This is the mail archive of the newlib@sourceware.org mailing list for the newlib project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Updating top-level autoconf to 2.59


On Thu, Feb 08, 2007 at 05:54:24PM -0500, DJ Delorie wrote:
> 
> > Is this OK?
> 
> This is OK to commit in the morning; to give everyone one last chance
> to complain.  It looks OK to me, but it affects such a large range of
> projects that I'm being extra paranoid.  Newlib added to the cc list,
> too.

Here is what I have checked in.  I had to duplicate a bit of a patch
from Paul in 2005, to work around an autoconf bug (already fixed
upstream): AC_PATH_PROG mangles IFS if the supplied path is empty.
That showed up when I tested in src without GCC.

-- 
Daniel Jacobowitz
CodeSourcery

2007-02-09  Daniel Jacobowitz  <dan@codesourcery.com>

	* Makefile.tpl (build_alias, host_alias, target_alias): Use
	noncanonical equivalents.
	* configure.in: Rename to...
	* configure.ac: ...this.  Update AC_PREREQ.  Prevent error for
	AS_FOR_TARGET.  Set build_noncanonical, host_noncanonical, and
	target_noncanonical.  Use them.  Rewrite removal of configure
	arguments for autoconf 2.59.  Discard variable settings.  Force
	program_transform_name for native tools.

	* Makefile.in: Regenerated.
	* configure: Regenerated with autoconf 2.59.

	* src-release (DEVO_SUPPORT, do-proto-toplev): Expect configure.ac.

2007-02-09  Daniel Jacobowitz  <dan@codesourcery.com>

	* acx.m4 (ACX_CHECK_INSTALLED_TARGET_TOOL): Avoid AC_PATH_PROG
	with an empty path.

Index: configure.ac
===================================================================
--- configure.ac	(revision 121749)
+++ configure.ac	(working copy)
@@ -21,10 +21,27 @@
 sinclude(config/acx.m4)
 
 AC_INIT(move-if-change)
-AC_PREREQ(2.13)
+AC_PREREQ(2.59)
+
+# Find the build, host, and target systems.
+ACX_NONCANONICAL_BUILD
+ACX_NONCANONICAL_HOST
+ACX_NONCANONICAL_TARGET
+
+dnl Autoconf 2.5x and later will set a default program prefix if
+dnl --target was used, even if it was the same as --host.  Disable
+dnl that behavior.  This must be done before AC_CANONICAL_SYSTEM
+dnl to take effect.
+test "$host_noncanonical" = "$target_noncanonical" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_transform_name=s,y,y,
+
 AC_CANONICAL_SYSTEM
 AC_ARG_PROGRAM
 
+m4_pattern_allow([^AS_FOR_TARGET$])dnl
+
 # Get 'install' or 'install-sh' and its variants.
 AC_PROG_INSTALL
 ACX_PROG_LN
@@ -1016,9 +1033,9 @@ if test "${build}" != "${host}" ; then
   # If we are doing a Canadian Cross, in which the host and build systems
   # are not the same, we set reasonable default values for the tools.
 
-  CC=${CC-${host_alias}-gcc}
+  CC=${CC-${host_noncanonical}-gcc}
   CFLAGS=${CFLAGS-"-g -O2"}
-  CXX=${CXX-${host_alias}-c++}
+  CXX=${CXX-${host_noncanonical}-c++}
   CXXFLAGS=${CXXFLAGS-"-g -O2"}
   CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
 
@@ -1584,7 +1601,7 @@ if test x"${with_headers}" != x && test 
     "") x=${prefix} ;;
     *) x=${exec_prefix} ;;
     esac
-    copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
+    copy_dirs="${copy_dirs} ${with_headers} $x/${target_noncanonical}/sys-include"
   fi
 fi
 
@@ -1604,7 +1621,7 @@ if test x"${with_libs}" != x && test x"$
     *) x=${exec_prefix} ;;
     esac
     for l in ${with_libs}; do
-      copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
+      copy_dirs="$l $x/${target_noncanonical}/lib ${copy_dirs}"
     done
   fi
 fi
@@ -1804,7 +1821,7 @@ esac
 
 # Some systems (e.g., one of the i386-aix systems the gas testers are
 # using) don't handle "\$" correctly, so don't use it here.
-tooldir='${exec_prefix}'/${target_alias}
+tooldir='${exec_prefix}'/${target_noncanonical}
 build_tooldir=${tooldir}
 
 # Create a .gdbinit file which runs the one in srcdir
@@ -2068,40 +2085,86 @@ serialization_dependencies=serdep.tmp
 AC_SUBST_FILE(serialization_dependencies)
 
 # Base args.  Strip norecursion, cache-file, srcdir, host, build,
-# target and nonopt.  These are the ones we might not want to pass
-# down to subconfigures.  Also strip program-prefix, program-suffix,
-# and program-transform-name, so that we can pass down a consistent
-# program-transform-name.  If autoconf has put single quotes around
-# any of these arguments (because they contain shell metacharacters)
-# then this will fail; in practice this only happens for
-# --program-transform-name, so be sure to override --program-transform-name
-# at the end of the argument list.
-# These will be expanded by make, so quote '$'.
-cat <<\EOF_SED > conftestsed
-s/ --no[[^ ]]*/ /g
-s/ --c[[a-z-]]*[[= ]][[^ ]]*//g
-s/ --sr[[a-z-]]*[[= ]][[^ ]]*//g
-s/ --ho[[a-z-]]*[[= ]][[^ ]]*//g
-s/ --bu[[a-z-]]*[[= ]][[^ ]]*//g
-s/ --t[[a-z-]]*[[= ]][[^ ]]*//g
-s/ --program-[[pst]][[a-z-]]*[[= ]][[^ ]]*//g
-s/ -cache-file[[= ]][[^ ]]*//g
-s/ -srcdir[[= ]][[^ ]]*//g
-s/ -host[[= ]][[^ ]]*//g
-s/ -build[[= ]][[^ ]]*//g
-s/ -target[[= ]][[^ ]]*//g
-s/ -program-prefix[[= ]][[^ ]]*//g
-s/ -program-suffix[[= ]][[^ ]]*//g
-s/ -program-transform-name[[= ]][[^ ]]*//g
-s/ [[^' -][^ ]*] / /
-s/^ *//;s/ *$//
-s,\$,$$,g
-EOF_SED
-sed -f conftestsed <<EOF_SED > conftestsed.out
- ${ac_configure_args} 
-EOF_SED
-baseargs=`cat conftestsed.out`
-rm -f conftestsed conftestsed.out
+# target, nonopt, and variable assignments.  These are the ones we
+# might not want to pass down to subconfigures.  Also strip
+# program-prefix, program-suffix, and program-transform-name, so that
+# we can pass down a consistent program-transform-name.
+baseargs=
+keep_next=no
+skip_next=no
+eval "set -- $ac_configure_args"
+for ac_arg; do
+  if test X"$skip_next" = X"yes"; then
+    skip_next=no
+    continue
+  fi
+  if test X"$keep_next" = X"yes"; then
+    case $ac_arg in
+      *\'*)
+	ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    baseargs="$baseargs '$ac_arg'"
+    keep_next=no
+    continue
+  fi
+
+  # Handle separated arguments.  Based on the logic generated by
+  # autoconf 2.59.
+  case $ac_arg in
+    *=* | --config-cache | -C | -disable-* | --disable-* \
+      | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+      | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+      | -with-* | --with-* | -without-* | --without-* | --x)
+      separate_arg=no
+      ;;
+    -*)
+      separate_arg=yes
+      ;;
+    *)
+      separate_arg=no
+      ;;
+  esac
+
+  case "$ac_arg" in
+    --no*)
+      continue
+      ;;
+    --c* | \
+    --sr* | \
+    --ho* | \
+    --bu* | \
+    --t* | \
+    --program-* | \
+    -cache_file* | \
+    -srcdir* | \
+    -host* | \
+    -build* | \
+    -target* | \
+    -program-prefix* | \
+    -program-suffix* | \
+    -program-transform-name* )
+      skip_next=$separate_arg
+      continue
+      ;;
+    -*)
+      # An option.  Add it.
+      case $ac_arg in
+	*\'*)
+	  ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+      esac
+      baseargs="$baseargs '$ac_arg'"
+      keep_next=$separate_arg
+      ;;
+    *)
+      # Either a variable assignment, or a nonopt (triplet).  Don't
+      # pass it down; let the Makefile handle this.
+      continue
+      ;;
+  esac
+done
+# Remove the initial space we just introduced and, as these will be
+# expanded by make, quote '$'.
+baseargs=`echo "x$baseargs" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
 
 # Add in --program-transform-name, after --program-prefix and
 # --program-suffix have been applied to it.  Autoconf has already
@@ -2144,7 +2207,7 @@ target_configargs=${baseargs}
 # sorts of decisions they want to make on this basis.  Please consider
 # this option to be deprecated.  FIXME.
 if test x${is_cross_compiler} = xyes ; then
-  target_configargs="--with-cross-host=${host_alias} ${target_configargs}"
+  target_configargs="--with-cross-host=${host_noncanonical} ${target_configargs}"
 fi
 
 # Default to --enable-multilib.
Index: Makefile.tpl
===================================================================
--- Makefile.tpl	(revision 121749)
+++ Makefile.tpl	(working copy)
@@ -28,15 +28,15 @@ in
 # -------------------------------
 VPATH=@srcdir@
 
-build_alias=@build_alias@
+build_alias=@build_noncanonical@
 build_vendor=@build_vendor@
 build_os=@build_os@
 build=@build@
-host_alias=@host_alias@
+host_alias=@host_noncanonical@
 host_vendor=@host_vendor@
 host_os=@host_os@
 host=@host@
-target_alias=@target_alias@
+target_alias=@target_noncanonical@
 target_vendor=@target_vendor@
 target_os=@target_os@
 target=@target@
@@ -1588,7 +1588,7 @@ config.status: configure
 
 # Rebuilding configure.
 AUTOCONF = autoconf
-$(srcdir)/configure: @MAINT@ $(srcdir)/configure.in $(srcdir)/config/acx.m4
+$(srcdir)/configure: @MAINT@ $(srcdir)/configure.ac $(srcdir)/config/acx.m4
 	cd $(srcdir) && $(AUTOCONF)
 
 # ------------------------------
Index: config/acx.m4
===================================================================
--- config/acx.m4	(revision 121749)
+++ config/acx.m4	(working copy)
@@ -300,7 +300,7 @@ if test -z "$ac_cv_path_$1" ; then
     ac_cv_path_$1=[$]$1
   fi
 fi
-if test -z "$ac_cv_path_$1" ; then
+if test -z "$ac_cv_path_$1" && test -n "$gcc_cv_tool_dirs"; then
   AC_PATH_PROG([$1], [$2], [], [$gcc_cv_tool_dirs])
 fi
 if test -z "$ac_cv_path_$1" ; then
Index: src-release
===================================================================
RCS file: /cvs/src/src/src-release,v
retrieving revision 1.21
diff -u -p -r1.21 src-release
--- src-release	31 May 2006 15:14:34 -0000	1.21
+++ src-release	9 Feb 2007 15:03:34 -0000
@@ -46,7 +46,7 @@ PWD = $${PWDCMD-pwd}
 # Files in devo used in any net release.
 # ChangeLog omitted because it may refer to files which are not in this
 # distribution (perhaps it would be better to include it anyway).
-DEVO_SUPPORT= README Makefile.in configure configure.in \
+DEVO_SUPPORT= README Makefile.in configure configure.ac \
 	config.guess config.sub config move-if-change \
 	COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
 	mkinstalldirs ltconfig ltmain.sh missing ylwrap \
@@ -184,9 +184,9 @@ do-proto-toplev: $(DEVO_SUPPORT) $(SUPPO
 	 done)
 	#
 	# Take out texinfo from configurable dirs
-	rm proto-toplev/configure.in
+	rm proto-toplev/configure.ac
 	sed -e '/^host_tools=/s/texinfo //' \
-	    <configure.in >proto-toplev/configure.in
+	    <configure.ac >proto-toplev/configure.ac
 	#
 	mkdir proto-toplev/texinfo
 	ln -s ../../texinfo/texinfo.tex		proto-toplev/texinfo/


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]