This is the mail archive of the
gdb@sourceware.org
mailing list for the GDB project.
restore hangs up
[sorry, I accidentally sent the last message prematurely]
On arm-elf-gdb 6.4 for target rdi, the restore command hangs up. The
`Restoring binary' message is the last thing I see. GDB does not
respond to Ctrl-C. I see that RDI support has been removed from CVS.
So, three questions:
1. Any idea how I can diagnose/work-around this bug in GDB 6.4?
2. Can the restore command display some progress information?
3. With a CVS version of gdb (no RDI), is there a recommended way to
communicate with RDI targets such as the Jeeni JTAG device?
Please cc me in your reply. Thanks,
Shaun
$ arm-elf-gdb
GNU gdb 6.4
...
(gdb) target rdi e=jeeni
JEENI (ADP,ARM7TDI,RST) Rev 2.2
Rebuilt on Jan 12 2001 at 14:22:34
SN=0009J002 ENET=00:80:CF:00:09:E4
IP=192.168.9.2
Connected to ARM RDI target.
(gdb) restore firmware.bin binary 0x2000000
Restoring binary file /srv/tftp/ppimage.bin into memory (0x2000000 to 0x203e434)
[no response]