[binutils-gdb] MIPS: Correct Toshiba TX39 MADD/MADDU HI/LO instruction flags

Maciej W. Rozycki macro@sourceware.org
Sun Nov 15 11:11:53 GMT 2026


https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=f4e41bbd789ebdf105dd4f95b44e7ea1cdd8872c

commit f4e41bbd789ebdf105dd4f95b44e7ea1cdd8872c
Author: Maciej W. Rozycki <macro@orcam.me.uk>
Date:   Sun Nov 15 10:53:38 2026 +0000

    MIPS: Correct Toshiba TX39 MADD/MADDU HI/LO instruction flags
    
    Toshiba TX39 integer multiply-add instructions suffer from a pipeline
    hazard on the HI and LO registers[1]:
    
    "The value of the HI and LO registers are undefined for the two
    instructions immediately preceding a DIV or DIVU instruction.
    Accordingly, do not place a DIV or DIVU instruction as the next
    or next-but-one instruction after a MADD, MADDU, MFHI, or MFLO
    instruction that reads the HI or LO registers."
    
    This is further asserted in the instruction list for MADD[2]:
    
    "To guarantee correct operation even if an interrupt occurs, neither of
    the two instructions following MADD should be DIV or DIVU instructions
    which modify the HI and LO register contents."
    
    and similarly for MADDU[3].
    
    In GAS we already handle this hazard correctly in `insns_between', which
    works for MFHI and MFLO instructions via their INSN_READ_HI/INSN_READ_LO
    flags, however TX39 MADD and MADDU instructions only have INSN_WRITE_HI
    and INSN_WRITE_LO flags set.  Consequently the hazard is not observed.
    
    Add the missing INSN_READ_HI/INSN_READ_LO flags then across the family,
    so as to cause extra NOP instructions to be emitted as required to move
    the instructions affected apart.  Add test coverage.
    
    References:
    
    [1] "32-Bit TX System RISC TX39 Family Architecture", Toshiba
        Corporation, Document Number 44137D-0001, Volume "Architecture",
        Section 4.9 "Restrictions on Instruction Placement", p. 4-9
    
    [2] same, Appendix A "Instruction Set Details", p. A-60
    
    [3] same, p. A-61

Diff:
---
 gas/testsuite/gas/mips/madd.d   | 24 ++++++++++++++++++++++++
 gas/testsuite/gas/mips/madd.s   | 14 ++++++++++++++
 gas/testsuite/gas/mips/mips.exp |  4 ++++
 opcodes/mips-opc.c              |  8 ++++----
 4 files changed, 46 insertions(+), 4 deletions(-)

diff --git a/gas/testsuite/gas/mips/madd.d b/gas/testsuite/gas/mips/madd.d
new file mode 100644
index 00000000000..4c6371feb14
--- /dev/null
+++ b/gas/testsuite/gas/mips/madd.d
@@ -0,0 +1,24 @@
+#as: -32
+#objdump: -drz --prefix-addresses --show-raw-insn
+#name: MIPS integer multiply-add hazard
+
+.*: +file format .*mips.*
+
+Disassembly of section \.text:
+[0-9a-f]+ <[^>]*> 70850000 	madd	a0,a1
+[0-9a-f]+ <[^>]*> 00000000 	nop
+[0-9a-f]+ <[^>]*> 00000000 	nop
+[0-9a-f]+ <[^>]*> 00c7001a 	div	zero,a2,a3
+[0-9a-f]+ <[^>]*> 70851000 	madd	v0,a0,a1
+[0-9a-f]+ <[^>]*> 00000000 	nop
+[0-9a-f]+ <[^>]*> 00000000 	nop
+[0-9a-f]+ <[^>]*> 00c7001a 	div	zero,a2,a3
+[0-9a-f]+ <[^>]*> 70850001 	maddu	a0,a1
+[0-9a-f]+ <[^>]*> 00000000 	nop
+[0-9a-f]+ <[^>]*> 00000000 	nop
+[0-9a-f]+ <[^>]*> 00c7001b 	divu	zero,a2,a3
+[0-9a-f]+ <[^>]*> 70851001 	maddu	v0,a0,a1
+[0-9a-f]+ <[^>]*> 00000000 	nop
+[0-9a-f]+ <[^>]*> 00000000 	nop
+[0-9a-f]+ <[^>]*> 00c7001b 	divu	zero,a2,a3
+#pass
diff --git a/gas/testsuite/gas/mips/madd.s b/gas/testsuite/gas/mips/madd.s
new file mode 100644
index 00000000000..c80eef0a9e9
--- /dev/null
+++ b/gas/testsuite/gas/mips/madd.s
@@ -0,0 +1,14 @@
+# Source file used to test the integer multiply-add hazard.
+
+	.text
+	.ent	foo
+foo:
+	madd	$4, $5
+	div	$0, $6, $7
+	madd	$2, $4, $5
+	div	$0, $6, $7
+	maddu	$4, $5
+	divu	$0, $6, $7
+	maddu	$2, $4, $5
+	divu	$0, $6, $7
+	.end	foo
diff --git a/gas/testsuite/gas/mips/mips.exp b/gas/testsuite/gas/mips/mips.exp
index d9aeb1138ef..d957396bc70 100644
--- a/gas/testsuite/gas/mips/mips.exp
+++ b/gas/testsuite/gas/mips/mips.exp
@@ -893,6 +893,10 @@ if { [istarget mips*-*-vxworks*] } {
     run_dump_test "lifloat"
     run_dump_test "lif-svr4pic"
     run_dump_test "lif-xgot"
+
+    run_dump_test "madd"		[list [list name (r3900)] \
+					      [list as "-march=r3900"]]
+
     run_dump_test_arches "mips4"	[mips_arch_list_matching mips4]
     run_dump_test_arches "mips4-fp" "-32" \
 					[mips_arch_list_matching fpisa4]
diff --git a/opcodes/mips-opc.c b/opcodes/mips-opc.c
index 1d7d72ae0a7..5479f4ea771 100644
--- a/opcodes/mips-opc.c
+++ b/opcodes/mips-opc.c
@@ -1375,18 +1375,18 @@ const struct mips_opcode mips_builtin_opcodes[] =
 {"madd.ps",		"D,S,T",	0x72c00018, 0xffe0003f,	WR_1|RD_2|RD_3|FP_D,	     0,		IL2F,		0,	0 },
 {"madd",		"s,t",		0x0000001c, 0xfc00ffff, RD_1|RD_2|WR_HILO,           0,		L1|ALX,		0,	0 },
 {"madd",		"s,t",		0x70000000, 0xfc00ffff, RD_1|RD_2|MOD_HILO,          0,		I32|N55,	0,	I37 },
-{"madd",		"s,t",		0x70000000, 0xfc00ffff, RD_1|RD_2|WR_HILO|IS_M,      0,		G1,		0,	0 },
+{"madd",		"s,t",		0x70000000, 0xfc00ffff, RD_1|RD_2|MOD_HILO|IS_M, 0,		G1,		0,	0 },
 {"madd",		"7,s,t",	0x70000000, 0xfc00e7ff, RD_2|RD_3|MOD_a,             0,         0,		D32,	0 },
-{"madd",		"d,s,t",	0x70000000, 0xfc0007ff, WR_1|RD_2|RD_3|WR_HILO|IS_M, 0,		G1,		0,	0 },
+{"madd",		"d,s,t",	0x70000000, 0xfc0007ff, WR_1|RD_2|RD_3|MOD_HILO|IS_M, 0,	G1,		0,	0 },
 {"madd1",		"s,t",		0x70000020, 0xfc00ffff, RD_1|RD_2|WR_HILO|IS_M,      0,		EE,		0,	0 },
 {"madd1",		"d,s,t",	0x70000020, 0xfc0007ff, WR_1|RD_2|RD_3|WR_HILO|IS_M, 0,		EE,		0,	0 },
 {"madda.s",		"S,T",		0x4600001e, 0xffe007ff, RD_1|RD_2|FP_S,		     0,		EE,		0,	0 },
 {"maddp",		"s,t",		0x70000441, 0xfc00ffff,	RD_1|RD_2|MOD_HILO,	     0,		0,		SMT,	0 },
 {"maddu",		"s,t",		0x0000001d, 0xfc00ffff, RD_1|RD_2|WR_HILO,           0,		L1|ALX,		0,	0 },
 {"maddu",		"s,t",		0x70000001, 0xfc00ffff, RD_1|RD_2|MOD_HILO,          0,		I32|N55,	0,	I37 },
-{"maddu",		"s,t",		0x70000001, 0xfc00ffff, RD_1|RD_2|WR_HILO|IS_M,      0,		G1,		0,	0 },
+{"maddu",		"s,t",		0x70000001, 0xfc00ffff, RD_1|RD_2|MOD_HILO|IS_M, 0,		G1,		0,	0 },
 {"maddu",		"7,s,t",	0x70000001, 0xfc00e7ff, RD_2|RD_3|MOD_a,             0,         0,		D32,	0 },
-{"maddu",		"d,s,t",	0x70000001, 0xfc0007ff, WR_1|RD_2|RD_3|WR_HILO|IS_M, 0,		G1,		0,	0 },
+{"maddu",		"d,s,t",	0x70000001, 0xfc0007ff, WR_1|RD_2|RD_3|MOD_HILO|IS_M, 0,	G1,		0,	0 },
 {"maddu1",		"s,t",		0x70000021, 0xfc00ffff, RD_1|RD_2|WR_HILO|IS_M,      0,		EE,		0,	0 },
 {"maddu1",		"d,s,t",	0x70000021, 0xfc0007ff, WR_1|RD_2|RD_3|WR_HILO|IS_M, 0,		EE,		0,	0 },
 {"madd16",		"s,t",		0x00000028, 0xfc00ffff, RD_1|RD_2|MOD_HILO,	0,		N411,		0,	0 },


More information about the Binutils-cvs mailing list