This is the mail archive of the crossgcc@sources.redhat.com mailing list for the crossgcc project.

See the CrossGCC FAQ for lots more information.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

RE: Preprocessing Assembly



> -----Original Message-----
> From: Dhananjay R. Deshpande [mailto:dhananjayd@kpit.com]
> Sent: Thursday, September 12, 2002 3:03 PM
> To: Dhananjay R. Deshpande; Bruce Adams; cygwin@cygwin.com; 
> crossgcc@sources.redhat.com
> Subject: RE: Preprocessing Assembly
> 
> > > Is there a way to force gcc to preprocess assembly using a switch.
> > 
> > Yes. Use "-x assembler-with-cop" switch.
> 
> Typo.. Use "-x assembler-with-cpp" switch.

Ah ok.  Missed that one when I RTFM.  You don't need the space though. One
teensy flaw.  
The prebuilt rtems compiler I'm using (being stuck unable to build my own
for now) can't find cpp0.  I copied that into C:\cygwin\opt\rtems\bin from
C:\cygwin\opt\rtems\lib\gcc-lib\m68k-rtems\2.95.3 and it works. However, I
now have syntax errors in my assembly but the line numbers refer to the
preprocessed output rather than the original file.
Closer inspection of my workaround to use gcc -E reveals something more
insidious and slightly 
surprising.  Gcc -E produces no output at all.  This seems to go for both
the cygwin native gcc and
the rtems one.  If I run cpp0.exe directly I get output.  Neither cpp or gcc
put anything on stdout.
I know the preprocessor works (people would have noticed if it didn't!) so
what am I Missing?  	
						Regards,
							  Bruce A.



============================================================================
 Any opinions expressed in this e-mail are those of the individual and not
 necessarily those of Tyco Electronic Product Group.

 Any prices for the supply of goods or services are only valid if supported
 by a formal written quotation.

 This e-mail and any files transmitted with it, including replies and
 forwarded copies (which may contain alterations) subsequently transmitted
 from Tyco Electronic Product Group are confidential and solely for the use
 of the intended recipient.

 If you are not the intended recipient or the person responsible for
 delivery to the intended recipient, be advised that you have received this
 e-mail in error and that any use is strictly prohibited.  In this event,
 please notify us via e-mail at 'helpdesk.tepg@tycoint.com' or telephone on 
 0121 255 6499 and then delete the e-mail and any copies of it.
============================================================================






------
Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sources.redhat.com


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]