This is the mail archive of the libc-alpha@sourceware.org mailing list for the glibc project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: [PATCH] resolv: Always set *resplen2 out parameter in send_dg [BZ #19791]


This is the new patch.

It sets *resplen2 strictly before each return (except for the success
case).  I have convinced myself that this does not alter any correct
cases.  If send_dg does not return 0

I have a companion patch for send_vc (bug 19825) which I still need to
submit.

I ran the external resolver test suite, apart from a tst-partial-fail
failure due to libresolv's newly found ability to find non-broken
responses, there are no failures.

Thanks,
Florian

Since commit 44d20bca52ace85850012b0ead37b360e3ecd96e (Implement
second fallback mode for DNS requests), there is a code path which
returns early, before *resplen2 is initialized.  This happens if the
name server address is immediately recognized as invalid (because of
lack of protocol support, or if it is a broadcast address such
255.255.255.255, or another invalid address).

If this happens and *resplen2 was non-zero (which is the case if a
previous query resulted in a failure), __libc_res_nquery would reuse
an existing second answer buffer.  This answer has been previously
identified as unusable (for example, it could be an NXDOMAIN
response).  Due to the presence of a second answer, no name server
switching will occur.  The result is a name resolution failure,
although a successful resolution would have been possible if name
servers have been switched and queries had proceeded along the search
path.

The above paragraph still simplifies the situation.  Before glibc
2.23, if the second answer needed malloc, the stub resolver would
still attempt to reuse the second answer, but this is not possible
because __libc_res_nsearch has freed it, after the unsuccessful call
to __libc_res_nquerydomain, and set the buffer pointer to NULL.  This
eventually leads to an assertion failure in __libc_res_nquery:

	/* Make sure both hp and hp2 are defined */
	assert((hp != NULL) && (hp2 != NULL));

If assertions are disabled, the consequence is a NULL pointer
dereference on the next line.

Starting with glibc 2.23, as a result of commit
e9db92d3acfe1822d56d11abcea5bfc4c41cf6ca (CVE-2015-7547: getaddrinfo()
stack-based buffer overflow (Bug 18665)), the second answer is always
allocated with malloc.  This means that the assertion failure happens
with small responses as well because there is no buffer to reuse, as
soon as there is a name resolution failure which triggers a search for
an answer along the search path.

This commit addresses the issue by ensuring that *resplen2 is
initialized before the send_dg function returns.

This commit also addresses a bug where an invalid second reply is
incorrectly returned as a valid to the caller.

2016-03-23  Florian Weimer  <fweimer@redhat.com>

	[BZ #19791]
	* resolv/res_send.c (close_and_return_error): New function.
	(send_dg): Initialize *resplen2 after reopen failure.  Call
	close_and_return_error for error returns.  On error paths without
	__res_iclose, initialze *resplen2 explicitly.  Update comment for
	successful return.

diff --git a/resolv/res_send.c b/resolv/res_send.c
index 25c19f1..b4efcb6 100644
--- a/resolv/res_send.c
+++ b/resolv/res_send.c
@@ -649,6 +649,18 @@ get_nsaddr (res_state statp, int n)
     return (struct sockaddr *) (void *) &statp->nsaddr_list[n];
 }
 
+/* Close the resolver structure, assign zero to *RESPLEN2 if RESPLEN2
+   is not NULL, and return zero.  */
+static int
+__attribute__ ((warn_unused_result))
+close_and_return_error (res_state statp, int *resplen2)
+{
+  __res_iclose(statp, false);
+  if (resplen2 != NULL)
+    *resplen2 = 0;
+  return 0;
+}
+
 /* The send_vc function is responsible for sending a DNS query over TCP
    to the nameserver numbered NS from the res_state STATP i.e.
    EXT(statp).nssocks[ns].  The function supports sending both IPv4 and
@@ -1114,7 +1126,11 @@ send_dg(res_state statp,
  retry_reopen:
 	retval = reopen (statp, terrno, ns);
 	if (retval <= 0)
-		return retval;
+	  {
+	    if (resplen2 != NULL)
+	      *resplen2 = 0;
+	    return retval;
+	  }
  retry:
 	evNowTime(&now);
 	evConsTime(&timeout, seconds, 0);
@@ -1127,8 +1143,6 @@ send_dg(res_state statp,
 	int recvresp2 = buf2 == NULL;
 	pfd[0].fd = EXT(statp).nssocks[ns];
 	pfd[0].events = POLLOUT;
-	if (resplen2 != NULL)
-	  *resplen2 = 0;
  wait:
 	if (need_recompute) {
 	recompute_resend:
@@ -1136,9 +1150,7 @@ send_dg(res_state statp,
 		if (evCmpTime(finish, now) <= 0) {
 		poll_err_out:
 			Perror(statp, stderr, "poll", errno);
-		err_out:
-			__res_iclose(statp, false);
-			return (0);
+			return close_and_return_error (statp, resplen2);
 		}
 		evSubTime(&timeout, &finish, &now);
 		need_recompute = 0;
@@ -1185,7 +1197,9 @@ send_dg(res_state statp,
 		  }
 
 		*gotsomewhere = 1;
-		return (0);
+		if (resplen2 != NULL)
+		  *resplen2 = 0;
+		return 0;
 	}
 	if (n < 0) {
 		if (errno == EINTR)
@@ -1253,7 +1267,7 @@ send_dg(res_state statp,
 
 		      fail_sendmmsg:
 			Perror(statp, stderr, "sendmmsg", errno);
-			goto err_out;
+			return close_and_return_error (statp, resplen2);
 		      }
 		  }
 		else
@@ -1271,7 +1285,7 @@ send_dg(res_state statp,
 		      if (errno == EINTR || errno == EAGAIN)
 			goto recompute_resend;
 		      Perror(statp, stderr, "send", errno);
-		      goto err_out;
+		      return close_and_return_error (statp, resplen2);
 		    }
 		  just_one:
 		    if (nwritten != 0 || buf2 == NULL || single_request)
@@ -1349,7 +1363,7 @@ send_dg(res_state statp,
 				goto wait;
 			}
 			Perror(statp, stderr, "recvfrom", errno);
-			goto err_out;
+			return close_and_return_error (statp, resplen2);
 		}
 		*gotsomewhere = 1;
 		if (__glibc_unlikely (*thisresplenp < HFIXEDSZ))       {
@@ -1360,7 +1374,7 @@ send_dg(res_state statp,
 			       (stdout, ";; undersized: %d\n",
 				*thisresplenp));
 			*terrno = EMSGSIZE;
-			goto err_out;
+			return close_and_return_error (statp, resplen2);
 		}
 		if ((recvresp1 || hp->id != anhp->id)
 		    && (recvresp2 || hp2->id != anhp->id)) {
@@ -1409,7 +1423,7 @@ send_dg(res_state statp,
 				? *thisanssizp : *thisresplenp);
 			/* record the error */
 			statp->_flags |= RES_F_EDNS0ERR;
-			goto err_out;
+			return close_and_return_error (statp, resplen2);
 	}
 #endif
 		if (!(statp->options & RES_INSECURE2)
@@ -1461,10 +1475,10 @@ send_dg(res_state statp,
 			    goto wait;
 			  }
 
-			__res_iclose(statp, false);
 			/* don't retry if called from dig */
 			if (!statp->pfcode)
-				return (0);
+			  return close_and_return_error (statp, resplen2);
+			__res_iclose(statp, false);
 		}
 		if (anhp->rcode == NOERROR && anhp->ancount == 0
 		    && anhp->aa == 0 && anhp->ra == 0 && anhp->arcount == 0) {
@@ -1486,6 +1500,8 @@ send_dg(res_state statp,
 			__res_iclose(statp, false);
 			// XXX if we have received one reply we could
 			// XXX use it and not repeat it over TCP...
+			if (resplen2 != NULL)
+			  *resplen2 = 0;
 			return (1);
 		}
 		/* Mark which reply we received.  */
@@ -1501,21 +1517,22 @@ send_dg(res_state statp,
 					__res_iclose (statp, false);
 					retval = reopen (statp, terrno, ns);
 					if (retval <= 0)
-						return retval;
+					  {
+					    if (resplen2 != NULL)
+					      *resplen2 = 0;
+					    return retval;
+					  }
 					pfd[0].fd = EXT(statp).nssocks[ns];
 				}
 			}
 			goto wait;
 		}
-		/*
-		 * All is well, or the error is fatal.  Signal that the
-		 * next nameserver ought not be tried.
-		 */
+		/* All is well.  We have received both responses (if
+		   two responses were requested).  */
 		return (resplen);
-	} else if (pfd[0].revents & (POLLERR | POLLHUP | POLLNVAL)) {
-		/* Something went wrong.  We can stop trying.  */
-		goto err_out;
-	}
+	} else if (pfd[0].revents & (POLLERR | POLLHUP | POLLNVAL))
+	  /* Something went wrong.  We can stop trying.  */
+	  return close_and_return_error (statp, resplen2);
 	else {
 		/* poll should not have returned > 0 in this case.  */
 		abort ();

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]