This is the mail archive of the crossgcc@sourceware.cygnus.com mailing list for the crossgcc project.
See the CrossGCC FAQ for lots more infromation.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
I have been reading through the archives (which have been very helpful) -- but I am still having problems building the cross-compiler I want. My setup is: gcc-2.95.2 glibc-2.1.3 binutils-2.9.1 Binutils seems to build with no problems. My configure line for gcc (from a build directory) is: ../gcc-2.95.2/configure --target=powerpc-gnu-linux --prefix=/usr/crosslinux \ --exec-prefix=/usr/crosslinux --program-suffix=linppc -v --enable-languages=c \ --with-headers=/usr/local/temp/glibc-2.1.3/include The problem I have is exactly the same as what Brendan Simon reported on January 24th: The --with-headers line copies everything from glibc-2.1.3/include into a sys-include directory (in my case: /usr/crosslinux/powerpc-gnu-linux/sys-include) But some of these files reference include files that are one level up. i.e. sys/cdefs.h is a single line file that includes <misc/sys/cdefs.h> This misc directory is in the glibc-2.1.3 main directory -- but I'm not sure how to reference it. I don't think I should set my --with-headers= argument to reference the whole glibc-2.1.3 directory! Any ideas? (output below is snipped from the output of >make LANGUAGES=c all install -------------------- make[3]: Entering directory `/usr/local/temp/gcc-build/gcc' rm -f tmplibgcc2.a for name in _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi _fixtfdi _fixunstfdi _floatditf __gcc_bcmp _varargs __dummy _eprintf _bb _shtab _clear_cache _trampoline __main _exit _ctors _pure; \ do \ echo ${name}; \ /usr/local/temp/gcc-build/gcc/xgcc -B/usr/local/temp/gcc-build/gcc/ -B/usr/crosslinux/powerpc-gnu-linux/bin/ -I/usr/crosslinux/powerpc-gnu-linux/include -O2 -DCROSS_COMPILE -DIN_GCC -DHAIFA -g -O2 -I./include -fPIC -g1 -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -Dinhibit_libc -mstrict-align -I. -I../../gcc-2.95.2/gcc -I../../gcc-2.95.2/gcc/config -I../../gcc-2.95.2/gcc/../include -c -DL${name} \ ../../gcc-2.95.2/gcc/libgcc2.c -o ${name}.o; \ if [ $? -eq 0 ] ; then true; else exit 1; fi; \ arlinppc rc tmplibgcc2.a ${name}.o; \ rm -f ${name}.o; \ done _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf _fixunsdfsi In file included from /usr/crosslinux/lib/gcc-lib/powerpc-gnu-linux/2.95.2/../../../../powerpc-gnu-linux/sys-include/featu res.h:250, from /usr/crosslinux/lib/gcc-lib/powerpc-gnu-linux/2.95.2/../../../../powerpc-gnu-linux/sys-include/limit s.h:26, from /usr/local/temp/gcc-build/gcc/include/limits.h:117, from include/syslimits.h:7, from include/limits.h:11, from ../../gcc-2.95.2/gcc/libgcc2.c:1105: /usr/crosslinux/lib/gcc-lib/powerpc-gnu-linux/2.95.2/../../../../powerpc-gnu-linux/sys-include/sys/c defs.h:1: misc/sys/cdefs.h: No such file or directory Please help! bob ----------- This message was sent by XFMail at 16:43:09 on 12-Jun-00 by: Bob Robison Southwest Research Institute,http://www.swri.org Staff Engineer Signal Exploitation & Geolocation Division brobison@swri.org Phone:(210)522-3935/Fax:(210)522-2709 <>< <>< <>< <>< <>< <>< <>< <>< <>< Col 3:2 ------ Want more information? See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/ Want to unsubscribe? Send a note to crossgcc-unsubscribe@sourceware.cygnus.com
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |