This is the mail archive of the crossgcc@sourceware.org mailing list for the crossgcc project.

See crosstool-NG for lots more information.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: crosstool-ng 1.16.0: libtool problem

From: Zvi Vered <veredz72 at gmail dot com>
To: Bryan Hundven <bryanhundven at gmail dot com>
Cc: crossgcc at sourceware dot org
Date: Sun, 7 Oct 2012 08:12:07 +0200
Subject: Re: crosstool-ng 1.16.0: libtool problem
References: <CABRndgw7ocC2uJU4UjmXa7bcgiB=tRxVnus6fAZ4eENyHkM7FQ@mail.gmail.com> <CAJ+oik2_rasvFpEnN5UfaYnNPwc6RJ93G0Bz=aM-RxWcur=CUg@mail.gmail.com> <CABRndgzVvQo2UJfYK25O+=s8wG1xW8fYNC+iWhJmYMtFtsNAzQ@mail.gmail.com> <CAJ+oik10W-uCAGg_ueCDGt9jV-uBx_k3jD22Croktc07+_jqVA@mail.gmail.com> <CABRndgzDejP-nXiNf3ygmzCK2ZXY=xosG0DWd7QaxUjaxHy=vQ@mail.gmail.com> <CAJ+oik1y4S90MLdtx5om++g+sfLFT_BsEQuAb8xBKYF+oqtb0Q@mail.gmail.com> <CABRndgykKr-SMg8YubO0V=2S=70_CU6Awt=6-HFeDPa9D4M8QQ@mail.gmail.com> <CAJ+oik1EPadDcQhTqAYPN_3FwjVYJ1RuXyOEZn0zeoBPwNWN8Q@mail.gmail.com>

Hi Bryan,

I just sent the file using https://www.transferbigfiles.com.

Thanks,
Zvika

On Sun, Oct 7, 2012 at 6:27 AM, Bryan Hundven <bryanhundven@gmail.com> wrote:
> On Sat, Oct 6, 2012 at 8:38 PM, Zvi Vered <veredz72@gmail.com> wrote:
>> Hi Bryan,
>>
>> Attached the new .config
>> Now I got the following error:
>
> Zvika,
>
> Please post the full log to pastebin or similar site.
>
> Thanks,
>
> -Bryan
>
>> [ALL  ]    ./libtool: line 466: CDPATH: command not found
>> [ALL  ]    ./libtool: line 466: CDPATH: command not found
>> [ALL  ]    ./libtool: line 1144: func_opt_split: command not found
>> [ALL  ]    libtool: Version mismatch error.  This is libtool 2.2.6
>> Debian-2.2.6a-1ubuntu1, but the
>> [ALL  ]    libtool: definition of this LT_INIT comes from an older release.
>> [ALL  ]    libtool: You should recreate aclocal.m4 with macros from
>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1
>> [ALL  ]    libtool: and run autoconf again.
>> [ERROR]    make[1]: *** [block.lo] Error 1
>> [ALL  ]    make[1]: *** Waiting for unfinished jobs....
>> [ALL  ]    ./libtool: line 466: CDPATH: command not found
>> [ALL  ]    ./libtool: line 1144: func_opt_split: command not found
>> [ALL  ]    libtool: Version mismatch error.  This is libtool 2.2.6
>> Debian-2.2.6a-1ubuntu1, but the
>> [ALL  ]    libtool: definition of this LT_INIT comes from an older release.
>> [ALL  ]    libtool: You should recreate aclocal.m4 with macros from
>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1
>> [ALL  ]    libtool: and run autoconf again.
>> [ERROR]    make[1]: *** [names.lo] Error 1
>> [ALL  ]    ./libtool: line 1144: func_opt_split: command not found
>> [ALL  ]    libtool: Version mismatch error.  This is libtool 2.2.6
>> Debian-2.2.6a-1ubuntu1, but the
>> [ALL  ]    libtool: definition of this LT_INIT comes from an older release.
>> [ALL  ]    libtool: You should recreate aclocal.m4 with macros from
>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1
>> [ALL  ]    libtool: and run autoconf again.
>> [ERROR]    make[1]: *** [loop.lo] Error 1
>> [ALL  ]    make[1]: Leaving directory
>> `/home/zvivered/GNU/ct-ng-1.16.0/bin/.build/i686-nptl-linux-gnu/build/build-cloog-ppl-host-i686-build_pc-linux-gnu'
>> [ERROR]
>> [ERROR]  >>
>> [ERROR]  >>  Build failed in step 'Installing CLooG/PPL for host'
>> [ERROR]  >>        called in step '(top-level)'
>> [ERROR]  >>
>> [ERROR]  >>  Error happened in: CT_DoExecLog[scripts/functions@158]
>> [ERROR]  >>        called from:
>> do_cloog_backend[scripts/build/companion_libs/cloog.sh@111]
>> [ERROR]  >>        called from:
>> do_cloog_for_host[scripts/build/companion_libs/cloog.sh@72]
>> [ERROR]  >>        called from: main[scripts/crosstool-NG.sh@598]
>> [ERROR]  >>
>> [ERROR]  >>  For more info on this error, look at the file: 'build.log'
>> [ERROR]  >>  There is a list of known issues, some with workarounds, in:
>> [ERROR]  >>
>> '/home/zvivered/GNU/ct-ng-1.16.0/share/doc/crosstool-ng/ct-ng.1.16.0/B
>> - Known issues.txt'
>> [ERROR]
>>
>> I did not install libtool manually. I have one libtool installed by CENTOS:
>> ltmain.sh (GNU libtool) 1.5.22 (1.1220.2.365 2005/12/18 22:14:06)
>>
>> I installed automake 1.10, autoconf 2.60 ***manually*** because
>> crosstool-ng failed at earlier stages. (./configure, make, make
>> install). But when I checked "companion tools", crosstool should
>> ignore them. Am I right ?
>>
>> Can you help ?
>>
>> Thanks,
>> Zvika
>>
>>
>> On Sun, Oct 7, 2012 at 3:24 AM, Bryan Hundven <bryanhundven@gmail.com> wrote:
>>> Zvika
>>>
>>> On Sat, Oct 6, 2012 at 4:23 PM, Zvi Vered <veredz72@gmail.com> wrote:
>>>> Hi Bryan,
>>>>
>>>> Did you mean:
>>>> ./configure --prefix=$HOME/GNU/ct-ng-1.16.0 --without-automake
>>>> --without-libtool --without-libtoolize
>>>> ?
>>>
>>> No, It's in 'ct-ng menuconfig'. You should find it under the
>>> "companion tools" menu.
>>>
>>>> But now I got the following error:
>>>>
>>>> Already extracted 'linux-3.4.7'
>>>> [DEBUG]    Already patched 'linux-3.4.7'
>>>> [DEBUG]    Already extracted 'gmp-4.3.2'
>>>> [DEBUG]    Already patched 'gmp-4.3.2'
>>>> [DEBUG]    Already extracted 'mpfr-2.4.2'
>>>> [DEBUG]    Already patched 'mpfr-2.4.2'
>>>> [DEBUG]    Running autoreconf
>>>> [DEBUG]    ==> Executing: 'autoreconf'
>>>> [ERROR]    acinclude.m4:26: error: Autoconf version 2.60 or higher is required
>>>> [ALL  ]    acinclude.m4:26: the top level
>>>> [ALL  ]    autom4te: /usr/bin/m4 failed with exit status: 63
>>>> [ALL  ]    aclocal: autom4te failed with exit status: 63
>>>> [ALL  ]    autoreconf: aclocal failed with exit status: 63
>>>> [ERROR]
>>>>
>>>> I ran "yum install autoconf" and it installs autoconf 2.59
>>>>
>>>> What autoconf should I install and how ?
>>>>
>>>> Thanks,
>>>> Zvika
>>>>
>>>> On Sat, Oct 6, 2012 at 9:05 PM, Bryan Hundven <bryanhundven@gmail.com> wrote:
>>>>> Zvi,
>>>>>
>>>>> On Sat, Oct 6, 2012 at 12:02 PM, Zvi Vered <veredz72@gmail.com> wrote:
>>>>>> Dear Mr. Hundven,
>>>>>
>>>>> My name is Bryan. ;)
>>>>>
>>>>>>
>>>>>> How can I set ct-ng to use "companion tools bundled with ct-ng" ?
>>>>>
>>>>> Read the documentation:
>>>>>
>>>>> http://crosstool-ng.org/hg/crosstool-ng/raw-file/43ace4bb005e/docs/3%20-%20Configuring%20a%20toolchain.txt
>>>>>
>>>>>> The output of "libtool --version" is:
>>>>>> ltmain.sh (GNU libtool) 1.5.22 (1.1220.2.365 2005/12/18 22:14:06)
>>>>>> I used "yum install" to install it.
>>>>>>
>>>>>> This is weird. According to .configure --help, the minimum libtool
>>>>>> version should be:
>>>>>>  1.5.26
>>>>>> But running .configure does not alert on a libtool problem.
>>>>>> Can this cause the problem ?
>>>>>>
>>>>>> I tried pastebin but I should be a PRO user to paste all build.log
>>>>>>
>>>>>> You help is highly appreciated.
>>>>>>
>>>>>> Thanks,
>>>>>> Zvika
>>>>>>
>>>>>> On Sat, Oct 6, 2012 at 10:10 AM, Bryan Hundven <bryanhundven@gmail.com> wrote:
>>>>>>> On Fri, Oct 5, 2012 at 10:14 PM, Zvi Vered <veredz72@gmail.com> wrote:
>>>>>>>> Hello,
>>>>>>>>
>>>>>>>> I'm using crosstool-ng 1.16.0 to create a toolchain for
>>>>>>>> "i686-nptl-linux-gnu" under centos 5.3
>>>>>>>>
>>>>>>>> I got the following error:
>>>>>>>>
>>>>>>>> [ALL  ]    ./libtool: line 466: CDPATH: command not found
>>>>>>>> [ALL  ]    ./libtool: line 466: CDPATH: command not found
>>>>>>>> [ALL  ]    ./libtool: line 1144: func_opt_split: command not found
>>>>>>>> [ALL  ]    libtool: Version mismatch error.  This is libtool 2.2.6
>>>>>>>> Debian-2.2.6a-1ubuntu1, but the
>>>>>>>> [ALL  ]    libtool: definition of this LT_INIT comes from an older release.
>>>>>>>> [ALL  ]    libtool: You should recreate aclocal.m4 with macros from
>>>>>>>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1
>>>>>>>> [ALL  ]    libtool: and run autoconf again.
>>>>>>>> [ERROR]    make[1]: *** [loop.lo] Error 1
>>>>>>>> [ALL  ]    make[1]: *** Waiting for unfinished jobs....
>>>>>>>> [ALL  ]    ./libtool: line 466: CDPATH: command not found
>>>>>>>> [ALL  ]    ./libtool: line 1144: func_opt_split: command not found
>>>>>>>> [ALL  ]    libtool: Version mismatch error.  This is libtool 2.2.6
>>>>>>>> Debian-2.2.6a-1ubuntu1, but the
>>>>>>>> [ALL  ]    libtool: definition of this LT_INIT comes from an older release.
>>>>>>>> [ALL  ]    libtool: You should recreate aclocal.m4 with macros from
>>>>>>>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1
>>>>>>>> [ALL  ]    libtool: and run autoconf again.
>>>>>>>> [ERROR]    make[1]: *** [block.lo] Error 1
>>>>>>>> [ALL  ]    ./libtool: line 1144: func_opt_split: command not found
>>>>>>>> [ALL  ]    libtool: Version mismatch error.  This is libtool 2.2.6
>>>>>>>> Debian-2.2.6a-1ubuntu1, but the
>>>>>>>> [ALL  ]    libtool: definition of this LT_INIT comes from an older release.
>>>>>>>> [ALL  ]    libtool: You should recreate aclocal.m4 with macros from
>>>>>>>> libtool 2.2.6 Debian-2.2.6a-1ubuntu1
>>>>>>>> [ALL  ]    libtool: and run autoconf again.
>>>>>>>> [ERROR]    make[1]: *** [names.lo] Error 1
>>>>>>>> [ALL  ]    make[1]: Leaving directory
>>>>>>>> `/home/zvivered/GNU/ct-ng-1.16.0/working/i686-nptl-linux-gnu/build/build-cloog-ppl-host-i686-build_pc-linux-gnu'
>>>>>>>> [ERROR]
>>>>>>>> [ERROR]  >>
>>>>>>>> [ERROR]  >>  Build failed in step 'Installing CLooG/PPL for host'
>>>>>>>> [ERROR]  >>        called in step '(top-level)'
>>>>>>>> [ERROR]  >>
>>>>>>>> [ERROR]  >>  Error happened in: CT_DoExecLog[scripts/functions@158]
>>>>>>>> [ERROR]  >>        called from:
>>>>>>>> do_cloog_backend[scripts/build/companion_libs/cloog.sh@111]
>>>>>>>> [ERROR]  >>        called from:
>>>>>>>> do_cloog_for_host[scripts/build/companion_libs/cloog.sh@72]
>>>>>>>> [ERROR]  >>        called from: main[scripts/crosstool-NG.sh@598]
>>>>>>>> [ERROR]  >>
>>>>>>>> [ERROR]  >>  For more info on this error, look at the file: 'build.log'
>>>>>>>> [ERROR]  >>  There is a list of known issues, some with workarounds, in:
>>>>>>>> [ERROR]  >>
>>>>>>>> '/home/zvivered/GNU/ct-ng-1.16.0/share/doc/crosstool-ng/ct-ng.1.16.0/B
>>>>>>>> - Known issues.txt'
>>>>>>>> [ERROR]
>>>>>>>> [ERROR]  (elapsed: 6:05.48)
>>>>>>>>
>>>>>>>> Attached config.ng (copy of .config).
>>>>>>>>
>>>>>>>> Can you help find the problem ?
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> Zvika
>>>>>>>>
>>>>>>>> --
>>>>>>>> For unsubscribe information see http://sourceware.org/lists.html#faq
>>>>>>>
>>>>>>> Zvi,
>>>>>>>
>>>>>>> Having the full log - posted to pastebin, or similar site, or hosted
>>>>>>> on some other web site to save space on the mailing list - would also
>>>>>>> be very helpful in this situation.
>>>>>>>
>>>>>>> From what I read, it looks like you have two different versions of
>>>>>>> libtool in the same path!?! weird!
>>>>>>>
>>>>>>> Have you tried cloog 0.15.11?
>>>>>>>
>>>>>>> As I said in my previous message about automake, try using the
>>>>>>> companion tools bundled with ct-ng.
>>>>>>> ( http://sourceware.org/ml/crossgcc/2012-10/msg00014.html )
>>>>>>>
>>>>>>>># CT_COMP_TOOLS is not set
>>>>>>>
>>>>>>> Not all systems are compatible with ct-ng, which is why we provide m4,
>>>>>>> autoconf, automake, libtool, and make.
>>>>>>>
>>>>>>> Also, this only seems to be a problem with cloog-ppl, have you also
>>>>>>> tried google searching around for similar cloog build errors? This
>>>>>>> doesn't look like it would be specific to crosstool-ng, but having the
>>>>>>> full build log might prove that otherwise.
>>>>>>>
>>>>>>> -Bryan
>>>>>
>>>>> -Bryan
>>>
>>> -Bryan

--
For unsubscribe information see http://sourceware.org/lists.html#faq

Follow-Ups:
- Re: crosstool-ng 1.16.0: libtool problem
  - From: Bryan Hundven

References:
- crosstool-ng 1.16.0: libtool problem
  - From: Zvi Vered
- Re: crosstool-ng 1.16.0: libtool problem
  - From: Bryan Hundven
- Re: crosstool-ng 1.16.0: libtool problem
  - From: Zvi Vered
- Re: crosstool-ng 1.16.0: libtool problem
  - From: Bryan Hundven
- Re: crosstool-ng 1.16.0: libtool problem
  - From: Zvi Vered
- Re: crosstool-ng 1.16.0: libtool problem
  - From: Bryan Hundven
- Re: crosstool-ng 1.16.0: libtool problem
  - From: Zvi Vered
- Re: crosstool-ng 1.16.0: libtool problem
  - From: Bryan Hundven

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]