This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[commit] 128-bit long double for mips64-linux
- From: Daniel Jacobowitz <drow at false dot org>
- To: gdb-patches at sourceware dot org
- Date: Wed, 15 Mar 2006 11:45:07 -0500
- Subject: [commit] 128-bit long double for mips64-linux
This patch adds support for the IEEE 128-bit long double format used
on MIPS/Linux. IRIX does something different, so I didn't touch that
(I can't test IRIX).
There's something fishy about floating point results on N32 in my latest
testing, but this is still an improvement - without it we get errors
trying to print 128-bit types for which we have no floatformat set.
Tested on mips64-linux and committed.
--
Daniel Jacobowitz
CodeSourcery
2006-03-15 Daniel Jacobowitz <dan@codesourcery.com>
* mips-linux-tdep.c: Include "floatformat.h".
(mips_linux_init_abi): Use 128-bit long double for N32 and N64.
(mips_n32n64_return_value): Support 128-bit long double.
(print_gp_register_row): Don't print spaces before ignored
or floating point registers.
Index: src/gdb/mips-linux-tdep.c
===================================================================
--- src.orig/gdb/mips-linux-tdep.c 2006-03-14 15:44:19.000000000 -0500
+++ src/gdb/mips-linux-tdep.c 2006-03-14 16:48:33.000000000 -0500
@@ -32,6 +32,7 @@
#include "regcache.h"
#include "trad-frame.h"
#include "tramp-frame.h"
+#include "floatformat.h"
/* Copied from <asm/elf.h>. */
#define ELF_NGREG 45
@@ -1110,6 +1111,15 @@ mips_linux_init_abi (struct gdbarch_info
set_solib_svr4_fetch_link_map_offsets
(gdbarch, svr4_ilp32_fetch_link_map_offsets);
set_mips_linux_register_addr (gdbarch, mips64_linux_register_addr);
+ set_gdbarch_long_double_bit (gdbarch, 128);
+ /* These floatformats should probably be renamed. MIPS uses
+ the same 128-bit IEEE floating point format that IA-64 uses,
+ except that the quiet/signalling NaN bit is reversed (GDB
+ does not distinguish between quiet and signalling NaNs). */
+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
+ set_gdbarch_long_double_format (gdbarch, &floatformat_ia64_quad_big);
+ else
+ set_gdbarch_long_double_format (gdbarch, &floatformat_ia64_quad_little);
tramp_frame_prepend_unwinder (gdbarch, &mips_linux_n32_rt_sigframe);
break;
case MIPS_ABI_N64:
@@ -1118,6 +1128,15 @@ mips_linux_init_abi (struct gdbarch_info
set_solib_svr4_fetch_link_map_offsets
(gdbarch, svr4_lp64_fetch_link_map_offsets);
set_mips_linux_register_addr (gdbarch, mips64_linux_register_addr);
+ set_gdbarch_long_double_bit (gdbarch, 128);
+ /* These floatformats should probably be renamed. MIPS uses
+ the same 128-bit IEEE floating point format that IA-64 uses,
+ except that the quiet/signalling NaN bit is reversed (GDB
+ does not distinguish between quiet and signalling NaNs). */
+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
+ set_gdbarch_long_double_format (gdbarch, &floatformat_ia64_quad_big);
+ else
+ set_gdbarch_long_double_format (gdbarch, &floatformat_ia64_quad_little);
tramp_frame_prepend_unwinder (gdbarch, &mips_linux_n64_rt_sigframe);
break;
default:
Index: src/gdb/mips-tdep.c
===================================================================
--- src.orig/gdb/mips-tdep.c 2006-03-14 15:44:19.000000000 -0500
+++ src/gdb/mips-tdep.c 2006-03-14 17:05:07.000000000 -0500
@@ -1,7 +1,7 @@
/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+ 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Free Software Foundation, Inc.
Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
@@ -2911,6 +2911,24 @@ mips_n32n64_return_value (struct gdbarch
|| TYPE_LENGTH (type) > 2 * mips_abi_regsize (gdbarch))
return RETURN_VALUE_STRUCT_CONVENTION;
else if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && TYPE_LENGTH (type) == 16
+ && tdep->mips_fpu_type != MIPS_FPU_NONE)
+ {
+ /* A 128-bit floating-point value fills both $f0 and $f2. The
+ two registers are used in the same as memory order, so the
+ eight bytes with the lower memory address are in $f0. */
+ if (mips_debug)
+ fprintf_unfiltered (gdb_stderr, "Return float in $f0 and $f2\n");
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0,
+ 8, TARGET_BYTE_ORDER, readbuf, writebuf, 0);
+ mips_xfer_register (regcache,
+ NUM_REGS + mips_regnum (current_gdbarch)->fp0 + 2,
+ 8, TARGET_BYTE_ORDER, readbuf ? readbuf + 8 : readbuf,
+ writebuf ? writebuf + 8 : writebuf, 0);
+ return RETURN_VALUE_REGISTER_CONVENTION;
+ }
+ else if (TYPE_CODE (type) == TYPE_CODE_FLT
&& tdep->mips_fpu_type != MIPS_FPU_NONE)
{
/* A floating-point value belongs in the least significant part
@@ -4037,7 +4055,6 @@ print_gp_register_row (struct ui_file *f
int regnum;
/* For GP registers, we print a separate row of names above the vals */
- fprintf_filtered (file, " ");
for (col = 0, regnum = start_regnum;
col < ncols && regnum < NUM_REGS + NUM_PSEUDO_REGS; regnum++)
{
@@ -4046,11 +4063,17 @@ print_gp_register_row (struct ui_file *f
if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) ==
TYPE_CODE_FLT)
break; /* end the row: reached FP register */
+ if (col == 0)
+ fprintf_filtered (file, " ");
fprintf_filtered (file,
mips_abi_regsize (current_gdbarch) == 8 ? "%17s" : "%9s",
REGISTER_NAME (regnum));
col++;
}
+
+ if (col == 0)
+ return regnum;
+
/* print the R0 to R31 names */
if ((start_regnum % NUM_REGS) < MIPS_NUMREGS)
fprintf_filtered (file, "\n R%-4d", start_regnum % NUM_REGS);
Index: src/gdb/Makefile.in
===================================================================
--- src.orig/gdb/Makefile.in 2006-03-14 15:47:19.000000000 -0500
+++ src/gdb/Makefile.in 2006-03-14 17:06:11.000000000 -0500
@@ -2299,7 +2299,7 @@ mips-linux-nat.o: mips-linux-nat.c $(def
mips-linux-tdep.o: mips-linux-tdep.c $(defs_h) $(gdbcore_h) $(target_h) \
$(solib_svr4_h) $(osabi_h) $(mips_tdep_h) $(gdb_string_h) \
$(gdb_assert_h) $(frame_h) $(regcache_h) $(trad_frame_h) \
- $(tramp_frame_h)
+ $(tramp_frame_h) $(floatformat_h)
mips-mdebug-tdep.o: mips-mdebug-tdep.c $(defs_h) $(frame_h) $(mips_tdep_h) \
$(trad_frame_h) $(block_h) $(symtab_h) $(objfiles_h) $(elf_mips_h) \
$(elf_bfd_h) $(gdb_assert_h) $(frame_unwind_h) $(frame_base_h) \