This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
RFC: Clean up "show remote"
- From: Daniel Jacobowitz <drow at false dot org>
- To: gdb-patches at sourceware dot org
- Date: Sun, 22 Jan 2006 15:17:59 -0500
- Subject: RFC: Clean up "show remote"
Does anyone have an opinion on this patch? It's, um, a bit inelegant;
but it removes the hardcoded list of subcommands in show_remote_cmd, which
happens to be missing two. I always try "show remote" when I want to
remember the spelling of "set remote hardware-breakpoint-limit", but
it didn't include that.
Also shorten the messages a bit by removing redundancy; either the user
typed config->title, or it was prefixed to the output already.
An alternative if the code in show_remote_cmd is too ugly would be to delete
"show remote Z-packet". I think we have to leave "set remote Z-packet" -
it's five years obsoleted but never marked as deprecated and I know people
are continuing to use it - but the show command is completely redundant.
--
Daniel Jacobowitz
CodeSourcery
2006-01-22 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (remote.o): Update.
* remote.c (show_packet_config_cmd): Shorten messages.
(remote_set_cmdlist, remote_show_cmdlist): Make file-static.
(show_remote_cmd): Iterate.
(_initialize_remote): Remove remote_set_cmdlist,
remote_show_cmdlist.
Index: Makefile.in
===================================================================
RCS file: /cvs/src/src/gdb/Makefile.in,v
retrieving revision 1.777
diff -u -p -r1.777 Makefile.in
--- Makefile.in 21 Jan 2006 01:29:03 -0000 1.777
+++ Makefile.in 22 Jan 2006 20:12:52 -0000
@@ -2441,7 +2441,8 @@ remote.o: remote.c $(defs_h) $(gdb_strin
$(symfile_h) $(exceptions_h) $(target_h) $(gdbcmd_h) $(objfiles_h) \
$(gdb_stabs_h) $(gdbthread_h) $(remote_h) $(regcache_h) $(value_h) \
$(gdb_assert_h) $(event_loop_h) $(event_top_h) $(inf_loop_h) \
- $(serial_h) $(gdbcore_h) $(remote_fileio_h) $(solib_h) $(observer_h)
+ $(serial_h) $(gdbcore_h) $(remote_fileio_h) $(solib_h) $(observer_h) \
+ $(cli_decode_h) $(cli_setshow_h)
remote-e7000.o: remote-e7000.c $(defs_h) $(gdbcore_h) $(gdbarch_h) \
$(inferior_h) $(target_h) $(value_h) $(command_h) $(gdb_string_h) \
$(exceptions_h) $(gdbcmd_h) $(serial_h) $(remote_utils_h) \
Index: remote.c
===================================================================
RCS file: /cvs/src/src/gdb/remote.c,v
retrieving revision 1.198
diff -u -p -r1.198 remote.c
--- remote.c 17 Jan 2006 14:11:16 -0000 1.198
+++ remote.c 22 Jan 2006 20:12:52 -0000
@@ -43,6 +43,8 @@
#include "gdb_assert.h"
#include "observer.h"
#include "solib.h"
+#include "cli/cli-decode.h"
+#include "cli/cli-setshow.h"
#include <ctype.h>
#include <sys/time.h>
@@ -612,13 +614,13 @@ show_packet_config_cmd (struct packet_co
switch (config->detect)
{
case AUTO_BOOLEAN_AUTO:
- printf_filtered (_("Support for remote protocol `%s' (%s) packet is auto-detected, currently %s.\n"),
- config->name, config->title, support);
+ printf_filtered (_("Support for the `%s' packet is auto-detected, currently %s.\n"),
+ config->name, support);
break;
case AUTO_BOOLEAN_TRUE:
case AUTO_BOOLEAN_FALSE:
- printf_filtered (_("Support for remote protocol `%s' (%s) packet is currently %s.\n"),
- config->name, config->title, support);
+ printf_filtered (_("Support for the `%s' packet is currently %s.\n"),
+ config->name, support);
break;
}
}
@@ -5564,6 +5566,9 @@ Specify the serial device it is connecte
extended_async_remote_ops.to_mourn_inferior = extended_remote_mourn;
}
+static struct cmd_list_element *remote_set_cmdlist;
+static struct cmd_list_element *remote_show_cmdlist;
+
static void
set_remote_cmd (char *args, int from_tty)
{
@@ -5572,16 +5577,25 @@ set_remote_cmd (char *args, int from_tty
static void
show_remote_cmd (char *args, int from_tty)
{
- /* FIXME: cagney/2002-06-15: This function should iterate over
- remote_show_cmdlist for a list of sub commands to show. */
- show_remote_protocol_Z_packet_cmd (gdb_stdout, from_tty, NULL, NULL);
- show_remote_protocol_P_packet_cmd (gdb_stdout, from_tty, NULL, NULL);
- show_remote_protocol_p_packet_cmd (gdb_stdout, from_tty, NULL, NULL);
- show_remote_protocol_qSymbol_packet_cmd (gdb_stdout, from_tty, NULL, NULL);
- show_remote_protocol_vcont_packet_cmd (gdb_stdout, from_tty, NULL, NULL);
- show_remote_protocol_binary_download_cmd (gdb_stdout, from_tty, NULL, NULL);
- show_remote_protocol_qPart_auxv_packet_cmd (gdb_stdout, from_tty, NULL, NULL);
- show_remote_protocol_qGetTLSAddr_packet_cmd (gdb_stdout, from_tty, NULL, NULL);
+ /* We can't just use cmd_show_list here, because we want to skip
+ the redundant "show remote Z-packet". */
+ struct cleanup *showlist_chain;
+ struct cmd_list_element *list = remote_show_cmdlist;
+
+ showlist_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "showlist");
+ for (; list != NULL; list = list->next)
+ if (strcmp (list->name, "Z-packet") == 0)
+ continue;
+ else if (list->type == show_cmd)
+ {
+ struct cleanup *option_chain
+ = make_cleanup_ui_out_tuple_begin_end (uiout, "option");
+ ui_out_field_string (uiout, "name", list->name);
+ ui_out_text (uiout, ": ");
+ do_setshow_command ((char *) NULL, from_tty, list);
+ /* Close the tuple. */
+ do_cleanups (option_chain);
+ }
}
static void
@@ -5610,9 +5624,6 @@ remote_new_objfile (struct objfile *objf
void
_initialize_remote (void)
{
- static struct cmd_list_element *remote_set_cmdlist;
- static struct cmd_list_element *remote_show_cmdlist;
-
/* architecture specific data */
remote_gdbarch_data_handle =
gdbarch_data_register_post_init (init_remote_state);