This is the mail archive of the crossgcc@sourceware.cygnus.com mailing list for the crossgcc project.
See the CrossGCC FAQ for lots more infromation.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Hi Brendan, At 17:46 00-1-4 +1100, Brendan J Simon wrote: >Have you configured binutils for a29k-coff and installed it. yes, built successfully. my binutils's config.status file: #!/bin/sh # This file was generated automatically by configure. Do not edit. # This directory was configured as follows: ../binutils-2.9.1/configure --host=i586-pc-linux-gnu --target=a29k-coff \ --prefix=/sw/newtools -v --norecursion # Is $prefix/bin (eg. >/usr/local/bin) in your path. If not use something like "export >PATH=/usr/local/bin:$PATH" to add it. yes, I have done. /sw/newtools/bin added to PATH; It could be that the xgcc is picking up the >native assembler instead of the cross assembler. You could use -v option with >configure for more verbose information. > P.S: below is my config.status file: (this is from 2.95.2, the same error:) #!/bin/sh # This file was generated automatically by configure. Do not edit. # This directory was configured as follows: ../gcc-2.95.2/configure --with-gcc-version-trigger=/tar-files/gcc-src/gcc-2.95.2/gcc/version.c \ --host=i586-pc-linux-gnu --target=a29k-coff \ --prefix=/sw/newtools --with-gnu-as --with-gnu-ld \ --with-newlib --enable-languages=c,c++ -v --norecursion thanks a lot. regards/james >Brendan Simon. > > > >james wrote: > >> Hi there, >> >> to who may help me, :) >> I'm always getting the same error msg while compiling the GCC software, >> I have tested the 2.8.1 and 2.95.2. >> >> I searched the mailing archives, but did not find anything about the error. >> >> >> >> P.S: >> >> my host is pc-i686-linux-gnu, my target is a29k-coff. >> my configuration is: >> >> ../gcc-2.x.x/configure --target=a29k-coff --with-gnu-as --with-gnu-ld >> >> -c ../gcc-2.8.1/cp/tinfo2.cc >> make[1]: Leaving directory `/tar-files/gcc-src/james-gcc-2.8.1-a29k-coff' >> make[1]: Entering directory `/tar-files/gcc-src/james-gcc-2.8.1-a29k-coff' >> ./xgcc -B./ -O2 -DCROSS_COMPILE -DIN_GCC -g -I./include -g1 >> -DIN_LIBGCC2 - >> D__GCC_FLOAT_NOT_NEEDED -fexceptions -I. -I../gcc-2.8.1 >> -I../gcc-2.8.1/config \ >> -c ../gcc-2.8.1/cp/new.cc >> /tmp/ccpOzwex.s: Assembler messages: >> /tmp/ccpOzwex.s:171: Error: Invalid operands >> /tmp/ccpOzwex.s:224: Error: Invalid operands >> /tmp/ccpOzwex.s:234: Error: Invalid operands >> /tmp/ccpOzwex.s:236: Error: Invalid operands >> /tmp/ccpOzwex.s:273: Error: Invalid operands >> /tmp/ccpOzwex.s:288: Error: Invalid operands >> /tmp/ccpOzwex.s:342: Error: Invalid operands >> /tmp/ccpOzwex.s:395: Error: Invalid operands >> /tmp/ccpOzwex.s:405: Error: Invalid operands >> /tmp/ccpOzwex.s:407: Error: Invalid operands >> /tmp/ccpOzwex.s:444: Error: Invalid operands >> /tmp/ccpOzwex.s:459: Error: Invalid operands >> /tmp/ccpOzwex.s:567: Error: Invalid operands >> /tmp/ccpOzwex.s:577: Error: Invalid operands >> /tmp/ccpOzwex.s:579: Error: Invalid operands >> /tmp/ccpOzwex.s:616: Error: Invalid operands >> /tmp/ccpOzwex.s:631: Error: Invalid operands >> make[1]: *** [new.o] Error 1 >> make[1]: Leaving directory `/tar-files/gcc-src/james-gcc-2.8.1-a29k-coff' >> make: *** [libgcc2.a] Error 1 >> [root@cvsroot james-gcc-2.8.1-a29k-coff > > ------ Want more information? See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/ Want to unsubscribe? Send a note to crossgcc-unsubscribe@sourceware.cygnus.com
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |