This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
Re: [PATCH] gdb: Add support for dumping to verilog hex format.
- From: Andrew Burgess <andrew dot burgess at embecosm dot com>
- To: Pedro Alves <palves at redhat dot com>
- Cc: gdb-patches at sourceware dot org, Eli Zaretskii <eliz at gnu dot org>
- Date: Thu, 23 Apr 2015 22:31:30 +0100
- Subject: Re: [PATCH] gdb: Add support for dumping to verilog hex format.
- Authentication-results: sourceware.org; auth=none
- References: <ac8db75957e27b34d78e2f0b692b5072a9809a37 dot 1429740646 dot git dot andrew dot burgess at embecosm dot com> <553821B2 dot 1080704 at redhat dot com> <20150422230431 dot GF2422 at embecosm dot com> <5538CC57 dot 6030305 at redhat dot com>
* Pedro Alves <palves@redhat.com> [2015-04-23 11:41:27 +0100]:
>
> Thanks, this looks good to me with the missing _() Eli noticed, and ...
>
> ... at least this bit needs updating too:
>
> You can use the commands @code{dump}, @code{append}, and
> @code{restore} to copy data between target memory and a file. The
<snip>
New version includes string internationalisation change, and
additional doc changes.
Thanks,
Andrew
---
Extend the gdb 'dump' command to allow creating output in verilog hex
format. Add some tests to cover new functionality. As bfd does not
currently support reading in verilog hex formats the tests only cover
the 'dump' command, not the 'restore' command.
gdb/ChangeLog:
* cli/cli-dump.c (verilog_cmdlist): New variable.
(dump_verilog_memory): New function.
(dump_verilog_value): New function.
(verilog_dump_command): New function.
(_initialize_cli_dump): Add new commands to support verilog dump
format.
* NEWS: Add entry for "dump verilog".
gdb/doc/ChangeLog:
* gdb.texinfo (Dump/Restore Files): Add detail about verilog dump
format.
gdb/testsuite/ChangeLog:
* gdb.base/dump.exp: Add *.verilog files to all_files list. Add
new tests for verilog output.
---
gdb/ChangeLog | 10 ++++++++++
gdb/NEWS | 2 ++
gdb/cli/cli-dump.c | 38 ++++++++++++++++++++++++++++++++++++++
gdb/doc/ChangeLog | 5 +++++
gdb/doc/gdb.texinfo | 8 +++++---
gdb/testsuite/ChangeLog | 5 +++++
gdb/testsuite/gdb.base/dump.exp | 24 ++++++++++++++++++++----
7 files changed, 85 insertions(+), 7 deletions(-)
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index f5ea395..410f1b7 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,13 @@
+2015-04-22 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ * cli/cli-dump.c (verilog_cmdlist): New variable.
+ (dump_verilog_memory): New function.
+ (dump_verilog_value): New function.
+ (verilog_dump_command): New function.
+ (_initialize_cli_dump): Add new commands to support verilog dump
+ format.
+ * NEWS: Add entry for "dump verilog".
+
2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
* windows-nat.c (handle_output_debug_string): Don't change
diff --git a/gdb/NEWS b/gdb/NEWS
index 62cbdcb..6ad68ac 100644
--- a/gdb/NEWS
+++ b/gdb/NEWS
@@ -42,6 +42,8 @@
(no "set sysroot" or "file" commands are required). See "New remote
packets" below.
+* The "dump" command now supports verilog hex format.
+
* Python Scripting
** gdb.Objfile objects have a new attribute "username",
diff --git a/gdb/cli/cli-dump.c b/gdb/cli/cli-dump.c
index 0f9485f..08ff941 100644
--- a/gdb/cli/cli-dump.c
+++ b/gdb/cli/cli-dump.c
@@ -150,6 +150,7 @@ static struct cmd_list_element *dump_cmdlist;
static struct cmd_list_element *append_cmdlist;
static struct cmd_list_element *srec_cmdlist;
static struct cmd_list_element *ihex_cmdlist;
+static struct cmd_list_element *verilog_cmdlist;
static struct cmd_list_element *tekhex_cmdlist;
static struct cmd_list_element *binary_dump_cmdlist;
static struct cmd_list_element *binary_append_cmdlist;
@@ -335,6 +336,18 @@ dump_ihex_value (char *args, int from_tty)
}
static void
+dump_verilog_memory (char *args, int from_tty)
+{
+ dump_memory_to_file (args, FOPEN_WB, "verilog");
+}
+
+static void
+dump_verilog_value (char *args, int from_tty)
+{
+ dump_value_to_file (args, FOPEN_WB, "verilog");
+}
+
+static void
dump_tekhex_memory (char *args, int from_tty)
{
dump_memory_to_file (args, FOPEN_WB, "tekhex");
@@ -636,6 +649,13 @@ ihex_dump_command (char *cmd, int from_tty)
}
static void
+verilog_dump_command (char *cmd, int from_tty)
+{
+ printf_unfiltered (_("\"dump verilog\" must be followed by a subcommand.\n"));
+ help_list (verilog_cmdlist, "dump verilog ", all_commands, gdb_stdout);
+}
+
+static void
tekhex_dump_command (char *cmd, int from_tty)
{
printf_unfiltered ("\"dump tekhex\" must be followed by a subcommand.\n");
@@ -697,6 +717,12 @@ the specified FILE in raw target ordered bytes.");
0 /*allow-unknown*/,
&dump_cmdlist);
+ add_prefix_cmd ("verilog", all_commands, verilog_dump_command,
+ _("Write target code/data to a verilog hex file."),
+ &verilog_cmdlist, "dump verilog ",
+ 0 /*allow-unknown*/,
+ &dump_cmdlist);
+
add_prefix_cmd ("tekhex", all_commands, tekhex_dump_command,
_("Write target code/data to a tekhex file."),
&tekhex_cmdlist, "dump tekhex ",
@@ -739,6 +765,18 @@ Arguments are FILE EXPRESSION. Writes the value of EXPRESSION\n\
to the specified FILE in intel hex format."),
&ihex_cmdlist);
+ add_cmd ("memory", all_commands, dump_verilog_memory, _("\
+Write contents of memory to a verilog hex file.\n\
+Arguments are FILE START STOP. Writes the contents of memory within\n\
+the range [START .. STOP) to the specified FILE in verilog hex format."),
+ &verilog_cmdlist);
+
+ add_cmd ("value", all_commands, dump_verilog_value, _("\
+Write the value of an expression to a verilog hex file.\n\
+Arguments are FILE EXPRESSION. Writes the value of EXPRESSION\n\
+to the specified FILE in verilog hex format."),
+ &verilog_cmdlist);
+
add_cmd ("memory", all_commands, dump_tekhex_memory, _("\
Write contents of memory to a tekhex file.\n\
Arguments are FILE START STOP. Writes the contents of memory\n\
diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog
index 2335bc1..aa93751 100644
--- a/gdb/doc/ChangeLog
+++ b/gdb/doc/ChangeLog
@@ -1,3 +1,8 @@
+2015-04-22 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ * gdb.texinfo (Dump/Restore Files): Add detail about verilog dump
+ format.
+
2015-04-17 Gary Benson <gbenson@redhat.com>
* gdb.texinfo (Connecting to a Remote Target): Mention that
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index 0410702..9e2787d 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -10868,9 +10868,9 @@ You can use the commands @code{dump}, @code{append}, and
@code{restore} to copy data between target memory and a file. The
@code{dump} and @code{append} commands write data to a file, and the
@code{restore} command reads data from a file back into the inferior's
-memory. Files may be in binary, Motorola S-record, Intel hex, or
-Tektronix Hex format; however, @value{GDBN} can only append to binary
-files.
+memory. Files may be in binary, Motorola S-record, Intel hex,
+Tektronix Hex, or Verilog Hex format; however, @value{GDBN} can only
+append to binary files, and cannot read from Verilog Hex files.
@table @code
@@ -10890,6 +10890,8 @@ Intel hex format.
Motorola S-record format.
@item tekhex
Tektronix Hex format.
+@item verilog
+Verilog Hex format.
@end table
@value{GDBN} uses the same definitions of these formats as the
diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index 04ec209..8c26ed6 100644
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,3 +1,8 @@
+2015-04-22 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ * gdb.base/dump.exp: Add *.verilog files to all_files list. Add
+ new tests for verilog output.
+
2015-04-21 Pierre Muller <muller@sourceware.org>
PR pascal/17815
diff --git a/gdb/testsuite/gdb.base/dump.exp b/gdb/testsuite/gdb.base/dump.exp
index 9685549..21aca35 100644
--- a/gdb/testsuite/gdb.base/dump.exp
+++ b/gdb/testsuite/gdb.base/dump.exp
@@ -66,10 +66,14 @@ if {${data_address} > ${max_32bit_address}} then {
set filenames {}
set all_files {
intarr1.bin intarr1b.bin intarr1.ihex
- intarr1.srec intarr1.tekhex intarr2.bin intarr2b.bin intarr2.ihex
- intarr2.srec intarr2.tekhex intstr1.bin intstr1b.bin intstr1.ihex
- intstr1.srec intstr1.tekhex intstr2.bin intstr2b.bin intstr2.ihex
- intstr2.srec intstr2.tekhex intarr3.srec
+ intarr1.srec intarr1.tekhex intarr1.verilog
+ intarr2.bin intarr2b.bin intarr2.ihex
+ intarr2.srec intarr2.tekhex intarr2.verilog
+ intstr1.bin intstr1b.bin intstr1.ihex
+ intstr1.srec intstr1.tekhex intstr1.verilog
+ intstr2.bin intstr2b.bin intstr2.ihex
+ intstr2.srec intstr2.tekhex intstr2.verilog
+ intarr3.srec
}
# This loop sets variables dynamically -- each name listed in
@@ -147,6 +151,12 @@ make_dump_file "dump tekhex val [set intarr1.tekhex] intarray" \
make_dump_file "dump tekhex val [set intstr1.tekhex] intstruct" \
"dump struct as value, tekhex"
+make_dump_file "dump verilog val [set intarr1.verilog] intarray" \
+ "dump array as value, intel hex"
+
+make_dump_file "dump verilog val [set intstr1.verilog] intstruct" \
+ "dump struct as value, intel hex"
+
proc capture_value { expression args } {
global gdb_prompt
global expect_out
@@ -242,6 +252,12 @@ make_dump_file "dump tekhex mem [set intarr2.tekhex] $array_start $array_end" \
make_dump_file "dump tekhex mem [set intstr2.tekhex] $struct_start $struct_end" \
"dump struct as memory, tekhex"
+make_dump_file "dump verilog mem [set intarr2.verilog] $array_start $array_end" \
+ "dump array as memory, verilog"
+
+make_dump_file "dump verilog mem [set intstr2.verilog] $struct_start $struct_end" \
+ "dump struct as memory, verilog"
+
# test complex expressions
make_dump_file \
"dump srec mem [set intarr3.srec] &intarray \(char *\) &intarray + sizeof intarray" \
--
2.2.2