This is the mail archive of the gdb-patches@sourceware.org mailing list for the GDB project.
| Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
|---|---|---|
| Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
| Other format: | [Raw text] | |
Dear GDB developers,
I am forwarding a patch that landed in Debian BTS a while ago for adding native support for Renesas SH (sh4).
You should be able to find original patch from Yoshii-san at Debian BTS:
<http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=576242#5>
I have updated the patch to current CVS HEAD, but I have not been able to test it as I lack SH hardware.
At file gdb/sh-linux-tdep.c:596, there is a call to linux_init_abi (info, gdbarch); which was not there when the original patch was written, the rest of it, still applies to current HEAD, so if someone could test the patch and, in the case it works, apply it to mainline GDB, that would be great.
I would like to add support for an unofficial Debian SH port, so any comments are welcome.
Description: Add Renesas SH (sh4) support
Add support for Renesas SH (sh4) architecture.
.
gdb (7.4-1~cvs20111117.2) experimental; urgency=low
.
* Add Renesas SH (sh4) support (Closes: #576242)
- Thanks Nobuhiro Iwamatsu, Takashi Yoshii.
Author: Hector Oron <zumbi@debian.org>
Bug-Debian: http://bugs.debian.org/576242
---
The information above should follow the Patch Tagging Guidelines, please
checkout http://dep.debian.net/deps/dep3/ to learn about the format. Here
are templates for supplementary fields that you might want to add:
Forwarded: <no|not-needed|url proving that it has been forwarded>
Last-Update: <2011-11-17>
--- gdb-7.4.orig/gdb/configure.host
+++ gdb-7.4/gdb/configure.host
@@ -139,6 +139,7 @@ powerpc64-*-linux*) gdb_host=ppc64-l
s390*-*-*) gdb_host=s390 ;;
+sh*-*-linux*) gdb_host=linux ;;
sh*-*-netbsdelf* | sh*-*-knetbsd*-gnu)
gdb_host=nbsd ;;
sh*-*-openbsd*) gdb_host=nbsd ;;
--- gdb-7.4.orig/gdb/Makefile.in
+++ gdb-7.4/gdb/Makefile.in
@@ -1538,6 +1538,7 @@ ALLDEPFILES = \
score-tdep.c \
ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
+ sh-linux-tdep.c sh-linux-nat.c \
sol2-tdep.c \
solib-irix.c solib-svr4.c solib-sunos.c \
sparc-linux-nat.c sparc-linux-tdep.c \
--- gdb-7.4.orig/gdb/sh-linux-tdep.c
+++ gdb-7.4/gdb/sh-linux-tdep.c
@@ -19,11 +19,34 @@
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
+#include "gdbcore.h"
+#include "frame.h"
+#include "frame-base.h"
+#include "frame-unwind.h"
+#include "dwarf2-frame.h"
+#include "value.h"
+#include "regcache.h"
+#include "inferior.h"
#include "osabi.h"
+#include "reggroups.h"
+#include "arch-utils.h"
+#include "floatformat.h"
#include "solib-svr4.h"
#include "symtab.h"
+#include "gdb_string.h"
+#include "command.h"
+#include "gdb_assert.h"
+#include <sys/ptrace.h>
+#include <sys/types.h>
+#include <sys/param.h>
+#include <sys/user.h>
+#include <sys/syscall.h>
+
+#include <asm/ptrace.h>
+
+#include "regset.h"
#include "glibc-tdep.h"
#include "sh-tdep.h"
#include "linux-tdep.h"
@@ -71,9 +94,505 @@ static const struct sh_corefile_regmap f
{-1 /* Terminator. */, 0}
};
+/* Recognizing signal handler frames. */
+
+/* GNU/Linux has two flavors of signals. Normal signal handlers, and
+ "realtime" (RT) signals. The RT signals can provide additional
+ information to the signal handler if the SA_SIGINFO flag is set
+ when establishing a signal handler using `sigaction'. It is not
+ unlikely that future versions of GNU/Linux will support SA_SIGINFO
+ for normal signals too. */
+
+/* When the SH Linux kernel calls a signal handler and the
+ SA_RESTORER flag isn't set, the return address points to a bit of
+ code on the stack. This function returns whether the PC appears to
+ be within this bit of code.
+
+ The instruction sequence for normal signals is
+ mov.w 1f,r3
+ trapa #16
+ or r0, r0
+ or r0, r0
+ or r0, r0
+ or r0, r0
+ or r0, r0
+ 1: .word __NR_sigreturn
+ or 0x9305 0xc310 0x200b 0x200b 0x200b 0x200b 0x200b 0x0077.
+
+ Checking for the code sequence should be somewhat reliable, because
+ the effect is to call the system call sigreturn. This is unlikely
+ to occur anywhere other than a signal trampoline.
+
+ It kind of sucks that we have to read memory from the process in
+ order to identify a signal trampoline, but there doesn't seem to be
+ any other way. The PC_IN_SIGTRAMP macro in tm-linux.h arranges to
+ only call us if no function name could be identified, which should
+ be the case since the code is on the stack.
+
+ Detection of signal trampolines for handlers that set the
+ SA_RESTORER flag is in general not possible. Unfortunately this is
+ what the GNU C Library has been doing for quite some time now.
+ However, as of version 2.1.2, the GNU C Library uses signal
+ trampolines (named __restore and __restore_rt) that are identical
+ to the ones used by the kernel. Therefore, these trampolines are
+ supported too. */
+
+#define MOVW(n) (0x9300|((n)-2)) /* Move mem word at PC+n to R3 */
+#define TRAP16 0xc310 /* Syscall w/no args (NR in R3) */
+#define OR_R0_R0 0x200b /* or r0,r0 (insert to avoid hardware bug) */
+
+#define LINUX_SIGTRAMP_INSN0 MOVW(7) /* Move mem word at PC+7 to R3 */
+#define LINUX_SIGTRAMP_INSN1 TRAP16 /* Syscall w/no args (NR in R3) */
+#define LINUX_SIGTRAMP_INSN2 OR_R0_R0 /* or r0,r0 (insert to avoid hardware bug) */
+
+static const unsigned short linux_sigtramp_code[] =
+{
+ LINUX_SIGTRAMP_INSN0,
+ LINUX_SIGTRAMP_INSN1,
+ LINUX_SIGTRAMP_INSN2,
+ LINUX_SIGTRAMP_INSN2,
+ LINUX_SIGTRAMP_INSN2,
+ LINUX_SIGTRAMP_INSN2,
+ LINUX_SIGTRAMP_INSN2,
+ __NR_sigreturn
+};
+
+#define LINUX_SIGTRAMP_LEN (sizeof linux_sigtramp_code)
+
+/* If PC is in a sigtramp routine, return the address of the start of
+ the routine. Otherwise, return 0. */
+
+static CORE_ADDR
+sh_linux_sigtramp_start (struct frame_info *next_frame)
+{
+ CORE_ADDR pc = get_frame_pc (next_frame);
+ gdb_byte buf[LINUX_SIGTRAMP_LEN];
+
+ /* We only recognize a signal trampoline if PC is at the start of
+ one of the three instructions. We optimize for finding the PC at
+ the start, as will be the case when the trampoline is not the
+ first frame on the stack. We assume that in the case where the
+ PC is not at the start of the instruction sequence, there will be
+ a few trailing readable bytes on the stack. */
+
+ if (!safe_frame_unwind_memory (next_frame, pc, buf, LINUX_SIGTRAMP_LEN))
+ return 0;
+
+ if (buf[0] != LINUX_SIGTRAMP_INSN0)
+ {
+ if (buf[0] != LINUX_SIGTRAMP_INSN1)
+ return 0;
+
+ pc -= 2;
+
+ if (!safe_frame_unwind_memory (next_frame, pc, buf, LINUX_SIGTRAMP_LEN))
+ return 0;
+ }
+
+ if (memcmp (buf, linux_sigtramp_code, LINUX_SIGTRAMP_LEN) != 0)
+ return 0;
+
+ return pc;
+}
+
+/* This function does the same for RT signals. Here the instruction
+ sequence is
+ mov.w 1f,r3
+ trapa #16
+ or r0, r0
+ or r0, r0
+ or r0, r0
+ or r0, r0
+ or r0, r0
+ 1: .word __NR_rt_sigreturn
+ or 0x9305 0xc310 0x200b 0x200b 0x200b 0x200b 0x200b 0x00ad.
+
+ The effect is to call the system call rt_sigreturn. */
+
+#define LINUX_RT_SIGTRAMP_INSN0 MOVW(7) /* Move mem word at PC+7 to R3 */
+#define LINUX_RT_SIGTRAMP_INSN1 TRAP16 /* Syscall w/no args (NR in R3) */
+#define LINUX_RT_SIGTRAMP_INSN2 OR_R0_R0 /* or r0,r0 (insert to avoid hardware bug) */
+
+static const unsigned short linux_rt_sigtramp_code[] =
+{
+ LINUX_RT_SIGTRAMP_INSN0,
+ LINUX_RT_SIGTRAMP_INSN1,
+ LINUX_RT_SIGTRAMP_INSN2,
+ LINUX_RT_SIGTRAMP_INSN2,
+ LINUX_RT_SIGTRAMP_INSN2,
+ LINUX_RT_SIGTRAMP_INSN2,
+ LINUX_RT_SIGTRAMP_INSN2,
+ __NR_rt_sigreturn
+};
+
+#define LINUX_RT_SIGTRAMP_LEN (sizeof linux_rt_sigtramp_code)
+
+/* If PC is in a RT sigtramp routine, return the address of the start
+ of the routine. Otherwise, return 0. */
+
+static CORE_ADDR
+sh_linux_rt_sigtramp_start (struct frame_info *next_frame)
+{
+ CORE_ADDR pc = get_frame_pc (next_frame);
+ gdb_byte buf[LINUX_RT_SIGTRAMP_LEN];
+
+ /* We only recognize a signal trampoline if PC is at the start of
+ one of the two instructions. We optimize for finding the PC at
+ the start, as will be the case when the trampoline is not the
+ first frame on the stack. We assume that in the case where the
+ PC is not at the start of the instruction sequence, there will be
+ a few trailing readable bytes on the stack. */
+
+ if (!safe_frame_unwind_memory (next_frame, pc, buf, LINUX_RT_SIGTRAMP_LEN))
+ return 0;
+
+ if (buf[0] != LINUX_RT_SIGTRAMP_INSN0)
+ {
+ if (buf[0] != LINUX_RT_SIGTRAMP_INSN1)
+ return 0;
+
+ pc -= 2;
+
+ if (!safe_frame_unwind_memory (next_frame, pc, buf,
+ LINUX_RT_SIGTRAMP_LEN))
+ return 0;
+ }
+
+ if (memcmp (buf, linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN) != 0)
+ return 0;
+
+ return pc;
+}
+
+/* Return whether PC is in a GNU/Linux sigtramp routine. */
+
+static int
+sh_linux_sigtramp_p (struct frame_info *this_frame)
+{
+ CORE_ADDR pc = get_frame_pc (this_frame);
+ char *name;
+
+ find_pc_partial_function (pc, &name, NULL, NULL);
+
+ /* If we have NAME, we can optimize the search. The trampolines are
+ named __restore and __restore_rt. However, they aren't dynamically
+ exported from the shared C library, so the trampoline may appear to
+ be part of the preceding function. This should always be sigaction,
+ __sigaction, or __libc_sigaction (all aliases to the same function). */
+ if (name == NULL || strstr (name, "sigaction") != NULL)
+ return (sh_linux_sigtramp_start (this_frame) != 0
+ || sh_linux_rt_sigtramp_start (this_frame) != 0);
+
+ return (strcmp ("__restore", name) == 0
+ || strcmp ("__restore_rt", name) == 0);
+}
+
+/* Offset to struct sigcontext in ucontext, from <asm/ucontext.h>. */
+#define SH_LINUX_UCONTEXT_SIGCONTEXT_OFFSET 12
+
+
+/* Assuming NEXT_FRAME is a frame following a GNU/Linux sigtramp
+ routine, return the address of the associated sigcontext structure. */
+
+static CORE_ADDR
+sh_linux_sigcontext_addr (struct frame_info *this_frame)
+{
+ CORE_ADDR pc;
+ CORE_ADDR sp;
+
+ sp = get_frame_register_unsigned (this_frame, SP_REGNUM);
+
+ pc = sh_linux_sigtramp_start (this_frame);
+ if (pc)
+ {
+ return sp;
+ }
+
+ pc = sh_linux_rt_sigtramp_start (this_frame);
+ if (pc)
+ {
+ CORE_ADDR ucontext_addr;
+
+ /* The sigcontext structure is part of the user context. A
+ pointer to the user context is passed as the third argument
+ to the signal handler. */
+ ucontext_addr = get_frame_register_unsigned (this_frame, ARG0_REGNUM+2);
+ return ucontext_addr + SH_LINUX_UCONTEXT_SIGCONTEXT_OFFSET;
+ }
+
+ error ("Couldn't recognize signal trampoline.");
+ return 0;
+}
+
+/* Signal trampolines. */
+extern struct sh_frame_cache *sh_alloc_frame_cache (void);
+
+static struct sh_frame_cache *
+sh_linux_sigtramp_frame_cache (struct frame_info *this_frame, void **this_cache)
+{
+ struct sh_frame_cache *cache;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (get_current_arch ());
+ CORE_ADDR sigcontext_addr;
+
+ if (*this_cache)
+ return *this_cache;
+
+ cache = sh_alloc_frame_cache ();
+
+ cache->base = get_frame_register_unsigned (this_frame, SP_REGNUM);
+ sigcontext_addr = tdep->sigcontext_addr (this_frame);
+ if (tdep->sc_reg_offset)
+ {
+ int i;
+
+ gdb_assert (tdep->sc_num_regs <= SH_NUM_REGS);
+
+ for (i = 0; i < tdep->sc_num_regs; i++)
+ if (tdep->sc_reg_offset[i] != -1)
+ cache->saved_regs[i] = sigcontext_addr + tdep->sc_reg_offset[i];
+ }
+
+ *this_cache = cache;
+ return cache;
+}
+
+static void
+sh_linux_sigtramp_frame_this_id (struct frame_info *this_frame, void **this_cache,
+ struct frame_id *this_id)
+{
+ struct sh_frame_cache *cache =
+ sh_linux_sigtramp_frame_cache (this_frame, this_cache);
+
+ (*this_id) = frame_id_build (cache->base + 64, cache->pc);
+}
+
+extern struct value * sh_frame_prev_register ();
+static struct value *
+sh_linux_sigtramp_frame_prev_register (struct frame_info *this_frame,
+ void **this_cache, int regnum)
+{
+ sh_linux_sigtramp_frame_cache (this_frame, this_cache);
+
+ return sh_frame_prev_register (this_frame, this_cache, regnum);
+}
+
+static int
+sh_linux_sigtramp_frame_sniffer (const struct frame_unwind *self,
+ struct frame_info *this_frame,
+ void **this_prologue_cache)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (get_frame_arch (this_frame));
+
+ /* We shouldn't even bother if we don't have a sigcontext_addr
+ handler. */
+ if (tdep->sigcontext_addr == NULL)
+ return 0;
+
+ if (tdep->sigtramp_p != NULL)
+ {
+ if (tdep->sigtramp_p (this_frame))
+ return 1;
+ }
+
+ return 0;
+}
+
+static const struct frame_unwind sh_linux_sigtramp_frame_unwind =
+{
+ SIGTRAMP_FRAME,
+ sh_linux_sigtramp_frame_this_id,
+ sh_linux_sigtramp_frame_prev_register,
+ NULL,
+ sh_linux_sigtramp_frame_sniffer
+};
+
+/* Supply register REGNUM from the buffer specified by GREGS and LEN
+ in the general-purpose register set REGSET to register cache
+ REGCACHE. If REGNUM is -1, do this for all registers in REGSET. */
+
+void
+sh_supply_gregset (const struct regset *regset, struct regcache *regcache,
+ int regnum, const void *gregs, size_t len)
+{
+ const struct gdbarch_tdep *tdep = gdbarch_tdep (regset->arch);
+ const char *regs = gregs;
+ int i;
+
+ gdb_assert (len == tdep->sizeof_gregset);
+
+ for (i = 0; i < tdep->gregset_num_regs; i++)
+ {
+ if ((regnum == i || regnum == -1)
+ && tdep->gregset_reg_offset[i] != -1)
+ regcache_raw_supply (regcache, i, regs + tdep->gregset_reg_offset[i]);
+ }
+}
+
+/* Collect register REGNUM from the register cache REGCACHE and store
+ it in the buffer specified by GREGS and LEN as described by the
+ general-purpose register set REGSET. If REGNUM is -1, do this for
+ all registers in REGSET. */
+
+void
+sh_collect_gregset (const struct regset *regset,
+ const struct regcache *regcache,
+ int regnum, void *gregs, size_t len)
+{
+ const struct gdbarch_tdep *tdep = gdbarch_tdep (regset->arch);
+ char *regs = gregs;
+ int i;
+
+ gdb_assert (len == tdep->sizeof_gregset);
+
+ for (i = 0; i < tdep->gregset_num_regs; i++)
+ {
+ if ((regnum == i || regnum == -1)
+ && tdep->gregset_reg_offset[i] != -1)
+ regcache_raw_collect (regcache, i, regs + tdep->gregset_reg_offset[i]);
+ }
+}
+
+/* Supply register REGNUM from the buffer specified by FPREGS and LEN
+ in the floating-point register set REGSET to register cache
+ REGCACHE. If REGNUM is -1, do this for all registers in REGSET. */
+
+static void
+sh_supply_fpregset (const struct regset *regset, struct regcache *regcache,
+ int regnum, const void *fpregs, size_t len)
+{
+ const struct gdbarch_tdep *tdep = gdbarch_tdep (regset->arch);
+ const char *regs = fpregs;
+ int i;
+
+ gdb_assert (len == tdep->sizeof_fpregset);
+ for (i = 0; i < 16; i++)
+ {
+ if (regnum == i+25 || regnum == -1)
+ regcache_raw_supply (regcache, i+25, regs + i*4);
+ }
+ if (regnum == FPSCR_REGNUM || regnum == -1)
+ regcache_raw_supply (regcache, FPSCR_REGNUM, regs + 32*4);
+ if (regnum == FPUL_REGNUM || regnum == -1)
+ regcache_raw_supply (regcache, FPUL_REGNUM, regs + 33*4);
+}
+
+/* Collect register REGNUM from the register cache REGCACHE and store
+ it in the buffer specified by FPREGS and LEN as described by the
+ floating-point register set REGSET. If REGNUM is -1, do this for
+ all registers in REGSET. */
+
+static void
+sh_collect_fpregset (const struct regset *regset,
+ const struct regcache *regcache,
+ int regnum, void *fpregs, size_t len)
+{
+ const struct gdbarch_tdep *tdep = gdbarch_tdep (regset->arch);
+ char *regs = fpregs;
+ int i;
+
+ gdb_assert (len == tdep->sizeof_fpregset);
+ for (i = 0; i < 16; i++)
+ {
+ if (regnum == i+25 || regnum == -1)
+ regcache_raw_collect (regcache, i+25, regs + i*4);
+ }
+ if (regnum == FPSCR_REGNUM || regnum == -1)
+ regcache_raw_collect (regcache, FPSCR_REGNUM, regs + 32*4);
+ if (regnum == FPUL_REGNUM || regnum == -1)
+ regcache_raw_collect (regcache, FPUL_REGNUM, regs + 33*4);
+}
+
+/* Return the appropriate register set for the core section identified
+ by SECT_NAME and SECT_SIZE. */
+
+const struct regset *
+sh_linux_regset_from_core_section (struct gdbarch *gdbarch,
+ const char *sect_name, size_t sect_size)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ if (strcmp (sect_name, ".reg") == 0 && sect_size == tdep->sizeof_gregset)
+ {
+ if (tdep->gregset == NULL)
+ tdep->gregset = regset_alloc (gdbarch, sh_supply_gregset,
+ sh_collect_gregset);
+ return tdep->gregset;
+ }
+
+ if ((strcmp (sect_name, ".reg2") == 0 && sect_size == tdep->sizeof_fpregset))
+ {
+ if (tdep->fpregset == NULL)
+ tdep->fpregset = regset_alloc (gdbarch, sh_supply_fpregset,
+ sh_collect_fpregset);
+ return tdep->fpregset;
+ }
+
+ return NULL;
+}
+
+/* The register sets used in GNU/Linux ELF core-dumps are identical to
+ the register sets in `struct user' that are used for a.out
+ core-dumps. These are also used by ptrace(2). The corresponding
+ types are `elf_gregset_t' for the general-purpose registers (with
+ `elf_greg_t' the type of a single GP register) and `elf_fpregset_t'
+ for the floating-point registers.
+
+ Those types used to be available under the names `gregset_t' and
+ `fpregset_t' too, and GDB used those names in the past. But those
+ names are now used for the register sets used in the `mcontext_t'
+ type, which have a different size and layout. */
+
+/* Mapping between the general-purpose registers in `struct user'
+ format and GDB's register cache layout. */
+
+/* From <sys/reg.h>. */
+static int sh_linux_gregset_reg_offset[] =
+{
+ 0, 4, 8, 12, 16, 20, 24, 28,
+ 32, 36, 40, 44, 48, 52, 56, 60,
+
+ REG_PC*4, REG_PR*4, REG_GBR*4, -1,
+ REG_MACH*4, REG_MACL*4, REG_SR*4,
+};
+
+/* Mapping between the general-purpose registers in `struct
+ sigcontext' format and GDB's register cache layout. */
+
+/* From <asm/sigcontext.h>. */
+static int sh_linux_sc_reg_offset[] =
+{
+ 4, 8, 12, 16, 20, 24, 28, 32,
+ 36, 40, 44, 48, 52, 56, 60, 64,
+ 68, 72, 80, -1,
+ 84, 88, 76
+};
+
static void
sh_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ bfd abfd;
+
+ tdep->gregset_reg_offset = sh_linux_gregset_reg_offset;
+ tdep->gregset_num_regs = ARRAY_SIZE (sh_linux_gregset_reg_offset);
+ tdep->sizeof_gregset = 23 * 4;
+
+ tdep->jb_pc_offset = 32; /* From <bits/setjmp.h>. */
+
+ tdep->sigtramp_p = sh_linux_sigtramp_p;
+ tdep->sigcontext_addr = sh_linux_sigcontext_addr;
+ tdep->sc_reg_offset = sh_linux_sc_reg_offset;
+ tdep->sc_num_regs = ARRAY_SIZE (sh_linux_sc_reg_offset);
+
+ frame_unwind_append_unwinder(gdbarch, &sh_linux_sigtramp_frame_unwind);
+
+ /* If we have a register mapping, enable the generic core file
+ support, unless it has already been enabled. */
+ if (tdep->gregset_reg_offset
+ && !gdbarch_regset_from_core_section_p (gdbarch))
+ set_gdbarch_regset_from_core_section (gdbarch,
+ sh_linux_regset_from_core_section);
+
linux_init_abi (info, gdbarch);
/* GNU/Linux uses SVR4-style shared libraries. */
--- gdb-7.4.orig/gdb/sh-tdep.h
+++ gdb-7.4/gdb/sh-tdep.h
@@ -22,6 +22,12 @@
/* Contributed by Steve Chamberlain sac@cygnus.com. */
+struct frame_info;
+struct gdbarch;
+struct reggroup;
+struct regset;
+struct regcache;
+
/* Registers for all SH variants. Used also by sh3-rom.c. */
enum
{
@@ -30,6 +36,7 @@ enum
ARG0_REGNUM = 4,
ARGLAST_REGNUM = 7,
FP_REGNUM = 14,
+ SP_REGNUM = 15,
PC_REGNUM = 16,
PR_REGNUM = 17,
GBR_REGNUM = 18,
@@ -83,8 +90,26 @@ enum
FV_LAST_REGNUM = 79
};
+#define SH_NUM_REGS 67
+
+struct sh_frame_cache
+{
+ /* Base address. */
+ CORE_ADDR base;
+ LONGEST sp_offset;
+ CORE_ADDR pc;
+
+ /* Flag showing that a frame has been created in the prologue code. */
+ int uses_fp;
+
+ /* Saved registers. */
+ CORE_ADDR saved_regs[SH_NUM_REGS];
+ CORE_ADDR saved_sp;
+};
+
extern gdbarch_init_ftype sh64_gdbarch_init;
extern void sh64_show_regs (struct frame_info *);
+extern struct sh_frame_cache *sh_frame_cache (struct frame_info *next_frame, void **this_cache);
/* This structure describes a register in a core-file. */
struct sh_corefile_regmap
@@ -93,8 +118,32 @@ struct sh_corefile_regmap
unsigned int offset;
};
+/* sh architecture specific information. */
struct gdbarch_tdep
{
+ /* General-purpose registers. */
+ struct regset *gregset;
+ int *gregset_reg_offset;
+ int gregset_num_regs;
+ size_t sizeof_gregset;
+
+ /* Floating-point registers. */
+ struct regset *fpregset;
+ size_t sizeof_fpregset;
+
+ /* Offset of saved PC in jmp_buf. */
+ int jb_pc_offset;
+
+ /* Detect sigtramp. */
+ int (*sigtramp_p) (struct frame_info *);
+
+ /* Get address of sigcontext for sigtramp. */
+ CORE_ADDR (*sigcontext_addr) (struct frame_info *);
+
+ /* Offset of registers in `struct sigcontext'. */
+ int *sc_reg_offset;
+ int sc_num_regs;
+
/* Non-NULL when debugging from a core file. Provides the offset
where each general-purpose register is stored inside the associated
core file section. */
--- /dev/null
+++ gdb-7.4/gdb/sh-linux-nat.c
@@ -0,0 +1,269 @@
+/* Low level SH interface to ptrace, for GDB when running native.
+ Copyright (C) 2002, 2004 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+#include "defs.h"
+#include "inferior.h"
+#include "gdbcore.h"
+#include "regcache.h"
+#include "linux-nat.h"
+#include "target.h"
+#include "arch-utils.h"
+
+#include "gdb_assert.h"
+#include "gdb_string.h"
+#include <sys/ptrace.h>
+#include <sys/user.h>
+#include <sys/procfs.h>
+#include <asm/ptrace.h>
+
+/* Prototypes for supply_gregset etc. */
+#include "gregset.h"
+#include "sh-tdep.h"
+
+/* Defines ps_err_e, struct ps_prochandle. */
+#include "gdb_proc_service.h"
+
+//#include <asm/elf.h>
+
+#define SH_LINUX_NUM_REGS 40
+/* This table must line up with REGISTER_NAME in "sh-tdep.c". */
+static const int regmap[] =
+{
+ /* general registers 0-15 */
+ REG_REG0 , REG_REG0+1 , REG_REG0+2 , REG_REG0+3,
+ REG_REG0+4 , REG_REG0+5 , REG_REG0+6 , REG_REG0+7,
+ REG_REG0+8 , REG_REG0+9 , REG_REG0+10, REG_REG0+11,
+ REG_REG0+12, REG_REG0+13, REG_REG0+14, REG_REG0+15,
+ /* 16 - 22 */
+ REG_PC, REG_PR, REG_GBR, -1, REG_MACH, REG_MACL, REG_SR,
+ /* 23, 24 */
+ REG_FPUL, REG_FPSCR,
+ /* floating point registers 25 - 40 */
+ REG_FPREG0 , REG_FPREG0+1 , REG_FPREG0+2 , REG_FPREG0+3 ,
+ REG_FPREG0+4 , REG_FPREG0+5 , REG_FPREG0+6 , REG_FPREG0+7 ,
+ REG_FPREG0+8 , REG_FPREG0+9 , REG_FPREG0+10, REG_FPREG0+11,
+ REG_FPREG0+12, REG_FPREG0+13, REG_FPREG0+14, REG_FPREG0+15,
+};
+
+CORE_ADDR
+register_u_addr (CORE_ADDR blockend, int regnum)
+{
+ if (regnum < 0 || regnum >= sizeof regmap/sizeof regmap[0])
+ return (CORE_ADDR)-1;
+ return (blockend + 4 * regmap[regnum]);
+}
+
+
+/* Return the address in the core dump or inferior of register REGNO.
+ BLOCKEND is the address of the end of the user structure. */
+
+CORE_ADDR
+register_addr (int regno, CORE_ADDR blockend)
+{
+ CORE_ADDR addr;
+
+ if (regno < 0 || regno >= SH_LINUX_NUM_REGS) {
+ internal_error (__FILE__, __LINE__,
+ _("Got request for bad register number %d."), regno);
+ }
+
+ REGISTER_U_ADDR (addr, blockend, regno);
+
+ return addr;
+}
+
+/* Fetch one register. */
+
+static void
+fetch_register (struct regcache *regcache, int tid, int regno)
+{
+ int val;
+
+ if (cannot_fetch_register (regno))
+ {
+ regcache_raw_supply (regcache, regno, NULL);
+ return;
+ }
+
+ errno = 0;
+ val = ptrace (PTRACE_PEEKUSER, tid, register_addr (regno, 0), 0);
+ if (errno != 0)
+ perror_with_name (_("Couldn't get registers"));
+
+ regcache_raw_supply (regcache, regno, &val);
+}
+
+/* Store one register. */
+
+static void
+store_register (struct regcache *regcache, int tid, int regno)
+{
+ int val;
+
+ if (cannot_store_register (regno))
+ return;
+
+ errno = 0;
+ regcache_raw_collect (regcache, regno, &val);
+ ptrace (PTRACE_POKEUSER, tid, register_addr (regno, 0), val);
+ if (errno != 0)
+ perror_with_name (_("Couldn't write registers"));
+}
+
+/* Transfering the general-purpose registers between GDB, inferiors
+ and core files. */
+
+/* Fill GDB's register array with the general-purpose register values
+ in *GREGSETP. */
+
+void
+supply_gregset (struct regcache *regcache, const elf_gregset_t *gregsetp)
+{
+ elf_greg_t *regp = (elf_greg_t *) gregsetp;
+ int i;
+
+ for (i = 0; i < 23; i++)
+ if (regmap[i] == -1)
+ regcache_raw_supply (regcache, i, NULL);
+ else
+ regcache_raw_supply (regcache, i, (char *) (regp + regmap[i]));
+}
+
+/* Fill register REGNO (if it is a general-purpose register) in
+ *GREGSETPS with the value in GDB's register array. If REGNO is -1,
+ do this for all registers. */
+
+void
+fill_gregset (const struct regcache *regcache, elf_gregset_t *gregsetp, int regno)
+{
+ elf_greg_t *regp = (elf_greg_t *) gregsetp;
+ int i;
+
+ for (i = 0; i < 23; i++)
+ if (regmap[i] != -1 && (regno == -1 || regno == i))
+ regcache_raw_collect (regcache, i, (char *) (regp + regmap[i]));
+}
+
+/* Transfering floating-point registers between GDB, inferiors and cores. */
+
+/* Fill GDB's register array with the floating-point register values in
+ *FPREGSETP. */
+
+void
+supply_fpregset (struct regcache *regcache, const elf_fpregset_t *fpregsetp)
+{
+ int i;
+ long *regp = (long *)fpregsetp;
+
+ for (i = 0; i < 16; i++)
+ regcache_raw_supply (regcache, 25 + i, (char *) (regp + i));
+ regcache_raw_supply (regcache, FPUL_REGNUM, (char *) (regp + REG_FPUL - REG_FPREG0));
+ regcache_raw_supply (regcache, FPSCR_REGNUM, (char *) (regp + REG_FPSCR - REG_FPREG0));
+}
+
+/* Fill register REGNO (if it is a floating-point register) in
+ *FPREGSETP with the value in GDB's register array. If REGNO is -1,
+ do this for all registers. */
+
+void
+fill_fpregset (const struct regcache *regcache, elf_fpregset_t *fpregsetp, int regno)
+{
+ int i;
+ long *regp = (long *)fpregsetp;
+
+ for (i = 0; i < 16; i++)
+ if ((regno == -1) || (regno == i))
+ regcache_raw_collect (regcache, 25 + i, (char *) (regp + i));
+ if ((regno == -1) || regno == FPSCR_REGNUM)
+ regcache_raw_collect (regcache, FPSCR_REGNUM, (char *) (regp + REG_FPSCR - REG_FPREG0));
+ if ((regno == -1) || regno == FPUL_REGNUM)
+ regcache_raw_collect (regcache, FPUL_REGNUM, (char *) (regp + REG_FPUL - REG_FPREG0));
+}
+
+/* Transferring arbitrary registers between GDB and inferior. */
+
+/* Check if register REGNO in the child process is accessible.
+ If we are accessing registers directly via the U area, only the
+ general-purpose registers are available.
+ All registers should be accessible if we have GETREGS support. */
+
+int
+cannot_fetch_register (int regno)
+{
+ return (regno < 0 || regno >= sizeof regmap / sizeof regmap[0] || regmap[regno] == -1);
+}
+
+int
+cannot_store_register (int regno)
+{
+ return (regno < 0 || regno >= sizeof regmap / sizeof regmap[0] || regmap[regno] == -1);
+}
+
+/* Fetch register values from the inferior.
+ If REGNO is negative, do this for all registers.
+ Otherwise, REGNO specifies which register (so we can save time). */
+
+static void
+sh_linux_fetch_inferior_registers (struct target_ops *ops, struct regcache *regcache, int regno)
+{
+ int i;
+ int tid;
+
+ /* GNU/Linux LWP ID's are process ID's. */
+ if ((tid = TIDGET (inferior_ptid)) == 0)
+ tid = PIDGET (inferior_ptid); /* Not a threaded program. */
+
+ for (i = 0; i < SH_LINUX_NUM_REGS; i++)
+ if (regno == -1 || regno == i)
+ fetch_register (regcache, tid, i);
+}
+/* Store our register values back into the inferior.
+ If REGNO is negative, do this for all registers.
+ Otherwise, REGNO specifies which register (so we can save time). */
+
+static void
+sh_linux_store_inferior_registers (struct target_ops *ops, struct regcache *regcache, int regno)
+{
+ int i;
+ int tid;
+
+ /* GNU/Linux LWP ID's are process ID's. */
+ if ((tid = TIDGET (inferior_ptid)) == 0)
+ tid = PIDGET (inferior_ptid); /* Not a threaded program. */
+
+ for (i = 0; i < SH_LINUX_NUM_REGS; i++)
+ if (regno == -1 || regno == i)
+ store_register (regcache, tid, i);
+}
+
+void
+_initialize_sh_linux_nat (void)
+{
+ struct target_ops *t;
+
+ /* Fill in the generic GNU/Linux methods. */
+ t = linux_target ();
+
+ /* Add our register access methods. */
+ t->to_fetch_registers = sh_linux_fetch_inferior_registers;
+ t->to_store_registers = sh_linux_store_inferior_registers;
+
+ /* Register the target. */
+ linux_nat_add_target (t);
+}
--- gdb-7.4.orig/gdb/sh-tdep.c
+++ gdb-7.4/gdb/sh-tdep.c
@@ -23,6 +23,9 @@
sac@cygnus.com. */
#include "defs.h"
+#include "arch-utils.h"
+#include "command.h"
+#include "dummy-frame.h"
#include "frame.h"
#include "frame-base.h"
#include "frame-unwind.h"
@@ -39,6 +42,7 @@
#include "arch-utils.h"
#include "floatformat.h"
#include "regcache.h"
+#include "regset.h"
#include "doublest.h"
#include "osabi.h"
#include "reggroups.h"
@@ -71,23 +75,6 @@ static const char *sh_active_calling_con
static void (*sh_show_regs) (struct frame_info *);
-#define SH_NUM_REGS 67
-
-struct sh_frame_cache
-{
- /* Base address. */
- CORE_ADDR base;
- LONGEST sp_offset;
- CORE_ADDR pc;
-
- /* Flag showing that a frame has been created in the prologue code. */
- int uses_fp;
-
- /* Saved registers. */
- CORE_ADDR saved_regs[SH_NUM_REGS];
- CORE_ADDR saved_sp;
-};
-
static int
sh_is_renesas_calling_convention (struct type *func_type)
{
@@ -1042,7 +1029,7 @@ sh_treat_as_flt_p (struct type *type)
return 0;
/* Otherwise if the type of that member is float, the whole type is
treated as float. */
- if (TYPE_CODE (TYPE_FIELD_TYPE (type, 0)) == TYPE_CODE_FLT)
+ if (TYPE_CODE (check_typedef (TYPE_FIELD_TYPE (type, 0))) == TYPE_CODE_FLT)
return 1;
/* Otherwise it's not treated as float. */
return 0;
@@ -1092,7 +1079,7 @@ sh_push_dummy_call_fpu (struct gdbarch *
in four registers available. Loop thru args from first to last. */
for (argnum = 0; argnum < nargs; argnum++)
{
- type = value_type (args[argnum]);
+ type = check_typedef (value_type (args[argnum]));
len = TYPE_LENGTH (type);
val = sh_justify_value_in_reg (gdbarch, args[argnum], len);
@@ -2510,7 +2497,7 @@ sh_dwarf2_frame_init_reg (struct gdbarch
reg->how = DWARF2_FRAME_REG_UNDEFINED;
}
-static struct sh_frame_cache *
+struct sh_frame_cache *
sh_alloc_frame_cache (void)
{
struct sh_frame_cache *cache;
@@ -2537,7 +2524,7 @@ sh_alloc_frame_cache (void)
return cache;
}
-static struct sh_frame_cache *
+struct sh_frame_cache *
sh_frame_cache (struct frame_info *this_frame, void **this_cache)
{
struct gdbarch *gdbarch = get_frame_arch (this_frame);
@@ -2595,9 +2582,9 @@ sh_frame_cache (struct frame_info *this_
return cache;
}
-static struct value *
-sh_frame_prev_register (struct frame_info *this_frame,
- void **this_cache, int regnum)
+struct value *
+sh_frame_prev_register (struct frame_info *this_frame, void **this_cache,
+ int regnum)
{
struct gdbarch *gdbarch = get_frame_arch (this_frame);
struct sh_frame_cache *cache = sh_frame_cache (this_frame, this_cache);
@@ -2611,7 +2598,7 @@ sh_frame_prev_register (struct frame_inf
the current frame. Frob regnum so that we pull the value from
the correct place. */
if (regnum == gdbarch_pc_regnum (gdbarch))
- regnum = PR_REGNUM;
+ regnum = PR_REGNUM; /* XXX: really? */
if (regnum < SH_NUM_REGS && cache->saved_regs[regnum] != -1)
return frame_unwind_got_memory (this_frame, regnum,
@@ -2855,8 +2842,8 @@ sh_regset_from_core_section (struct gdba
static struct gdbarch *
sh_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
{
- struct gdbarch *gdbarch;
struct gdbarch_tdep *tdep;
+ struct gdbarch *gdbarch;
sh_show_regs = sh_generic_show_regs;
switch (info.bfd_arch_info->mach)
@@ -2919,6 +2906,18 @@ sh_gdbarch_init (struct gdbarch_info inf
tdep = XZALLOC (struct gdbarch_tdep);
gdbarch = gdbarch_alloc (&info, tdep);
+ /* General-purpose registers. */
+ tdep->gregset = NULL;
+ tdep->gregset_reg_offset = NULL;
+ tdep->gregset_num_regs = 23;
+ tdep->sizeof_gregset = 0;
+
+ /* Floating-point registers. */
+ tdep->fpregset = NULL;
+ tdep->sizeof_fpregset = 34*4;
+
+ tdep->jb_pc_offset = -1;
+
set_gdbarch_short_bit (gdbarch, 2 * TARGET_CHAR_BIT);
set_gdbarch_int_bit (gdbarch, 4 * TARGET_CHAR_BIT);
set_gdbarch_long_bit (gdbarch, 4 * TARGET_CHAR_BIT);
@@ -3064,10 +3063,11 @@ sh_gdbarch_init (struct gdbarch_info inf
break;
}
+ dwarf2_append_unwinders (gdbarch);
+
/* Hook in ABI-specific overrides, if they have been registered. */
gdbarch_init_osabi (info, gdbarch);
- dwarf2_append_unwinders (gdbarch);
frame_unwind_append_unwinder (gdbarch, &sh_frame_unwind);
return gdbarch;
--- /dev/null
+++ gdb-7.4/gdb/testsuite/gdb.asm/sh-linux.inc
@@ -0,0 +1,78 @@
+# You'll find a bunch of nop opcodes in the below macros. They are
+# there to keep the code correctly aligned. Be careful to maintain
+# them when changing the code.
+
+ comment "subroutine declare"
+ .purgem gdbasm_declare
+ .macro gdbasm_declare name
+ .align 1
+ .global \name
+\name:
+ .endm
+
+ comment "subroutine prologue"
+ .macro gdbasm_enter
+ mov.l r14,@-r15
+ sts.l pr,@-r15
+ mov r15,r14
+ nop
+ .endm
+
+ comment "subroutine epilogue"
+ .macro gdbasm_leave
+ mov r14,r15
+ lds.l @r15+,pr
+ mov.l @r15+,r14
+ rts
+ nop
+ nop
+ .endm
+
+ comment "subroutine end"
+ .purgem gdbasm_end
+ .macro gdbasm_end name
+ .size \name, .-_foo1
+ .align 1
+ .endm
+
+ comment "subroutine call"
+ .macro gdbasm_call subr
+ mov.l .Lconst\@,r1
+ bra .Lafterconst\@
+ nop
+ .align 2
+.Lconst\@:
+ .long \subr
+.Lafterconst\@:
+ jsr @r1
+ nop
+ .endm
+
+ .macro gdbasm_several_nops
+ nop
+ nop
+ nop
+ nop
+ .endm
+
+ comment "exit (0)"
+ .macro gdbasm_exit0
+ sleep
+ nop
+ .endm
+
+ comment "crt0 startup"
+ .macro gdbasm_startup
+ mov #0,r14
+ .endm
+
+ comment "Declare a data variable"
+ .purgem gdbasm_datavar
+ .macro gdbasm_datavar name value
+ .data
+ .align 2
+ .type \name, @object
+ .size \name, 4
+\name:
+ .long \value
+ .endm
--- gdb-7.4.orig/gdb/testsuite/gdb.asm/sh.inc
+++ gdb-7.4/gdb/testsuite/gdb.asm/sh.inc
@@ -40,9 +40,8 @@
mov.l .Lconst\@,r1
bra .Lafterconst\@
nop
- nop
-.Lconst\@:
.align 2
+.Lconst\@:
.long \subr
.align 1
.Lafterconst\@:
--- gdb-7.4.orig/gdb/testsuite/gdb.asm/asm-source.exp
+++ gdb-7.4/gdb/testsuite/gdb.asm/asm-source.exp
@@ -111,6 +111,11 @@ switch -glob -- [istarget] {
append link-flags " -m elf32ppc"
}
}
+ "sh*-linux*" {
+ set asm-arch sh-linux
+ set asm-flags "-I${srcdir}/${subdir} -I${objdir}/${subdir}"
+ set debug-flags "-gdwarf-2"
+ }
"sh*-*-*" {
set asm-arch sh
set debug-flags "-gdwarf-2"
--- gdb-7.4.orig/gdb/testsuite/gdb.base/sigall.c
+++ gdb-7.4/gdb/testsuite/gdb.base/sigall.c
@@ -1,9 +1,9 @@
#include <signal.h>
#include <unistd.h>
-#ifdef __sh__
-#define signal(a,b) /* Signals not supported on this target - make them go away */
-#endif
+
+
+
/* Signal handlers, we set breakpoints in them to make sure that the
signals really get delivered. */
--- gdb-7.4.orig/gdb/testsuite/gdb.base/signals.c
+++ gdb-7.4/gdb/testsuite/gdb.base/signals.c
@@ -3,10 +3,10 @@
#include <signal.h>
#include <unistd.h>
-#ifdef __sh__
-#define signal(a,b) /* Signals not supported on this target - make them go away */
-#define alarm(a) /* Ditto for alarm() */
-#endif
+
+
+
+
static int count = 0;
--- gdb-7.4.orig/gdb/testsuite/gdb.base/annota1.c
+++ gdb-7.4/gdb/testsuite/gdb.base/annota1.c
@@ -1,9 +1,9 @@
#include <stdio.h>
#include <signal.h>
-#ifdef __sh__
-#define signal(a,b) /* Signals not supported on this target - make them go away */
-#endif
+
+
+
#ifdef PROTOTYPES
--- gdb-7.4.orig/gdb/testsuite/gdb.base/annota3.c
+++ gdb-7.4/gdb/testsuite/gdb.base/annota3.c
@@ -1,9 +1,9 @@
#include <stdio.h>
#include <signal.h>
-#ifdef __sh__
-#define signal(a,b) /* Signals not supported on this target - make them go away */
-#endif
+
+
+
#ifdef PROTOTYPES
--- /dev/null
+++ gdb-7.4/gdb/config/sh/xm-linux.h
@@ -0,0 +1,32 @@
+/* Native support for GNU/Linux, for GDB, the GNU debugger.
+ Copyright (C) 2000 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+#ifndef XM_LINUX_H
+#define XM_LINUX_H
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+
+#define HAVE_TERMIOS
+
+#define NEED_POSIX_SETPGID
+
+/* Need R_OK etc, but USG isn't defined. */
+#include <unistd.h>
+
+#endif /* #ifndef XM_LINUX_H */
--- /dev/null
+++ gdb-7.4/gdb/config/sh/nm-linux.h
@@ -0,0 +1,54 @@
+/* Native-dependent definitions for SuperH running Linux, for GDB.
+ Copyright 2004 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
+
+#ifndef NM_LINUX_H
+#define NM_LINUX_H
+
+/* Get generic Linux native definitions. */
+#include "config/nm-linux.h"
+/* Support for the user area. */
+
+/* Return the size of the user struct. */
+extern int kernel_u_size (void);
+#define KERNEL_U_SIZE kernel_u_size()
+
+/* This is the amount to substract from u.u_ar0 to get the offset in
+ the core file of the register values. */
+#define KERNEL_U_ADDR 0
+
+#define U_REGS_OFFSET 0
+
+extern CORE_ADDR register_u_addr (CORE_ADDR blockend, int regnum);
+#define REGISTER_U_ADDR(addr, blockend, regnum) \
+ (addr) = register_u_addr (blockend, regnum)
+
+/* Override copies of {fetch,store}_inferior_registers in `infptrace.c'. */
+#define FETCH_INFERIOR_REGISTERS
+
+/* Nevertheless, define CANNOT_{FETCH,STORE}_REGISTER, because we
+ might fall back on the code `infptrace.c' (well a copy of that code
+ in `sh-linux-nat.c' for now) and we can access only the
+ general-purpose registers in that way. */
+extern int cannot_fetch_register (int regno);
+extern int cannot_store_register (int regno);
+#define CANNOT_FETCH_REGISTER(regno) cannot_fetch_register (regno)
+#define CANNOT_STORE_REGISTER(regno) cannot_store_register (regno)
+
+#endif /* NM_LINUX_H */
--- /dev/null
+++ gdb-7.4/gdb/config/sh/linux.mh
@@ -0,0 +1,8 @@
+# Host: Renesas Super-H running GNU/Linux
+NAT_FILE= nm-linux.h
+NATDEPFILES= inf-ptrace.o fork-child.o corelow.o \
+ sh-linux-nat.o \
+ proc-service.o linux-thread-db.o gcore.o \
+ linux-nat.o linux-fork.o
+
+LOADLIBES= -ldl -rdynamic
Best regards,
--
Héctor Orón
Attachment:
signature.asc
Description: Digital signature
| Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
|---|---|---|
| Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |