This is the mail archive of the
gdb-patches@sources.redhat.com
mailing list for the GDB project.
Re: [gdbserver/rfa] CRIS/CRISv32 gdbserver support (part 2)
- From: Orjan Friberg <orjan dot friberg at axis dot com>
- To: Daniel Jacobowitz <drow at false dot org>
- Cc: gdb-patches at sources dot redhat dot com
- Date: Tue, 01 Feb 2005 15:30:12 +0100
- Subject: Re: [gdbserver/rfa] CRIS/CRISv32 gdbserver support (part 2)
- Organization: Axis Communications
- References: <41E7969F.3010009@axis.com> <20050130045359.GC25185@nevyn.them.org>
Daniel Jacobowitz wrote:
- cris and crisv32 appear to have, from point of view of gdbserver, not
much more in common than cris and mips. How about having
linux-crisv32-low.c instead? There can be additional file for common
code if it becomes necessary in the future.
Good idea; I split them up as suggested.
static CORE_ADDR
cris_reinsert_addr ()
{
unsigned long pc;
collect_register_by_name ("srp", &pc);
return pc;
}
I gather that you don't have PTRACE_SINGLESTEP on cris; not even on
crisv32?
On CRISv32 I do; thanks for catching this (I removed reinsert_addr for CRISv32).
#ifdef __arch_v32
void
cris_write_data_breakpoint (int bp, unsigned long start, unsigned long end)
{
switch (bp)
{
case 0:
supply_register_by_name("s3", &start);
supply_register_by_name("s4", &end);
break;
What to do about the threaded case? GDB is having so much trouble
getting it right that I'd like to make sure gdbserver does from the
start.
I guess this can be handled completely in the linux-low wrapper
functions by switching the current thread and setting watchpoints for
each. I think that is correct for all Linux targets using hardware
watchpoints, because of the nature of Linux threading.
For CRISv32, there might be an additional problem lurking in the shadows: we
treat the watchpoint registers as global (i.e., only one process at a time can
use them, and thus they are not saved/restored on context switches etc).
Anyway, is this something you want resolved before I commit the CRIS/CRISv32
support? (Here's an updated ChangeLog entry and updated patches if not.)
2005-02-01 Orjan Friberg <orjanf@axis.com>
* linux-cris-low.c: New file with support for CRIS.
* linux-crisv32-low.c: Ditto for CRISv32.
* Makefile.in (SFILES): Add linux-cris-low.c, linux-crisv32-low.c.
(clean): Add reg-cris.c and reg-crisv32.c.
Add linux-cris-low.o, linux-crisv32-low.o, reg-cris.o, reg-cris.c,
reg-crisv32.o, and reg-crisv32.c to make rules.
* configure.srv: Add cris-*-linux* and crisv32-*-linux* to list of
recognized targets.
--
Orjan Friberg
Axis Communications
/* GNU/Linux/CRIS specific low level interface, for the remote server for GDB.
Copyright 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
#include "server.h"
#include "linux-low.h"
#include <sys/ptrace.h>
/* CRISv10 */
#define cris_num_regs 32
/* Locations need to match <include/asm/arch/ptrace.h>. */
static int cris_regmap[] = {
15*4, 14*4, 13*4, 12*4,
11*4, 10*4, 9*4, 8*4,
7*4, 6*4, 5*4, 4*4,
3*4, 2*4, 23*4, 19*4,
-1, -1, -1, -1,
-1, 17*4, -1, 16*4,
-1, -1, -1, 18*4,
-1, 17*4, -1, -1
};
static int
cris_cannot_store_register (int regno)
{
if (cris_regmap[regno] == -1)
return 1;
return (regno >= cris_num_regs);
}
static int
cris_cannot_fetch_register (int regno)
{
if (cris_regmap[regno] == -1)
return 1;
return (regno >= cris_num_regs);
}
extern int debug_threads;
static CORE_ADDR
cris_get_pc ()
{
unsigned long pc;
collect_register_by_name ("pc", &pc);
if (debug_threads)
fprintf (stderr, "stop pc is %08lx\n", pc);
return pc;
}
static void
cris_set_pc (CORE_ADDR pc)
{
unsigned long newpc = pc;
supply_register_by_name ("pc", &newpc);
}
static const unsigned long cris_breakpoint = 0xe938;
#define cris_breakpoint_len 2
static int
cris_breakpoint_at (CORE_ADDR where)
{
unsigned long insn;
(*the_target->read_memory) (where, (char *) &insn, 4);
if (insn == cris_breakpoint)
return 1;
/* If necessary, recognize more trap instructions here. GDB only uses the
one. */
return 0;
}
/* We only place breakpoints in empty marker functions, and thread locking
is outside of the function. So rather than importing software single-step,
we can just run until exit. */
static CORE_ADDR
cris_reinsert_addr ()
{
unsigned long pc;
collect_register_by_name ("srp", &pc);
return pc;
}
struct linux_target_ops the_low_target = {
cris_num_regs,
cris_regmap,
cris_cannot_fetch_register,
cris_cannot_store_register,
cris_get_pc,
cris_set_pc,
(const char *) &cris_breakpoint,
cris_breakpoint_len,
cris_reinsert_addr,
0,
cris_breakpoint_at,
0,
0,
0,
0,
};
/* GNU/Linux/CRIS specific low level interface, for the remote server for GDB.
Copyright 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
#include "server.h"
#include "linux-low.h"
#include <sys/ptrace.h>
/* CRISv32 */
#define cris_num_regs 49
/* Note: Ignoring USP (having the stack pointer in two locations causes trouble
without any significant gain). */
/* Locations need to match <include/asm/arch/ptrace.h>. */
static int cris_regmap[] = {
1*4, 2*4, 3*4, 4*4,
5*4, 6*4, 7*4, 8*4,
9*4, 10*4, 11*4, 12*4,
13*4, 14*4, 24*4, 15*4,
-1, -1, -1, 16*4,
-1, 22*4, 23*4, 17*4,
-1, -1, 21*4, 20*4,
-1, 19*4, -1, 18*4,
25*4,
26*4, -1, -1, 29*4,
30*4, 31*4, 32*4, 33*4,
34*4, 35*4, 36*4, 37*4,
38*4, 39*4, 40*4, -1
};
static int
cris_cannot_store_register (int regno)
{
if (cris_regmap[regno] == -1)
return 1;
return (regno >= cris_num_regs);
}
static int
cris_cannot_fetch_register (int regno)
{
if (cris_regmap[regno] == -1)
return 1;
return (regno >= cris_num_regs);
}
extern int debug_threads;
static CORE_ADDR
cris_get_pc ()
{
unsigned long pc;
collect_register_by_name ("pc", &pc);
if (debug_threads)
fprintf (stderr, "stop pc is %08lx\n", pc);
return pc;
}
static void
cris_set_pc (CORE_ADDR pc)
{
unsigned long newpc = pc;
supply_register_by_name ("pc", &newpc);
}
static const unsigned long cris_breakpoint = 0xe938;
#define cris_breakpoint_len 2
static int
cris_breakpoint_at (CORE_ADDR where)
{
unsigned long insn;
(*the_target->read_memory) (where, (char *) &insn, 4);
if (insn == cris_breakpoint)
return 1;
/* If necessary, recognize more trap instructions here. GDB only uses the
one. */
return 0;
}
void
cris_write_data_breakpoint (int bp, unsigned long start, unsigned long end)
{
switch (bp)
{
case 0:
supply_register_by_name("s3", &start);
supply_register_by_name("s4", &end);
break;
case 1:
supply_register_by_name("s5", &start);
supply_register_by_name("s6", &end);
break;
case 2:
supply_register_by_name("s7", &start);
supply_register_by_name("s8", &end);
break;
case 3:
supply_register_by_name("s9", &start);
supply_register_by_name("s10", &end);
break;
case 4:
supply_register_by_name("s11", &start);
supply_register_by_name("s12", &end);
break;
case 5:
supply_register_by_name("s13", &start);
supply_register_by_name("s14", &end);
break;
}
}
int
cris_insert_watchpoint(char type, CORE_ADDR addr, int len)
{
int bp;
unsigned long bp_ctrl;
unsigned long start, end;
unsigned long ccs;
/* Breakpoint/watchpoint types (GDB terminology):
0 = memory breakpoint for instructions
(not supported; done via memory write instead)
1 = hardware breakpoint for instructions (not supported)
2 = write watchpoint (supported)
3 = read watchpoint (supported)
4 = access watchpoint (supported). */
if (type < '2' || type > '4') {
/* Unsupported. */
return 1;
}
/* Read watchpoints are set as access watchpoints, because of GDB's
inability to deal with pure read watchpoints. */
if (type == '3')
type = '4';
/* Get the configuration register. */
collect_register_by_name("s0", &bp_ctrl);
/* The watchpoint allocation scheme is the simplest possible.
For example, if a region is watched for read and
a write watch is requested, a new watchpoint will
be used. Also, if a watch for a region that is already
covered by one or more existing watchpoints, a new
watchpoint will be used. */
/* First, find a free data watchpoint. */
for (bp = 0; bp < 6; bp++) {
/* Each data watchpoint's control registers occupy 2 bits
(hence the 3), starting at bit 2 for D0 (hence the 2)
with 4 bits between for each watchpoint (yes, the 4). */
if (!(bp_ctrl & (0x3 << (2 + (bp * 4))))) {
break;
}
}
if (bp > 5) {
/* We're out of watchpoints. */
return -1;
}
/* Configure the control register first. */
if (type == '3' || type == '4') {
/* Trigger on read. */
bp_ctrl |= (1 << (2 + bp * 4));
}
if (type == '2' || type == '4') {
/* Trigger on write. */
bp_ctrl |= (2 << (2 + bp * 4));
}
/* Setup the configuration register. */
supply_register_by_name("s0", &bp_ctrl);
/* Setup the range. */
start = addr;
end = addr + len - 1;
/* Configure the watchpoint register. */
cris_write_data_breakpoint (bp, start, end);
collect_register_by_name("ccs", &ccs);
/* Set the S1 flag to enable watchpoints. */
ccs |= (1 << 19);
supply_register_by_name("ccs", &ccs);
return 0;
}
int
cris_remove_watchpoint(char type, CORE_ADDR addr, int len)
{
int bp;
unsigned long bp_ctrl;
unsigned long start, end;
/* Breakpoint/watchpoint types:
0 = memory breakpoint for instructions
(not supported; done via memory write instead)
1 = hardware breakpoint for instructions (not supported)
2 = write watchpoint (supported)
3 = read watchpoint (supported)
4 = access watchpoint (supported). */
if (type < '2' || type > '4') {
return -1;
}
/* Read watchpoints are set as access watchpoints, because of GDB's
inability to deal with pure read watchpoints. */
if (type == '3')
type = '4';
/* Get the configuration register. */
collect_register_by_name("s0", &bp_ctrl);
/* Try to find a watchpoint that is configured for the
specified range, then check that read/write also matches. */
/* Ugly pointer arithmetic, since I cannot rely on a
single switch (addr) as there may be several watchpoints with
the same start address for example. */
unsigned long bp_d_regs[12];
/* Get all range registers to simplify search. */
collect_register_by_name("s3", &bp_d_regs[0]);
collect_register_by_name("s4", &bp_d_regs[1]);
collect_register_by_name("s5", &bp_d_regs[2]);
collect_register_by_name("s6", &bp_d_regs[3]);
collect_register_by_name("s7", &bp_d_regs[4]);
collect_register_by_name("s8", &bp_d_regs[5]);
collect_register_by_name("s9", &bp_d_regs[6]);
collect_register_by_name("s10", &bp_d_regs[7]);
collect_register_by_name("s11", &bp_d_regs[8]);
collect_register_by_name("s12", &bp_d_regs[9]);
collect_register_by_name("s13", &bp_d_regs[10]);
collect_register_by_name("s14", &bp_d_regs[11]);
for (bp = 0; bp < 6; bp++) {
if (bp_d_regs[bp * 2] == addr
&& bp_d_regs[bp * 2 + 1] == (addr + len - 1)) {
/* Matching range. */
int bitpos = 2 + bp * 4;
int rw_bits;
/* Read/write bits for this BP. */
rw_bits = (bp_ctrl & (0x3 << bitpos)) >> bitpos;
if ((type == '3' && rw_bits == 0x1)
|| (type == '2' && rw_bits == 0x2)
|| (type == '4' && rw_bits == 0x3)) {
/* Read/write matched. */
break;
}
}
}
if (bp > 5) {
/* No watchpoint matched. */
return -1;
}
/* Found a matching watchpoint. Now, deconfigure it by
both disabling read/write in bp_ctrl and zeroing its
start/end addresses. */
bp_ctrl &= ~(3 << (2 + (bp * 4)));
/* Setup the configuration register. */
supply_register_by_name("s0", &bp_ctrl);
start = end = 0;
/* Configure the watchpoint register. */
cris_write_data_breakpoint (bp, start, end);
/* Note that we don't clear the S1 flag here. It's done when continuing. */
return 0;
}
int
cris_stopped_by_watchpoint ()
{
unsigned long exs;
collect_register_by_name ("exs", &exs);
return (((exs & 0xff00) >> 8) == 0xc);
}
CORE_ADDR
cris_stopped_data_address ()
{
unsigned long eda;
collect_register_by_name ("eda", &eda);
/* FIXME: Possibly adjust to match watched range. */
return eda;
}
static void
cris_fill_gregset (void *buf)
{
int i;
for (i = 0; i < cris_num_regs; i++)
if (cris_regmap[i] != -1)
collect_register (i, ((char *) buf) + cris_regmap[i]);
}
static void
cris_store_gregset (const void *buf)
{
int i;
for (i = 0; i < cris_num_regs; i++)
if (cris_regmap[i] != -1)
supply_register (i, ((char *) buf) + cris_regmap[i]);
}
typedef unsigned long elf_gregset_t[cris_num_regs];
struct regset_info target_regsets[] = {
{ PTRACE_GETREGS, PTRACE_SETREGS, sizeof (elf_gregset_t),
GENERAL_REGS, cris_fill_gregset, cris_store_gregset },
{ 0, 0, -1, -1, NULL, NULL }
};
struct linux_target_ops the_low_target = {
cris_num_regs,
cris_regmap,
cris_cannot_fetch_register,
cris_cannot_store_register,
cris_get_pc,
cris_set_pc,
(const char *) &cris_breakpoint,
cris_breakpoint_len,
0,
0,
cris_breakpoint_at,
cris_insert_watchpoint,
cris_remove_watchpoint,
cris_stopped_by_watchpoint,
cris_stopped_data_address,
};
Index: Makefile.in
===================================================================
RCS file: /cvs/src/src/gdb/gdbserver/Makefile.in,v
retrieving revision 1.27
diff -u -p -r1.27 Makefile.in
--- Makefile.in 16 Oct 2004 16:18:54 -0000 1.27
+++ Makefile.in 1 Feb 2005 14:27:15 -0000
@@ -118,7 +118,8 @@ SFILES= $(srcdir)/gdbreplay.c $(srcdir)/
$(srcdir)/mem-break.c $(srcdir)/proc-service.c $(srcdir)/regcache.c \
$(srcdir)/remote-utils.c $(srcdir)/server.c $(srcdir)/target.c \
$(srcdir)/thread-db.c $(srcdir)/utils.c \
- $(srcdir)/linux-arm-low.c $(srcdir)/linux-i386-low.c \
+ $(srcdir)/linux-arm-low.c $(srcdir)/linux-cris-low.c \
+ $(srcdir)/linux-crisv32-low.c $(srcdir)/linux-i386-low.c \
$(srcdir)/i387-fp.c \
$(srcdir)/linux-ia64-low.c $(srcdir)/linux-low.c \
$(srcdir)/linux-m68k-low.c $(srcdir)/linux-mips-low.c \
@@ -200,6 +201,7 @@ clean:
rm -f gdbserver gdbreplay core make.log
rm -f reg-arm.c reg-i386.c reg-ia64.c reg-m68k.c reg-mips.c
rm -f reg-ppc.c reg-sh.c reg-x86-64.c reg-i386-linux.c
+ rm -f reg-cris.c reg-crisv32.c
maintainer-clean realclean distclean: clean
rm -f nm.h tm.h xm.h config.status config.h stamp-h config.log
@@ -261,6 +263,8 @@ linux-low.o: linux-low.c $(linux_low_h)
$(CC) -c $(CPPFLAGS) $(INTERNAL_CFLAGS) $< @USE_THREAD_DB@
linux-arm-low.o: linux-arm-low.c $(linux_low_h) $(server_h)
+linux-cris-low.o: linux-cris-low.c $(linux_low_h) $(server_h)
+linux-crisv32-low.o: linux-crisv32-low.c $(linux_low_h) $(server_h)
linux-i386-low.o: linux-i386-low.c $(linux_low_h) $(server_h)
linux-ia64-low.o: linux-ia64-low.c $(linux_low_h) $(server_h)
linux-mips-low.o: linux-mips-low.c $(linux_low_h) $(server_h)
@@ -272,6 +276,12 @@ linux-x86-64-low.o: linux-x86-64-low.c $
reg-arm.o : reg-arm.c $(regdef_h)
reg-arm.c : $(srcdir)/../regformats/reg-arm.dat $(regdat_sh)
sh $(regdat_sh) $(srcdir)/../regformats/reg-arm.dat reg-arm.c
+reg-cris.o : reg-cris.c $(regdef_h)
+reg-cris.c : $(srcdir)/../regformats/reg-cris.dat $(regdat_sh)
+ sh $(regdat_sh) $(srcdir)/../regformats/reg-cris.dat reg-cris.c
+reg-crisv32.o : reg-crisv32.c $(regdef_h)
+reg-crisv32.c : $(srcdir)/../regformats/reg-crisv32.dat $(regdat_sh)
+ sh $(regdat_sh) $(srcdir)/../regformats/reg-crisv32.dat reg-crisv32.c
reg-i386.o : reg-i386.c $(regdef_h)
reg-i386.c : $(srcdir)/../regformats/reg-i386.dat $(regdat_sh)
sh $(regdat_sh) $(srcdir)/../regformats/reg-i386.dat reg-i386.c
Index: configure.srv
===================================================================
RCS file: /cvs/src/src/gdb/gdbserver/configure.srv,v
retrieving revision 1.8
diff -u -p -r1.8 configure.srv
--- configure.srv 21 Nov 2004 03:09:39 -0000 1.8
+++ configure.srv 1 Feb 2005 14:27:16 -0000
@@ -23,6 +23,17 @@ case "${target}" in
srv_linux_usrregs=yes
srv_linux_thread_db=yes
;;
+ crisv32-*-linux*) srv_regobj=reg-crisv32.o
+ srv_tgtobj="linux-low.o linux-crisv32-low.o"
+ srv_linux_usrregs=yes
+ srv_linux_regsets=yes
+ srv_linux_thread_db=yes
+ ;;
+ cris-*-linux*) srv_regobj=reg-cris.o
+ srv_tgtobj="linux-low.o linux-cris-low.o"
+ srv_linux_usrregs=yes
+ srv_linux_thread_db=yes
+ ;;
i[34567]86-*-linux*) srv_regobj=reg-i386-linux.o
srv_tgtobj="linux-low.o linux-i386-low.o i387-fp.o"
srv_linux_usrregs=yes