This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[RFA] Add --with-libz-prefix option in config/zlib.m4
- From: Joel Brobecker <brobecker at adacore dot com>
- To: gcc-patches at gcc dot gnu dot org
- Cc: binutils at sourceware dot org, gdb-patches at sourceware dot org
- Date: Wed, 7 Jan 2015 18:45:48 +0400
- Subject: [RFA] Add --with-libz-prefix option in config/zlib.m4
- Authentication-results: sourceware.org; auth=none
Hello,
This patch enhances config/zlib.m4 to introduce an extra option
--with-libz-prefix which allows us to provide the location of
the zlib library we want to use during the build.
config/ChangeLog:
* zlib.m4 (AM_ZLIB): Add --with-libz-prefix option support.
I didn't see any file in the GCC project that uses this macro,
so for the GCC repository, the change to zlib.m4 is it. But
I am also attaching to this email a copy of the patch that
will be applied to the binutils-gdb.git repository, with all
configury using this macro being re-generated - mostly for info,
also as a heads-up to both binutils and GDB.
This was tested by regenerating all autoconf/automake files in
the binutils-gdb project, and rebuilding GDB, using the following
combinations:
--with-zlib (system zlib used)
--with-libz-prefix=/zlib/prefix (specific zlib linked in)
--with-zlib --with-libz-prefix=/zlib/prefix (specific zlib linked in)
--without-zlib (zlib support turned off)
--without-zlib --with-zlib-prefix (zlib support turned off)
--with-zlib (no system zlib available, configure fails with expected error)
--with-zlib --with-libz-prefix=/invalid/zlib/prefix
(no system zlib, configure fails with same error)
OK to commit?
Thank you!
--
Joel
---
config/zlib.m4 | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/config/zlib.m4 b/config/zlib.m4
index b017499..1581124 100644
--- a/config/zlib.m4
+++ b/config/zlib.m4
@@ -9,8 +9,15 @@ AC_DEFUN([AM_ZLIB],
[], [with_zlib=auto])
if test "$with_zlib" != "no"; then
- AC_SEARCH_LIBS(zlibVersion, z, [AC_CHECK_HEADERS(zlib.h)])
- if test "$with_zlib" = "yes" -a "$ac_cv_header_zlib_h" != "yes"; then
+ AC_LIB_HAVE_LINKFLAGS([z], [], [#include "zlib.h";],
+ [int ret = deflateInit(NULL, 1);])
+ if test "$HAVE_LIBZ" = "yes"; then
+ # Make sure HAVE_ZLIB_H gets defined. Some code uses that over
+ # HAVE_LIBZ, since initially we were only defining HAVE_ZLIB_H.
+ AC_CHECK_HEADERS(zlib.h)
+ LIBS="$LIBS $LIBZ"
+ fi
+ if test "$with_zlib" = "yes" -a "$HAVE_LIBZ" != "yes"; then
AC_MSG_ERROR([zlib (libz) library was explicitly requested but not found])
fi
fi
--
1.9.1
>From 9dfb8ddb97c6dc56a5e1482e7029120d07dc07c8 Mon Sep 17 00:00:00 2001
From: Joel Brobecker <brobecker@adacore.com>
Date: Wed, 7 Jan 2015 14:47:51 +0400
Subject: [PATCH] config/zlib.m4: Add support for --with-libz-prefix
This patch enhances config/zlib.m4 to introduce an extra option
--with-libz-prefix which allows us to provide the location of
the zlib library we want to use during the build.
config/ChangeLog:
* zlib.m4 (AM_ZLIB): Add --with-libz-prefix option support.
bfd/ChangeLog:
* Makefile.in, aclocal.m4, config.in, configure: Regenerate.
bfd/doc/ChangeLog:
* doc/Makefile.in: Regenerate.
binutils/ChangeLog:
* Makefile.in, config.in, configure: Regenerate.
binutils/doc/ChangeLog:
* Makefile.in: Regenerate.
gas/ChangeLog:
* Makefile.in, aclocal.m4, config.in, configure, doc/Makefile.in:
Regenerate.
gdb/ChangeLog:
* config.in, configure: Regenerate.
gold/ChangeLog:
* Makefile.in, aclocal.m4, config.in, configure,
testsuite/Makefile.in: Regenerate.
ld/ChangeLog:
* Makefile.in, aclocal.m4, config.in, configure: Regenerate.
sim/common/ChangeLog:
* acinclude.m4, config.in, configure: Regenerate.
sim/ppc/ChangeLog:
* config.in, configure: Regenerate.
This was tested by regenerating all autoconf/automake files in
the binutils-gdb project, and rebuilding GDB, using the following
combinations:
--with-zlib (system zlib used)
--with-libz-prefix=/zlib/prefix (specific zlib linked in)
--with-zlib --with-libz-prefix=/zlib/prefix (specific zlib linked in)
--without-zlib (zlib support turned off)
--without-zlib --with-zlib-prefix (zlib support turned off)
--with-zlib (no system zlib available, configure fails with expected error)
--with-zlib --with-libz-prefix=/invalid/zlib/prefix
(no system zlib, configure fails with same error)
---
bfd/Makefile.in | 6 +
bfd/aclocal.m4 | 3 +
bfd/config.in | 3 +
bfd/configure | 669 +++++++++++++++++++++++++++---
bfd/doc/Makefile.in | 6 +
binutils/Makefile.in | 3 +
binutils/config.in | 3 +
binutils/configure | 652 ++++++++++++++++++++++++------
binutils/doc/Makefile.in | 3 +
config/zlib.m4 | 11 +-
gas/Makefile.in | 6 +
gas/aclocal.m4 | 3 +
gas/config.in | 3 +
gas/configure | 669 +++++++++++++++++++++++++++---
gas/doc/Makefile.in | 6 +
gdb/config.in | 3 +
gdb/configure | 986 ++++++++++++++++++++++++++++++++-------------
gold/Makefile.in | 6 +
gold/aclocal.m4 | 3 +
gold/config.in | 3 +
gold/configure | 666 ++++++++++++++++++++++++++++--
gold/testsuite/Makefile.in | 6 +
ld/Makefile.in | 6 +
ld/aclocal.m4 | 3 +
ld/config.in | 3 +
ld/configure | 669 +++++++++++++++++++++++++++---
sim/common/acinclude.m4 | 3 +
sim/common/config.in | 3 +
sim/common/configure | 671 +++++++++++++++++++++++++++---
sim/ppc/config.in | 3 +
sim/ppc/configure | 697 ++++++++++++++++++++++++++++++--
31 files changed, 5107 insertions(+), 670 deletions(-)
diff --git a/bfd/Makefile.in b/bfd/Makefile.in
index 2c9435c..934d62a 100644
--- a/bfd/Makefile.in
+++ b/bfd/Makefile.in
@@ -70,6 +70,9 @@ am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
$(top_srcdir)/../config/gettext-sister.m4 \
$(top_srcdir)/../config/largefile.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
+ $(top_srcdir)/../config/lib-ld.m4 \
+ $(top_srcdir)/../config/lib-link.m4 \
+ $(top_srcdir)/../config/lib-prefix.m4 \
$(top_srcdir)/../config/nls.m4 \
$(top_srcdir)/../config/override.m4 \
$(top_srcdir)/../config/plugins.m4 \
@@ -204,6 +207,7 @@ FGREP = @FGREP@
GENCAT = @GENCAT@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
+HAVE_LIBZ = @HAVE_LIBZ@
HDEFINES = @HDEFINES@
INCINTL = @INCINTL@
INSTALL = @INSTALL@
@@ -220,9 +224,11 @@ LIBM = @LIBM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIBZ = @LIBZ@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LTLIBZ = @LTLIBZ@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
diff --git a/bfd/aclocal.m4 b/bfd/aclocal.m4
index d9e743e..358fe09 100644
--- a/bfd/aclocal.m4
+++ b/bfd/aclocal.m4
@@ -973,6 +973,9 @@ m4_include([../config/depstand.m4])
m4_include([../config/gettext-sister.m4])
m4_include([../config/largefile.m4])
m4_include([../config/lead-dot.m4])
+m4_include([../config/lib-ld.m4])
+m4_include([../config/lib-link.m4])
+m4_include([../config/lib-prefix.m4])
m4_include([../config/nls.m4])
m4_include([../config/override.m4])
m4_include([../config/plugins.m4])
diff --git a/bfd/config.in b/bfd/config.in
index b911bf6..cf1a97a 100644
--- a/bfd/config.in
+++ b/bfd/config.in
@@ -125,6 +125,9 @@
/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H
+/* Define if you have the z library. */
+#undef HAVE_LIBZ
+
/* Define if <sys/procfs.h> has lwpstatus_t. */
#undef HAVE_LWPSTATUS_T
diff --git a/bfd/configure b/bfd/configure
index f7a9e81..8c92742 100755
--- a/bfd/configure
+++ b/bfd/configure
@@ -620,6 +620,9 @@ SHARED_LDFLAGS
LIBM
COREFLAG
COREFILE
+LTLIBZ
+LIBZ
+HAVE_LIBZ
EXEEXT_FOR_BUILD
CC_FOR_BUILD
BFD_HOSTPTR_T
@@ -798,6 +801,8 @@ enable_maintainer_mode
enable_install_libbfd
enable_nls
with_zlib
+enable_rpath
+with_libz_prefix
'
ac_precious_vars='build_alias
host_alias
@@ -1449,6 +1454,7 @@ Optional Features:
(and sometimes confusing) to the casual installer
--enable-install-libbfd controls installation of libbfd and related headers
--disable-nls do not use Native Language Support
+ --disable-rpath do not hardcode runtime library paths
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
@@ -1464,6 +1470,9 @@ Optional Packages:
Binutils"
--with-bugurl=URL Direct users to URL to report a bug
--with-zlib include zlib support (auto/yes/no) default=auto
+ --with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-libz-prefix[=DIR] search for libz in DIR/include and DIR/lib
+ --without-libz-prefix don't search for libz in includedir and libdir
Some influential environment variables:
CC C compiler command
@@ -11421,7 +11430,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11424 "configure"
+#line 11433 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -11527,7 +11536,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11530 "configure"
+#line 11539 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13854,6 +13863,164 @@ _ACEOF
# Link in zlib if we can. This allows us to read compressed debug sections.
# This is used only by compress.c.
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
+$as_echo_n "checking for ld used by GCC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test "${acl_cv_path_LD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${acl_cv_prog_gnu_ld+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ acl_cv_prog_gnu_ld=yes
+else
+ acl_cv_prog_gnu_ld=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if test "${acl_cv_rpath+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+ enableval=$enable_rpath; :
+else
+ enable_rpath=yes
+fi
+
+
+
# See if the user specified whether he wants zlib support or not.
# Check whether --with-zlib was given.
@@ -13865,60 +14032,472 @@ fi
if test "$with_zlib" != "no"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing zlibVersion" >&5
-$as_echo_n "checking for library containing zlibVersion... " >&6; }
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
+
+
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libz-prefix was given.
+if test "${with_libz_prefix+set}" = set; then :
+ withval=$with_libz_prefix;
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+
+fi
+
+ LIBZ=
+ LTLIBZ=
+ INCZ=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='z '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBZ="${LIBZ}${LIBZ:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBZ="${LTLIBZ}${LTLIBZ:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBZ="${LIBZ}${LIBZ:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_a"
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCZ="${INCZ}${INCZ:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBZ="${LIBZ}${LIBZ:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBZ="${LIBZ}${LIBZ:+ }$dep"
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-l$name"
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBZ="${LIBZ}${LIBZ:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBZ="${LIBZ}${LIBZ:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-R$found_dir"
+ done
+ fi
+
+
+ ac_save_CPPFLAGS="$CPPFLAGS"
+
+ for element in $INCZ; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libz" >&5
+$as_echo_n "checking for libz... " >&6; }
+if test "${ac_cv_libz+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char zlibVersion ();
+ ac_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBZ"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include "zlib.h";
int
main ()
{
-return zlibVersion ();
+int ret = deflateInit(NULL, 1);
;
return 0;
}
_ACEOF
-for ac_lib in '' z; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_zlibVersion=$ac_res
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_libz=yes
+else
+ ac_cv_libz=no
fi
rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_zlibVersion+set}" = set; then :
- break
-fi
-done
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$ac_save_LIBS"
-else
- ac_cv_search_zlibVersion=no
fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_zlibVersion" >&5
-$as_echo "$ac_cv_search_zlibVersion" >&6; }
-ac_res=$ac_cv_search_zlibVersion
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
- for ac_header in zlib.h
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_libz" >&5
+$as_echo "$ac_cv_libz" >&6; }
+ if test "$ac_cv_libz" = yes; then
+ HAVE_LIBZ=yes
+
+$as_echo "#define HAVE_LIBZ 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libz" >&5
+$as_echo_n "checking how to link with libz... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBZ" >&5
+$as_echo "$LIBZ" >&6; }
+ else
+ HAVE_LIBZ=no
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIBZ=
+ LTLIBZ=
+ fi
+
+
+
+
+
+
+ if test "$HAVE_LIBZ" = "yes"; then
+ # Make sure HAVE_ZLIB_H gets defined. Some code uses that over
+ # HAVE_LIBZ, since initially we were only defining HAVE_ZLIB_H.
+ for ac_header in zlib.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
if test "x$ac_cv_header_zlib_h" = x""yes; then :
@@ -13930,9 +14509,9 @@ fi
done
-fi
-
- if test "$with_zlib" = "yes" -a "$ac_cv_header_zlib_h" != "yes"; then
+ LIBS="$LIBS $LIBZ"
+ fi
+ if test "$with_zlib" = "yes" -a "$HAVE_LIBZ" != "yes"; then
as_fn_error "zlib (libz) library was explicitly requested but not found" "$LINENO" 5
fi
fi
diff --git a/bfd/doc/Makefile.in b/bfd/doc/Makefile.in
index 3be6a5e..7257ed9 100644
--- a/bfd/doc/Makefile.in
+++ b/bfd/doc/Makefile.in
@@ -66,6 +66,9 @@ am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
$(top_srcdir)/../config/gettext-sister.m4 \
$(top_srcdir)/../config/largefile.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
+ $(top_srcdir)/../config/lib-ld.m4 \
+ $(top_srcdir)/../config/lib-link.m4 \
+ $(top_srcdir)/../config/lib-prefix.m4 \
$(top_srcdir)/../config/nls.m4 \
$(top_srcdir)/../config/override.m4 \
$(top_srcdir)/../config/plugins.m4 \
@@ -164,6 +167,7 @@ FGREP = @FGREP@
GENCAT = @GENCAT@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
+HAVE_LIBZ = @HAVE_LIBZ@
HDEFINES = @HDEFINES@
INCINTL = @INCINTL@
INSTALL = @INSTALL@
@@ -180,9 +184,11 @@ LIBM = @LIBM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIBZ = @LIBZ@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LTLIBZ = @LTLIBZ@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
diff --git a/binutils/Makefile.in b/binutils/Makefile.in
index aaf4d51..05fb968 100644
--- a/binutils/Makefile.in
+++ b/binutils/Makefile.in
@@ -316,6 +316,7 @@ FGREP = @FGREP@
GENCAT = @GENCAT@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
+HAVE_LIBZ = @HAVE_LIBZ@
HDEFINES = @HDEFINES@
INCINTL = @INCINTL@
INSTALL = @INSTALL@
@@ -335,10 +336,12 @@ LIBINTL_DEP = @LIBINTL_DEP@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIBZ = @LIBZ@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBOBJS = @LTLIBOBJS@
+LTLIBZ = @LTLIBZ@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
diff --git a/binutils/config.in b/binutils/config.in
index a0ed034..dd7d832 100644
--- a/binutils/config.in
+++ b/binutils/config.in
@@ -102,6 +102,9 @@
/* Define if your <locale.h> file defines LC_MESSAGES. */
#undef HAVE_LC_MESSAGES
+/* Define if you have the z library. */
+#undef HAVE_LIBZ
+
/* Define to 1 if you have the <limits.h> header file. */
#undef HAVE_LIMITS_H
diff --git a/binutils/configure b/binutils/configure
index b960c19..8280dd8 100755
--- a/binutils/configure
+++ b/binutils/configure
@@ -618,6 +618,9 @@ BUILD_NLMCONV
NLMCONV_DEFS
LTLIBICONV
LIBICONV
+LTLIBZ
+LIBZ
+HAVE_LIBZ
ALLOCA
DEMANGLER_NAME
EXEEXT_FOR_BUILD
@@ -779,6 +782,7 @@ enable_nls
enable_maintainer_mode
with_zlib
enable_rpath
+with_libz_prefix
with_libiconv_prefix
'
ac_precious_vars='build_alias
@@ -1441,6 +1445,8 @@ Optional Packages:
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-zlib include zlib support (auto/yes/no) default=auto
--with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-libz-prefix[=DIR] search for libz in DIR/include and DIR/lib
+ --without-libz-prefix don't search for libz in includedir and libdir
--with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
--without-libiconv-prefix don't search for libiconv in includedir and libdir
@@ -11219,7 +11225,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11222 "configure"
+#line 11228 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -11325,7 +11331,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11328 "configure"
+#line 11334 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13540,121 +13546,6 @@ _ACEOF
# sections. This is used only by readelf.c (objdump uses bfd for
# reading compressed sections).
- # See if the user specified whether he wants zlib support or not.
-
-# Check whether --with-zlib was given.
-if test "${with_zlib+set}" = set; then :
- withval=$with_zlib;
-else
- with_zlib=auto
-fi
-
-
- if test "$with_zlib" != "no"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing zlibVersion" >&5
-$as_echo_n "checking for library containing zlibVersion... " >&6; }
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char zlibVersion ();
-int
-main ()
-{
-return zlibVersion ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' z; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_zlibVersion=$ac_res
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_zlibVersion+set}" = set; then :
- break
-fi
-done
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
-
-else
- ac_cv_search_zlibVersion=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_zlibVersion" >&5
-$as_echo "$ac_cv_search_zlibVersion" >&6; }
-ac_res=$ac_cv_search_zlibVersion
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
- for ac_header in zlib.h
-do :
- ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
-if test "x$ac_cv_header_zlib_h" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_ZLIB_H 1
-_ACEOF
-
-fi
-
-done
-
-fi
-
- if test "$with_zlib" = "yes" -a "$ac_cv_header_zlib_h" != "yes"; then
- as_fn_error "zlib (libz) library was explicitly requested but not found" "$LINENO" 5
- fi
- fi
-
-
-
-case "${host}" in
-*-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-cygwin* | *-*-windows*)
-
-$as_echo "#define USE_BINARY_FOPEN 1" >>confdefs.h
- ;;
-esac
-
-# target-specific stuff:
-
-# Canonicalize the secondary target names.
-if test -n "$enable_targets"; then
- for targ in `echo $enable_targets | sed 's/,/ /g'`
- do
- result=`$ac_config_sub $targ 2>/dev/null`
- if test -n "$result"; then
- canon_targets="$canon_targets $result"
- else
- # Allow targets that config.sub doesn't recognize, like "all".
- canon_targets="$canon_targets $targ"
- fi
- done
-fi
-
-ac_fn_c_check_header_mongrel "$LINENO" "iconv.h" "ac_cv_header_iconv_h" "$ac_includes_default"
-if test "x$ac_cv_header_iconv_h" = x""yes; then :
-
-fi
-
-
-
if test "X$prefix" = "XNONE"; then
acl_final_prefix="$ac_default_prefix"
else
@@ -13813,6 +13704,533 @@ fi
+ # See if the user specified whether he wants zlib support or not.
+
+# Check whether --with-zlib was given.
+if test "${with_zlib+set}" = set; then :
+ withval=$with_zlib;
+else
+ with_zlib=auto
+fi
+
+
+ if test "$with_zlib" != "no"; then
+
+
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libz-prefix was given.
+if test "${with_libz_prefix+set}" = set; then :
+ withval=$with_libz_prefix;
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+
+fi
+
+ LIBZ=
+ LTLIBZ=
+ INCZ=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='z '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBZ="${LIBZ}${LIBZ:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBZ="${LTLIBZ}${LTLIBZ:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBZ="${LIBZ}${LIBZ:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_a"
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCZ="${INCZ}${INCZ:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBZ="${LIBZ}${LIBZ:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBZ="${LIBZ}${LIBZ:+ }$dep"
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-l$name"
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBZ="${LIBZ}${LIBZ:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBZ="${LIBZ}${LIBZ:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-R$found_dir"
+ done
+ fi
+
+
+ ac_save_CPPFLAGS="$CPPFLAGS"
+
+ for element in $INCZ; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libz" >&5
+$as_echo_n "checking for libz... " >&6; }
+if test "${ac_cv_libz+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ ac_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBZ"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include "zlib.h";
+int
+main ()
+{
+int ret = deflateInit(NULL, 1);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_libz=yes
+else
+ ac_cv_libz=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$ac_save_LIBS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_libz" >&5
+$as_echo "$ac_cv_libz" >&6; }
+ if test "$ac_cv_libz" = yes; then
+ HAVE_LIBZ=yes
+
+$as_echo "#define HAVE_LIBZ 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libz" >&5
+$as_echo_n "checking how to link with libz... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBZ" >&5
+$as_echo "$LIBZ" >&6; }
+ else
+ HAVE_LIBZ=no
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIBZ=
+ LTLIBZ=
+ fi
+
+
+
+
+
+
+ if test "$HAVE_LIBZ" = "yes"; then
+ # Make sure HAVE_ZLIB_H gets defined. Some code uses that over
+ # HAVE_LIBZ, since initially we were only defining HAVE_ZLIB_H.
+ for ac_header in zlib.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
+if test "x$ac_cv_header_zlib_h" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_ZLIB_H 1
+_ACEOF
+
+fi
+
+done
+
+ LIBS="$LIBS $LIBZ"
+ fi
+ if test "$with_zlib" = "yes" -a "$HAVE_LIBZ" != "yes"; then
+ as_fn_error "zlib (libz) library was explicitly requested but not found" "$LINENO" 5
+ fi
+ fi
+
+
+
+case "${host}" in
+*-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-cygwin* | *-*-windows*)
+
+$as_echo "#define USE_BINARY_FOPEN 1" >>confdefs.h
+ ;;
+esac
+
+# target-specific stuff:
+
+# Canonicalize the secondary target names.
+if test -n "$enable_targets"; then
+ for targ in `echo $enable_targets | sed 's/,/ /g'`
+ do
+ result=`$ac_config_sub $targ 2>/dev/null`
+ if test -n "$result"; then
+ canon_targets="$canon_targets $result"
+ else
+ # Allow targets that config.sub doesn't recognize, like "all".
+ canon_targets="$canon_targets $targ"
+ fi
+ done
+fi
+
+ac_fn_c_check_header_mongrel "$LINENO" "iconv.h" "ac_cv_header_iconv_h" "$ac_includes_default"
+if test "x$ac_cv_header_iconv_h" = x""yes; then :
+
+fi
+
+
+
diff --git a/binutils/doc/Makefile.in b/binutils/doc/Makefile.in
index c828aae..96657ed 100644
--- a/binutils/doc/Makefile.in
+++ b/binutils/doc/Makefile.in
@@ -166,6 +166,7 @@ FGREP = @FGREP@
GENCAT = @GENCAT@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
+HAVE_LIBZ = @HAVE_LIBZ@
HDEFINES = @HDEFINES@
INCINTL = @INCINTL@
INSTALL = @INSTALL@
@@ -185,10 +186,12 @@ LIBINTL_DEP = @LIBINTL_DEP@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIBZ = @LIBZ@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBOBJS = @LTLIBOBJS@
+LTLIBZ = @LTLIBZ@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
diff --git a/config/zlib.m4 b/config/zlib.m4
index b017499..1581124 100644
--- a/config/zlib.m4
+++ b/config/zlib.m4
@@ -9,8 +9,15 @@ AC_DEFUN([AM_ZLIB],
[], [with_zlib=auto])
if test "$with_zlib" != "no"; then
- AC_SEARCH_LIBS(zlibVersion, z, [AC_CHECK_HEADERS(zlib.h)])
- if test "$with_zlib" = "yes" -a "$ac_cv_header_zlib_h" != "yes"; then
+ AC_LIB_HAVE_LINKFLAGS([z], [], [#include "zlib.h";],
+ [int ret = deflateInit(NULL, 1);])
+ if test "$HAVE_LIBZ" = "yes"; then
+ # Make sure HAVE_ZLIB_H gets defined. Some code uses that over
+ # HAVE_LIBZ, since initially we were only defining HAVE_ZLIB_H.
+ AC_CHECK_HEADERS(zlib.h)
+ LIBS="$LIBS $LIBZ"
+ fi
+ if test "$with_zlib" = "yes" -a "$HAVE_LIBZ" != "yes"; then
AC_MSG_ERROR([zlib (libz) library was explicitly requested but not found])
fi
fi
diff --git a/gas/Makefile.in b/gas/Makefile.in
index f190714..dd21288 100644
--- a/gas/Makefile.in
+++ b/gas/Makefile.in
@@ -73,6 +73,9 @@ am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
$(top_srcdir)/../config/largefile.m4 \
$(top_srcdir)/../config/lcmessage.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
+ $(top_srcdir)/../config/lib-ld.m4 \
+ $(top_srcdir)/../config/lib-link.m4 \
+ $(top_srcdir)/../config/lib-prefix.m4 \
$(top_srcdir)/../config/nls.m4 \
$(top_srcdir)/../config/override.m4 \
$(top_srcdir)/../config/plugins.m4 \
@@ -181,6 +184,7 @@ GDBINIT = @GDBINIT@
GENCAT = @GENCAT@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
+HAVE_LIBZ = @HAVE_LIBZ@
INCINTL = @INCINTL@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
@@ -199,9 +203,11 @@ LIBM = @LIBM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIBZ = @LIBZ@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LTLIBZ = @LTLIBZ@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
diff --git a/gas/aclocal.m4 b/gas/aclocal.m4
index ea731ac..3d9deaf 100644
--- a/gas/aclocal.m4
+++ b/gas/aclocal.m4
@@ -997,6 +997,9 @@ m4_include([../config/gettext-sister.m4])
m4_include([../config/largefile.m4])
m4_include([../config/lcmessage.m4])
m4_include([../config/lead-dot.m4])
+m4_include([../config/lib-ld.m4])
+m4_include([../config/lib-link.m4])
+m4_include([../config/lib-prefix.m4])
m4_include([../config/nls.m4])
m4_include([../config/override.m4])
m4_include([../config/plugins.m4])
diff --git a/gas/config.in b/gas/config.in
index fef16ee..c326c74 100644
--- a/gas/config.in
+++ b/gas/config.in
@@ -100,6 +100,9 @@
/* Define if your <locale.h> file defines LC_MESSAGES. */
#undef HAVE_LC_MESSAGES
+/* Define if you have the z library. */
+#undef HAVE_LIBZ
+
/* Define to 1 if you have the <limits.h> header file. */
#undef HAVE_LIMITS_H
diff --git a/gas/configure b/gas/configure
index 75d8a52..7ebd36a 100755
--- a/gas/configure
+++ b/gas/configure
@@ -602,6 +602,9 @@ ac_subst_vars='am__EXEEXT_FALSE
am__EXEEXT_TRUE
LTLIBOBJS
LIBOBJS
+LTLIBZ
+LIBZ
+HAVE_LIBZ
LIBM
ALLOCA
GENINSRC_NEVER_FALSE
@@ -767,6 +770,8 @@ enable_build_warnings
enable_nls
enable_maintainer_mode
with_zlib
+enable_rpath
+with_libz_prefix
'
ac_precious_vars='build_alias
host_alias
@@ -1415,6 +1420,7 @@ Optional Features:
--disable-nls do not use Native Language Support
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
+ --disable-rpath do not hardcode runtime library paths
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
@@ -1423,6 +1429,9 @@ Optional Packages:
both]
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-zlib include zlib support (auto/yes/no) default=auto
+ --with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-libz-prefix[=DIR] search for libz in DIR/include and DIR/lib
+ --without-libz-prefix don't search for libz in includedir and libdir
Some influential environment variables:
CC C compiler command
@@ -10967,7 +10976,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10970 "configure"
+#line 10979 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -11073,7 +11082,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11076 "configure"
+#line 11085 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -14321,6 +14330,164 @@ esac
# Link in zlib if we can. This allows us to write compressed debug sections.
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
+$as_echo_n "checking for ld used by GCC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test "${acl_cv_path_LD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${acl_cv_prog_gnu_ld+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ acl_cv_prog_gnu_ld=yes
+else
+ acl_cv_prog_gnu_ld=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if test "${acl_cv_rpath+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+ enableval=$enable_rpath; :
+else
+ enable_rpath=yes
+fi
+
+
+
# See if the user specified whether he wants zlib support or not.
# Check whether --with-zlib was given.
@@ -14332,60 +14499,472 @@ fi
if test "$with_zlib" != "no"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing zlibVersion" >&5
-$as_echo_n "checking for library containing zlibVersion... " >&6; }
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
+
+
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libz-prefix was given.
+if test "${with_libz_prefix+set}" = set; then :
+ withval=$with_libz_prefix;
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+
+fi
+
+ LIBZ=
+ LTLIBZ=
+ INCZ=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='z '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBZ="${LIBZ}${LIBZ:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBZ="${LTLIBZ}${LTLIBZ:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBZ="${LIBZ}${LIBZ:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_a"
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCZ="${INCZ}${INCZ:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBZ="${LIBZ}${LIBZ:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBZ="${LIBZ}${LIBZ:+ }$dep"
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-l$name"
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBZ="${LIBZ}${LIBZ:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBZ="${LIBZ}${LIBZ:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-R$found_dir"
+ done
+ fi
+
+
+ ac_save_CPPFLAGS="$CPPFLAGS"
+
+ for element in $INCZ; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libz" >&5
+$as_echo_n "checking for libz... " >&6; }
+if test "${ac_cv_libz+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char zlibVersion ();
+ ac_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBZ"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include "zlib.h";
int
main ()
{
-return zlibVersion ();
+int ret = deflateInit(NULL, 1);
;
return 0;
}
_ACEOF
-for ac_lib in '' z; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_zlibVersion=$ac_res
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_libz=yes
+else
+ ac_cv_libz=no
fi
rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_zlibVersion+set}" = set; then :
- break
-fi
-done
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$ac_save_LIBS"
-else
- ac_cv_search_zlibVersion=no
fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_zlibVersion" >&5
-$as_echo "$ac_cv_search_zlibVersion" >&6; }
-ac_res=$ac_cv_search_zlibVersion
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
- for ac_header in zlib.h
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_libz" >&5
+$as_echo "$ac_cv_libz" >&6; }
+ if test "$ac_cv_libz" = yes; then
+ HAVE_LIBZ=yes
+
+$as_echo "#define HAVE_LIBZ 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libz" >&5
+$as_echo_n "checking how to link with libz... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBZ" >&5
+$as_echo "$LIBZ" >&6; }
+ else
+ HAVE_LIBZ=no
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIBZ=
+ LTLIBZ=
+ fi
+
+
+
+
+
+
+ if test "$HAVE_LIBZ" = "yes"; then
+ # Make sure HAVE_ZLIB_H gets defined. Some code uses that over
+ # HAVE_LIBZ, since initially we were only defining HAVE_ZLIB_H.
+ for ac_header in zlib.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
if test "x$ac_cv_header_zlib_h" = x""yes; then :
@@ -14397,9 +14976,9 @@ fi
done
-fi
-
- if test "$with_zlib" = "yes" -a "$ac_cv_header_zlib_h" != "yes"; then
+ LIBS="$LIBS $LIBZ"
+ fi
+ if test "$with_zlib" = "yes" -a "$HAVE_LIBZ" != "yes"; then
as_fn_error "zlib (libz) library was explicitly requested but not found" "$LINENO" 5
fi
fi
diff --git a/gas/doc/Makefile.in b/gas/doc/Makefile.in
index 02841d9..86d5a5d 100644
--- a/gas/doc/Makefile.in
+++ b/gas/doc/Makefile.in
@@ -64,6 +64,9 @@ am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
$(top_srcdir)/../config/largefile.m4 \
$(top_srcdir)/../config/lcmessage.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
+ $(top_srcdir)/../config/lib-ld.m4 \
+ $(top_srcdir)/../config/lib-link.m4 \
+ $(top_srcdir)/../config/lib-prefix.m4 \
$(top_srcdir)/../config/nls.m4 \
$(top_srcdir)/../config/override.m4 \
$(top_srcdir)/../config/plugins.m4 \
@@ -150,6 +153,7 @@ GDBINIT = @GDBINIT@
GENCAT = @GENCAT@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
+HAVE_LIBZ = @HAVE_LIBZ@
INCINTL = @INCINTL@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
@@ -168,9 +172,11 @@ LIBM = @LIBM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIBZ = @LIBZ@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LTLIBZ = @LTLIBZ@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
diff --git a/gdb/config.in b/gdb/config.in
index 9d3f32d..9b04c29 100644
--- a/gdb/config.in
+++ b/gdb/config.in
@@ -213,6 +213,9 @@
/* Define to 1 if you have the `w' library (-lw). */
#undef HAVE_LIBW
+/* Define if you have the z library. */
+#undef HAVE_LIBZ
+
/* Define to 1 if you have the <linux/perf_event.h> header file. */
#undef HAVE_LINUX_PERF_EVENT_H
diff --git a/gdb/configure b/gdb/configure
index 7ff74ba..0ae5c79 100755
--- a/gdb/configure
+++ b/gdb/configure
@@ -680,6 +680,9 @@ READLINE_TEXI_INCFLAG
READLINE_CFLAGS
READLINE_DEPS
READLINE
+LTLIBZ
+LIBZ
+HAVE_LIBZ
MIG
WINDRES
DLLTOOL
@@ -813,13 +816,14 @@ enable_profiling
with_pkgversion
with_bugurl
with_zlib
+with_gnu_ld
+enable_rpath
+with_libz_prefix
with_libiconv_prefix
with_iconv_bin
with_system_readline
with_jit_reader_dir
with_expat
-with_gnu_ld
-enable_rpath
with_libexpat_prefix
with_python
with_guile
@@ -1528,6 +1532,9 @@ Optional Packages:
--with-pkgversion=PKG Use PKG in the version string in place of "GDB"
--with-bugurl=URL Direct users to URL to report a bug
--with-zlib include zlib support (auto/yes/no) default=auto
+ --with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-libz-prefix[=DIR] search for libz in DIR/include and DIR/lib
+ --without-libz-prefix don't search for libz in includedir and libdir
--with-libiconv-prefix=DIR
search for libiconv in DIR/include and DIR/lib
--with-iconv-bin=PATH specify where to find the iconv program
@@ -1535,7 +1542,6 @@ Optional Packages:
--with-jit-reader-dir=PATH
directory to load the JIT readers from
--with-expat include expat support (auto/yes/no)
- --with-gnu-ld assume the C compiler uses GNU ld default=no
--with-libexpat-prefix[=DIR] search for libexpat in DIR/include and DIR/lib
--without-libexpat-prefix don't search for libexpat in includedir and libdir
--with-python[=PYTHON] include python support
@@ -6682,163 +6688,733 @@ fi
# Link in zlib if we can. This allows us to read compressed debug sections.
- # See if the user specified whether he wants zlib support or not.
-
-# Check whether --with-zlib was given.
-if test "${with_zlib+set}" = set; then :
- withval=$with_zlib;
-else
- with_zlib=auto
-fi
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
- if test "$with_zlib" != "no"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing zlibVersion" >&5
-$as_echo_n "checking for library containing zlibVersion... " >&6; }
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
- $as_echo_n "(cached) " >&6
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
+ with_gnu_ld=no
+fi
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char zlibVersion ();
-int
-main ()
-{
-return zlibVersion ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' z; do
- if test -z "$ac_lib"; then
- ac_res="none required"
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ PATH_SEPARATOR=:
fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_zlibVersion=$ac_res
+ rm -f conf$$.sh
fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_zlibVersion+set}" = set; then :
- break
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
+$as_echo_n "checking for ld used by GCC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
fi
-done
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
-
+if test "${acl_cv_path_LD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
else
- ac_cv_search_zlibVersion=no
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_zlibVersion" >&5
-$as_echo "$ac_cv_search_zlibVersion" >&6; }
-ac_res=$ac_cv_search_zlibVersion
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
- for ac_header in zlib.h
-do :
- ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
-if test "x$ac_cv_header_zlib_h" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_ZLIB_H 1
-_ACEOF
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${acl_cv_prog_gnu_ld+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ acl_cv_prog_gnu_ld=yes
+else
+ acl_cv_prog_gnu_ld=no
fi
-
-done
-
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
- if test "$with_zlib" = "yes" -a "$ac_cv_header_zlib_h" != "yes"; then
- as_fn_error "zlib (libz) library was explicitly requested but not found" "$LINENO" 5
- fi
- fi
-# On HP/UX we may need libxpdl for dlgetmodinfo (used by solib-pa64.c).
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlgetmodinfo" >&5
-$as_echo_n "checking for library containing dlgetmodinfo... " >&6; }
-if test "${ac_cv_search_dlgetmodinfo+set}" = set; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if test "${acl_cv_rpath+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlgetmodinfo ();
-int
-main ()
-{
-return dlgetmodinfo ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' dl xpdl; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_dlgetmodinfo=$ac_res
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+
fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_dlgetmodinfo+set}" = set; then :
- break
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+ enableval=$enable_rpath; :
+else
+ enable_rpath=yes
fi
-done
-if test "${ac_cv_search_dlgetmodinfo+set}" = set; then :
+
+
+ # See if the user specified whether he wants zlib support or not.
+
+# Check whether --with-zlib was given.
+if test "${with_zlib+set}" = set; then :
+ withval=$with_zlib;
else
- ac_cv_search_dlgetmodinfo=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
+ with_zlib=auto
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlgetmodinfo" >&5
-$as_echo "$ac_cv_search_dlgetmodinfo" >&6; }
-ac_res=$ac_cv_search_dlgetmodinfo
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-fi
+ if test "$with_zlib" != "no"; then
-# Check whether --with-libiconv-prefix was given.
-if test "${with_libiconv_prefix+set}" = set; then :
- withval=$with_libiconv_prefix;
- for dir in `echo "$withval" | tr : ' '`; do
- if test -d $dir/include; then LIBICONV_INCLUDE="-I$dir/include"; fi
- if test -d $dir/lib; then LIBICONV_LIBDIR="-L$dir/lib"; fi
- done
-fi
- BUILD_LIBICONV_LIBDIRS="../libiconv/lib/.libs ../libiconv/lib/_libs"
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libz-prefix was given.
+if test "${with_libz_prefix+set}" = set; then :
+ withval=$with_libz_prefix;
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+
+fi
+
+ LIBZ=
+ LTLIBZ=
+ INCZ=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='z '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBZ="${LIBZ}${LIBZ:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBZ="${LTLIBZ}${LTLIBZ:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBZ="${LIBZ}${LIBZ:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_a"
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCZ="${INCZ}${INCZ:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBZ="${LIBZ}${LIBZ:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBZ="${LIBZ}${LIBZ:+ }$dep"
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-l$name"
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBZ="${LIBZ}${LIBZ:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBZ="${LIBZ}${LIBZ:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-R$found_dir"
+ done
+ fi
+
+
+ ac_save_CPPFLAGS="$CPPFLAGS"
+
+ for element in $INCZ; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libz" >&5
+$as_echo_n "checking for libz... " >&6; }
+if test "${ac_cv_libz+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ ac_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBZ"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include "zlib.h";
+int
+main ()
+{
+int ret = deflateInit(NULL, 1);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_libz=yes
+else
+ ac_cv_libz=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$ac_save_LIBS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_libz" >&5
+$as_echo "$ac_cv_libz" >&6; }
+ if test "$ac_cv_libz" = yes; then
+ HAVE_LIBZ=yes
+
+$as_echo "#define HAVE_LIBZ 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libz" >&5
+$as_echo_n "checking how to link with libz... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBZ" >&5
+$as_echo "$LIBZ" >&6; }
+ else
+ HAVE_LIBZ=no
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIBZ=
+ LTLIBZ=
+ fi
+
+
+
+
+
+
+ if test "$HAVE_LIBZ" = "yes"; then
+ # Make sure HAVE_ZLIB_H gets defined. Some code uses that over
+ # HAVE_LIBZ, since initially we were only defining HAVE_ZLIB_H.
+ for ac_header in zlib.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
+if test "x$ac_cv_header_zlib_h" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_ZLIB_H 1
+_ACEOF
+
+fi
+
+done
+
+ LIBS="$LIBS $LIBZ"
+ fi
+ if test "$with_zlib" = "yes" -a "$HAVE_LIBZ" != "yes"; then
+ as_fn_error "zlib (libz) library was explicitly requested but not found" "$LINENO" 5
+ fi
+ fi
+
+
+# On HP/UX we may need libxpdl for dlgetmodinfo (used by solib-pa64.c).
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlgetmodinfo" >&5
+$as_echo_n "checking for library containing dlgetmodinfo... " >&6; }
+if test "${ac_cv_search_dlgetmodinfo+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlgetmodinfo ();
+int
+main ()
+{
+return dlgetmodinfo ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' dl xpdl; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_search_dlgetmodinfo=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if test "${ac_cv_search_dlgetmodinfo+set}" = set; then :
+ break
+fi
+done
+if test "${ac_cv_search_dlgetmodinfo+set}" = set; then :
+
+else
+ ac_cv_search_dlgetmodinfo=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlgetmodinfo" >&5
+$as_echo "$ac_cv_search_dlgetmodinfo" >&6; }
+ac_res=$ac_cv_search_dlgetmodinfo
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+
+
+
+
+# Check whether --with-libiconv-prefix was given.
+if test "${with_libiconv_prefix+set}" = set; then :
+ withval=$with_libiconv_prefix;
+ for dir in `echo "$withval" | tr : ' '`; do
+ if test -d $dir/include; then LIBICONV_INCLUDE="-I$dir/include"; fi
+ if test -d $dir/lib; then LIBICONV_LIBDIR="-L$dir/lib"; fi
+ done
+
+fi
+
+
+ BUILD_LIBICONV_LIBDIRS="../libiconv/lib/.libs ../libiconv/lib/_libs"
BUILD_LIBICONV_INCLUDE="-I../libiconv/include"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
@@ -7519,164 +8095,6 @@ $as_echo "$as_me: WARNING: expat support disabled; some features may be unavaila
HAVE_LIBEXPAT=no
else
- if test "X$prefix" = "XNONE"; then
- acl_final_prefix="$ac_default_prefix"
- else
- acl_final_prefix="$prefix"
- fi
- if test "X$exec_prefix" = "XNONE"; then
- acl_final_exec_prefix='${prefix}'
- else
- acl_final_exec_prefix="$exec_prefix"
- fi
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
- prefix="$acl_save_prefix"
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
-$as_echo_n "checking for ld used by GCC... " >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if test "${acl_cv_path_LD+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- acl_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-else
- acl_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$acl_cv_path_LD"
-if test -n "$LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${acl_cv_prog_gnu_ld+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- acl_cv_prog_gnu_ld=yes
-else
- acl_cv_prog_gnu_ld=no
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
-$as_echo "$acl_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$acl_cv_prog_gnu_ld
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
-$as_echo_n "checking for shared library run path origin... " >&6; }
-if test "${acl_cv_rpath+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
-
- CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
- ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
- . ./conftest.sh
- rm -f ./conftest.sh
- acl_cv_rpath=done
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
-$as_echo "$acl_cv_rpath" >&6; }
- wl="$acl_cv_wl"
- libext="$acl_cv_libext"
- shlibext="$acl_cv_shlibext"
- hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- hardcode_direct="$acl_cv_hardcode_direct"
- hardcode_minus_L="$acl_cv_hardcode_minus_L"
- # Check whether --enable-rpath was given.
-if test "${enable_rpath+set}" = set; then :
- enableval=$enable_rpath; :
-else
- enable_rpath=yes
-fi
-
-
-
diff --git a/gold/Makefile.in b/gold/Makefile.in
index cd4d165..01a7fee 100644
--- a/gold/Makefile.in
+++ b/gold/Makefile.in
@@ -78,6 +78,9 @@ am__aclocal_m4_deps = $(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/gettext-sister.m4 \
$(top_srcdir)/../config/lcmessage.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
+ $(top_srcdir)/../config/lib-ld.m4 \
+ $(top_srcdir)/../config/lib-link.m4 \
+ $(top_srcdir)/../config/lib-prefix.m4 \
$(top_srcdir)/../config/nls.m4 \
$(top_srcdir)/../config/override.m4 \
$(top_srcdir)/../config/po.m4 \
@@ -301,6 +304,7 @@ GMSGFMT = @GMSGFMT@
GOLD_LDADD = @GOLD_LDADD@
GOLD_LDFLAGS = @GOLD_LDFLAGS@
GREP = @GREP@
+HAVE_LIBZ = @HAVE_LIBZ@
INCINTL = @INCINTL@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
@@ -314,8 +318,10 @@ LIBINTL = @LIBINTL@
LIBINTL_DEP = @LIBINTL_DEP@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
+LIBZ = @LIBZ@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LTLIBZ = @LTLIBZ@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MERGE_CONSTANTS_FLAG = @MERGE_CONSTANTS_FLAG@
diff --git a/gold/aclocal.m4 b/gold/aclocal.m4
index 8321894..8444d1d 100644
--- a/gold/aclocal.m4
+++ b/gold/aclocal.m4
@@ -984,6 +984,9 @@ m4_include([../config/depstand.m4])
m4_include([../config/gettext-sister.m4])
m4_include([../config/lcmessage.m4])
m4_include([../config/lead-dot.m4])
+m4_include([../config/lib-ld.m4])
+m4_include([../config/lib-link.m4])
+m4_include([../config/lib-prefix.m4])
m4_include([../config/nls.m4])
m4_include([../config/override.m4])
m4_include([../config/po.m4])
diff --git a/gold/config.in b/gold/config.in
index be77810..1871eb5 100644
--- a/gold/config.in
+++ b/gold/config.in
@@ -97,6 +97,9 @@
/* Define if your <locale.h> file defines LC_MESSAGES. */
#undef HAVE_LC_MESSAGES
+/* Define if you have the z library. */
+#undef HAVE_LIBZ
+
/* Define to 1 if you have the <locale.h> header file. */
#undef HAVE_LOCALE_H
diff --git a/gold/configure b/gold/configure
index 23e4735..66554cd 100755
--- a/gold/configure
+++ b/gold/configure
@@ -602,6 +602,9 @@ HAVE_PUBNAMES_FALSE
HAVE_PUBNAMES_TRUE
HAVE_ZLIB_FALSE
HAVE_ZLIB_TRUE
+LTLIBZ
+LIBZ
+HAVE_LIBZ
LIBOBJS
LFS_CFLAGS
GOLD_LDADD
@@ -797,6 +800,9 @@ enable_build_warnings
with_gold_ldflags
with_gold_ldadd
with_zlib
+with_gnu_ld
+enable_rpath
+with_libz_prefix
enable_maintainer_mode
'
ac_precious_vars='build_alias
@@ -1443,6 +1449,7 @@ Optional Features:
--disable-nls do not use Native Language Support
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings
+ --disable-rpath do not hardcode runtime library paths
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
@@ -1454,6 +1461,9 @@ Optional Packages:
--with-gold-ldflags=FLAGS additional link flags for gold
--with-gold-ldadd=LIBS additional libraries for gold
--with-zlib include zlib support (auto/yes/no) default=auto
+ --with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-libz-prefix[=DIR] search for libz in DIR/include and DIR/lib
+ --without-libz-prefix don't search for libz in includedir and libdir
Some influential environment variables:
CC C compiler command
@@ -6874,6 +6884,164 @@ fi
# Link in zlib if we can. This allows us to write compressed sections.
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
+$as_echo_n "checking for ld used by GCC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test "${acl_cv_path_LD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${acl_cv_prog_gnu_ld+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ acl_cv_prog_gnu_ld=yes
+else
+ acl_cv_prog_gnu_ld=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if test "${acl_cv_rpath+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+ enableval=$enable_rpath; :
+else
+ enable_rpath=yes
+fi
+
+
+
# See if the user specified whether he wants zlib support or not.
# Check whether --with-zlib was given.
@@ -6885,60 +7053,472 @@ fi
if test "$with_zlib" != "no"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing zlibVersion" >&5
-$as_echo_n "checking for library containing zlibVersion... " >&6; }
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
+
+
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libz-prefix was given.
+if test "${with_libz_prefix+set}" = set; then :
+ withval=$with_libz_prefix;
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+
+fi
+
+ LIBZ=
+ LTLIBZ=
+ INCZ=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='z '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBZ="${LIBZ}${LIBZ:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBZ="${LTLIBZ}${LTLIBZ:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBZ="${LIBZ}${LIBZ:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_a"
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCZ="${INCZ}${INCZ:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBZ="${LIBZ}${LIBZ:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBZ="${LIBZ}${LIBZ:+ }$dep"
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-l$name"
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBZ="${LIBZ}${LIBZ:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBZ="${LIBZ}${LIBZ:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-R$found_dir"
+ done
+ fi
+
+
+ ac_save_CPPFLAGS="$CPPFLAGS"
+
+ for element in $INCZ; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libz" >&5
+$as_echo_n "checking for libz... " >&6; }
+if test "${ac_cv_libz+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char zlibVersion ();
+ ac_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBZ"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include "zlib.h";
int
main ()
{
-return zlibVersion ();
+int ret = deflateInit(NULL, 1);
;
return 0;
}
_ACEOF
-for ac_lib in '' z; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_zlibVersion=$ac_res
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_libz=yes
+else
+ ac_cv_libz=no
fi
rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_zlibVersion+set}" = set; then :
- break
-fi
-done
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$ac_save_LIBS"
-else
- ac_cv_search_zlibVersion=no
fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_zlibVersion" >&5
-$as_echo "$ac_cv_search_zlibVersion" >&6; }
-ac_res=$ac_cv_search_zlibVersion
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
- for ac_header in zlib.h
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_libz" >&5
+$as_echo "$ac_cv_libz" >&6; }
+ if test "$ac_cv_libz" = yes; then
+ HAVE_LIBZ=yes
+
+$as_echo "#define HAVE_LIBZ 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libz" >&5
+$as_echo_n "checking how to link with libz... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBZ" >&5
+$as_echo "$LIBZ" >&6; }
+ else
+ HAVE_LIBZ=no
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIBZ=
+ LTLIBZ=
+ fi
+
+
+
+
+
+
+ if test "$HAVE_LIBZ" = "yes"; then
+ # Make sure HAVE_ZLIB_H gets defined. Some code uses that over
+ # HAVE_LIBZ, since initially we were only defining HAVE_ZLIB_H.
+ for ac_header in zlib.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
if test "x$ac_cv_header_zlib_h" = x""yes; then :
@@ -6950,9 +7530,9 @@ fi
done
-fi
-
- if test "$with_zlib" = "yes" -a "$ac_cv_header_zlib_h" != "yes"; then
+ LIBS="$LIBS $LIBZ"
+ fi
+ if test "$with_zlib" = "yes" -a "$HAVE_LIBZ" != "yes"; then
as_fn_error "zlib (libz) library was explicitly requested but not found" "$LINENO" 5
fi
fi
diff --git a/gold/testsuite/Makefile.in b/gold/testsuite/Makefile.in
index d818570..14aa076 100644
--- a/gold/testsuite/Makefile.in
+++ b/gold/testsuite/Makefile.in
@@ -756,6 +756,9 @@ am__aclocal_m4_deps = $(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/gettext-sister.m4 \
$(top_srcdir)/../config/lcmessage.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
+ $(top_srcdir)/../config/lib-ld.m4 \
+ $(top_srcdir)/../config/lib-link.m4 \
+ $(top_srcdir)/../config/lib-prefix.m4 \
$(top_srcdir)/../config/nls.m4 \
$(top_srcdir)/../config/override.m4 \
$(top_srcdir)/../config/po.m4 \
@@ -2055,6 +2058,7 @@ GMSGFMT = @GMSGFMT@
GOLD_LDADD = @GOLD_LDADD@
GOLD_LDFLAGS = @GOLD_LDFLAGS@
GREP = @GREP@
+HAVE_LIBZ = @HAVE_LIBZ@
INCINTL = @INCINTL@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
@@ -2068,8 +2072,10 @@ LIBINTL = @LIBINTL@
LIBINTL_DEP = @LIBINTL_DEP@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
+LIBZ = @LIBZ@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LTLIBZ = @LTLIBZ@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MERGE_CONSTANTS_FLAG = @MERGE_CONSTANTS_FLAG@
diff --git a/ld/Makefile.in b/ld/Makefile.in
index 311452d..a54bc97 100644
--- a/ld/Makefile.in
+++ b/ld/Makefile.in
@@ -75,6 +75,9 @@ am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
$(top_srcdir)/../config/largefile.m4 \
$(top_srcdir)/../config/lcmessage.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
+ $(top_srcdir)/../config/lib-ld.m4 \
+ $(top_srcdir)/../config/lib-link.m4 \
+ $(top_srcdir)/../config/lib-prefix.m4 \
$(top_srcdir)/../config/nls.m4 \
$(top_srcdir)/../config/override.m4 \
$(top_srcdir)/../config/plugins.m4 \
@@ -226,6 +229,7 @@ FGREP = @FGREP@
GENCAT = @GENCAT@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
+HAVE_LIBZ = @HAVE_LIBZ@
HDEFINES = @HDEFINES@
#stuff for self hosting (can be overridden in config file).
@@ -250,6 +254,7 @@ LIBINTL_DEP = @LIBINTL_DEP@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LIBZ = @LIBZ@
# Search path to override the default search path for -lfoo libraries.
# If LIB_PATH is empty, the ones in the script (if any) are left alone.
@@ -262,6 +267,7 @@ LIB_PATH = @LIB_PATH@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LTLIBZ = @LTLIBZ@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
diff --git a/ld/aclocal.m4 b/ld/aclocal.m4
index 6585160..fed7950 100644
--- a/ld/aclocal.m4
+++ b/ld/aclocal.m4
@@ -997,6 +997,9 @@ m4_include([../config/gettext-sister.m4])
m4_include([../config/largefile.m4])
m4_include([../config/lcmessage.m4])
m4_include([../config/lead-dot.m4])
+m4_include([../config/lib-ld.m4])
+m4_include([../config/lib-link.m4])
+m4_include([../config/lib-prefix.m4])
m4_include([../config/nls.m4])
m4_include([../config/override.m4])
m4_include([../config/plugins.m4])
diff --git a/ld/config.in b/ld/config.in
index 2ab4844..226009e 100644
--- a/ld/config.in
+++ b/ld/config.in
@@ -68,6 +68,9 @@
/* Define if your <locale.h> file defines LC_MESSAGES. */
#undef HAVE_LC_MESSAGES
+/* Define if you have the z library. */
+#undef HAVE_LIBZ
+
/* Define to 1 if you have the <limits.h> header file. */
#undef HAVE_LIMITS_H
diff --git a/ld/configure b/ld/configure
index 8a7bd20..a0078da 100755
--- a/ld/configure
+++ b/ld/configure
@@ -609,6 +609,9 @@ EMUL_EXTRA_OFILES
EMULATION_OFILES
EMUL
STRINGIFY
+LTLIBZ
+LIBZ
+HAVE_LIBZ
enable_initfini_array
ENABLE_PLUGINS_FALSE
ENABLE_PLUGINS_TRUE
@@ -790,6 +793,8 @@ enable_build_warnings
enable_nls
enable_initfini_array
with_zlib
+enable_rpath
+with_libz_prefix
'
ac_precious_vars='build_alias
host_alias
@@ -1446,6 +1451,7 @@ Optional Features:
--enable-build-warnings enable build-time compiler warnings
--disable-nls do not use Native Language Support
--enable-initfini-array use .init_array/.fini_array sections
+ --disable-rpath do not hardcode runtime library paths
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
@@ -1456,6 +1462,9 @@ Optional Packages:
--with-lib-path=dir1:dir2... set default LIB_PATH
--with-sysroot=DIR Search for usr/lib et al within DIR.
--with-zlib include zlib support (auto/yes/no) default=auto
+ --with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-libz-prefix[=DIR] search for libz in DIR/include and DIR/lib
+ --without-libz-prefix don't search for libz in includedir and libdir
Some influential environment variables:
CC C compiler command
@@ -11712,7 +11721,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11715 "configure"
+#line 11724 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -11818,7 +11827,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11821 "configure"
+#line 11830 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -16757,6 +16766,164 @@ _ACEOF
# Link in zlib if we can. This is needed only for the bootstrap tests
# right now, since those tests use libbfd, which depends on zlib.
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
+$as_echo_n "checking for ld used by GCC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test "${acl_cv_path_LD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${acl_cv_prog_gnu_ld+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ acl_cv_prog_gnu_ld=yes
+else
+ acl_cv_prog_gnu_ld=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if test "${acl_cv_rpath+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+ enableval=$enable_rpath; :
+else
+ enable_rpath=yes
+fi
+
+
+
# See if the user specified whether he wants zlib support or not.
# Check whether --with-zlib was given.
@@ -16768,60 +16935,472 @@ fi
if test "$with_zlib" != "no"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing zlibVersion" >&5
-$as_echo_n "checking for library containing zlibVersion... " >&6; }
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
+
+
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libz-prefix was given.
+if test "${with_libz_prefix+set}" = set; then :
+ withval=$with_libz_prefix;
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+
+fi
+
+ LIBZ=
+ LTLIBZ=
+ INCZ=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='z '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBZ="${LIBZ}${LIBZ:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBZ="${LTLIBZ}${LTLIBZ:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBZ="${LIBZ}${LIBZ:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_a"
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCZ="${INCZ}${INCZ:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBZ="${LIBZ}${LIBZ:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBZ="${LIBZ}${LIBZ:+ }$dep"
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-l$name"
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBZ="${LIBZ}${LIBZ:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBZ="${LIBZ}${LIBZ:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-R$found_dir"
+ done
+ fi
+
+
+ ac_save_CPPFLAGS="$CPPFLAGS"
+
+ for element in $INCZ; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libz" >&5
+$as_echo_n "checking for libz... " >&6; }
+if test "${ac_cv_libz+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char zlibVersion ();
+ ac_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBZ"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include "zlib.h";
int
main ()
{
-return zlibVersion ();
+int ret = deflateInit(NULL, 1);
;
return 0;
}
_ACEOF
-for ac_lib in '' z; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_zlibVersion=$ac_res
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_libz=yes
+else
+ ac_cv_libz=no
fi
rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_zlibVersion+set}" = set; then :
- break
-fi
-done
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$ac_save_LIBS"
-else
- ac_cv_search_zlibVersion=no
fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_zlibVersion" >&5
-$as_echo "$ac_cv_search_zlibVersion" >&6; }
-ac_res=$ac_cv_search_zlibVersion
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
- for ac_header in zlib.h
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_libz" >&5
+$as_echo "$ac_cv_libz" >&6; }
+ if test "$ac_cv_libz" = yes; then
+ HAVE_LIBZ=yes
+
+$as_echo "#define HAVE_LIBZ 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libz" >&5
+$as_echo_n "checking how to link with libz... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBZ" >&5
+$as_echo "$LIBZ" >&6; }
+ else
+ HAVE_LIBZ=no
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIBZ=
+ LTLIBZ=
+ fi
+
+
+
+
+
+
+ if test "$HAVE_LIBZ" = "yes"; then
+ # Make sure HAVE_ZLIB_H gets defined. Some code uses that over
+ # HAVE_LIBZ, since initially we were only defining HAVE_ZLIB_H.
+ for ac_header in zlib.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
if test "x$ac_cv_header_zlib_h" = x""yes; then :
@@ -16833,9 +17412,9 @@ fi
done
-fi
-
- if test "$with_zlib" = "yes" -a "$ac_cv_header_zlib_h" != "yes"; then
+ LIBS="$LIBS $LIBZ"
+ fi
+ if test "$with_zlib" = "yes" -a "$HAVE_LIBZ" != "yes"; then
as_fn_error "zlib (libz) library was explicitly requested but not found" "$LINENO" 5
fi
fi
diff --git a/sim/common/acinclude.m4 b/sim/common/acinclude.m4
index f96ec35..430ae0e 100644
--- a/sim/common/acinclude.m4
+++ b/sim/common/acinclude.m4
@@ -20,6 +20,9 @@
# Include global overrides and fixes for Autoconf.
m4_include(../../config/override.m4)
+m4_include([../../config/lib-ld.m4])
+m4_include([../../config/lib-link.m4])
+m4_include([../../config/lib-prefix.m4])
sinclude([../../config/zlib.m4])
m4_include([../../config/plugins.m4])
m4_include([../../libtool.m4])
diff --git a/sim/common/config.in b/sim/common/config.in
index 5b8ebd8..d6d595e 100644
--- a/sim/common/config.in
+++ b/sim/common/config.in
@@ -31,6 +31,9 @@
/* Define to 1 if you have the `socket' library (-lsocket). */
#undef HAVE_LIBSOCKET
+/* Define if you have the z library. */
+#undef HAVE_LIBZ
+
/* Define to 1 if you have the `lstat' function. */
#undef HAVE_LSTAT
diff --git a/sim/common/configure b/sim/common/configure
index add4c0f..16f6f28 100755
--- a/sim/common/configure
+++ b/sim/common/configure
@@ -633,6 +633,9 @@ SED
LIBTOOL
PLUGINS_FALSE
PLUGINS_TRUE
+LTLIBZ
+LIBZ
+HAVE_LIBZ
CATOBJEXT
GENCAT
INSTOBJEXT
@@ -744,12 +747,14 @@ ac_subst_files=''
ac_user_opts='
enable_option_checking
with_zlib
+with_gnu_ld
+enable_rpath
+with_libz_prefix
enable_plugins
enable_shared
enable_static
with_pic
enable_fast_install
-with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
enable_sim_bswap
@@ -1388,6 +1393,7 @@ Optional Features:
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --disable-rpath do not hardcode runtime library paths
--enable-plugins Enable support for plugins
--enable-shared[=PKGS] build shared libraries [default=yes]
--enable-static[=PKGS] build static libraries [default=yes]
@@ -1407,6 +1413,9 @@ Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-zlib include zlib support (auto/yes/no) default=auto
+ --with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-libz-prefix[=DIR] search for libz in DIR/include and DIR/lib
+ --without-libz-prefix don't search for libz in includedir and libdir
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
@@ -3788,6 +3797,164 @@ rmdir .tst 2>/dev/null
DEPDIR="${am__leading_dot}deps"
+
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
+$as_echo_n "checking for ld used by GCC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test "${acl_cv_path_LD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${acl_cv_prog_gnu_ld+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ acl_cv_prog_gnu_ld=yes
+else
+ acl_cv_prog_gnu_ld=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if test "${acl_cv_rpath+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+ enableval=$enable_rpath; :
+else
+ enable_rpath=yes
+fi
+
+
case `pwd` in
*\ * | *\ *)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
@@ -6962,60 +7129,472 @@ fi
if test "$with_zlib" != "no"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing zlibVersion" >&5
-$as_echo_n "checking for library containing zlibVersion... " >&6; }
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
+
+
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libz-prefix was given.
+if test "${with_libz_prefix+set}" = set; then :
+ withval=$with_libz_prefix;
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+
+fi
+
+ LIBZ=
+ LTLIBZ=
+ INCZ=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='z '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBZ="${LIBZ}${LIBZ:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBZ="${LTLIBZ}${LTLIBZ:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBZ="${LIBZ}${LIBZ:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_a"
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCZ="${INCZ}${INCZ:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBZ="${LIBZ}${LIBZ:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBZ="${LIBZ}${LIBZ:+ }$dep"
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-l$name"
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBZ="${LIBZ}${LIBZ:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBZ="${LIBZ}${LIBZ:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-R$found_dir"
+ done
+ fi
+
+
+ ac_save_CPPFLAGS="$CPPFLAGS"
+
+ for element in $INCZ; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libz" >&5
+$as_echo_n "checking for libz... " >&6; }
+if test "${ac_cv_libz+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char zlibVersion ();
+ ac_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBZ"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include "zlib.h";
int
main ()
{
-return zlibVersion ();
+int ret = deflateInit(NULL, 1);
;
return 0;
}
_ACEOF
-for ac_lib in '' z; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_zlibVersion=$ac_res
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_libz=yes
+else
+ ac_cv_libz=no
fi
rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_zlibVersion+set}" = set; then :
- break
-fi
-done
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$ac_save_LIBS"
-else
- ac_cv_search_zlibVersion=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_zlibVersion" >&5
-$as_echo "$ac_cv_search_zlibVersion" >&6; }
-ac_res=$ac_cv_search_zlibVersion
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
- for ac_header in zlib.h
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_libz" >&5
+$as_echo "$ac_cv_libz" >&6; }
+ if test "$ac_cv_libz" = yes; then
+ HAVE_LIBZ=yes
+
+$as_echo "#define HAVE_LIBZ 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libz" >&5
+$as_echo_n "checking how to link with libz... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBZ" >&5
+$as_echo "$LIBZ" >&6; }
+ else
+ HAVE_LIBZ=no
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIBZ=
+ LTLIBZ=
+ fi
+
+
+
+
+
+
+ if test "$HAVE_LIBZ" = "yes"; then
+ # Make sure HAVE_ZLIB_H gets defined. Some code uses that over
+ # HAVE_LIBZ, since initially we were only defining HAVE_ZLIB_H.
+ for ac_header in zlib.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
if test "x$ac_cv_header_zlib_h" = x""yes; then :
@@ -7027,9 +7606,9 @@ fi
done
-fi
-
- if test "$with_zlib" = "yes" -a "$ac_cv_header_zlib_h" != "yes"; then
+ LIBS="$LIBS $LIBZ"
+ fi
+ if test "$with_zlib" = "yes" -a "$HAVE_LIBZ" != "yes"; then
as_fn_error "zlib (libz) library was explicitly requested but not found" "$LINENO" 5
fi
fi
@@ -10623,7 +11202,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10626 "configure"
+#line 11205 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -10729,7 +11308,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10732 "configure"
+#line 11311 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
diff --git a/sim/ppc/config.in b/sim/ppc/config.in
index b0c9e6f..32605bc 100644
--- a/sim/ppc/config.in
+++ b/sim/ppc/config.in
@@ -106,6 +106,9 @@
/* Define to 1 if you have the `kill' function. */
#undef HAVE_KILL
+/* Define if you have the z library. */
+#undef HAVE_LIBZ
+
/* Define to 1 if you have the `link' function. */
#undef HAVE_LINK
diff --git a/sim/ppc/configure b/sim/ppc/configure
index 5044383..6ec0fd0 100755
--- a/sim/ppc/configure
+++ b/sim/ppc/configure
@@ -627,6 +627,9 @@ HDEFINES
CFLAGS_FOR_BUILD
CC_FOR_BUILD
LIBOBJS
+LTLIBZ
+LIBZ
+HAVE_LIBZ
target_os
target_vendor
target_cpu
@@ -767,6 +770,9 @@ enable_sim_xor_endian
with_pkgversion
with_bugurl
with_zlib
+with_gnu_ld
+enable_rpath
+with_libz_prefix
enable_plugins
'
ac_precious_vars='build_alias
@@ -1431,6 +1437,7 @@ Optional Features:
--enable-sim-trace Specify whether tracing is supported.
--enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings except for idecode.o, semantics.o and psim.o
--enable-sim-xor-endian=n Specify number bytes involved in PowerPC XOR bi-endian mode (default 8).
+ --disable-rpath do not hardcode runtime library paths
--enable-plugins Enable support for plugins
Optional Packages:
@@ -1439,6 +1446,9 @@ Optional Packages:
--with-pkgversion=PKG Use PKG in the version string in place of "GDB"
--with-bugurl=URL Direct users to URL to report a bug
--with-zlib include zlib support (auto/yes/no) default=auto
+ --with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-libz-prefix[=DIR] search for libz in DIR/include and DIR/lib
+ --without-libz-prefix don't search for libz in includedir and libdir
Some influential environment variables:
CC C compiler command
@@ -2448,6 +2458,37 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+# lib-ld.m4 serial 2 (gettext-0.12)
+
+
+
+
+
+
+# lib-link.m4 serial 4 (gettext-0.12)
+
+
+
+
+
+
+
+
+
+
+
+
+# lib-prefix.m4 serial 2 (gettext-0.12)
+
+
+
+
+
+
+
+
+
+
@@ -6817,6 +6858,164 @@ program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
# BFD conditionally uses zlib, so we must link it in if libbfd does, by
# using the same condition.
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
+$as_echo_n "checking for ld used by GCC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test "${acl_cv_path_LD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${acl_cv_prog_gnu_ld+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ acl_cv_prog_gnu_ld=yes
+else
+ acl_cv_prog_gnu_ld=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if test "${acl_cv_rpath+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+ enableval=$enable_rpath; :
+else
+ enable_rpath=yes
+fi
+
+
+
# See if the user specified whether he wants zlib support or not.
# Check whether --with-zlib was given.
@@ -6828,60 +7027,472 @@ fi
if test "$with_zlib" != "no"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing zlibVersion" >&5
-$as_echo_n "checking for library containing zlibVersion... " >&6; }
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
+
+
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libz-prefix was given.
+if test "${with_libz_prefix+set}" = set; then :
+ withval=$with_libz_prefix;
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+
+fi
+
+ LIBZ=
+ LTLIBZ=
+ INCZ=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='z '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBZ="${LIBZ}${LIBZ:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBZ="${LTLIBZ}${LTLIBZ:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBZ="${LIBZ}${LIBZ:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_so"
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBZ="${LIBZ}${LIBZ:+ }$found_a"
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCZ="${INCZ}${INCZ:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBZ="${LIBZ}${LIBZ:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBZ; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBZ="${LIBZ}${LIBZ:+ }$dep"
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBZ="${LIBZ}${LIBZ:+ }-l$name"
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBZ="${LIBZ}${LIBZ:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBZ="${LIBZ}${LIBZ:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBZ="${LTLIBZ}${LTLIBZ:+ }-R$found_dir"
+ done
+ fi
+
+
+ ac_save_CPPFLAGS="$CPPFLAGS"
+
+ for element in $INCZ; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libz" >&5
+$as_echo_n "checking for libz... " >&6; }
+if test "${ac_cv_libz+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char zlibVersion ();
+ ac_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBZ"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include "zlib.h";
int
main ()
{
-return zlibVersion ();
+int ret = deflateInit(NULL, 1);
;
return 0;
}
_ACEOF
-for ac_lib in '' z; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_zlibVersion=$ac_res
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_libz=yes
+else
+ ac_cv_libz=no
fi
rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_zlibVersion+set}" = set; then :
- break
-fi
-done
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$ac_save_LIBS"
-else
- ac_cv_search_zlibVersion=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_zlibVersion" >&5
-$as_echo "$ac_cv_search_zlibVersion" >&6; }
-ac_res=$ac_cv_search_zlibVersion
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
- for ac_header in zlib.h
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_libz" >&5
+$as_echo "$ac_cv_libz" >&6; }
+ if test "$ac_cv_libz" = yes; then
+ HAVE_LIBZ=yes
+
+$as_echo "#define HAVE_LIBZ 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libz" >&5
+$as_echo_n "checking how to link with libz... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBZ" >&5
+$as_echo "$LIBZ" >&6; }
+ else
+ HAVE_LIBZ=no
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIBZ=
+ LTLIBZ=
+ fi
+
+
+
+
+
+
+ if test "$HAVE_LIBZ" = "yes"; then
+ # Make sure HAVE_ZLIB_H gets defined. Some code uses that over
+ # HAVE_LIBZ, since initially we were only defining HAVE_ZLIB_H.
+ for ac_header in zlib.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
if test "x$ac_cv_header_zlib_h" = x""yes; then :
@@ -6893,9 +7504,9 @@ fi
done
-fi
-
- if test "$with_zlib" = "yes" -a "$ac_cv_header_zlib_h" != "yes"; then
+ LIBS="$LIBS $LIBZ"
+ fi
+ if test "$with_zlib" = "yes" -a "$HAVE_LIBZ" != "yes"; then
as_fn_error "zlib (libz) library was explicitly requested but not found" "$LINENO" 5
fi
fi
--
1.9.1