ ".objc1_protocol_ext" /* ObjC-1 extension. */
+};
+
+/* This currently does the same as known_sections, but kept separate
for
+ ease of maintenance. */
+
+static void
+obj_mach_o_objc_section (int sect_index)
+{
+ segT section;
+
+#ifdef md_flush_pending_output
+ md_flush_pending_output ();
+#endif
+
+ section = obj_mach_o_segT_from_bfd_name (objc_sections[sect_index],
1);
+ if (section != NULL)
+ {
+ seen_objc_section = 1; /* We need to ensure that certain
sections are
+ present and in the right order. */
+ subseg_set (section, 0);
+ }
+
+ /* else, we leave the section as it was; there was a fatal error
anyway. */
+}
+
+/* Debug section directives. */
+
+static const char * const debug_sections[] =
+{
+ /* 0 */ NULL,
+ /* __DWARF */
+ /* 1 */ ".debug_frame",
+ /* 2 */ ".debug_info",
+ /* 3 */ ".debug_abbrev",
+ /* 4 */ ".debug_aranges",
+ /* 5 */ ".debug_macinfo",
+ /* 6 */ ".debug_line",
+ /* 7 */ ".debug_loc",
+ /* 8 */ ".debug_pubnames",
+ /* 9 */ ".debug_pubtypes",
+ /* 10 */ ".debug_str",
+ /* 11 */ ".debug_ranges",
+ /* 12 */ ".debug_macro"
+};
+
+/* ??? Maybe these should be conditional on gdwarf-*.
+ It`s also likely that we will need to be able to set them from the
cfi
+ code. */
+
+static void
+obj_mach_o_debug_section (int sect_index)
+{
+ segT section;
+
+#ifdef md_flush_pending_output
+ md_flush_pending_output ();
+#endif
+
+ section = obj_mach_o_segT_from_bfd_name
(debug_sections[sect_index], 1);
+ if (section != NULL)
+ subseg_set (section, 0);
+
+ /* else, we leave the section as it was; there was a fatal error
anyway. */
+}
+
+/* This could be moved to the tc-xx files, but there is so little
dependency
+ there, that the code might as well be shared. */
+
+struct opt_tgt_sect
+{
+ const char *name;
+ unsigned x86_val;
+ unsigned ppc_val;
+};
+
+/* The extensions here are for specific sections that are generated
by GCC
+ and Darwin system tools, but don't have directives in the `system
as'. */
+
+static const struct opt_tgt_sect tgt_sections[] =
+{
+ /* 0 */ { NULL, 0, 0},
+ /* 1 */ { ".lazy_symbol_pointer", 0, 0},
+ /* 2 */ { ".lazy_symbol_pointer2", 0, 0}, /* X86 - extension */
+ /* 3 */ { ".lazy_symbol_pointer3", 0, 0}, /* X86 - extension */
+ /* 4 */ { ".non_lazy_symbol_pointer", 0, 0},
+ /* 5 */ { ".non_lazy_symbol_pointer_x86", 0, 0}, /* X86 -
extension */
+ /* 6 */ { ".symbol_stub", 16, 20},
+ /* 7 */ { ".symbol_stub1", 0, 16}, /* PPC - extension */
+ /* 8 */ { ".picsymbol_stub", 26, 36},
+ /* 9 */ { ".picsymbol_stub1", 0, 32}, /* PPC - extension */
+ /* 10 */ { ".picsymbol_stub2", 25, 0}, /* X86 - extension */
+ /* 11 */ { ".picsymbol_stub3", 5, 0}, /* X86 - extension */
+};
+
+/* Interface for an optional section directive. */
+
+static void
+obj_mach_o_opt_tgt_section (int sect_index)
+{
+ const struct opt_tgt_sect *tgtsct = &tgt_sections[sect_index];
+ segT section;
#ifdef md_flush_pending_output
md_flush_pending_output ();
#endif
- old_sec = bfd_get_section_by_name (stdoutput, sect->name);
- if (old_sec)
+ section = obj_mach_o_segT_from_bfd_name (tgtsct->name, 0);
+ if (section == NULL)
{
- /* Section already present. */
- sec = old_sec;
- subseg_set (sec, 0);
+ as_bad (_("%s is not used for the selected target"), tgtsct-
>name);
+ /* Leave the section as it is. */
}
else
{
- bfd_mach_o_section *msect;
+ bfd_mach_o_section *mo_sec = bfd_mach_o_get_mach_o_section
(section);
+ subseg_set (section, 0);
+#if defined (TC_I386)
+ mo_sec->reserved2 = tgtsct->x86_val;
+#elif defined (TC_PPC)
+ mo_sec->reserved2 = tgtsct->ppc_val;
+#else
+ mo_sec->reserved2 = 0;
+#endif
+ }
+}
- sec = subseg_force_new (sect->name, 0);
+/* We don't necessarily have the three 'base' sections on mach-o.
+ Normally, we would start up with only the 'text' section defined.
+ However, even that can be suppressed with (TODO) c/l option "-n".
+ Thus, we have to be able to create all three sections on-demand. */
- /* Set default flags. */
- msect = bfd_mach_o_get_mach_o_section (sec);
- msect->flags = sect->flags;
+static void
+obj_mach_o_base_section (int sect_index)
+{
+ segT section;
+
+#ifdef md_flush_pending_output
+ md_flush_pending_output ();
+#endif
+
+ /* We don't support numeric (or any other) qualifications on the
+ well-known section shorthands. */
+ demand_empty_rest_of_line ();
+
+ switch (sect_index)
+ {
+ /* Handle the three sections that are globally known within GAS.
+ For Mach-O, these are created on demand rather than at startup. */
+ case 1:
+ if (text_section == NULL)
+ text_section = obj_mach_o_segT_from_bfd_name (TEXT_SECTION_NAME, 1);
+ if (obj_mach_o_is_static)
+ {
+ bfd_mach_o_section *mo_sec
+ = bfd_mach_o_get_mach_o_section (text_section);
+ mo_sec->flags &= ~BFD_MACH_O_S_ATTR_PURE_INSTRUCTIONS;
+ }
+ section = text_section;
+ break;
+ case 2:
+ if (data_section == NULL)
+ data_section = obj_mach_o_segT_from_bfd_name (DATA_SECTION_NAME, 1);
+ section = data_section;
+ break;
+ case 3:
+ /* ??? maybe this achieves very little, as an addition. */
+ if (bss_section == NULL)
+ {
+ bss_section = obj_mach_o_segT_from_bfd_name (BSS_SECTION_NAME, 1);
+ seg_info (bss_section)->bss = 1;
+ }
+ section = bss_section;
+ break;
+ default:
+ as_fatal (_("internal error: base section index out of
range"));
+ return;
+ break;
}
+ subseg_set (section, 0);
}
-/* Called from read.c:s_comm after we've parsed .comm symbol, size.
- Parse a possible alignment value. */
+/* This finishes off parsing a .comm or .lcomm statement, which both
can have
+ an (optional) alignment field. It also allows us to create the
bss section
+ on demand. */
static symbolS *
-obj_mach_o_common_parse (int ignore ATTRIBUTE_UNUSED,
- symbolS *symbolP, addressT size)
+obj_mach_o_common_parse (int is_local, symbolS *symbolP,
+ addressT size)
{
addressT align = 0;
+ /* Both comm and lcomm take an optional alignment, as a power
+ of two between 1 and 15. */
if (*input_line_pointer == ',')
{
+ /* We expect a power of 2. */
align = parse_align (0);
if (align == (addressT) -1)
return NULL;
+ if (align > 15)
+ {
+ as_warn (_("Alignment (%lu) too large: 15 assumed."),
+ (unsigned long)align);
+ align = 15;
+ }
}
- S_SET_VALUE (symbolP, size);
- S_SET_EXTERNAL (symbolP);
- S_SET_SEGMENT (symbolP, bfd_com_section_ptr);
+ if (is_local)
+ {
+ /* Create the BSS section on demand. */
+ if (bss_section == NULL)
+ {
+ bss_section = obj_mach_o_segT_from_bfd_name (BSS_SECTION_NAME, 1);
+ seg_info (bss_section)->bss = 1;
+ }
+ bss_alloc (symbolP, size, align);
+ S_CLEAR_EXTERNAL (symbolP);
+ }
+ else
+ {
+ S_SET_VALUE (symbolP, size);
+ S_SET_ALIGN (symbolP, align);
+ S_SET_EXTERNAL (symbolP);
+ S_SET_SEGMENT (symbolP, bfd_com_section_ptr);
+ }
symbol_get_bfdsym (symbolP)->flags |= BSF_OBJECT;
@@ -285,9 +669,9 @@ obj_mach_o_common_parse (int ignore
ATTRIBUTE_UNUSED,
}
static void
-obj_mach_o_comm (int ignore ATTRIBUTE_UNUSED)
+obj_mach_o_comm (int is_local)
{
- s_comm_internal (ignore, obj_mach_o_common_parse);
+ s_comm_internal (is_local, obj_mach_o_common_parse);
}
static void
@@ -297,13 +681,101 @@ obj_mach_o_subsections_via_symbols (int arg
ATTRIBUTE_UNUSED)
demand_empty_rest_of_line ();
}
+/* Dummy function to allow test-code to work while we are working
+ on things. */
+
+static void
+obj_mach_o_placeholder (int arg ATTRIBUTE_UNUSED)
+{
+ ignore_rest_of_line ();
+}
+
const pseudo_typeS mach_o_pseudo_table[] =
{
- { "weak", obj_mach_o_weak, 0},
- { "section", obj_mach_o_section, 0},
- { "cstring", obj_mach_o_known_section, 1},
- { "lcomm", s_lcomm, 1 },
+ /* Section directives. */
{ "comm", obj_mach_o_comm, 0 },
+ { "lcomm", obj_mach_o_comm, 1 },
+
+ { "text", obj_mach_o_base_section, 1},
+ { "data", obj_mach_o_base_section, 2},
+ { "bss", obj_mach_o_base_section, 3}, /* extension */
+
+ { "const", obj_mach_o_known_section, 1},
+ { "static_const", obj_mach_o_known_section, 2},
+ { "cstring", obj_mach_o_known_section, 3},
+ { "literal4", obj_mach_o_known_section, 4},
+ { "literal8", obj_mach_o_known_section, 5},
+ { "literal16", obj_mach_o_known_section, 6},
+ { "constructor", obj_mach_o_known_section, 7},
+ { "destructor", obj_mach_o_known_section, 8},
+ { "eh_frame", obj_mach_o_known_section, 9},
+
+ { "const_data", obj_mach_o_known_section, 10},
+ { "static_data", obj_mach_o_known_section, 11},
+ { "mod_init_func", obj_mach_o_known_section, 12},
+ { "mod_term_func", obj_mach_o_known_section, 13},
+ { "dyld", obj_mach_o_known_section, 14},
+ { "cfstring", obj_mach_o_known_section, 15},
+
+ { "objc_class", obj_mach_o_objc_section, 1},
+ { "objc_meta_class", obj_mach_o_objc_section, 2},
+ { "objc_cat_cls_meth", obj_mach_o_objc_section, 3},
+ { "objc_cat_inst_meth", obj_mach_o_objc_section, 4},
+ { "objc_protocol", obj_mach_o_objc_section, 5},
+ { "objc_string_object", obj_mach_o_objc_section, 6},
+ { "objc_cls_meth", obj_mach_o_objc_section, 7},
+ { "objc_inst_meth", obj_mach_o_objc_section, 8},
+ { "objc_cls_refs", obj_mach_o_objc_section, 9},
+ { "objc_message_refs", obj_mach_o_objc_section, 10},
+ { "objc_symbols", obj_mach_o_objc_section, 11},
+ { "objc_category", obj_mach_o_objc_section, 12},
+ { "objc_class_vars", obj_mach_o_objc_section, 13},
+ { "objc_instance_vars", obj_mach_o_objc_section, 14},
+ { "objc_module_info", obj_mach_o_objc_section, 15},
+ { "objc_class_names", obj_mach_o_objc_section, 16}, /* Alias
for .cstring */
+ { "objc_meth_var_types", obj_mach_o_objc_section, 17}, /* Alias
for .cstring */
+ { "objc_meth_var_names", obj_mach_o_objc_section, 18}, /* Alias
for .cstring */
+ { "objc_selector_strs", obj_mach_o_objc_section, 19},
+ { "objc_image_info", obj_mach_o_objc_section, 20}, /* extension. */
+ { "objc_selector_fixup", obj_mach_o_objc_section, 21}, /*
extension. */
+ { "objc1_class_ext", obj_mach_o_objc_section, 22}, /* ObjC-1
extension. */
+ { "objc1_property_list", obj_mach_o_objc_section, 23}, /* ObjC-1
extension. */
+ { "objc1_protocol_ext", obj_mach_o_objc_section, 24}, /* ObjC-1
extension. */
+
+ { "debug_frame", obj_mach_o_debug_section, 1}, /* extension. */
+ { "debug_info", obj_mach_o_debug_section, 2}, /* extension. */
+ { "debug_abbrev", obj_mach_o_debug_section, 3}, /* extension. */
+ { "debug_aranges", obj_mach_o_debug_section, 4}, /* extension. */
+ { "debug_macinfo", obj_mach_o_debug_section, 5}, /* extension. */
+ { "debug_line", obj_mach_o_debug_section, 6}, /* extension. */
+ { "debug_loc", obj_mach_o_debug_section, 7}, /* extension. */
+ { "debug_pubnames", obj_mach_o_debug_section, 8}, /* extension. */
+ { "debug_pubtypes", obj_mach_o_debug_section, 9}, /* extension. */
+ { "debug_str", obj_mach_o_debug_section, 10}, /* extension. */
+ { "debug_ranges", obj_mach_o_debug_section, 11}, /* extension. */
+ { "debug_macro", obj_mach_o_debug_section, 12}, /* extension. */
+
+ { "lazy_symbol_pointer", obj_mach_o_opt_tgt_section, 1},
+ { "lazy_symbol_pointer2", obj_mach_o_opt_tgt_section, 2}, /*
extension. */
+ { "lazy_symbol_pointer3", obj_mach_o_opt_tgt_section, 3}, /*
extension. */
+ { "non_lazy_symbol_pointer", obj_mach_o_opt_tgt_section, 4},
+ { "non_lazy_symbol_pointer_x86", obj_mach_o_opt_tgt_section, 5}, /*
extension. */
+ { "symbol_stub", obj_mach_o_opt_tgt_section, 6},
+ { "symbol_stub1", obj_mach_o_opt_tgt_section, 7}, /* extension. */
+ { "picsymbol_stub", obj_mach_o_opt_tgt_section, 8}, /* extension. */
+ { "picsymbol_stub1", obj_mach_o_opt_tgt_section, 9}, /* extension.
*/
+ { "picsymbol_stub2", obj_mach_o_opt_tgt_section, 4}, /* extension.
*/
+ { "picsymbol_stub3", obj_mach_o_opt_tgt_section, 4}, /* extension.
*/
+
+ { "section", obj_mach_o_section, 0},
+
+ /* Symbol-related. */
+ { "indirect_symbol", obj_mach_o_placeholder, 0},
+ { "weak_definition", obj_mach_o_placeholder, 0},
+ { "private_extern", obj_mach_o_placeholder, 0},
+ { "weak", obj_mach_o_weak, 0}, /* extension */
+
+ /* File flags. */
{ "subsections_via_symbols", obj_mach_o_subsections_via_symbols,
0 },
{NULL, NULL, 0}
diff --git a/gas/config/obj-macho.h b/gas/config/obj-macho.h
index d7e9bda..94c1cde 100644
--- a/gas/config/obj-macho.h
+++ b/gas/config/obj-macho.h
@@ -1,5 +1,5 @@
/* Mach-O object file format for gas, the assembler.
- Copyright 2009 Free Software Foundation, Inc.
+ Copyright 2009, 2011 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
@@ -18,13 +18,29 @@
Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
02110-1301, USA. */
+#ifndef _OBJ_MACH_O_H
+#define _OBJ_MACH_O_H
+
/* Tag to validate Mach-O object file format processing */
#define OBJ_MACH_O 1
+#include "bfd/mach-o.h"
+
#include "targ-cpu.h"
#define OUTPUT_FLAVOR bfd_target_mach_o_flavour
+/* All our align expressions are power of two. */
+#define USE_ALIGN_PTWO
+
+/* Common symbols can carry alignment information. */
+#ifndef S_SET_ALIGN
+#define S_SET_ALIGN(S,V) do {\
+ bfd_mach_o_asymbol *s = (bfd_mach_o_asymbol *) symbol_get_bfdsym
(S);\
+ s->n_desc = (s->n_desc & 0xf0ff) | (((V) & 0x0f) << 8);\
+} while (0)
+#endif
+
extern const pseudo_typeS mach_o_pseudo_table[];
#ifndef obj_pop_insert
@@ -37,3 +53,5 @@ extern const pseudo_typeS mach_o_pseudo_table[];
#define obj_symbol_new_hook(s) {;}
#define EMIT_SECTION_SYMBOLS 0
+
+#endif /* _OBJ_MACH_O_H */
diff --git a/include/mach-o/loader.h b/include/mach-o/loader.h
index 357f65e..296782f 100644
--- a/include/mach-o/loader.h
+++ b/include/mach-o/loader.h
@@ -246,6 +246,9 @@ bfd_mach_o_section_type;
typedef enum bfd_mach_o_section_attribute
{
+ /* Section has no specified attibutes. */
+ BFD_MACH_O_S_ATTR_NONE = 0,
+
/* Section has local relocation entries. */
BFD_MACH_O_S_ATTR_LOC_RELOC = 0x00000100,
More information about the Binutils
mailing list