This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[patch] aarch64: PR 19806: watchpoints: false negatives + PR 20207 contiguous ones
- From: Jan Kratochvil <jan dot kratochvil at redhat dot com>
- To: Pedro Alves <palves at redhat dot com>
- Cc: Yao Qi <qiyaoltc at gmail dot com>, gdb-patches at sourceware dot org
- Date: Wed, 2 May 2018 01:06:06 +0200
- Subject: [patch] aarch64: PR 19806: watchpoints: false negatives + PR 20207 contiguous ones
- References: <20170327210753.GA29656@host1.jankratochvil.net> <20171018195237.GA19714@host1.jankratochvil.net> <867evczxik.fsf@gmail.com> <20171103220437.GA13979@host1.jankratochvil.net> <20180321190316.GA32598@host1.jankratochvil.net> <1e06eb53-60f4-0800-a4f6-458e02f840bd@redhat.com> <20180426201216.GA218540@host1.jankratochvil.net> <20180501230339.GA3136080@host1.jankratochvil.net>
On Wed, 02 May 2018 01:03:39 +0200, Jan Kratochvil wrote:
> On Thu, 26 Apr 2018 22:12:16 +0200, Jan Kratochvil wrote:
> > On Fri, 20 Apr 2018 16:49:39 +0200, Pedro Alves wrote:
> > > ~~~~~~~~~~~~
> > > Previously, when the hardware reported a watchpoint hit on an address
> > > that did not match our watchpoint (this happens in case of instructions
> > > which access large chunks of memory such as "stp") the process would
> > > enter a loop where we would be continually resuming it (because we did
> > > not recognise that watchpoint hit) and it would keep hitting the
> > > watchpoint again and again. The tracing process would never get
> > > notified of the watchpoint hit.
> > > ~~~~~~~~~~~~
> > >
> > > ... I'm left with the impression that ADDR_TRAP could be even
> > > lower than addr_watch_aligned, in which case we'll still miss
> > > watchpoints. I wondering whether GDB should be using a similar
> > > trick as that kernel patch does.
> >
> > This is new for me what you found. I just did not expect the changed region
> > region could be larger than aligned 8 bytes.
> >
> > Unfortunately I cannot reproduce that so I cannot do much with that.
> > Does anyone know how to reproduce it?
>
> Attaching the change I made, I will repost the patch in a next mail.
Here is the new patch, if that new testcase
PASS: gdb.base/watchpoint-unaligned.exp: size8twice write
fails for anyone I can check how to avoid it.
Thanks,
Jan
gdb/ChangeLog:
yyyy-mm-dd Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
PR breakpoints/19806 and support for PR external/20207.
* NEWS: Mention Aarch64 watchpoint improvements.
* aarch64-linux-nat.c (aarch64_linux_stopped_data_address): Fix missed
watchpoints and PR external/20207 watchpoints.
* nat/aarch64-linux-hw-point.c
(kernel_supports_any_contiguous_range): New.
(aarch64_watchpoint_offset): New.
(aarch64_watchpoint_length): Support PR external/20207 watchpoints.
(aarch64_point_encode_ctrl_reg): New parameter offset, new asserts.
(aarch64_point_is_aligned): Support PR external/20207 watchpoints.
(aarch64_align_watchpoint): New parameters aligned_offset_p and
next_addr_orig_p. Support PR external/20207 watchpoints.
(aarch64_downgrade_regs): New.
(aarch64_dr_state_insert_one_point): New parameters offset and
addr_orig.
(aarch64_dr_state_remove_one_point): Likewise.
(aarch64_handle_breakpoint): Update caller.
(aarch64_handle_aligned_watchpoint): Likewise.
(aarch64_handle_unaligned_watchpoint): Support addr_orig and
aligned_offset.
(aarch64_linux_set_debug_regs): Remove const from state. Call
aarch64_downgrade_regs.
(aarch64_show_debug_reg_state): Print also dr_addr_orig_wp.
* nat/aarch64-linux-hw-point.h (DR_CONTROL_LENGTH): Rename to ...
(DR_CONTROL_MASK): ... this.
(struct aarch64_debug_reg_state): New field dr_addr_orig_wp.
(unsigned int aarch64_watchpoint_offset): New prototype.
(aarch64_linux_set_debug_regs): Remove const from state.
* utils.c (align_up, align_down): Move to ...
* common/common-utils.c (align_up, align_down): ... here.
* utils.h (align_up, align_down): Move to ...
* common/common-utils.h (align_up, align_down): ... here.
gdb/gdbserver/ChangeLog:
yyyy-mm-dd Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* linux-aarch64-low.c (aarch64_stopped_data_address):
Likewise.
gdb/testsuite/ChangeLog:
yyyy-mm-dd Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
PR breakpoints/19806 and support for PR external/20207.
* gdb.base/watchpoint-unaligned.c: New file.
* gdb.base/watchpoint-unaligned.exp: New file.
diff --git a/gdb/NEWS b/gdb/NEWS
index 6193070023..46f6635dda 100644
--- a/gdb/NEWS
+++ b/gdb/NEWS
@@ -42,6 +42,16 @@ SH-5/SH64 ELF sh64-*-elf*, SH-5/SH64 support in sh*
SH-5/SH64 running GNU/Linux SH-5/SH64 support in sh*-*-linux*
SH-5/SH64 running OpenBSD SH-5/SH64 support in sh*-*-openbsd*
+* Aarch64/Linux hardware watchpoints improvements
+
+ Hardware watchpoints on unaligned addresses are now properly
+ supported when running Linux kernel 4.10 or higher: read and access
+ watchpoints are no longer spuriously missed, and all watchpoints
+ lengths between 1 and 8 bytes are supported. On older kernels,
+ watchpoints set on unaligned addresses are no longer missed, with
+ the tradeoff that there is a possibility of false hits being
+ reported.
+
*** Changes in GDB 8.1
* GDB now supports dynamically creating arbitrary register groups specified
diff --git a/gdb/aarch64-linux-nat.c b/gdb/aarch64-linux-nat.c
index 9385659f14..421d044e10 100644
--- a/gdb/aarch64-linux-nat.c
+++ b/gdb/aarch64-linux-nat.c
@@ -735,16 +735,38 @@ aarch64_linux_stopped_data_address (struct target_ops *target,
state = aarch64_get_debug_reg_state (ptid_get_pid (inferior_ptid));
for (i = aarch64_num_wp_regs - 1; i >= 0; --i)
{
+ const unsigned int offset
+ = aarch64_watchpoint_offset (state->dr_ctrl_wp[i]);
const unsigned int len = aarch64_watchpoint_length (state->dr_ctrl_wp[i]);
const CORE_ADDR addr_trap = (CORE_ADDR) siginfo.si_addr;
- const CORE_ADDR addr_watch = state->dr_addr_wp[i];
+ const CORE_ADDR addr_watch = state->dr_addr_wp[i] + offset;
+ const CORE_ADDR addr_watch_aligned = align_down (state->dr_addr_wp[i], 8);
+ const CORE_ADDR addr_orig = state->dr_addr_orig_wp[i];
if (state->dr_ref_count_wp[i]
&& DR_CONTROL_ENABLED (state->dr_ctrl_wp[i])
- && addr_trap >= addr_watch
+ && addr_trap >= addr_watch_aligned
&& addr_trap < addr_watch + len)
{
- *addr_p = addr_trap;
+ /* ADDR_TRAP reports the first address of the memory range
+ accessed by the CPU, regardless of what was the memory
+ range watched. Thus, a large CPU access that straddles
+ the ADDR_WATCH..ADDR_WATCH+LEN range may result in an
+ ADDR_TRAP that is lower than the
+ ADDR_WATCH..ADDR_WATCH+LEN range. E.g.:
+
+ addr: | 4 | 5 | 6 | 7 | 8 |
+ |---- range watched ----|
+ |----------- range accessed ------------|
+
+ In this case, ADDR_TRAP will be 4.
+
+ To match a watchpoint known to GDB core, we must never
+ report *ADDR_P outside of any ADDR_WATCH..ADDR_WATCH+LEN
+ range. ADDR_WATCH <= ADDR_TRAP < ADDR_ORIG is a false
+ positive on kernels older than 4.10. See PR
+ external/20207. */
+ *addr_p = addr_orig;
return 1;
}
}
diff --git a/gdb/common/common-utils.c b/gdb/common/common-utils.c
index 80de826ba7..8d839d10fa 100644
--- a/gdb/common/common-utils.c
+++ b/gdb/common/common-utils.c
@@ -440,3 +440,23 @@ is_regular_file (const char *name, int *errno_ptr)
*errno_ptr = EINVAL;
return false;
}
+
+/* See common/common-utils.h. */
+
+ULONGEST
+align_up (ULONGEST v, int n)
+{
+ /* Check that N is really a power of two. */
+ gdb_assert (n && (n & (n-1)) == 0);
+ return (v + n - 1) & -n;
+}
+
+/* See common/common-utils.h. */
+
+ULONGEST
+align_down (ULONGEST v, int n)
+{
+ /* Check that N is really a power of two. */
+ gdb_assert (n && (n & (n-1)) == 0);
+ return (v & -n);
+}
diff --git a/gdb/common/common-utils.h b/gdb/common/common-utils.h
index 5408c35469..7bc6e90f05 100644
--- a/gdb/common/common-utils.h
+++ b/gdb/common/common-utils.h
@@ -151,4 +151,36 @@ in_inclusive_range (T value, T low, T high)
we're expecting a regular file. */
extern bool is_regular_file (const char *name, int *errno_ptr);
+/* Ensure that V is aligned to an N byte boundary (B's assumed to be a
+ power of 2). Round up/down when necessary. Examples of correct
+ use include:
+
+ addr = align_up (addr, 8); -- VALUE needs 8 byte alignment
+ write_memory (addr, value, len);
+ addr += len;
+
+ and:
+
+ sp = align_down (sp - len, 16); -- Keep SP 16 byte aligned
+ write_memory (sp, value, len);
+
+ Note that uses such as:
+
+ write_memory (addr, value, len);
+ addr += align_up (len, 8);
+
+ and:
+
+ sp -= align_up (len, 8);
+ write_memory (sp, value, len);
+
+ are typically not correct as they don't ensure that the address (SP
+ or ADDR) is correctly aligned (relying on previous alignment to
+ keep things right). This is also why the methods are called
+ "align_..." instead of "round_..." as the latter reads better with
+ this incorrect coding style. */
+
+extern ULONGEST align_up (ULONGEST v, int n);
+extern ULONGEST align_down (ULONGEST v, int n);
+
#endif
diff --git a/gdb/gdbserver/linux-aarch64-low.c b/gdb/gdbserver/linux-aarch64-low.c
index eccac4da13..7ea24c2363 100644
--- a/gdb/gdbserver/linux-aarch64-low.c
+++ b/gdb/gdbserver/linux-aarch64-low.c
@@ -360,14 +360,39 @@ aarch64_stopped_data_address (void)
state = aarch64_get_debug_reg_state (pid_of (current_thread));
for (i = aarch64_num_wp_regs - 1; i >= 0; --i)
{
+ const unsigned int offset
+ = aarch64_watchpoint_offset (state->dr_ctrl_wp[i]);
const unsigned int len = aarch64_watchpoint_length (state->dr_ctrl_wp[i]);
const CORE_ADDR addr_trap = (CORE_ADDR) siginfo.si_addr;
- const CORE_ADDR addr_watch = state->dr_addr_wp[i];
+ const CORE_ADDR addr_watch = state->dr_addr_wp[i] + offset;
+ const CORE_ADDR addr_watch_aligned = align_down (state->dr_addr_wp[i], 8);
+ const CORE_ADDR addr_orig = state->dr_addr_orig_wp[i];
+
if (state->dr_ref_count_wp[i]
&& DR_CONTROL_ENABLED (state->dr_ctrl_wp[i])
- && addr_trap >= addr_watch
+ && addr_trap >= addr_watch_aligned
&& addr_trap < addr_watch + len)
- return addr_trap;
+ {
+ /* ADDR_TRAP reports the first address of the memory range
+ accessed by the CPU, regardless of what was the memory
+ range watched. Thus, a large CPU access that straddles
+ the ADDR_WATCH..ADDR_WATCH+LEN range may result in an
+ ADDR_TRAP that is lower than the
+ ADDR_WATCH..ADDR_WATCH+LEN range. E.g.:
+
+ addr: | 4 | 5 | 6 | 7 | 8 |
+ |---- range watched ----|
+ |----------- range accessed ------------|
+
+ In this case, ADDR_TRAP will be 4.
+
+ To match a watchpoint known to GDB core, we must never
+ report *ADDR_P outside of any ADDR_WATCH..ADDR_WATCH+LEN
+ range. ADDR_WATCH <= ADDR_TRAP < ADDR_ORIG is a false
+ positive on kernels older than 4.10. See PR
+ external/20207. */
+ return addr_orig;
+ }
}
return (CORE_ADDR) 0;
diff --git a/gdb/nat/aarch64-linux-hw-point.c b/gdb/nat/aarch64-linux-hw-point.c
index ce26f28fad..a3931ea6a9 100644
--- a/gdb/nat/aarch64-linux-hw-point.c
+++ b/gdb/nat/aarch64-linux-hw-point.c
@@ -34,29 +34,52 @@
int aarch64_num_bp_regs;
int aarch64_num_wp_regs;
+/* True if this kernel does not have the bug described by PR
+ external/20207 (Linux >= 4.10). A fixed kernel supports any
+ contiguous range of bits in 8-bit byte DR_CONTROL_MASK. A buggy
+ kernel supports only 0x01, 0x03, 0x0f and 0xff. We start by
+ assuming the bug is fixed, and then detect the bug at
+ PTRACE_SETREGSET time. */
+static bool kernel_supports_any_contiguous_range = true;
+
+/* Return starting byte 0..7 incl. of a watchpoint encoded by CTRL. */
+
+unsigned int
+aarch64_watchpoint_offset (unsigned int ctrl)
+{
+ uint8_t mask = DR_CONTROL_MASK (ctrl);
+ unsigned retval;
+
+ /* Shift out bottom zeros. */
+ for (retval = 0; mask && (mask & 1) == 0; ++retval)
+ mask >>= 1;
+
+ return retval;
+}
+
/* Utility function that returns the length in bytes of a watchpoint
according to the content of a hardware debug control register CTRL.
- Note that the kernel currently only supports the following Byte
- Address Select (BAS) values: 0x1, 0x3, 0xf and 0xff, which means
- that for a hardware watchpoint, its valid length can only be 1
- byte, 2 bytes, 4 bytes or 8 bytes. */
+ Any contiguous range of bytes in CTRL is supported. The returned
+ value can be between 0..8 (inclusive). */
unsigned int
aarch64_watchpoint_length (unsigned int ctrl)
{
- switch (DR_CONTROL_LENGTH (ctrl))
- {
- case 0x01:
- return 1;
- case 0x03:
- return 2;
- case 0x0f:
- return 4;
- case 0xff:
- return 8;
- default:
- return 0;
- }
+ uint8_t mask = DR_CONTROL_MASK (ctrl);
+ unsigned retval;
+
+ /* Shift out bottom zeros. */
+ mask >>= aarch64_watchpoint_offset (ctrl);
+
+ /* Count bottom ones. */
+ for (retval = 0; (mask & 1) != 0; ++retval)
+ mask >>= 1;
+
+ if (mask != 0)
+ error (_("Unexpected hardware watchpoint length register value 0x%x"),
+ DR_CONTROL_MASK (ctrl));
+
+ return retval;
}
/* Given the hardware breakpoint or watchpoint type TYPE and its
@@ -64,10 +87,13 @@ aarch64_watchpoint_length (unsigned int ctrl)
breakpoint/watchpoint control register. */
static unsigned int
-aarch64_point_encode_ctrl_reg (enum target_hw_bp_type type, int len)
+aarch64_point_encode_ctrl_reg (enum target_hw_bp_type type, int offset, int len)
{
unsigned int ctrl, ttype;
+ gdb_assert (offset == 0 || kernel_supports_any_contiguous_range);
+ gdb_assert (offset + len <= AARCH64_HWP_MAX_LEN_PER_REG);
+
/* type */
switch (type)
{
@@ -89,8 +115,8 @@ aarch64_point_encode_ctrl_reg (enum target_hw_bp_type type, int len)
ctrl = ttype << 3;
- /* length bitmask */
- ctrl |= ((1 << len) - 1) << 5;
+ /* offset and length bitmask */
+ ctrl |= ((1 << len) - 1) << (5 + offset);
/* enabled at el0 */
ctrl |= (2 << 1) | 1;
@@ -134,58 +160,65 @@ aarch64_point_is_aligned (int is_watchpoint, CORE_ADDR addr, int len)
if (addr & (alignment - 1))
return 0;
- if (len != 8 && len != 4 && len != 2 && len != 1)
+ if ((!kernel_supports_any_contiguous_range
+ && len != 8 && len != 4 && len != 2 && len != 1)
+ || (kernel_supports_any_contiguous_range
+ && (len < 1 || len > 8)))
return 0;
return 1;
}
/* Given the (potentially unaligned) watchpoint address in ADDR and
- length in LEN, return the aligned address and aligned length in
- *ALIGNED_ADDR_P and *ALIGNED_LEN_P, respectively. The returned
- aligned address and length will be valid values to write to the
- hardware watchpoint value and control registers.
+ length in LEN, return the aligned address, offset from that base
+ address, and aligned length in *ALIGNED_ADDR_P, *ALIGNED_OFFSET_P
+ and *ALIGNED_LEN_P, respectively. The returned values will be
+ valid values to write to the hardware watchpoint value and control
+ registers.
The given watchpoint may get truncated if more than one hardware
register is needed to cover the watched region. *NEXT_ADDR_P
and *NEXT_LEN_P, if non-NULL, will return the address and length
of the remaining part of the watchpoint (which can be processed
- by calling this routine again to generate another aligned address
- and length pair.
+ by calling this routine again to generate another aligned address,
+ offset and length tuple.
Essentially, unaligned watchpoint is achieved by minimally
enlarging the watched area to meet the alignment requirement, and
if necessary, splitting the watchpoint over several hardware
- watchpoint registers. The trade-off is that there will be
- false-positive hits for the read-type or the access-type hardware
- watchpoints; for the write type, which is more commonly used, there
- will be no such issues, as the higher-level breakpoint management
- in gdb always examines the exact watched region for any content
- change, and transparently resumes a thread from a watchpoint trap
- if there is no change to the watched region.
+ watchpoint registers.
+
+ On kernels that predate the support for Byte Address Select (BAS)
+ in the hardware watchpoint control register, the offset from the
+ base address is always zero, and so in that case the trade-off is
+ that there will be false-positive hits for the read-type or the
+ access-type hardware watchpoints; for the write type, which is more
+ commonly used, there will be no such issues, as the higher-level
+ breakpoint management in gdb always examines the exact watched
+ region for any content change, and transparently resumes a thread
+ from a watchpoint trap if there is no change to the watched region.
Another limitation is that because the watched region is enlarged,
- the watchpoint fault address returned by
+ the watchpoint fault address discovered by
aarch64_stopped_data_address may be outside of the original watched
region, especially when the triggering instruction is accessing a
larger region. When the fault address is not within any known
range, watchpoints_triggered in gdb will get confused, as the
higher-level watchpoint management is only aware of original
watched regions, and will think that some unknown watchpoint has
- been triggered. In such a case, gdb may stop without displaying
- any detailed information.
-
- Once the kernel provides the full support for Byte Address Select
- (BAS) in the hardware watchpoint control register, these
- limitations can be largely relaxed with some further work. */
+ been triggered. To prevent such a case,
+ aarch64_stopped_data_address implementations in gdb and gdbserver
+ try to match the trapped address with a watched region, and return
+ an address within the latter. */
static void
aarch64_align_watchpoint (CORE_ADDR addr, int len, CORE_ADDR *aligned_addr_p,
- int *aligned_len_p, CORE_ADDR *next_addr_p,
- int *next_len_p)
+ int *aligned_offset_p, int *aligned_len_p,
+ CORE_ADDR *next_addr_p, int *next_len_p,
+ CORE_ADDR *next_addr_orig_p)
{
int aligned_len;
- unsigned int offset;
+ unsigned int offset, aligned_offset;
CORE_ADDR aligned_addr;
const unsigned int alignment = AARCH64_HWP_ALIGNMENT;
const unsigned int max_wp_len = AARCH64_HWP_MAX_LEN_PER_REG;
@@ -196,10 +229,12 @@ aarch64_align_watchpoint (CORE_ADDR addr, int len, CORE_ADDR *aligned_addr_p,
if (len <= 0)
return;
- /* Address to be put into the hardware watchpoint value register
- must be aligned. */
+ /* The address put into the hardware watchpoint value register must
+ be aligned. */
offset = addr & (alignment - 1);
aligned_addr = addr - offset;
+ aligned_offset
+ = kernel_supports_any_contiguous_range ? addr & (alignment - 1) : 0;
gdb_assert (offset >= 0 && offset < alignment);
gdb_assert (aligned_addr >= 0 && aligned_addr <= addr);
@@ -207,9 +242,10 @@ aarch64_align_watchpoint (CORE_ADDR addr, int len, CORE_ADDR *aligned_addr_p,
if (offset + len >= max_wp_len)
{
- /* Need more than one watchpoint registers; truncate it at the
+ /* Need more than one watchpoint register; truncate at the
alignment boundary. */
- aligned_len = max_wp_len;
+ aligned_len
+ = max_wp_len - (kernel_supports_any_contiguous_range ? offset : 0);
len -= (max_wp_len - offset);
addr += (max_wp_len - offset);
gdb_assert ((addr & (alignment - 1)) == 0);
@@ -222,19 +258,24 @@ aarch64_align_watchpoint (CORE_ADDR addr, int len, CORE_ADDR *aligned_addr_p,
aligned_len_array[AARCH64_HWP_MAX_LEN_PER_REG] =
{ 1, 2, 4, 4, 8, 8, 8, 8 };
- aligned_len = aligned_len_array[offset + len - 1];
+ aligned_len = (kernel_supports_any_contiguous_range
+ ? len : aligned_len_array[offset + len - 1]);
addr += len;
len = 0;
}
if (aligned_addr_p)
*aligned_addr_p = aligned_addr;
+ if (aligned_offset_p)
+ *aligned_offset_p = aligned_offset;
if (aligned_len_p)
*aligned_len_p = aligned_len;
if (next_addr_p)
*next_addr_p = addr;
if (next_len_p)
*next_len_p = len;
+ if (next_addr_orig_p)
+ *next_addr_orig_p = align_down (*next_addr_orig_p + alignment, alignment);
}
struct aarch64_dr_update_callback_param
@@ -324,17 +365,73 @@ aarch64_notify_debug_reg_change (const struct aarch64_debug_reg_state *state,
iterate_over_lwps (pid_ptid, debug_reg_change_callback, (void *) ¶m);
}
+/* Reconfigure STATE to be compatible with Linux kernels with the PR
+ external/20207 bug. This is called when
+ KERNEL_SUPPORTS_ANY_CONTIGUOUS_RANGE transitions to false. Note we
+ don't try to support combining watchpoints with matching (and thus
+ shared) masks, as it's too late when we get here. On buggy
+ kernels, GDB will try to first setup the perfect matching ranges,
+ which will run out of registers before this function can merge
+ them. It doesn't look like worth the effort to improve that, given
+ eventually buggy kernels will be phased out. */
+
+static void
+aarch64_downgrade_regs (struct aarch64_debug_reg_state *state)
+{
+ for (int i = 0; i < aarch64_num_wp_regs; ++i)
+ if ((state->dr_ctrl_wp[i] & 1) != 0)
+ {
+ gdb_assert (state->dr_ref_count_wp[i] != 0);
+ uint8_t mask_orig = (state->dr_ctrl_wp[i] >> 5) & 0xff;
+ gdb_assert (mask_orig != 0);
+ static const uint8_t old_valid[] = { 0x01, 0x03, 0x0f, 0xff };
+ uint8_t mask = 0;
+ for (const uint8_t old_mask : old_valid)
+ if (mask_orig <= old_mask)
+ {
+ mask = old_mask;
+ break;
+ }
+ gdb_assert (mask != 0);
+
+ /* No update needed for this watchpoint? */
+ if (mask == mask_orig)
+ continue;
+ state->dr_ctrl_wp[i] |= mask << 5;
+ state->dr_addr_wp[i]
+ = align_down (state->dr_addr_wp[i], AARCH64_HWP_ALIGNMENT);
+
+ /* Try to match duplicate entries. */
+ for (int j = 0; j < i; ++j)
+ if ((state->dr_ctrl_wp[j] & 1) != 0
+ && state->dr_addr_wp[j] == state->dr_addr_wp[i]
+ && state->dr_addr_orig_wp[j] == state->dr_addr_orig_wp[i]
+ && state->dr_ctrl_wp[j] == state->dr_ctrl_wp[i])
+ {
+ state->dr_ref_count_wp[j] += state->dr_ref_count_wp[i];
+ state->dr_ref_count_wp[i] = 0;
+ state->dr_addr_wp[i] = 0;
+ state->dr_addr_orig_wp[i] = 0;
+ state->dr_ctrl_wp[i] &= ~1;
+ break;
+ }
+
+ aarch64_notify_debug_reg_change (state, 1 /* is_watchpoint */, i);
+ }
+}
+
/* Record the insertion of one breakpoint/watchpoint, as represented
by ADDR and CTRL, in the process' arch-specific data area *STATE. */
static int
aarch64_dr_state_insert_one_point (struct aarch64_debug_reg_state *state,
enum target_hw_bp_type type,
- CORE_ADDR addr, int len)
+ CORE_ADDR addr, int offset, int len,
+ CORE_ADDR addr_orig)
{
int i, idx, num_regs, is_watchpoint;
unsigned int ctrl, *dr_ctrl_p, *dr_ref_count;
- CORE_ADDR *dr_addr_p;
+ CORE_ADDR *dr_addr_p, *dr_addr_orig_p;
/* Set up state pointers. */
is_watchpoint = (type != hw_execute);
@@ -343,6 +440,7 @@ aarch64_dr_state_insert_one_point (struct aarch64_debug_reg_state *state,
{
num_regs = aarch64_num_wp_regs;
dr_addr_p = state->dr_addr_wp;
+ dr_addr_orig_p = state->dr_addr_orig_wp;
dr_ctrl_p = state->dr_ctrl_wp;
dr_ref_count = state->dr_ref_count_wp;
}
@@ -350,11 +448,12 @@ aarch64_dr_state_insert_one_point (struct aarch64_debug_reg_state *state,
{
num_regs = aarch64_num_bp_regs;
dr_addr_p = state->dr_addr_bp;
+ dr_addr_orig_p = nullptr;
dr_ctrl_p = state->dr_ctrl_bp;
dr_ref_count = state->dr_ref_count_bp;
}
- ctrl = aarch64_point_encode_ctrl_reg (type, len);
+ ctrl = aarch64_point_encode_ctrl_reg (type, offset, len);
/* Find an existing or free register in our cache. */
idx = -1;
@@ -366,7 +465,9 @@ aarch64_dr_state_insert_one_point (struct aarch64_debug_reg_state *state,
idx = i;
/* no break; continue hunting for an exising one. */
}
- else if (dr_addr_p[i] == addr && dr_ctrl_p[i] == ctrl)
+ else if (dr_addr_p[i] == addr
+ && (dr_addr_orig_p == nullptr || dr_addr_orig_p[i] == addr_orig)
+ && dr_ctrl_p[i] == ctrl)
{
gdb_assert (dr_ref_count[i] != 0);
idx = i;
@@ -383,6 +484,8 @@ aarch64_dr_state_insert_one_point (struct aarch64_debug_reg_state *state,
{
/* new entry */
dr_addr_p[idx] = addr;
+ if (dr_addr_orig_p != nullptr)
+ dr_addr_orig_p[idx] = addr_orig;
dr_ctrl_p[idx] = ctrl;
dr_ref_count[idx] = 1;
/* Notify the change. */
@@ -403,11 +506,12 @@ aarch64_dr_state_insert_one_point (struct aarch64_debug_reg_state *state,
static int
aarch64_dr_state_remove_one_point (struct aarch64_debug_reg_state *state,
enum target_hw_bp_type type,
- CORE_ADDR addr, int len)
+ CORE_ADDR addr, int offset, int len,
+ CORE_ADDR addr_orig)
{
int i, num_regs, is_watchpoint;
unsigned int ctrl, *dr_ctrl_p, *dr_ref_count;
- CORE_ADDR *dr_addr_p;
+ CORE_ADDR *dr_addr_p, *dr_addr_orig_p;
/* Set up state pointers. */
is_watchpoint = (type != hw_execute);
@@ -415,6 +519,7 @@ aarch64_dr_state_remove_one_point (struct aarch64_debug_reg_state *state,
{
num_regs = aarch64_num_wp_regs;
dr_addr_p = state->dr_addr_wp;
+ dr_addr_orig_p = state->dr_addr_orig_wp;
dr_ctrl_p = state->dr_ctrl_wp;
dr_ref_count = state->dr_ref_count_wp;
}
@@ -422,15 +527,18 @@ aarch64_dr_state_remove_one_point (struct aarch64_debug_reg_state *state,
{
num_regs = aarch64_num_bp_regs;
dr_addr_p = state->dr_addr_bp;
+ dr_addr_orig_p = nullptr;
dr_ctrl_p = state->dr_ctrl_bp;
dr_ref_count = state->dr_ref_count_bp;
}
- ctrl = aarch64_point_encode_ctrl_reg (type, len);
+ ctrl = aarch64_point_encode_ctrl_reg (type, offset, len);
/* Find the entry that matches the ADDR and CTRL. */
for (i = 0; i < num_regs; ++i)
- if (dr_addr_p[i] == addr && dr_ctrl_p[i] == ctrl)
+ if (dr_addr_p[i] == addr
+ && (dr_addr_orig_p == nullptr || dr_addr_orig_p[i] == addr_orig)
+ && dr_ctrl_p[i] == ctrl)
{
gdb_assert (dr_ref_count[i] != 0);
break;
@@ -446,6 +554,8 @@ aarch64_dr_state_remove_one_point (struct aarch64_debug_reg_state *state,
/* Clear the enable bit. */
ctrl &= ~1;
dr_addr_p[i] = 0;
+ if (dr_addr_orig_p != nullptr)
+ dr_addr_orig_p[i] = 0;
dr_ctrl_p[i] = ctrl;
/* Notify the change. */
aarch64_notify_debug_reg_change (state, is_watchpoint, i);
@@ -472,10 +582,10 @@ aarch64_handle_breakpoint (enum target_hw_bp_type type, CORE_ADDR addr,
if (!aarch64_point_is_aligned (0 /* is_watchpoint */ , addr, len))
return -1;
- return aarch64_dr_state_insert_one_point (state, type, addr, len);
+ return aarch64_dr_state_insert_one_point (state, type, addr, 0, len, -1);
}
else
- return aarch64_dr_state_remove_one_point (state, type, addr, len);
+ return aarch64_dr_state_remove_one_point (state, type, addr, 0, len, -1);
}
/* This is essentially the same as aarch64_handle_breakpoint, apart
@@ -487,9 +597,9 @@ aarch64_handle_aligned_watchpoint (enum target_hw_bp_type type,
struct aarch64_debug_reg_state *state)
{
if (is_insert)
- return aarch64_dr_state_insert_one_point (state, type, addr, len);
+ return aarch64_dr_state_insert_one_point (state, type, addr, 0, len, addr);
else
- return aarch64_dr_state_remove_one_point (state, type, addr, len);
+ return aarch64_dr_state_remove_one_point (state, type, addr, 0, len, addr);
}
/* Insert/remove unaligned watchpoint by calling
@@ -504,29 +614,42 @@ aarch64_handle_unaligned_watchpoint (enum target_hw_bp_type type,
CORE_ADDR addr, int len, int is_insert,
struct aarch64_debug_reg_state *state)
{
+ CORE_ADDR addr_orig = addr;
+
while (len > 0)
{
CORE_ADDR aligned_addr;
- int aligned_len, ret;
+ int aligned_offset, aligned_len, ret;
+ CORE_ADDR addr_orig_next = addr_orig;
- aarch64_align_watchpoint (addr, len, &aligned_addr, &aligned_len,
- &addr, &len);
+ aarch64_align_watchpoint (addr, len, &aligned_addr, &aligned_offset,
+ &aligned_len, &addr, &len, &addr_orig_next);
if (is_insert)
ret = aarch64_dr_state_insert_one_point (state, type, aligned_addr,
- aligned_len);
+ aligned_offset,
+ aligned_len, addr_orig);
else
ret = aarch64_dr_state_remove_one_point (state, type, aligned_addr,
- aligned_len);
+ aligned_offset,
+ aligned_len, addr_orig);
if (show_debug_regs)
debug_printf ("handle_unaligned_watchpoint: is_insert: %d\n"
" "
"aligned_addr: %s, aligned_len: %d\n"
" "
- "next_addr: %s, next_len: %d\n",
+ "addr_orig: %s\n"
+ " "
+ "next_addr: %s, next_len: %d\n"
+ " "
+ "addr_orig_next: %s\n",
is_insert, core_addr_to_string_nz (aligned_addr),
- aligned_len, core_addr_to_string_nz (addr), len);
+ aligned_len, core_addr_to_string_nz (addr_orig),
+ core_addr_to_string_nz (addr), len,
+ core_addr_to_string_nz (addr_orig_next));
+
+ addr_orig = addr_orig_next;
if (ret != 0)
return ret;
@@ -552,7 +675,7 @@ aarch64_handle_watchpoint (enum target_hw_bp_type type, CORE_ADDR addr,
registers with data from *STATE. */
void
-aarch64_linux_set_debug_regs (const struct aarch64_debug_reg_state *state,
+aarch64_linux_set_debug_regs (struct aarch64_debug_reg_state *state,
int tid, int watchpoint)
{
int i, count;
@@ -580,7 +703,18 @@ aarch64_linux_set_debug_regs (const struct aarch64_debug_reg_state *state,
if (ptrace (PTRACE_SETREGSET, tid,
watchpoint ? NT_ARM_HW_WATCH : NT_ARM_HW_BREAK,
(void *) &iov))
- error (_("Unexpected error setting hardware debug registers"));
+ {
+ /* Handle Linux kernels with the PR external/20207 bug. */
+ if (watchpoint && errno == EINVAL
+ && kernel_supports_any_contiguous_range)
+ {
+ kernel_supports_any_contiguous_range = false;
+ aarch64_downgrade_regs (state);
+ aarch64_linux_set_debug_regs (state, tid, watchpoint);
+ return;
+ }
+ error (_("Unexpected error setting hardware debug registers"));
+ }
}
/* Print the values of the cached breakpoint/watchpoint registers. */
@@ -611,8 +745,9 @@ aarch64_show_debug_reg_state (struct aarch64_debug_reg_state *state,
debug_printf ("\tWATCHPOINTs:\n");
for (i = 0; i < aarch64_num_wp_regs; i++)
- debug_printf ("\tWP%d: addr=%s, ctrl=0x%08x, ref.count=%d\n",
+ debug_printf ("\tWP%d: addr=%s (orig=%s), ctrl=0x%08x, ref.count=%d\n",
i, core_addr_to_string_nz (state->dr_addr_wp[i]),
+ core_addr_to_string_nz (state->dr_addr_orig_wp[i]),
state->dr_ctrl_wp[i], state->dr_ref_count_wp[i]);
}
diff --git a/gdb/nat/aarch64-linux-hw-point.h b/gdb/nat/aarch64-linux-hw-point.h
index 7c42b96d1b..1940b06a89 100644
--- a/gdb/nat/aarch64-linux-hw-point.h
+++ b/gdb/nat/aarch64-linux-hw-point.h
@@ -77,13 +77,13 @@
31 13 5 3 1 0
+--------------------------------+----------+------+------+----+
- | RESERVED (SBZ) | LENGTH | TYPE | PRIV | EN |
+ | RESERVED (SBZ) | MASK | TYPE | PRIV | EN |
+--------------------------------+----------+------+------+----+
The TYPE field is ignored for breakpoints. */
#define DR_CONTROL_ENABLED(ctrl) (((ctrl) & 0x1) == 1)
-#define DR_CONTROL_LENGTH(ctrl) (((ctrl) >> 5) & 0xff)
+#define DR_CONTROL_MASK(ctrl) (((ctrl) >> 5) & 0xff)
/* Each bit of a variable of this type is used to indicate whether a
hardware breakpoint or watchpoint setting has been changed since
@@ -147,7 +147,10 @@ struct aarch64_debug_reg_state
unsigned int dr_ref_count_bp[AARCH64_HBP_MAX_NUM];
/* hardware watchpoint */
+ /* Address aligned down to AARCH64_HWP_ALIGNMENT. */
CORE_ADDR dr_addr_wp[AARCH64_HWP_MAX_NUM];
+ /* Address as entered by user without any forced alignment. */
+ CORE_ADDR dr_addr_orig_wp[AARCH64_HWP_MAX_NUM];
unsigned int dr_ctrl_wp[AARCH64_HWP_MAX_NUM];
unsigned int dr_ref_count_wp[AARCH64_HWP_MAX_NUM];
};
@@ -166,6 +169,7 @@ struct arch_lwp_info
extern int aarch64_num_bp_regs;
extern int aarch64_num_wp_regs;
+unsigned int aarch64_watchpoint_offset (unsigned int ctrl);
unsigned int aarch64_watchpoint_length (unsigned int ctrl);
int aarch64_handle_breakpoint (enum target_hw_bp_type type, CORE_ADDR addr,
@@ -175,7 +179,7 @@ int aarch64_handle_watchpoint (enum target_hw_bp_type type, CORE_ADDR addr,
int len, int is_insert,
struct aarch64_debug_reg_state *state);
-void aarch64_linux_set_debug_regs (const struct aarch64_debug_reg_state *state,
+void aarch64_linux_set_debug_regs (struct aarch64_debug_reg_state *state,
int tid, int watchpoint);
void aarch64_show_debug_reg_state (struct aarch64_debug_reg_state *state,
diff --git a/gdb/testsuite/gdb.base/watchpoint-unaligned.c b/gdb/testsuite/gdb.base/watchpoint-unaligned.c
new file mode 100644
index 0000000000..97832a05d4
--- /dev/null
+++ b/gdb/testsuite/gdb.base/watchpoint-unaligned.c
@@ -0,0 +1,89 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2017-2018 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include <stdint.h>
+#include <assert.h>
+
+static int again;
+
+static volatile struct
+{
+ uint64_t alignment;
+ union
+ {
+ uint64_t size8[1];
+ uint32_t size4[2];
+ uint16_t size2[4];
+ uint8_t size1[8];
+ uint64_t size8twice[2];
+ }
+ u;
+} data;
+
+static int size = 0;
+static int offset;
+
+static void
+write_size8twice (void)
+{
+ static const uint64_t first = 1;
+ static const uint64_t second = 2;
+
+#ifdef __aarch64__
+ asm volatile ("stp %1, %2, [%0]"
+ : /* output */
+ : "r" (data.u.size8twice), "r" (first), "r" (second) /* input */
+ : "memory" /* clobber */);
+#else
+ data.u.size8twice[0] = first;
+ data.u.size8twice[1] = second;
+#endif
+}
+
+int
+main (void)
+{
+ volatile uint64_t local;
+
+ assert (sizeof (data) == 8 + 2 * 8);
+
+ write_size8twice ();
+
+ while (size)
+ {
+ switch (size)
+ {
+ case 8:
+ local = data.u.size8[offset];
+ break;
+ case 4:
+ local = data.u.size4[offset];
+ break;
+ case 2:
+ local = data.u.size2[offset];
+ break;
+ case 1:
+ local = data.u.size1[offset];
+ break;
+ default:
+ assert (0);
+ }
+ size = 0;
+ size = size; /* start_again */
+ }
+ return 0; /* final_return */
+}
diff --git a/gdb/testsuite/gdb.base/watchpoint-unaligned.exp b/gdb/testsuite/gdb.base/watchpoint-unaligned.exp
new file mode 100644
index 0000000000..25a15a89fd
--- /dev/null
+++ b/gdb/testsuite/gdb.base/watchpoint-unaligned.exp
@@ -0,0 +1,142 @@
+# Copyright 2017-2018 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# This file is part of the gdb testsuite.
+
+# Test inserting read watchpoints on unaligned addresses.
+
+standard_testfile
+if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile}] } {
+ return -1
+}
+
+if ![runto_main] {
+ untested "could not run to main"
+ return -1
+}
+
+gdb_breakpoint [gdb_get_line_number "start_again"] "Breakpoint $decimal at $hex" "start_again"
+
+set sizes {1 2 4 8}
+array set alignedend {1 1 2 2 3 4 4 4 5 8 6 8 7 8 8 8}
+
+foreach wpsize $sizes {
+ for {set wpoffset 0} {$wpoffset < 8 / $wpsize} {incr wpoffset} {
+ set wpstart [expr $wpoffset * $wpsize]
+ set wpend [expr ($wpoffset + 1) * $wpsize]
+ set wpendaligned $alignedend($wpend)
+ foreach rdsize $sizes {
+ for {set rdoffset 0} {$rdoffset < 8 / $rdsize} {incr rdoffset} {
+ set rdstart [expr $rdoffset * $rdsize]
+ set rdend [expr ($rdoffset + 1) * $rdsize]
+ set expect_hit [expr max ($wpstart, $rdstart) < min ($wpend, $rdend)]
+ set test "rwatch data.u.size$wpsize\[$wpoffset\]"
+ set wpnum ""
+ gdb_test_multiple $test $test {
+ -re "Hardware read watchpoint (\[0-9\]+): .*\r\n$gdb_prompt $" {
+ set wpnum $expect_out(1,string)
+ }
+ }
+ gdb_test_no_output "set variable size = $rdsize" ""
+ gdb_test_no_output "set variable offset = $rdoffset" ""
+ set test "continue"
+ set got_hit 0
+ gdb_test_multiple $test $test {
+ -re "Hardware read watchpoint $wpnum:.*Value = .*\r\n$gdb_prompt $" {
+ set got_hit 1
+ send_gdb "continue\n"
+ exp_continue
+ }
+ -re " start_again .*\r\n$gdb_prompt $" {
+ }
+ }
+ gdb_test_no_output "delete $wpnum" ""
+ set test "wp(size=$wpsize offset=$wpoffset) rd(size=$rdsize offset=$rdoffset) expect=$expect_hit"
+ if {$expect_hit == $got_hit} {
+ pass $test
+ } else {
+ # We do not know if we run on a fixed Linux kernel
+ # or not. Report XFAIL only in the FAIL case.
+ if {$expect_hit == 0 && $rdstart < $wpendaligned} {
+ setup_xfail external/20207 "aarch64*-*-linux*"
+ }
+ fail $test
+ }
+ }
+ }
+ }
+}
+
+foreach wpcount {4 7} {
+ array set wpoffset_to_wpnum {}
+ for {set wpoffset 1} {$wpoffset <= $wpcount} {incr wpoffset} {
+ set test "rwatch data.u.size1\[$wpoffset\]"
+ set wpnum ""
+ gdb_test_multiple $test $test {
+ -re "Hardware read watchpoint (\[0-9\]+): .*\r\n$gdb_prompt $" {
+ set wpoffset_to_wpnum($wpoffset) $expect_out(1,string)
+ }
+ }
+ }
+ gdb_test_no_output "set variable size = 1" ""
+ gdb_test_no_output "set variable offset = 1" ""
+ set test "continue"
+ set got_hit 0
+ gdb_test_multiple $test $test {
+ -re "\r\nCould not insert hardware watchpoint .*\r\n$gdb_prompt $" {
+ }
+ -re "Hardware read watchpoint $wpoffset_to_wpnum(1):.*Value = .*\r\n$gdb_prompt $" {
+ set got_hit 1
+ send_gdb "continue\n"
+ exp_continue
+ }
+ -re " start_again .*\r\n$gdb_prompt $" {
+ }
+ }
+ for {set wpoffset 1} {$wpoffset <= $wpcount} {incr wpoffset} {
+ gdb_test_no_output "delete $wpoffset_to_wpnum($wpoffset)" ""
+ }
+ set test "wpcount($wpcount)"
+ if {$wpcount > 4} {
+ setup_kfail tdep/22389 *-*-*
+ }
+ gdb_assert $got_hit $test
+}
+
+if ![runto_main] {
+ return -1
+}
+gdb_breakpoint [gdb_get_line_number "final_return"] "Breakpoint $decimal at $hex" "final_return"
+set test {watch data.u.size8twice[1]}
+set wpnum ""
+gdb_test_multiple $test $test {
+ -re "Hardware watchpoint (\[0-9\]+): .*\r\n$gdb_prompt $" {
+ set wpnum $expect_out(1,string)
+ }
+}
+set test "continue"
+set got_hit 0
+gdb_test_multiple $test $test {
+ -re "\r\nCould not insert hardware watchpoint .*\r\n$gdb_prompt $" {
+ }
+ -re "Hardware watchpoint $wpnum:.*New value = .*\r\n$gdb_prompt $" {
+ set got_hit 1
+ send_gdb "continue\n"
+ exp_continue
+ }
+ -re " final_return .*\r\n$gdb_prompt $" {
+ }
+}
+gdb_assert $got_hit "size8twice write"
diff --git a/gdb/utils.c b/gdb/utils.c
index b957b0dc5c..e274f02676 100644
--- a/gdb/utils.c
+++ b/gdb/utils.c
@@ -2849,22 +2849,6 @@ gdb_realpath_tests ()
#endif /* GDB_SELF_TEST */
-ULONGEST
-align_up (ULONGEST v, int n)
-{
- /* Check that N is really a power of two. */
- gdb_assert (n && (n & (n-1)) == 0);
- return (v + n - 1) & -n;
-}
-
-ULONGEST
-align_down (ULONGEST v, int n)
-{
- /* Check that N is really a power of two. */
- gdb_assert (n && (n & (n-1)) == 0);
- return (v & -n);
-}
-
/* Allocation function for the libiberty hash table which uses an
obstack. The obstack is passed as DATA. */
diff --git a/gdb/utils.h b/gdb/utils.h
index 4dec889d83..c728449429 100644
--- a/gdb/utils.h
+++ b/gdb/utils.h
@@ -494,38 +494,6 @@ extern pid_t wait_to_die_with_timeout (pid_t pid, int *status, int timeout);
extern int myread (int, char *, int);
-/* Ensure that V is aligned to an N byte boundary (B's assumed to be a
- power of 2). Round up/down when necessary. Examples of correct
- use include:
-
- addr = align_up (addr, 8); -- VALUE needs 8 byte alignment
- write_memory (addr, value, len);
- addr += len;
-
- and:
-
- sp = align_down (sp - len, 16); -- Keep SP 16 byte aligned
- write_memory (sp, value, len);
-
- Note that uses such as:
-
- write_memory (addr, value, len);
- addr += align_up (len, 8);
-
- and:
-
- sp -= align_up (len, 8);
- write_memory (sp, value, len);
-
- are typically not correct as they don't ensure that the address (SP
- or ADDR) is correctly aligned (relying on previous alignment to
- keep things right). This is also why the methods are called
- "align_..." instead of "round_..." as the latter reads better with
- this incorrect coding style. */
-
-extern ULONGEST align_up (ULONGEST v, int n);
-extern ULONGEST align_down (ULONGEST v, int n);
-
/* Resource limits used by getrlimit and setrlimit. */
enum resource_limit_kind