This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[PATCH v4 03/11] Add configure check for std::thread
- From: Tom Tromey <tom at tromey dot com>
- To: gdb-patches at sourceware dot org
- Cc: Tom Tromey <tom at tromey dot com>
- Date: Tue, 1 Oct 2019 14:12:19 -0600
- Subject: [PATCH v4 03/11] Add configure check for std::thread
- References: <20191001201227.8519-1-tom@tromey.com>
This adds a configure check for std::thread. This is needed because
std::thread is not available on some systems, like some versions of
mingw and DJGPP.
This also adds configury to make sure that a threaded gdb links
against the correct threading library (-lpthread or the like), and
passes the right flags (e.g., -pthread) to the compilations.
gdb/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* acinclude.m4: Include ax_pthread.m4.
* Makefile.in (PTHREAD_CFLAGS, PTHREAD_LIBS): New variables.
(INTERNAL_CFLAGS_BASE): Use PTHREAD_CFLAGS.
(CLIBS): Use PTHREAD_LIBS.
(aclocal_m4_deps): Add ax_pthread.m4.
* config.in, configure: Rebuild.
* gdbsupport/common.m4 (GDB_AC_COMMON): Check for std::thread.
gdb/gdbserver/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* acinclude.m4: Include ax_pthread.m4.
* config.in, configure: Rebuild.
---
gdb/ChangeLog | 10 +
gdb/Makefile.in | 12 +-
gdb/acinclude.m4 | 2 +
gdb/config.in | 3 +
gdb/configure | 767 +++++++++++++++++++++++++++++++++++++
gdb/gdbserver/ChangeLog | 5 +
gdb/gdbserver/acinclude.m4 | 2 +
gdb/gdbserver/config.in | 3 +
gdb/gdbserver/configure | 767 +++++++++++++++++++++++++++++++++++++
gdb/gdbsupport/common.m4 | 26 ++
10 files changed, 1593 insertions(+), 4 deletions(-)
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index d6282636752..c4c858b5594 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -203,6 +203,9 @@ WERROR_CFLAGS = @WERROR_CFLAGS@
GDB_WARN_CFLAGS = $(WARN_CFLAGS)
GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
+PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
+PTHREAD_LIBS = @PTHREAD_LIBS@
+
RDYNAMIC = @RDYNAMIC@
# Where is the INTL library? Typically in ../intl.
@@ -569,7 +572,7 @@ INTERNAL_CFLAGS_BASE = \
$(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) $(ZLIBINC) \
$(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
$(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS) \
- $(SRCHIGH_CFLAGS)
+ $(SRCHIGH_CFLAGS) $(PTHREAD_CFLAGS)
INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
@@ -583,7 +586,7 @@ LDFLAGS = @LDFLAGS@
# PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
INTERNAL_LDFLAGS = \
$(CXXFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) \
- $(LDFLAGS) $(CONFIG_LDFLAGS)
+ $(LDFLAGS) $(CONFIG_LDFLAGS) $(PTHREAD_CFLAGS)
# Libraries and corresponding dependencies for compiling gdb.
# XM_CLIBS, defined in *config files, have host-dependent libs.
@@ -593,7 +596,7 @@ CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(ZLIB) $(INTL) $(LIBIBERTY) $(LIBD
@LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
$(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) $(LIBIPT) \
$(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBICONV) $(LIBMPFR) \
- $(SRCHIGH_LIBS)
+ $(SRCHIGH_LIBS) $(PTHREAD_LIBS)
CDEPS = $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
$(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
@@ -2054,7 +2057,8 @@ aclocal_m4_deps = \
../config/depstand.m4 \
../config/lcmessage.m4 \
../config/codeset.m4 \
- ../config/zlib.m4
+ ../config/zlib.m4 \
+ ../config/ax_pthread.m4
$(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
diff --git a/gdb/acinclude.m4 b/gdb/acinclude.m4
index 5f1358b8207..8592b6c875b 100644
--- a/gdb/acinclude.m4
+++ b/gdb/acinclude.m4
@@ -73,6 +73,8 @@ m4_include(ptrace.m4)
m4_include(ax_cxx_compile_stdcxx.m4)
+m4_include([../config/ax_pthread.m4])
+
## ----------------------------------------- ##
## ANSIfy the C compiler whenever possible. ##
## From Franc,ois Pinard ##
diff --git a/gdb/config.in b/gdb/config.in
index 26ca02f6a3e..2f17cb3f8a4 100644
--- a/gdb/config.in
+++ b/gdb/config.in
@@ -17,6 +17,9 @@
*/
#undef CRAY_STACKSEG_END
+/* Define to 1 if std::thread works. */
+#undef CXX_STD_THREAD
+
/* Define to 1 if using `alloca.c'. */
#undef C_ALLOCA
diff --git a/gdb/configure b/gdb/configure
index 22a5f6051d4..263f301d8ee 100755
--- a/gdb/configure
+++ b/gdb/configure
@@ -697,6 +697,11 @@ SYSTEM_GDBINIT
TARGET_SYSTEM_ROOT
CONFIG_LDFLAGS
RDYNAMIC
+PTHREAD_CFLAGS
+PTHREAD_LIBS
+PTHREAD_CC
+ax_pthread_config
+SED
ALLOCA
LTLIBIPT
LIBIPT
@@ -13180,6 +13185,75 @@ _ACEOF
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+ { ac_script=; unset ac_script;}
+ if test -z "$SED"; then
+ ac_path_SED_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_SED_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
+else
+ ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
$as_echo_n "checking for ANSI C header files... " >&6; }
@@ -13564,6 +13638,699 @@ cat >>confdefs.h <<_ACEOF
_ACEOF
+ # Check for std::thread. This does not work on some platforms, like
+ # mingw and DJGPP.
+ ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ax_pthread_ok=no
+
+# We used to check for pthread.h first, but this fails if pthread.h
+# requires special compiler flags (e.g. on Tru64 or Sequent).
+# It gets checked for in the link test anyway.
+
+# First of all, check if the user has set any of the PTHREAD_LIBS,
+# etcetera environment variables, and if threads linking works using
+# them:
+if test "x$PTHREAD_CFLAGS$PTHREAD_LIBS" != "x"; then
+ ax_pthread_save_CC="$CC"
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ if test "x$PTHREAD_CC" != "x"; then :
+ CC="$PTHREAD_CC"
+fi
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS" >&5
+$as_echo_n "checking for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char pthread_join ();
+int
+main ()
+{
+return pthread_join ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ax_pthread_ok=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_ok" >&5
+$as_echo "$ax_pthread_ok" >&6; }
+ if test "x$ax_pthread_ok" = "xno"; then
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+ fi
+ CC="$ax_pthread_save_CC"
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
+fi
+
+# We must check for the threads library under a number of different
+# names; the ordering is very important because some systems
+# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
+# libraries is broken (non-POSIX).
+
+# Create a list of thread flags to try. Items starting with a "-" are
+# C compiler flags, and other items are library names, except for "none"
+# which indicates that we try without any flags at all, and "pthread-config"
+# which is a program returning the flags for the Pth emulation library.
+
+ax_pthread_flags="pthreads none -Kthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+
+# The ordering *is* (sometimes) important. Some notes on the
+# individual items follow:
+
+# pthreads: AIX (must check this before -lpthread)
+# none: in case threads are in libc; should be tried before -Kthread and
+# other compiler flags to prevent continual compiler warnings
+# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads), Tru64
+# (Note: HP C rejects this with "bad form for `-t' option")
+# -pthreads: Solaris/gcc (Note: HP C also rejects)
+# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+# doesn't hurt to check since this sometimes defines pthreads and
+# -D_REENTRANT too), HP C (must be checked before -lpthread, which
+# is present but should not be used directly; and before -mthreads,
+# because the compiler interprets this as "-mt" + "-hreads")
+# -mthreads: Mingw32/gcc, Lynx/gcc
+# pthread: Linux, etcetera
+# --thread-safe: KAI C++
+# pthread-config: use pthread-config program (for GNU Pth library)
+
+case $host_os in
+
+ freebsd*)
+
+ # -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
+ # lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
+
+ ax_pthread_flags="-kthread lthread $ax_pthread_flags"
+ ;;
+
+ hpux*)
+
+ # From the cc(1) man page: "[-mt] Sets various -D flags to enable
+ # multi-threading and also sets -lpthread."
+
+ ax_pthread_flags="-mt -pthread pthread $ax_pthread_flags"
+ ;;
+
+ openedition*)
+
+ # IBM z/OS requires a feature-test macro to be defined in order to
+ # enable POSIX threads at all, so give the user a hint if this is
+ # not set. (We don't define these ourselves, as they can affect
+ # other portions of the system API in unpredictable ways.)
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+# if !defined(_OPEN_THREADS) && !defined(_UNIX03_THREADS)
+ AX_PTHREAD_ZOS_MISSING
+# endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "AX_PTHREAD_ZOS_MISSING" >/dev/null 2>&1; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&5
+$as_echo "$as_me: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&2;}
+fi
+rm -f conftest*
+
+ ;;
+
+ solaris*)
+
+ # On Solaris (at least, for some versions), libc contains stubbed
+ # (non-functional) versions of the pthreads routines, so link-based
+ # tests will erroneously succeed. (N.B.: The stubs are missing
+ # pthread_cleanup_push, or rather a function called by this macro,
+ # so we could check for that, but who knows whether they'll stub
+ # that too in a future libc.) So we'll check first for the
+ # standard Solaris way of linking pthreads (-mt -lpthread).
+
+ ax_pthread_flags="-mt,pthread pthread $ax_pthread_flags"
+ ;;
+esac
+
+# GCC generally uses -pthread, or -pthreads on some platforms (e.g. SPARC)
+
+if test "x$GCC" = "xyes"; then :
+ ax_pthread_flags="-pthread -pthreads $ax_pthread_flags"
+fi
+
+# The presence of a feature test macro requesting re-entrant function
+# definitions is, on some systems, a strong hint that pthreads support is
+# correctly enabled
+
+case $host_os in
+ darwin* | hpux* | linux* | osf* | solaris*)
+ ax_pthread_check_macro="_REENTRANT"
+ ;;
+
+ aix*)
+ ax_pthread_check_macro="_THREAD_SAFE"
+ ;;
+
+ *)
+ ax_pthread_check_macro="--"
+ ;;
+esac
+if test "x$ax_pthread_check_macro" = "x--"; then :
+ ax_pthread_check_cond=0
+else
+ ax_pthread_check_cond="!defined($ax_pthread_check_macro)"
+fi
+
+# Are we compiling with Clang?
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC is Clang" >&5
+$as_echo_n "checking whether $CC is Clang... " >&6; }
+if ${ax_cv_PTHREAD_CLANG+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ax_cv_PTHREAD_CLANG=no
+ # Note that Autoconf sets GCC=yes for Clang as well as GCC
+ if test "x$GCC" = "xyes"; then
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Note: Clang 2.7 lacks __clang_[a-z]+__ */
+# if defined(__clang__) && defined(__llvm__)
+ AX_PTHREAD_CC_IS_CLANG
+# endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "AX_PTHREAD_CC_IS_CLANG" >/dev/null 2>&1; then :
+ ax_cv_PTHREAD_CLANG=yes
+fi
+rm -f conftest*
+
+ fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG" >&5
+$as_echo "$ax_cv_PTHREAD_CLANG" >&6; }
+ax_pthread_clang="$ax_cv_PTHREAD_CLANG"
+
+ax_pthread_clang_warning=no
+
+# Clang needs special handling, because older versions handle the -pthread
+# option in a rather... idiosyncratic way
+
+if test "x$ax_pthread_clang" = "xyes"; then
+
+ # Clang takes -pthread; it has never supported any other flag
+
+ # (Note 1: This will need to be revisited if a system that Clang
+ # supports has POSIX threads in a separate library. This tends not
+ # to be the way of modern systems, but it's conceivable.)
+
+ # (Note 2: On some systems, notably Darwin, -pthread is not needed
+ # to get POSIX threads support; the API is always present and
+ # active. We could reasonably leave PTHREAD_CFLAGS empty. But
+ # -pthread does define _REENTRANT, and while the Darwin headers
+ # ignore this macro, third-party headers might not.)
+
+ PTHREAD_CFLAGS="-pthread"
+ PTHREAD_LIBS=
+
+ ax_pthread_ok=yes
+
+ # However, older versions of Clang make a point of warning the user
+ # that, in an invocation where only linking and no compilation is
+ # taking place, the -pthread option has no effect ("argument unused
+ # during compilation"). They expect -pthread to be passed in only
+ # when source code is being compiled.
+ #
+ # Problem is, this is at odds with the way Automake and most other
+ # C build frameworks function, which is that the same flags used in
+ # compilation (CFLAGS) are also used in linking. Many systems
+ # supported by AX_PTHREAD require exactly this for POSIX threads
+ # support, and in fact it is often not straightforward to specify a
+ # flag that is used only in the compilation phase and not in
+ # linking. Such a scenario is extremely rare in practice.
+ #
+ # Even though use of the -pthread flag in linking would only print
+ # a warning, this can be a nuisance for well-run software projects
+ # that build with -Werror. So if the active version of Clang has
+ # this misfeature, we search for an option to squash it.
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether Clang needs flag to prevent \"argument unused\" warning when linking with -pthread" >&5
+$as_echo_n "checking whether Clang needs flag to prevent \"argument unused\" warning when linking with -pthread... " >&6; }
+if ${ax_cv_PTHREAD_CLANG_NO_WARN_FLAG+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ax_cv_PTHREAD_CLANG_NO_WARN_FLAG=unknown
+ # Create an alternate version of $ac_link that compiles and
+ # links in two steps (.c -> .o, .o -> exe) instead of one
+ # (.c -> exe), because the warning occurs only in the second
+ # step
+ ax_pthread_save_ac_link="$ac_link"
+ ax_pthread_sed='s/conftest\.\$ac_ext/conftest.$ac_objext/g'
+ ax_pthread_link_step=`$as_echo "$ac_link" | sed "$ax_pthread_sed"`
+ ax_pthread_2step_ac_link="($ac_compile) && (echo ==== >&5) && ($ax_pthread_link_step)"
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ for ax_pthread_try in '' -Qunused-arguments -Wno-unused-command-line-argument unknown; do
+ if test "x$ax_pthread_try" = "xunknown"; then :
+ break
+fi
+ CFLAGS="-Werror -Wunknown-warning-option $ax_pthread_try -pthread $ax_pthread_save_CFLAGS"
+ ac_link="$ax_pthread_save_ac_link"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int main(void){return 0;}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_link="$ax_pthread_2step_ac_link"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int main(void){return 0;}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ break
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+ ac_link="$ax_pthread_save_ac_link"
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ if test "x$ax_pthread_try" = "x"; then :
+ ax_pthread_try=no
+fi
+ ax_cv_PTHREAD_CLANG_NO_WARN_FLAG="$ax_pthread_try"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&5
+$as_echo "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&6; }
+
+ case "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" in
+ no | unknown) ;;
+ *) PTHREAD_CFLAGS="$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG $PTHREAD_CFLAGS" ;;
+ esac
+
+fi # $ax_pthread_clang = yes
+
+if test "x$ax_pthread_ok" = "xno"; then
+for ax_pthread_try_flag in $ax_pthread_flags; do
+
+ case $ax_pthread_try_flag in
+ none)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work without any flags" >&5
+$as_echo_n "checking whether pthreads work without any flags... " >&6; }
+ ;;
+
+ -mt,pthread)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with -mt -lpthread" >&5
+$as_echo_n "checking whether pthreads work with -mt -lpthread... " >&6; }
+ PTHREAD_CFLAGS="-mt"
+ PTHREAD_LIBS="-lpthread"
+ ;;
+
+ -*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with $ax_pthread_try_flag" >&5
+$as_echo_n "checking whether pthreads work with $ax_pthread_try_flag... " >&6; }
+ PTHREAD_CFLAGS="$ax_pthread_try_flag"
+ ;;
+
+ pthread-config)
+ # Extract the first word of "pthread-config", so it can be a program name with args.
+set dummy pthread-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ax_pthread_config+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ax_pthread_config"; then
+ ac_cv_prog_ax_pthread_config="$ax_pthread_config" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ax_pthread_config="yes"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ test -z "$ac_cv_prog_ax_pthread_config" && ac_cv_prog_ax_pthread_config="no"
+fi
+fi
+ax_pthread_config=$ac_cv_prog_ax_pthread_config
+if test -n "$ax_pthread_config"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_config" >&5
+$as_echo "$ax_pthread_config" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test "x$ax_pthread_config" = "xno"; then :
+ continue
+fi
+ PTHREAD_CFLAGS="`pthread-config --cflags`"
+ PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
+ ;;
+
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for the pthreads library -l$ax_pthread_try_flag" >&5
+$as_echo_n "checking for the pthreads library -l$ax_pthread_try_flag... " >&6; }
+ PTHREAD_LIBS="-l$ax_pthread_try_flag"
+ ;;
+ esac
+
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+
+ # Check for various functions. We must include pthread.h,
+ # since some functions may be macros. (On the Sequent, we
+ # need a special flag -Kthread to make this header compile.)
+ # We check for pthread_join because it is in -lpthread on IRIX
+ # while pthread_create is in libc. We check for pthread_attr_init
+ # due to DEC craziness with -lpthreads. We check for
+ # pthread_cleanup_push because it is one of the few pthread
+ # functions on Solaris that doesn't have a non-functional libc stub.
+ # We try pthread_create on general principles.
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <pthread.h>
+# if $ax_pthread_check_cond
+# error "$ax_pthread_check_macro must be defined"
+# endif
+ static void routine(void *a) { a = 0; }
+ static void *start_routine(void *a) { return a; }
+int
+main ()
+{
+pthread_t th; pthread_attr_t attr;
+ pthread_create(&th, 0, start_routine, 0);
+ pthread_join(th, 0);
+ pthread_attr_init(&attr);
+ pthread_cleanup_push(routine, 0);
+ pthread_cleanup_pop(0) /* ; */
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ax_pthread_ok=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_ok" >&5
+$as_echo "$ax_pthread_ok" >&6; }
+ if test "x$ax_pthread_ok" = "xyes"; then :
+ break
+fi
+
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+done
+fi
+
+# Various other checks:
+if test "x$ax_pthread_ok" = "xyes"; then
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+
+ # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for joinable pthread attribute" >&5
+$as_echo_n "checking for joinable pthread attribute... " >&6; }
+if ${ax_cv_PTHREAD_JOINABLE_ATTR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ax_cv_PTHREAD_JOINABLE_ATTR=unknown
+ for ax_pthread_attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <pthread.h>
+int
+main ()
+{
+int attr = $ax_pthread_attr; return attr /* ; */
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ax_cv_PTHREAD_JOINABLE_ATTR=$ax_pthread_attr; break
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_JOINABLE_ATTR" >&5
+$as_echo "$ax_cv_PTHREAD_JOINABLE_ATTR" >&6; }
+ if test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xunknown" && \
+ test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xPTHREAD_CREATE_JOINABLE" && \
+ test "x$ax_pthread_joinable_attr_defined" != "xyes"; then :
+
+cat >>confdefs.h <<_ACEOF
+#define PTHREAD_CREATE_JOINABLE $ax_cv_PTHREAD_JOINABLE_ATTR
+_ACEOF
+
+ ax_pthread_joinable_attr_defined=yes
+
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether more special flags are required for pthreads" >&5
+$as_echo_n "checking whether more special flags are required for pthreads... " >&6; }
+if ${ax_cv_PTHREAD_SPECIAL_FLAGS+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ax_cv_PTHREAD_SPECIAL_FLAGS=no
+ case $host_os in
+ solaris*)
+ ax_cv_PTHREAD_SPECIAL_FLAGS="-D_POSIX_PTHREAD_SEMANTICS"
+ ;;
+ esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_SPECIAL_FLAGS" >&5
+$as_echo "$ax_cv_PTHREAD_SPECIAL_FLAGS" >&6; }
+ if test "x$ax_cv_PTHREAD_SPECIAL_FLAGS" != "xno" && \
+ test "x$ax_pthread_special_flags_added" != "xyes"; then :
+ PTHREAD_CFLAGS="$ax_cv_PTHREAD_SPECIAL_FLAGS $PTHREAD_CFLAGS"
+ ax_pthread_special_flags_added=yes
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PTHREAD_PRIO_INHERIT" >&5
+$as_echo_n "checking for PTHREAD_PRIO_INHERIT... " >&6; }
+if ${ax_cv_PTHREAD_PRIO_INHERIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <pthread.h>
+int
+main ()
+{
+int i = PTHREAD_PRIO_INHERIT;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ax_cv_PTHREAD_PRIO_INHERIT=yes
+else
+ ax_cv_PTHREAD_PRIO_INHERIT=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_PRIO_INHERIT" >&5
+$as_echo "$ax_cv_PTHREAD_PRIO_INHERIT" >&6; }
+ if test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes" && \
+ test "x$ax_pthread_prio_inherit_defined" != "xyes"; then :
+
+$as_echo "#define HAVE_PTHREAD_PRIO_INHERIT 1" >>confdefs.h
+
+ ax_pthread_prio_inherit_defined=yes
+
+fi
+
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
+
+ # More AIX lossage: compile with *_r variant
+ if test "x$GCC" != "xyes"; then
+ case $host_os in
+ aix*)
+ case "x/$CC" in #(
+ x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6) :
+ #handle absolute path differently from PATH based program lookup
+ case "x$CC" in #(
+ x/*) :
+ if as_fn_executable_p ${CC}_r; then :
+ PTHREAD_CC="${CC}_r"
+fi ;; #(
+ *) :
+ for ac_prog in ${CC}_r
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_PTHREAD_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$PTHREAD_CC"; then
+ ac_cv_prog_PTHREAD_CC="$PTHREAD_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_PTHREAD_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+PTHREAD_CC=$ac_cv_prog_PTHREAD_CC
+if test -n "$PTHREAD_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PTHREAD_CC" >&5
+$as_echo "$PTHREAD_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$PTHREAD_CC" && break
+done
+test -n "$PTHREAD_CC" || PTHREAD_CC="$CC"
+ ;;
+esac ;; #(
+ *) :
+ ;;
+esac
+ ;;
+ esac
+ fi
+fi
+
+test -n "$PTHREAD_CC" || PTHREAD_CC="$CC"
+
+
+
+
+
+# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
+if test "x$ax_pthread_ok" = "xyes"; then
+ threads=yes
+ :
+else
+ ax_pthread_ok=no
+ threads=no
+fi
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+ if test "$threads" = "yes"; then
+ save_LIBS="$LIBS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ save_CXXFLAGS="$CXXFLAGS"
+ CXXFLAGS="$PTHREAD_CFLAGS $save_CFLAGS"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for std::thread" >&5
+$as_echo_n "checking for std::thread... " >&6; }
+if ${gdb_cv_cxx_std_thread+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <thread>
+ void callback() { }
+int
+main ()
+{
+std::thread t(callback);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ gdb_cv_cxx_std_thread=yes
+else
+ gdb_cv_cxx_std_thread=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gdb_cv_cxx_std_thread" >&5
+$as_echo "$gdb_cv_cxx_std_thread" >&6; }
+ LIBS="$save_LIBS"
+ CXXFLAGS="$save_CXXFLAGS"
+ fi
+ if test $gdb_cv_cxx_std_thread = yes; then
+
+$as_echo "#define CXX_STD_THREAD 1" >>confdefs.h
+
+ fi
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sigsetjmp" >&5
$as_echo_n "checking for sigsetjmp... " >&6; }
if ${gdb_cv_func_sigsetjmp+:} false; then :
diff --git a/gdb/gdbserver/acinclude.m4 b/gdb/gdbserver/acinclude.m4
index 880c03ac1db..4c18e9b01db 100644
--- a/gdb/gdbserver/acinclude.m4
+++ b/gdb/gdbserver/acinclude.m4
@@ -31,6 +31,8 @@ m4_include(../ax_cxx_compile_stdcxx.m4)
dnl For GDB_AC_SELFTEST.
m4_include(../selftest.m4)
+m4_include([../../config/ax_pthread.m4])
+
dnl Check for existence of a type $1 in libthread_db.h
dnl Based on BFD_HAVE_SYS_PROCFS_TYPE in bfd/bfd.m4.
diff --git a/gdb/gdbserver/config.in b/gdb/gdbserver/config.in
index f05e9be48ad..fb612723613 100644
--- a/gdb/gdbserver/config.in
+++ b/gdb/gdbserver/config.in
@@ -5,6 +5,9 @@
*/
#undef CRAY_STACKSEG_END
+/* Define to 1 if std::thread works. */
+#undef CXX_STD_THREAD
+
/* Define to 1 if using `alloca.c'. */
#undef C_ALLOCA
diff --git a/gdb/gdbserver/configure b/gdb/gdbserver/configure
index 692cb0f3082..aa13ce6aa4b 100755
--- a/gdb/gdbserver/configure
+++ b/gdb/gdbserver/configure
@@ -636,6 +636,11 @@ WERROR_CFLAGS
WARN_CFLAGS
ustinc
ustlibs
+PTHREAD_CFLAGS
+PTHREAD_LIBS
+PTHREAD_CC
+ax_pthread_config
+SED
ALLOCA
CCDEPMODE
CONFIG_SRC_SUBDIR
@@ -6472,6 +6477,75 @@ _ACEOF
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+ { ac_script=; unset ac_script;}
+ if test -z "$SED"; then
+ ac_path_SED_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_SED_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
+else
+ ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
$as_echo_n "checking for ANSI C header files... " >&6; }
@@ -6856,6 +6930,699 @@ cat >>confdefs.h <<_ACEOF
_ACEOF
+ # Check for std::thread. This does not work on some platforms, like
+ # mingw and DJGPP.
+ ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ax_pthread_ok=no
+
+# We used to check for pthread.h first, but this fails if pthread.h
+# requires special compiler flags (e.g. on Tru64 or Sequent).
+# It gets checked for in the link test anyway.
+
+# First of all, check if the user has set any of the PTHREAD_LIBS,
+# etcetera environment variables, and if threads linking works using
+# them:
+if test "x$PTHREAD_CFLAGS$PTHREAD_LIBS" != "x"; then
+ ax_pthread_save_CC="$CC"
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ if test "x$PTHREAD_CC" != "x"; then :
+ CC="$PTHREAD_CC"
+fi
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS" >&5
+$as_echo_n "checking for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char pthread_join ();
+int
+main ()
+{
+return pthread_join ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ax_pthread_ok=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_ok" >&5
+$as_echo "$ax_pthread_ok" >&6; }
+ if test "x$ax_pthread_ok" = "xno"; then
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+ fi
+ CC="$ax_pthread_save_CC"
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
+fi
+
+# We must check for the threads library under a number of different
+# names; the ordering is very important because some systems
+# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
+# libraries is broken (non-POSIX).
+
+# Create a list of thread flags to try. Items starting with a "-" are
+# C compiler flags, and other items are library names, except for "none"
+# which indicates that we try without any flags at all, and "pthread-config"
+# which is a program returning the flags for the Pth emulation library.
+
+ax_pthread_flags="pthreads none -Kthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+
+# The ordering *is* (sometimes) important. Some notes on the
+# individual items follow:
+
+# pthreads: AIX (must check this before -lpthread)
+# none: in case threads are in libc; should be tried before -Kthread and
+# other compiler flags to prevent continual compiler warnings
+# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads), Tru64
+# (Note: HP C rejects this with "bad form for `-t' option")
+# -pthreads: Solaris/gcc (Note: HP C also rejects)
+# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+# doesn't hurt to check since this sometimes defines pthreads and
+# -D_REENTRANT too), HP C (must be checked before -lpthread, which
+# is present but should not be used directly; and before -mthreads,
+# because the compiler interprets this as "-mt" + "-hreads")
+# -mthreads: Mingw32/gcc, Lynx/gcc
+# pthread: Linux, etcetera
+# --thread-safe: KAI C++
+# pthread-config: use pthread-config program (for GNU Pth library)
+
+case $host_os in
+
+ freebsd*)
+
+ # -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
+ # lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
+
+ ax_pthread_flags="-kthread lthread $ax_pthread_flags"
+ ;;
+
+ hpux*)
+
+ # From the cc(1) man page: "[-mt] Sets various -D flags to enable
+ # multi-threading and also sets -lpthread."
+
+ ax_pthread_flags="-mt -pthread pthread $ax_pthread_flags"
+ ;;
+
+ openedition*)
+
+ # IBM z/OS requires a feature-test macro to be defined in order to
+ # enable POSIX threads at all, so give the user a hint if this is
+ # not set. (We don't define these ourselves, as they can affect
+ # other portions of the system API in unpredictable ways.)
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+# if !defined(_OPEN_THREADS) && !defined(_UNIX03_THREADS)
+ AX_PTHREAD_ZOS_MISSING
+# endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "AX_PTHREAD_ZOS_MISSING" >/dev/null 2>&1; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&5
+$as_echo "$as_me: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&2;}
+fi
+rm -f conftest*
+
+ ;;
+
+ solaris*)
+
+ # On Solaris (at least, for some versions), libc contains stubbed
+ # (non-functional) versions of the pthreads routines, so link-based
+ # tests will erroneously succeed. (N.B.: The stubs are missing
+ # pthread_cleanup_push, or rather a function called by this macro,
+ # so we could check for that, but who knows whether they'll stub
+ # that too in a future libc.) So we'll check first for the
+ # standard Solaris way of linking pthreads (-mt -lpthread).
+
+ ax_pthread_flags="-mt,pthread pthread $ax_pthread_flags"
+ ;;
+esac
+
+# GCC generally uses -pthread, or -pthreads on some platforms (e.g. SPARC)
+
+if test "x$GCC" = "xyes"; then :
+ ax_pthread_flags="-pthread -pthreads $ax_pthread_flags"
+fi
+
+# The presence of a feature test macro requesting re-entrant function
+# definitions is, on some systems, a strong hint that pthreads support is
+# correctly enabled
+
+case $host_os in
+ darwin* | hpux* | linux* | osf* | solaris*)
+ ax_pthread_check_macro="_REENTRANT"
+ ;;
+
+ aix*)
+ ax_pthread_check_macro="_THREAD_SAFE"
+ ;;
+
+ *)
+ ax_pthread_check_macro="--"
+ ;;
+esac
+if test "x$ax_pthread_check_macro" = "x--"; then :
+ ax_pthread_check_cond=0
+else
+ ax_pthread_check_cond="!defined($ax_pthread_check_macro)"
+fi
+
+# Are we compiling with Clang?
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC is Clang" >&5
+$as_echo_n "checking whether $CC is Clang... " >&6; }
+if ${ax_cv_PTHREAD_CLANG+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ax_cv_PTHREAD_CLANG=no
+ # Note that Autoconf sets GCC=yes for Clang as well as GCC
+ if test "x$GCC" = "xyes"; then
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Note: Clang 2.7 lacks __clang_[a-z]+__ */
+# if defined(__clang__) && defined(__llvm__)
+ AX_PTHREAD_CC_IS_CLANG
+# endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "AX_PTHREAD_CC_IS_CLANG" >/dev/null 2>&1; then :
+ ax_cv_PTHREAD_CLANG=yes
+fi
+rm -f conftest*
+
+ fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG" >&5
+$as_echo "$ax_cv_PTHREAD_CLANG" >&6; }
+ax_pthread_clang="$ax_cv_PTHREAD_CLANG"
+
+ax_pthread_clang_warning=no
+
+# Clang needs special handling, because older versions handle the -pthread
+# option in a rather... idiosyncratic way
+
+if test "x$ax_pthread_clang" = "xyes"; then
+
+ # Clang takes -pthread; it has never supported any other flag
+
+ # (Note 1: This will need to be revisited if a system that Clang
+ # supports has POSIX threads in a separate library. This tends not
+ # to be the way of modern systems, but it's conceivable.)
+
+ # (Note 2: On some systems, notably Darwin, -pthread is not needed
+ # to get POSIX threads support; the API is always present and
+ # active. We could reasonably leave PTHREAD_CFLAGS empty. But
+ # -pthread does define _REENTRANT, and while the Darwin headers
+ # ignore this macro, third-party headers might not.)
+
+ PTHREAD_CFLAGS="-pthread"
+ PTHREAD_LIBS=
+
+ ax_pthread_ok=yes
+
+ # However, older versions of Clang make a point of warning the user
+ # that, in an invocation where only linking and no compilation is
+ # taking place, the -pthread option has no effect ("argument unused
+ # during compilation"). They expect -pthread to be passed in only
+ # when source code is being compiled.
+ #
+ # Problem is, this is at odds with the way Automake and most other
+ # C build frameworks function, which is that the same flags used in
+ # compilation (CFLAGS) are also used in linking. Many systems
+ # supported by AX_PTHREAD require exactly this for POSIX threads
+ # support, and in fact it is often not straightforward to specify a
+ # flag that is used only in the compilation phase and not in
+ # linking. Such a scenario is extremely rare in practice.
+ #
+ # Even though use of the -pthread flag in linking would only print
+ # a warning, this can be a nuisance for well-run software projects
+ # that build with -Werror. So if the active version of Clang has
+ # this misfeature, we search for an option to squash it.
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether Clang needs flag to prevent \"argument unused\" warning when linking with -pthread" >&5
+$as_echo_n "checking whether Clang needs flag to prevent \"argument unused\" warning when linking with -pthread... " >&6; }
+if ${ax_cv_PTHREAD_CLANG_NO_WARN_FLAG+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ax_cv_PTHREAD_CLANG_NO_WARN_FLAG=unknown
+ # Create an alternate version of $ac_link that compiles and
+ # links in two steps (.c -> .o, .o -> exe) instead of one
+ # (.c -> exe), because the warning occurs only in the second
+ # step
+ ax_pthread_save_ac_link="$ac_link"
+ ax_pthread_sed='s/conftest\.\$ac_ext/conftest.$ac_objext/g'
+ ax_pthread_link_step=`$as_echo "$ac_link" | sed "$ax_pthread_sed"`
+ ax_pthread_2step_ac_link="($ac_compile) && (echo ==== >&5) && ($ax_pthread_link_step)"
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ for ax_pthread_try in '' -Qunused-arguments -Wno-unused-command-line-argument unknown; do
+ if test "x$ax_pthread_try" = "xunknown"; then :
+ break
+fi
+ CFLAGS="-Werror -Wunknown-warning-option $ax_pthread_try -pthread $ax_pthread_save_CFLAGS"
+ ac_link="$ax_pthread_save_ac_link"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int main(void){return 0;}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_link="$ax_pthread_2step_ac_link"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int main(void){return 0;}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ break
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+ ac_link="$ax_pthread_save_ac_link"
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ if test "x$ax_pthread_try" = "x"; then :
+ ax_pthread_try=no
+fi
+ ax_cv_PTHREAD_CLANG_NO_WARN_FLAG="$ax_pthread_try"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&5
+$as_echo "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&6; }
+
+ case "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" in
+ no | unknown) ;;
+ *) PTHREAD_CFLAGS="$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG $PTHREAD_CFLAGS" ;;
+ esac
+
+fi # $ax_pthread_clang = yes
+
+if test "x$ax_pthread_ok" = "xno"; then
+for ax_pthread_try_flag in $ax_pthread_flags; do
+
+ case $ax_pthread_try_flag in
+ none)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work without any flags" >&5
+$as_echo_n "checking whether pthreads work without any flags... " >&6; }
+ ;;
+
+ -mt,pthread)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with -mt -lpthread" >&5
+$as_echo_n "checking whether pthreads work with -mt -lpthread... " >&6; }
+ PTHREAD_CFLAGS="-mt"
+ PTHREAD_LIBS="-lpthread"
+ ;;
+
+ -*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with $ax_pthread_try_flag" >&5
+$as_echo_n "checking whether pthreads work with $ax_pthread_try_flag... " >&6; }
+ PTHREAD_CFLAGS="$ax_pthread_try_flag"
+ ;;
+
+ pthread-config)
+ # Extract the first word of "pthread-config", so it can be a program name with args.
+set dummy pthread-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ax_pthread_config+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ax_pthread_config"; then
+ ac_cv_prog_ax_pthread_config="$ax_pthread_config" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ax_pthread_config="yes"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ test -z "$ac_cv_prog_ax_pthread_config" && ac_cv_prog_ax_pthread_config="no"
+fi
+fi
+ax_pthread_config=$ac_cv_prog_ax_pthread_config
+if test -n "$ax_pthread_config"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_config" >&5
+$as_echo "$ax_pthread_config" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test "x$ax_pthread_config" = "xno"; then :
+ continue
+fi
+ PTHREAD_CFLAGS="`pthread-config --cflags`"
+ PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
+ ;;
+
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for the pthreads library -l$ax_pthread_try_flag" >&5
+$as_echo_n "checking for the pthreads library -l$ax_pthread_try_flag... " >&6; }
+ PTHREAD_LIBS="-l$ax_pthread_try_flag"
+ ;;
+ esac
+
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+
+ # Check for various functions. We must include pthread.h,
+ # since some functions may be macros. (On the Sequent, we
+ # need a special flag -Kthread to make this header compile.)
+ # We check for pthread_join because it is in -lpthread on IRIX
+ # while pthread_create is in libc. We check for pthread_attr_init
+ # due to DEC craziness with -lpthreads. We check for
+ # pthread_cleanup_push because it is one of the few pthread
+ # functions on Solaris that doesn't have a non-functional libc stub.
+ # We try pthread_create on general principles.
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <pthread.h>
+# if $ax_pthread_check_cond
+# error "$ax_pthread_check_macro must be defined"
+# endif
+ static void routine(void *a) { a = 0; }
+ static void *start_routine(void *a) { return a; }
+int
+main ()
+{
+pthread_t th; pthread_attr_t attr;
+ pthread_create(&th, 0, start_routine, 0);
+ pthread_join(th, 0);
+ pthread_attr_init(&attr);
+ pthread_cleanup_push(routine, 0);
+ pthread_cleanup_pop(0) /* ; */
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ax_pthread_ok=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_ok" >&5
+$as_echo "$ax_pthread_ok" >&6; }
+ if test "x$ax_pthread_ok" = "xyes"; then :
+ break
+fi
+
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+done
+fi
+
+# Various other checks:
+if test "x$ax_pthread_ok" = "xyes"; then
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+
+ # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for joinable pthread attribute" >&5
+$as_echo_n "checking for joinable pthread attribute... " >&6; }
+if ${ax_cv_PTHREAD_JOINABLE_ATTR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ax_cv_PTHREAD_JOINABLE_ATTR=unknown
+ for ax_pthread_attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <pthread.h>
+int
+main ()
+{
+int attr = $ax_pthread_attr; return attr /* ; */
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ax_cv_PTHREAD_JOINABLE_ATTR=$ax_pthread_attr; break
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_JOINABLE_ATTR" >&5
+$as_echo "$ax_cv_PTHREAD_JOINABLE_ATTR" >&6; }
+ if test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xunknown" && \
+ test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xPTHREAD_CREATE_JOINABLE" && \
+ test "x$ax_pthread_joinable_attr_defined" != "xyes"; then :
+
+cat >>confdefs.h <<_ACEOF
+#define PTHREAD_CREATE_JOINABLE $ax_cv_PTHREAD_JOINABLE_ATTR
+_ACEOF
+
+ ax_pthread_joinable_attr_defined=yes
+
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether more special flags are required for pthreads" >&5
+$as_echo_n "checking whether more special flags are required for pthreads... " >&6; }
+if ${ax_cv_PTHREAD_SPECIAL_FLAGS+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ax_cv_PTHREAD_SPECIAL_FLAGS=no
+ case $host_os in
+ solaris*)
+ ax_cv_PTHREAD_SPECIAL_FLAGS="-D_POSIX_PTHREAD_SEMANTICS"
+ ;;
+ esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_SPECIAL_FLAGS" >&5
+$as_echo "$ax_cv_PTHREAD_SPECIAL_FLAGS" >&6; }
+ if test "x$ax_cv_PTHREAD_SPECIAL_FLAGS" != "xno" && \
+ test "x$ax_pthread_special_flags_added" != "xyes"; then :
+ PTHREAD_CFLAGS="$ax_cv_PTHREAD_SPECIAL_FLAGS $PTHREAD_CFLAGS"
+ ax_pthread_special_flags_added=yes
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PTHREAD_PRIO_INHERIT" >&5
+$as_echo_n "checking for PTHREAD_PRIO_INHERIT... " >&6; }
+if ${ax_cv_PTHREAD_PRIO_INHERIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <pthread.h>
+int
+main ()
+{
+int i = PTHREAD_PRIO_INHERIT;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ax_cv_PTHREAD_PRIO_INHERIT=yes
+else
+ ax_cv_PTHREAD_PRIO_INHERIT=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_PRIO_INHERIT" >&5
+$as_echo "$ax_cv_PTHREAD_PRIO_INHERIT" >&6; }
+ if test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes" && \
+ test "x$ax_pthread_prio_inherit_defined" != "xyes"; then :
+
+$as_echo "#define HAVE_PTHREAD_PRIO_INHERIT 1" >>confdefs.h
+
+ ax_pthread_prio_inherit_defined=yes
+
+fi
+
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
+
+ # More AIX lossage: compile with *_r variant
+ if test "x$GCC" != "xyes"; then
+ case $host_os in
+ aix*)
+ case "x/$CC" in #(
+ x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6) :
+ #handle absolute path differently from PATH based program lookup
+ case "x$CC" in #(
+ x/*) :
+ if as_fn_executable_p ${CC}_r; then :
+ PTHREAD_CC="${CC}_r"
+fi ;; #(
+ *) :
+ for ac_prog in ${CC}_r
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_PTHREAD_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$PTHREAD_CC"; then
+ ac_cv_prog_PTHREAD_CC="$PTHREAD_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_PTHREAD_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+PTHREAD_CC=$ac_cv_prog_PTHREAD_CC
+if test -n "$PTHREAD_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PTHREAD_CC" >&5
+$as_echo "$PTHREAD_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$PTHREAD_CC" && break
+done
+test -n "$PTHREAD_CC" || PTHREAD_CC="$CC"
+ ;;
+esac ;; #(
+ *) :
+ ;;
+esac
+ ;;
+ esac
+ fi
+fi
+
+test -n "$PTHREAD_CC" || PTHREAD_CC="$CC"
+
+
+
+
+
+# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
+if test "x$ax_pthread_ok" = "xyes"; then
+ threads=yes
+ :
+else
+ ax_pthread_ok=no
+ threads=no
+fi
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+ if test "$threads" = "yes"; then
+ save_LIBS="$LIBS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ save_CXXFLAGS="$CXXFLAGS"
+ CXXFLAGS="$PTHREAD_CFLAGS $save_CFLAGS"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for std::thread" >&5
+$as_echo_n "checking for std::thread... " >&6; }
+if ${gdb_cv_cxx_std_thread+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <thread>
+ void callback() { }
+int
+main ()
+{
+std::thread t(callback);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ gdb_cv_cxx_std_thread=yes
+else
+ gdb_cv_cxx_std_thread=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gdb_cv_cxx_std_thread" >&5
+$as_echo "$gdb_cv_cxx_std_thread" >&6; }
+ LIBS="$save_LIBS"
+ CXXFLAGS="$save_CXXFLAGS"
+ fi
+ if test $gdb_cv_cxx_std_thread = yes; then
+
+$as_echo "#define CXX_STD_THREAD 1" >>confdefs.h
+
+ fi
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sigsetjmp" >&5
$as_echo_n "checking for sigsetjmp... " >&6; }
if ${gdb_cv_func_sigsetjmp+:} false; then :
diff --git a/gdb/gdbsupport/common.m4 b/gdb/gdbsupport/common.m4
index 903889463f1..0f0e9a866eb 100644
--- a/gdb/gdbsupport/common.m4
+++ b/gdb/gdbsupport/common.m4
@@ -36,6 +36,32 @@ AC_DEFUN([GDB_AC_COMMON], [
AC_CHECK_DECLS([strerror, strstr])
+ # Check for std::thread. This does not work on some platforms, like
+ # mingw and DJGPP.
+ AC_LANG_PUSH([C++])
+ AX_PTHREAD([threads=yes], [threads=no])
+ if test "$threads" = "yes"; then
+ save_LIBS="$LIBS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ save_CXXFLAGS="$CXXFLAGS"
+ CXXFLAGS="$PTHREAD_CFLAGS $save_CFLAGS"
+ AC_CACHE_CHECK([for std::thread],
+ gdb_cv_cxx_std_thread,
+ [AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
+ [[#include <thread>
+ void callback() { }]],
+ [[std::thread t(callback);]])],
+ gdb_cv_cxx_std_thread=yes,
+ gdb_cv_cxx_std_thread=no)])
+ LIBS="$save_LIBS"
+ CXXFLAGS="$save_CXXFLAGS"
+ fi
+ if test $gdb_cv_cxx_std_thread = yes; then
+ AC_DEFINE(CXX_STD_THREAD, 1,
+ [Define to 1 if std::thread works.])
+ fi
+ AC_LANG_POP
+
dnl Check if sigsetjmp is available. Using AC_CHECK_FUNCS won't
dnl do since sigsetjmp might only be defined as a macro.
AC_CACHE_CHECK([for sigsetjmp], gdb_cv_func_sigsetjmp,
--
2.17.2