This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
New ARI warning Wed Oct 2 01:56:22 UTC 2019
- From: GDB Administrator <gdbadmin at sourceware dot org>
- To: gdb-patches at sourceware dot org
- Date: Wed, 2 Oct 2019 01:56:22 +0000
- Subject: New ARI warning Wed Oct 2 01:56:22 UTC 2019
4a5,6
> gdb/ada-lang.c:3881: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/ada-lang.c:3881: printf_filtered (_(" at %p[<no source file available>%p]:%d\n"),
> gdb/ada-lang.c:3885: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/ada-lang.c:3885: (_(" at %ps:%d\n"),
9a12,13
> gdb/ada-valprint.c:241: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/ada-valprint.c:241: fprintf_filtered (stream, _(" %p[<repeats %u times>%p]"),
> gdb/ada-valprint.c:532: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/ada-valprint.c:532: fprintf_filtered (stream, _(" %p[<repeats %u times>%p]"),
34a39,45
> gdb/auto-load.c:494: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/auto-load.c:494: warning (_("File \"%ps\" auto-loading has been declined by your "
> gdb/auto-load.c:994: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/auto-load.c:994:of file %ps."),
> gdb/auto-load.c:1127: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/auto-load.c:1127: warning (_("Couldn't read %s section of %ps"),
> gdb/auto-load.c:1358: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/auto-load.c:1358: printf_filtered (_("Local .gdbinit file \"%ps\" has been loaded.\n"),
> gdb/auto-load.c:1362: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/auto-load.c:1362: printf_filtered (_("Local .gdbinit file \"%ps\" has not been loaded.\n"),
> gdb/auto-load.c:1381: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/auto-load.c:1381:of file %ps.\n\
> gdb/auto-load.c:1405: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/auto-load.c:1405:of file %ps.\n\
35a47,50
> gdb/breakpoint.c:4915: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/breakpoint.c:4915: uiout->message ("\nWatchpoint %pF deleted because the program has "
> gdb/breakpoint.c:6146: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/breakpoint.c:6146: uiout->message (" (%pF evals)",
> gdb/breakpoint.c:6197: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/breakpoint.c:6197: uiout->message ("\tignore next %pF hits\n",
> gdb/breakpoint.c:6661: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/breakpoint.c:6661: current_uiout->message (_("also set at pc %ps.\n"),
37a53,57
> gdb/breakpoint.c:12078: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/breakpoint.c:12078: printf_filtered (" at %ps",
> gdb/breakpoint.c:12090: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/breakpoint.c:12090: printf_filtered (": file %ps, line %d.",
> gdb/breakpoint.c:12397: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/breakpoint.c:12397: uiout->message ("Temporary breakpoint %pF, ",
> gdb/breakpoint.c:12400: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/breakpoint.c:12400: uiout->message ("Breakpoint %pF, ",
> gdb/breakpoint.c:12717: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/breakpoint.c:12717: uiout->message ("\tmarker id is %pF\n",
38a59,65
> gdb/c-typeprint.c:1119: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/c-typeprint.c:1119: _("%p[<incomplete type>%p]\n"),
> gdb/c-typeprint.c:1123: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/c-typeprint.c:1123: _("%p[<no data fields>%p]\n"),
> gdb/c-typeprint.c:1282: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/c-typeprint.c:1282: _("%p[<undefined type>%p] %s;\n"),
> gdb/c-typeprint.c:1629: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/c-typeprint.c:1629: _("%p[<incomplete type>%p]\n"),
> gdb/c-typeprint.c:1633: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/c-typeprint.c:1633: _("%p[<no data fields>%p]\n"),
> gdb/cli/cli-cmds.c:455: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/cli/cli-cmds.c:455: printf_unfiltered (_("Working directory %ps\n (canonically %ps).\n"),
> gdb/cli/cli-cmds.c:460: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/cli/cli-cmds.c:460: printf_unfiltered (_("Working directory %ps.\n"),
51a79
> gdb/cli/cli-logging.c:33: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/cli/cli-logging.c:33: fprintf_filtered (file, _("The current logfile is \"%ps\".\n"),
288a317
> gdb/infrun.c:7661: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/infrun.c:7661: uiout->message ("[Inferior %s (%s) exited with code %pF]\n",
303a333,334
> gdb/linux-thread-db.c:938: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/linux-thread-db.c:938: _("Using host libthread_db library \"%ps\".\n"),
> gdb/linux-thread-db.c:1033: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/linux-thread-db.c:1033: " inferior, but got %ps."),
311a343
> gdb/macrocmd.c:123: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/macrocmd.c:123: fprintf_filtered (stream, "%ps:%d\n",
389a422
> gdb/p-lang.c:296: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/p-lang.c:296: fprintf_filtered (stream, " %p[<repeats %u times>%p]",
407a441,442
> gdb/printcmd.c:2004: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/printcmd.c:2004: fprintf_filtered (gdb_stdout, _("%p[<error: %s>%p]\n"),
> gdb/printcmd.c:2219: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/printcmd.c:2219: fprintf_filtered (stream, "%s%ps = ", n_spaces (2 * indent),
476a512
> gdb/rust-lang.c:477: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/rust-lang.c:477: fprintf_filtered (stream, _("%s {%p[<No data fields>%p]}"),
499a536
> gdb/stack.c:1528: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/stack.c:1528: (" (%ps:%d)",
507a545,547
> gdb/symfile.c:1109: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/symfile.c:1109: printf_filtered (_("Reading symbols from %ps...\n"),
> gdb/symfile.c:1122: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/symfile.c:1122: printf_filtered (_("Expanding full symbols from %ps...\n"),
> gdb/symfile.c:1135: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/symfile.c:1135: printf_filtered (_("(No debugging symbols found in %ps)\n"),
515a556,557
> gdb/symtab.c:4751: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/symtab.c:4751: printf_filtered (_("\nFile %ps:\n"),
> gdb/symtab.c:4820: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/symtab.c:4820: printf_filtered (_("%ps %ps\n"),
575a618
> gdb/ui-out.c:644: code: long long: Do not use 'long long', instead use LONGEST
gdb/ui-out.c:644: call_do_message (style, current_substring, va_arg (args, long long));
576a620,624
> gdb/unittests/format_pieces-selftests.c:67: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/unittests/format_pieces-selftests.c:67: check ("Hello\\t \"%p[%pF%ps%*.*d%p]\"",
> gdb/unittests/format_pieces-selftests.c:70: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/unittests/format_pieces-selftests.c:70: format_piece ("%p[", ptr_arg, 0),
> gdb/unittests/format_pieces-selftests.c:71: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/unittests/format_pieces-selftests.c:71: format_piece ("%pF", ptr_arg, 0),
> gdb/unittests/format_pieces-selftests.c:72: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/unittests/format_pieces-selftests.c:72: format_piece ("%ps", ptr_arg, 0),
> gdb/unittests/format_pieces-selftests.c:74: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/unittests/format_pieces-selftests.c:74: format_piece ("%p]", ptr_arg, 0),
612a661
> gdb/valprint.c:2077: code: %p: Do not use printf(%p), instead use printf(%s,paddr()) to dump a target address, or host_address_to_string() for a host address
gdb/valprint.c:2077: fprintf_filtered (stream, " %p[<repeats %u times>%p]",