This is the mail archive of the
glibc-cvs@sourceware.org
mailing list for the glibc project.
GNU C Library master sources branch master updated. glibc-2.29.9000-5-g5fc9ed4
- From: carlos at sourceware dot org
- To: glibc-cvs at sourceware dot org
- Date: 1 Feb 2019 01:48:13 -0000
- Subject: GNU C Library master sources branch master updated. glibc-2.29.9000-5-g5fc9ed4
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU C Library master sources".
The branch, master has been updated
via 5fc9ed4c4058bfbdf51ad6e7aac7d209b580e8c4 (commit)
from 932329a5134665bfad601a8709da2602d943fc38 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://sourceware.org/git/gitweb.cgi?p=glibc.git;a=commitdiff;h=5fc9ed4c4058bfbdf51ad6e7aac7d209b580e8c4
commit 5fc9ed4c4058bfbdf51ad6e7aac7d209b580e8c4
Author: Carlos O'Donell <carlos@redhat.com>
Date: Mon Jan 21 22:50:12 2019 -0500
nptl: Fix pthread_rwlock_try*lock stalls (Bug 23844)
For a full analysis of both the pthread_rwlock_tryrdlock() stall
and the pthread_rwlock_trywrlock() stall see:
https://sourceware.org/bugzilla/show_bug.cgi?id=23844#c14
In the pthread_rwlock_trydlock() function we fail to inspect for
PTHREAD_RWLOCK_FUTEX_USED in __wrphase_futex and wake the waiting
readers.
In the pthread_rwlock_trywrlock() function we write 1 to
__wrphase_futex and loose the setting of the PTHREAD_RWLOCK_FUTEX_USED
bit, again failing to wake waiting readers during unlock.
The fix in the case of pthread_rwlock_trydlock() is to check for
PTHREAD_RWLOCK_FUTEX_USED and wake the readers.
The fix in the case of pthread_rwlock_trywrlock() is to only write
1 to __wrphase_futex if we installed the write phase, since all other
readers would be spinning waiting for this step.
We add two new tests, one exercises the stall for
pthread_rwlock_trywrlock() which is easy to exercise, and one exercises
the stall for pthread_rwlock_trydlock() which is harder to exercise.
The pthread_rwlock_trywrlock() test fails consistently without the fix,
and passes after. The pthread_rwlock_tryrdlock() test fails roughly
5-10% of the time without the fix, and passes all the time after.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: Torvald Riegel <triegel@redhat.com>
Signed-off-by: Rik Prohaska <prohaska7@gmail.com>
Co-authored-by: Torvald Riegel <triegel@redhat.com>
Co-authored-by: Rik Prohaska <prohaska7@gmail.com>
diff --git a/ChangeLog b/ChangeLog
index d085cdb..59e5e11 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,20 @@
+2019-01-31 Carlos O'Donell <carlos@redhat.com>
+ Torvald Riegel <triegel@redhat.com>
+ Rik Prohaska <prohaska7@gmail.com>
+
+ [BZ# 23844]
+ * nptl/Makefile (tests): Add tst-rwlock-tryrdlock-stall, and
+ tst-rwlock-trywrlock-stall.
+ * nptl/pthread_rwlock_tryrdlock.c (__pthread_rwlock_tryrdlock):
+ Wake waiters if PTHREAD_RWLOCK_FUTEX_USED is set.
+ * nptl/pthread_rwlock_trywrlock.c (__pthread_rwlock_trywrlock):
+ Set __wrphase_fute to 1 only if we started the write phase.
+ * nptl/tst-rwlock-tryrdlock-stall.c: New file.
+ * nptl/tst-rwlock-trywrlock-stall.c: New file.
+ * support/Makefile (libsupport-routines): Add xpthread_rwlock_destroy.
+ * support/xpthread_rwlock_destroy.c: New file.
+ * support/xthread.h: Declare xpthread_rwlock_destroy.
+
2019-02-01 Joseph Myers <joseph@codesourcery.com>
* scripts/build-many-glibcs.py (Context.checkout): Default MPFR
diff --git a/nptl/Makefile b/nptl/Makefile
index 340282c..0e316ed 100644
--- a/nptl/Makefile
+++ b/nptl/Makefile
@@ -319,7 +319,8 @@ tests = tst-attr1 tst-attr2 tst-attr3 tst-default-attr \
tst-cnd-basic tst-mtx-trylock tst-cnd-broadcast \
tst-cnd-timedwait tst-thrd-detach tst-mtx-basic tst-thrd-sleep \
tst-mtx-recursive tst-tss-basic tst-call-once tst-mtx-timedlock \
- tst-rwlock-pwn
+ tst-rwlock-pwn \
+ tst-rwlock-tryrdlock-stall tst-rwlock-trywrlock-stall
tests-internal := tst-rwlock19 tst-rwlock20 \
tst-sem11 tst-sem12 tst-sem13 \
diff --git a/nptl/pthread_rwlock_tryrdlock.c b/nptl/pthread_rwlock_tryrdlock.c
index 368862f..2f94f17 100644
--- a/nptl/pthread_rwlock_tryrdlock.c
+++ b/nptl/pthread_rwlock_tryrdlock.c
@@ -94,15 +94,22 @@ __pthread_rwlock_tryrdlock (pthread_rwlock_t *rwlock)
/* Same as in __pthread_rwlock_rdlock_full:
We started the read phase, so we are also responsible for
updating the write-phase futex. Relaxed MO is sufficient.
- Note that there can be no other reader that we have to wake
- because all other readers will see the read phase started by us
- (or they will try to start it themselves); if a writer started
- the read phase, we cannot have started it. Furthermore, we
- cannot discard a PTHREAD_RWLOCK_FUTEX_USED flag because we will
- overwrite the value set by the most recent writer (or the readers
- before it in case of explicit hand-over) and we know that there
- are no waiting readers. */
- atomic_store_relaxed (&rwlock->__data.__wrphase_futex, 0);
+ We have to do the same steps as a writer would when handing over the
+ read phase to use because other readers cannot distinguish between
+ us and the writer.
+ Note that __pthread_rwlock_tryrdlock callers will not have to be
+ woken up because they will either see the read phase started by us
+ or they will try to start it themselves; however, callers of
+ __pthread_rwlock_rdlock_full just increase the reader count and then
+ check what state the lock is in, so they cannot distinguish between
+ us and a writer that acquired and released the lock in the
+ meantime. */
+ if ((atomic_exchange_relaxed (&rwlock->__data.__wrphase_futex, 0)
+ & PTHREAD_RWLOCK_FUTEX_USED) != 0)
+ {
+ int private = __pthread_rwlock_get_private (rwlock);
+ futex_wake (&rwlock->__data.__wrphase_futex, INT_MAX, private);
+ }
}
return 0;
diff --git a/nptl/pthread_rwlock_trywrlock.c b/nptl/pthread_rwlock_trywrlock.c
index fd37a71..fae475c 100644
--- a/nptl/pthread_rwlock_trywrlock.c
+++ b/nptl/pthread_rwlock_trywrlock.c
@@ -46,8 +46,15 @@ __pthread_rwlock_trywrlock (pthread_rwlock_t *rwlock)
&rwlock->__data.__readers, &r,
r | PTHREAD_RWLOCK_WRPHASE | PTHREAD_RWLOCK_WRLOCKED))
{
+ /* We have become the primary writer and we cannot have shared
+ the PTHREAD_RWLOCK_FUTEX_USED flag with someone else, so we
+ can simply enable blocking (see full wrlock code). */
atomic_store_relaxed (&rwlock->__data.__writers_futex, 1);
- atomic_store_relaxed (&rwlock->__data.__wrphase_futex, 1);
+ /* If we started a write phase, we need to enable readers to
+ wait. If we did not, we must not change it because other threads
+ may have set the PTHREAD_RWLOCK_FUTEX_USED in the meantime. */
+ if ((r & PTHREAD_RWLOCK_WRPHASE) == 0)
+ atomic_store_relaxed (&rwlock->__data.__wrphase_futex, 1);
atomic_store_relaxed (&rwlock->__data.__cur_writer,
THREAD_GETMEM (THREAD_SELF, tid));
return 0;
diff --git a/nptl/tst-rwlock-tryrdlock-stall.c b/nptl/tst-rwlock-tryrdlock-stall.c
new file mode 100644
index 0000000..5e476da
--- /dev/null
+++ b/nptl/tst-rwlock-tryrdlock-stall.c
@@ -0,0 +1,355 @@
+/* Bug 23844: Test for pthread_rwlock_tryrdlock stalls.
+ Copyright (C) 2019 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <http://www.gnu.org/licenses/>. */
+
+/* For a full analysis see comment:
+ https://sourceware.org/bugzilla/show_bug.cgi?id=23844#c14
+
+ Provided here for reference:
+
+ --- Analysis of pthread_rwlock_tryrdlock() stall ---
+ A read lock begins to execute.
+
+ In __pthread_rwlock_rdlock_full:
+
+ We can attempt a read lock, but find that the lock is
+ in a write phase (PTHREAD_RWLOCK_WRPHASE, or WP-bit
+ is set), and the lock is held by a primary writer
+ (PTHREAD_RWLOCK_WRLOCKED is set). In this case we must
+ wait for explicit hand over from the writer to us or
+ one of the other waiters. The read lock threads are
+ about to execute:
+
+ 341 r = (atomic_fetch_add_acquire (&rwlock->__data.__readers,
+ 342 (1 << PTHREAD_RWLOCK_READER_SHIFT))
+ 343 + (1 << PTHREAD_RWLOCK_READER_SHIFT));
+
+ An unlock beings to execute.
+
+ Then in __pthread_rwlock_wrunlock:
+
+ 547 unsigned int r = atomic_load_relaxed (&rwlock->__data.__readers);
+ ...
+ 549 while (!atomic_compare_exchange_weak_release
+ 550 (&rwlock->__data.__readers, &r,
+ 551 ((r ^ PTHREAD_RWLOCK_WRLOCKED)
+ 552 ^ ((r >> PTHREAD_RWLOCK_READER_SHIFT) == 0 ? 0
+ 553 : PTHREAD_RWLOCK_WRPHASE))))
+ 554 {
+ ...
+ 556 }
+
+ We clear PTHREAD_RWLOCK_WRLOCKED, and if there are
+ no readers so we leave the lock in PTHRAD_RWLOCK_WRPHASE.
+
+ Back in the read lock.
+
+ The read lock adjusts __readres as above.
+
+ 383 while ((r & PTHREAD_RWLOCK_WRPHASE) != 0
+ 384 && (r & PTHREAD_RWLOCK_WRLOCKED) == 0)
+ 385 {
+ ...
+ 390 if (atomic_compare_exchange_weak_acquire (&rwlock->__data.__readers, &r,
+ 391 r ^ PTHREAD_RWLOCK_WRPHASE))
+ 392 {
+
+ And then attemps to start the read phase.
+
+ Assume there happens to be a tryrdlock at this point, noting
+ that PTHREAD_RWLOCK_WRLOCKED is clear, and PTHREAD_RWLOCK_WRPHASE
+ is 1. So the try lock attemps to start the read phase.
+
+ In __pthread_rwlock_tryrdlock:
+
+ 44 if ((r & PTHREAD_RWLOCK_WRPHASE) == 0)
+ 45 {
+ ...
+ 49 if (((r & PTHREAD_RWLOCK_WRLOCKED) != 0)
+ 50 && (rwlock->__data.__flags
+ 51 == PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP))
+ 52 return EBUSY;
+ 53 rnew = r + (1 << PTHREAD_RWLOCK_READER_SHIFT);
+ 54 }
+ ...
+ 89 while (!atomic_compare_exchange_weak_acquire (&rwlock->__data.__readers,
+ 90 &r, rnew));
+
+ And succeeds.
+
+ Back in the write unlock:
+
+ 557 if ((r >> PTHREAD_RWLOCK_READER_SHIFT) != 0)
+ 558 {
+ ...
+ 563 if ((atomic_exchange_relaxed (&rwlock->__data.__wrphase_futex, 0)
+ 564 & PTHREAD_RWLOCK_FUTEX_USED) != 0)
+ 565 futex_wake (&rwlock->__data.__wrphase_futex, INT_MAX, private);
+ 566 }
+
+ We note that PTHREAD_RWLOCK_FUTEX_USED is non-zero
+ and don't wake anyone. This is OK because we handed
+ over to the trylock. It will be the trylock's responsibility
+ to wake any waiters.
+
+ Back in the read lock:
+
+ The read lock fails to install PTHRAD_REWLOCK_WRPHASE as 0 because
+ the __readers value was adjusted by the trylock, and so it falls through
+ to waiting on the lock for explicit handover from either a new writer
+ or a new reader.
+
+ 448 int err = futex_abstimed_wait (&rwlock->__data.__wrphase_futex,
+ 449 1 | PTHREAD_RWLOCK_FUTEX_USED,
+ 450 abstime, private);
+
+ We use PTHREAD_RWLOCK_FUTEX_USED to indicate the futex
+ is in use.
+
+ At this point we have readers waiting on the read lock
+ to unlock. The wrlock is done. The trylock is finishing
+ the installation of the read phase.
+
+ 92 if ((r & PTHREAD_RWLOCK_WRPHASE) != 0)
+ 93 {
+ ...
+ 105 atomic_store_relaxed (&rwlock->__data.__wrphase_futex, 0);
+ 106 }
+
+ The trylock does note that we were the one that
+ installed the read phase, but the comments are not
+ correct, the execution ordering above shows that
+ readers might indeed be waiting, and they are.
+
+ The atomic_store_relaxed throws away PTHREAD_RWLOCK_FUTEX_USED,
+ and the waiting reader is never worken becuase as noted
+ above it is conditional on the futex being used.
+
+ The solution is for the trylock thread to inspect
+ PTHREAD_RWLOCK_FUTEX_USED and wake the waiting readers.
+
+ --- Analysis of pthread_rwlock_trywrlock() stall ---
+
+ A write lock begins to execute, takes the write lock,
+ and then releases the lock...
+
+ In pthread_rwlock_wrunlock():
+
+ 547 unsigned int r = atomic_load_relaxed (&rwlock->__data.__readers);
+ ...
+ 549 while (!atomic_compare_exchange_weak_release
+ 550 (&rwlock->__data.__readers, &r,
+ 551 ((r ^ PTHREAD_RWLOCK_WRLOCKED)
+ 552 ^ ((r >> PTHREAD_RWLOCK_READER_SHIFT) == 0 ? 0
+ 553 : PTHREAD_RWLOCK_WRPHASE))))
+ 554 {
+ ...
+ 556 }
+
+ ... leaving it in the write phase with zero readers
+ (the case where we leave the write phase in place
+ during a write unlock).
+
+ A write trylock begins to execute.
+
+ In __pthread_rwlock_trywrlock:
+
+ 40 while (((r & PTHREAD_RWLOCK_WRLOCKED) == 0)
+ 41 && (((r >> PTHREAD_RWLOCK_READER_SHIFT) == 0)
+ 42 || (prefer_writer && ((r & PTHREAD_RWLOCK_WRPHASE) != 0))))
+ 43 {
+
+ The lock is not locked.
+
+ There are no readers.
+
+ 45 if (atomic_compare_exchange_weak_acquire (
+ 46 &rwlock->__data.__readers, &r,
+ 47 r | PTHREAD_RWLOCK_WRPHASE | PTHREAD_RWLOCK_WRLOCKED))
+
+ We atomically install the write phase and we take the
+ exclusive write lock.
+
+ 48 {
+ 49 atomic_store_relaxed (&rwlock->__data.__writers_futex, 1);
+
+ We get this far.
+
+ A reader lock begins to execute.
+
+ In pthread_rwlock_rdlock:
+
+ 437 for (;;)
+ 438 {
+ 439 while (((wpf = atomic_load_relaxed (&rwlock->__data.__wrphase_futex))
+ 440 | PTHREAD_RWLOCK_FUTEX_USED) == (1 | PTHREAD_RWLOCK_FUTEX_USED))
+ 441 {
+ 442 int private = __pthread_rwlock_get_private (rwlock);
+ 443 if (((wpf & PTHREAD_RWLOCK_FUTEX_USED) == 0)
+ 444 && (!atomic_compare_exchange_weak_relaxed
+ 445 (&rwlock->__data.__wrphase_futex,
+ 446 &wpf, wpf | PTHREAD_RWLOCK_FUTEX_USED)))
+ 447 continue;
+ 448 int err = futex_abstimed_wait (&rwlock->__data.__wrphase_futex,
+ 449 1 | PTHREAD_RWLOCK_FUTEX_USED,
+ 450 abstime, private);
+
+ We are in a write phase, so the while() on line 439 is true.
+
+ The value of wpf does not have PTHREAD_RWLOCK_FUTEX_USED set
+ since this is the first reader to lock.
+
+ The atomic operation sets wpf with PTHREAD_RELOCK_FUTEX_USED
+ on the expectation that this reader will be woken during
+ the handoff.
+
+ Back in pthread_rwlock_trywrlock:
+
+ 50 atomic_store_relaxed (&rwlock->__data.__wrphase_futex, 1);
+ 51 atomic_store_relaxed (&rwlock->__data.__cur_writer,
+ 52 THREAD_GETMEM (THREAD_SELF, tid));
+ 53 return 0;
+ 54 }
+ ...
+ 57 }
+
+ We write 1 to __wrphase_futex discarding PTHREAD_RWLOCK_FUTEX_USED,
+ and so in the unlock we will not awaken the waiting reader.
+
+ The solution to this is to realize that if we did not start the write
+ phase we need not write 1 or any other value to __wrphase_futex.
+ This ensures that any readers (which saw __wrphase_futex != 0) can
+ set PTHREAD_RWLOCK_FUTEX_USED and this can be used at unlock to
+ wake them.
+
+ If we installed the write phase then all other readers are looping
+ here:
+
+ In __pthread_rwlock_rdlock_full:
+
+ 437 for (;;)
+ 438 {
+ 439 while (((wpf = atomic_load_relaxed (&rwlock->__data.__wrphase_futex))
+ 440 | PTHREAD_RWLOCK_FUTEX_USED) == (1 | PTHREAD_RWLOCK_FUTEX_USED))
+ 441 {
+ ...
+ 508 }
+
+ waiting for the write phase to be installed or removed before they
+ can begin waiting on __wrphase_futex (part of the algorithm), or
+ taking a concurrent read lock, and thus we can safely write 1 to
+ __wrphase_futex.
+
+ If we did not install the write phase then the readers may already
+ be waiting on the futex, the original writer wrote 1 to __wrphase_futex
+ as part of starting the write phase, and we cannot also write 1
+ without loosing the PTHREAD_RWLOCK_FUTEX_USED bit.
+
+ ---
+
+ Summary for the pthread_rwlock_tryrdlock() stall:
+
+ The stall is caused by pthread_rwlock_tryrdlock failing to check
+ that PTHREAD_RWLOCK_FUTEX_USED is set in the __wrphase_futex futex
+ and then waking the futex.
+
+ The fix for bug 23844 ensures that waiters on __wrphase_futex are
+ correctly woken. Before the fix the test stalls as readers can
+ wait forever on __wrphase_futex. */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <pthread.h>
+#include <support/xthread.h>
+#include <errno.h>
+
+/* We need only one lock to reproduce the issue. We will need multiple
+ threads to get the exact case where we have a read, try, and unlock
+ all interleaving to produce the case where the readers are waiting
+ and the try fails to wake them. */
+pthread_rwlock_t onelock;
+
+/* The number of threads is arbitrary but empirically chosen to have
+ enough threads that we see the condition where waiting readers are
+ not woken by a successful tryrdlock. */
+#define NTHREADS 32
+
+_Atomic int do_exit;
+
+void *
+run_loop (void *arg)
+{
+ int i = 0, ret;
+ while (!do_exit)
+ {
+ /* Arbitrarily choose if we are the writer or reader. Choose a
+ high enough ratio of readers to writers to make it likely
+ that readers block (and eventually are susceptable to
+ stalling).
+
+ If we are a writer, take the write lock, and then unlock.
+ If we are a reader, try the lock, then lock, then unlock. */
+ if ((i % 8) != 0)
+ xpthread_rwlock_wrlock (&onelock);
+ else
+ {
+ if ((ret = pthread_rwlock_tryrdlock (&onelock)) != 0)
+ {
+ if (ret == EBUSY)
+ xpthread_rwlock_rdlock (&onelock);
+ else
+ exit (EXIT_FAILURE);
+ }
+ }
+ /* Thread does some work and then unlocks. */
+ xpthread_rwlock_unlock (&onelock);
+ i++;
+ }
+ return NULL;
+}
+
+int
+do_test (void)
+{
+ int i;
+ pthread_t tids[NTHREADS];
+ xpthread_rwlock_init (&onelock, NULL);
+ for (i = 0; i < NTHREADS; i++)
+ tids[i] = xpthread_create (NULL, run_loop, NULL);
+ /* Run for some amount of time. Empirically speaking exercising
+ the stall via pthread_rwlock_tryrdlock is much harder, and on
+ a 3.5GHz 4 core x86_64 VM system it takes somewhere around
+ 20-200s to stall, approaching 100% stall past 200s. We can't
+ wait that long for a regression test so we just test for 20s,
+ and expect the stall to happen with a 5-10% chance (enough for
+ developers to see). */
+ sleep (20);
+ /* Then exit. */
+ printf ("INFO: Exiting...\n");
+ do_exit = 1;
+ /* If any readers stalled then we will timeout waiting for them. */
+ for (i = 0; i < NTHREADS; i++)
+ xpthread_join (tids[i]);
+ printf ("INFO: Done.\n");
+ xpthread_rwlock_destroy (&onelock);
+ printf ("PASS: No pthread_rwlock_tryrdlock stalls detected.\n");
+ return 0;
+}
+
+#define TIMEOUT 30
+#include <support/test-driver.c>
diff --git a/nptl/tst-rwlock-trywrlock-stall.c b/nptl/tst-rwlock-trywrlock-stall.c
new file mode 100644
index 0000000..14d27cb
--- /dev/null
+++ b/nptl/tst-rwlock-trywrlock-stall.c
@@ -0,0 +1,108 @@
+/* Bug 23844: Test for pthread_rwlock_trywrlock stalls.
+ Copyright (C) 2019 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <http://www.gnu.org/licenses/>. */
+
+/* For a full analysis see comments in tst-rwlock-tryrdlock-stall.c.
+
+ Summary for the pthread_rwlock_trywrlock() stall:
+
+ The stall is caused by pthread_rwlock_trywrlock setting
+ __wrphase_futex futex to 1 and loosing the
+ PTHREAD_RWLOCK_FUTEX_USED bit.
+
+ The fix for bug 23844 ensures that waiters on __wrphase_futex are
+ correctly woken. Before the fix the test stalls as readers can
+ wait forever on __wrphase_futex. */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <pthread.h>
+#include <support/xthread.h>
+#include <errno.h>
+
+/* We need only one lock to reproduce the issue. We will need multiple
+ threads to get the exact case where we have a read, try, and unlock
+ all interleaving to produce the case where the readers are waiting
+ and the try clears the PTHREAD_RWLOCK_FUTEX_USED bit and a
+ subsequent unlock fails to wake them. */
+pthread_rwlock_t onelock;
+
+/* The number of threads is arbitrary but empirically chosen to have
+ enough threads that we see the condition where waiting readers are
+ not woken by a successful unlock. */
+#define NTHREADS 32
+
+_Atomic int do_exit;
+
+void *
+run_loop (void *arg)
+{
+ int i = 0, ret;
+ while (!do_exit)
+ {
+ /* Arbitrarily choose if we are the writer or reader. Choose a
+ high enough ratio of readers to writers to make it likely
+ that readers block (and eventually are susceptable to
+ stalling).
+
+ If we are a writer, take the write lock, and then unlock.
+ If we are a reader, try the lock, then lock, then unlock. */
+ if ((i % 8) != 0)
+ {
+ if ((ret = pthread_rwlock_trywrlock (&onelock)) != 0)
+ {
+ if (ret == EBUSY)
+ xpthread_rwlock_wrlock (&onelock);
+ else
+ exit (EXIT_FAILURE);
+ }
+ }
+ else
+ xpthread_rwlock_rdlock (&onelock);
+ /* Thread does some work and then unlocks. */
+ xpthread_rwlock_unlock (&onelock);
+ i++;
+ }
+ return NULL;
+}
+
+int
+do_test (void)
+{
+ int i;
+ pthread_t tids[NTHREADS];
+ xpthread_rwlock_init (&onelock, NULL);
+ for (i = 0; i < NTHREADS; i++)
+ tids[i] = xpthread_create (NULL, run_loop, NULL);
+ /* Run for some amount of time. The pthread_rwlock_tryrwlock stall
+ is very easy to trigger and happens in seconds under the test
+ conditions. */
+ sleep (10);
+ /* Then exit. */
+ printf ("INFO: Exiting...\n");
+ do_exit = 1;
+ /* If any readers stalled then we will timeout waiting for them. */
+ for (i = 0; i < NTHREADS; i++)
+ xpthread_join (tids[i]);
+ printf ("INFO: Done.\n");
+ xpthread_rwlock_destroy (&onelock);
+ printf ("PASS: No pthread_rwlock_tryrwlock stalls detected.\n");
+ return 0;
+}
+
+#include <support/test-driver.c>
diff --git a/support/Makefile b/support/Makefile
index 432cf2f..c15b936 100644
--- a/support/Makefile
+++ b/support/Makefile
@@ -129,6 +129,7 @@ libsupport-routines = \
xpthread_mutexattr_settype \
xpthread_once \
xpthread_rwlock_init \
+ xpthread_rwlock_destroy \
xpthread_rwlock_rdlock \
xpthread_rwlock_unlock \
xpthread_rwlock_wrlock \
diff --git a/support/xpthread_rwlock_destroy.c b/support/xpthread_rwlock_destroy.c
new file mode 100644
index 0000000..6d6e953
--- /dev/null
+++ b/support/xpthread_rwlock_destroy.c
@@ -0,0 +1,26 @@
+/* pthread_rwlock_destroy with error checking.
+ Copyright (C) 2019 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <http://www.gnu.org/licenses/>. */
+
+#include <support/xthread.h>
+
+void
+xpthread_rwlock_destroy (pthread_rwlock_t *rwlock)
+{
+ xpthread_check_return ("pthread_rwlock_destroy",
+ pthread_rwlock_destroy (rwlock));
+}
diff --git a/support/xthread.h b/support/xthread.h
index 47c2323..9fe1f68 100644
--- a/support/xthread.h
+++ b/support/xthread.h
@@ -84,6 +84,7 @@ void xpthread_rwlockattr_setkind_np (pthread_rwlockattr_t *attr, int pref);
void xpthread_rwlock_wrlock (pthread_rwlock_t *rwlock);
void xpthread_rwlock_rdlock (pthread_rwlock_t *rwlock);
void xpthread_rwlock_unlock (pthread_rwlock_t *rwlock);
+void xpthread_rwlock_destroy (pthread_rwlock_t *rwlock);
__END_DECLS
-----------------------------------------------------------------------
Summary of changes:
ChangeLog | 17 ++
nptl/Makefile | 3 +-
nptl/pthread_rwlock_tryrdlock.c | 25 ++-
nptl/pthread_rwlock_trywrlock.c | 9 +-
nptl/tst-rwlock-tryrdlock-stall.c | 355 +++++++++++++++++++++++++++++++++++++
nptl/tst-rwlock-trywrlock-stall.c | 108 +++++++++++
support/Makefile | 1 +
support/xpthread_rwlock_destroy.c | 26 +++
support/xthread.h | 1 +
9 files changed, 534 insertions(+), 11 deletions(-)
create mode 100644 nptl/tst-rwlock-tryrdlock-stall.c
create mode 100644 nptl/tst-rwlock-trywrlock-stall.c
create mode 100644 support/xpthread_rwlock_destroy.c
hooks/post-receive
--
GNU C Library master sources