This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[PATCH 16/16 v2] Non-stop follow exec tests
- From: Don Breazeal <donb at codesourcery dot com>
- To: <gdb-patches at sourceware dot org>
- Date: Wed, 20 Aug 2014 17:29:24 -0700
- Subject: [PATCH 16/16 v2] Non-stop follow exec tests
- Authentication-results: sourceware.org; auth=none
- References: <1407434395-19089-1-git-send-email-donb at codesourcery dot com>
This patch modifies some follow-exec tests, getting one to work with
extended-remote targets and extending another for more coverage.
First, gdb.base/foll-exec.exp is changed to use clean_restart for
the initial test startup and to replace the proc zap_session
everywhere in the test. This provides for extended-remote targets
to be able to do runto_main.
The functionality is changed slightly by this, in that zap_session
did not exit and restart the debugger as clean_restart does.
However, none of the tests are checking for the interaction of
follow-exec with re-running the program, so the functionality is
tested in the same way.
The other change extends the non-ldr-exc-*.exp tests so that they run all
their cases in non-stop mode as well as all-stop mode. These tests cover
handling of exec events when non-leader threads call exec.
The tests now report 'untested when 'runto_main' fails. In non-stop mode
with 'target extended-remote', runto_main always fails with something like:
(gdb) run
Starting program: /home/me/gdb/testsuite/gdb.threads/non-ldr-exc-4
Unexpected vCont reply in non-stop mode: T0506:10e0ffffff7f0000;07:c8deffffff7f0000;10:c1a6abaaaa2a0000;thread:p5ee.5ee;core:0;
This happens in other tests as well (e.g. gdb.threads/thread_events.exp),
so I copied the error handling from that test so that the non-stop tests
report 'untested' for target extended-remote. I couldn't find anything
related to this in the gdb bug database, but I assume it is a known problem
since the other tests handle it.
Thanks
--Don
gdb/testsuite/
2014-08-20 Don Breazeal <donb@codesourcery.com>
* gdb.base/foll-exec.exp (zap_session): Delete proc.
(do_exec_tests): Replace zap_session with clean_restart.
(main): Use clean_restart for initial GDB startup.
* gdb.threads/non-ldr-exc-1.exp: Add non-stop cases.
* gdb.threads/non-ldr-exc-2.exp: Ditto.
* gdb.threads/non-ldr-exc-3.exp: Ditto.
* gdb.threads/non-ldr-exc-4.exp: Ditto.
---
gdb/testsuite/gdb.base/foll-exec.exp | 44 ++++-----------------------
gdb/testsuite/gdb.threads/non-ldr-exc-1.exp | 20 ++++++++++--
gdb/testsuite/gdb.threads/non-ldr-exc-2.exp | 36 +++++++++++++++++++---
gdb/testsuite/gdb.threads/non-ldr-exc-3.exp | 36 +++++++++++++++++++---
gdb/testsuite/gdb.threads/non-ldr-exc-4.exp | 20 ++++++++++--
5 files changed, 100 insertions(+), 56 deletions(-)
diff --git a/gdb/testsuite/gdb.base/foll-exec.exp b/gdb/testsuite/gdb.base/foll-exec.exp
index c1b1354..6051d29 100644
--- a/gdb/testsuite/gdb.base/foll-exec.exp
+++ b/gdb/testsuite/gdb.base/foll-exec.exp
@@ -44,32 +44,6 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable $com
return -1
}
-proc zap_session {} {
- global gdb_prompt
- global binfile
-
- send_gdb "kill\n"
- gdb_expect {
- -re ".*Kill the program being debugged.*y or n. $" {
- gdb_test_no_output "y" ""
- send_gdb "file $binfile\n"
- gdb_expect {
- -re ".*Load new symbol table from.*y or n. $" {
- send_gdb "y\n"
- gdb_expect {
- -re "Reading symbols from.*$gdb_prompt $" {}
- timeout { fail "loading symbols (timeout)"; return }
- }
- }
- -re ".*gdb_prompt $" {}
- timeout { fail "loading symbols (timeout)"; return }
- }
- }
- -re ".*$gdb_prompt $" {}
- timeout { fail "killing inferior (timeout)" ; return }
- }
-}
-
proc do_exec_tests {} {
global gdb_prompt
global binfile
@@ -103,7 +77,7 @@ proc do_exec_tests {} {
return
}
- zap_session
+ clean_restart ${binfile}
# Start the program running, and stop at main.
#
@@ -191,7 +165,7 @@ proc do_exec_tests {} {
# Explicitly kill this program, or a subsequent rerun actually runs
# the exec'd program, not the original program...
- zap_session
+ clean_restart ${binfile}
# Start the program running, and stop at main.
#
@@ -264,7 +238,7 @@ proc do_exec_tests {} {
# Explicitly kill this program, or a subsequent rerun actually runs
# the exec'd program, not the original program...
- zap_session
+ clean_restart ${binfile}
# Start the program running, and stop at main.
#
@@ -324,7 +298,7 @@ proc do_exec_tests {} {
# Explicitly kill this program, or a subsequent rerun actually runs
# the exec'd program, not the original program...
- zap_session
+ clean_restart ${binfile}
# Start the program running, and stop at main.
#
@@ -376,9 +350,7 @@ proc do_exec_tests {} {
timeout {fail "(timeout) print execd-program/local_j (after execv)"}
}
- # Explicitly kill this program, or a subsequent rerun actually runs
- # the exec'd program, not the original program...
- zap_session
+ clean_restart ${binfile}
# Start the program running, and stop at main.
#
@@ -402,11 +374,7 @@ proc do_exec_tests {} {
# Start with a fresh gdb
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
+clean_restart $binfile
# This is a test of gdb's ability to follow a process through a
# Unix exec() system call.
diff --git a/gdb/testsuite/gdb.threads/non-ldr-exc-1.exp b/gdb/testsuite/gdb.threads/non-ldr-exc-1.exp
index 8123a99..e35236a 100644
--- a/gdb/testsuite/gdb.threads/non-ldr-exc-1.exp
+++ b/gdb/testsuite/gdb.threads/non-ldr-exc-1.exp
@@ -28,13 +28,19 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
return -1
}
-proc do_test { lock_sched } {
- with_test_prefix "lock-sched$lock_sched" {
+proc do_test { lock_sched mode } {
+ with_test_prefix "lock-sched$lock_sched,$mode" {
global executable
clean_restart ${executable}
+ if { $mode == "non-stop" } {
+ gdb_test_no_output "set target-async on" "set async mode"
+ gdb_test_no_output "set non-stop on" "set non-stop mode"
+ }
+
if ![runto_main] {
+ untested "could not run to main"
return -1
}
@@ -48,11 +54,17 @@ proc do_test { lock_sched } {
gdb_test_no_output "set scheduler-locking on"
}
+ if { $mode == "non-stop" } {
+ gdb_test "thread 2" "Switching.*"
+ }
+
gdb_test "continue" \
".*is executing new program.*Breakpoint 1, main.* at .*" \
"continue over exec"
}
}
-do_test 0
-do_test 1
+do_test 0 "all-stop"
+do_test 1 "all-stop"
+do_test 0 "non-stop"
+do_test 1 "non-stop"
diff --git a/gdb/testsuite/gdb.threads/non-ldr-exc-2.exp b/gdb/testsuite/gdb.threads/non-ldr-exc-2.exp
index 857e7bc..a0281d6 100644
--- a/gdb/testsuite/gdb.threads/non-ldr-exc-2.exp
+++ b/gdb/testsuite/gdb.threads/non-ldr-exc-2.exp
@@ -29,18 +29,42 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
return -1
}
-proc do_test { lock_sched } {
- with_test_prefix "lock-sched$lock_sched" {
+# Test for breakpoint event among async thread events.
+# gdb_continue_to_breakpoint requires "$gdb_prompt $", but
+# here we may get a thread event message instead of EOL.
+proc gdb_continue_to_breakpoint_async { name pattern } {
+ global gdb_prompt
+
+ gdb_test_multiple "continue" $name {
+ -re ".*Breakpoint .* (at|in) ($pattern)$gdb_prompt " {
+ pass $name
+ }
+ }
+}
+
+proc do_test { lock_sched mode } {
+ with_test_prefix "lock-sched$lock_sched,$mode" {
global executable
clean_restart ${executable}
+ if { $mode == "non-stop" } {
+ gdb_test_no_output "set target-async on" "set async mode"
+ gdb_test_no_output "set non-stop on" "set non-stop mode"
+ }
+
if ![runto_main] {
+ untested "could not run to main"
return -1
}
gdb_breakpoint [gdb_get_line_number "break-here"]
- gdb_continue_to_breakpoint "break-here" ".* break-here .*"
+ if { $mode == "non-stop" } {
+ gdb_continue_to_breakpoint_async "break-here" ".* break-here .*"
+ gdb_test "thread 2" "Switching.*"
+ } else {
+ gdb_continue_to_breakpoint "break-here" ".* break-here .*"
+ }
gdb_test "info threads" \
"\r\n\[ \t\]*Id\[ \t\]+Target\[ \t\]+Id\[ \t\]+Frame\[ \t\]*\r\n\\* 2 *Thread \[^\r\n\]* at \[^\r\n\]*" \
@@ -59,5 +83,7 @@ proc do_test { lock_sched } {
}
}
-do_test 0
-do_test 1
+do_test 0 "all-stop"
+do_test 1 "all-stop"
+do_test 0 "non-stop"
+do_test 1 "non-stop"
diff --git a/gdb/testsuite/gdb.threads/non-ldr-exc-3.exp b/gdb/testsuite/gdb.threads/non-ldr-exc-3.exp
index 7f33d39..69c27d8 100644
--- a/gdb/testsuite/gdb.threads/non-ldr-exc-3.exp
+++ b/gdb/testsuite/gdb.threads/non-ldr-exc-3.exp
@@ -31,18 +31,42 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
return -1
}
-proc do_test { lock_sched } {
- with_test_prefix "lock-sched$lock_sched" {
+# Test for breakpoint event among async thread events.
+# gdb_continue_to_breakpoint requires "$gdb_prompt $", but
+# here we may get a thread event message instead of EOL.
+proc gdb_continue_to_breakpoint_async { name pattern } {
+ global gdb_prompt
+
+ gdb_test_multiple "continue" $name {
+ -re ".*Breakpoint .* (at|in) ($pattern)$gdb_prompt " {
+ pass $name
+ }
+ }
+}
+
+proc do_test { lock_sched mode } {
+ with_test_prefix "lock-sched$lock_sched,$mode" {
global executable
clean_restart ${executable}
+ if { $mode == "non-stop" } {
+ gdb_test_no_output "set target-async on" "set async mode"
+ gdb_test_no_output "set non-stop on" "set non-stop mode"
+ }
+
if ![runto_main] {
+ untested "could not run to main"
return -1
}
gdb_breakpoint [gdb_get_line_number "break-here"]
- gdb_continue_to_breakpoint "break-here" ".* break-here .*"
+ if { $mode == "non-stop" } {
+ gdb_continue_to_breakpoint_async "break-here" ".* break-here .*"
+ gdb_test "thread 2" "Switching.*"
+ } else {
+ gdb_continue_to_breakpoint "break-here" ".* break-here .*"
+ }
# Also test with sched-lock to make sure we can follow the
# non-leader thread execing even though the main thread wasn't
@@ -57,5 +81,7 @@ proc do_test { lock_sched } {
}
}
-do_test 0
-do_test 1
+do_test 0 "all-stop"
+do_test 1 "all-stop"
+do_test 0 "non-stop"
+do_test 1 "non-stop"
diff --git a/gdb/testsuite/gdb.threads/non-ldr-exc-4.exp b/gdb/testsuite/gdb.threads/non-ldr-exc-4.exp
index a5e88bb..f83577d 100644
--- a/gdb/testsuite/gdb.threads/non-ldr-exc-4.exp
+++ b/gdb/testsuite/gdb.threads/non-ldr-exc-4.exp
@@ -30,13 +30,19 @@ if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executab
return -1
}
-proc do_test { lock_sched } {
- with_test_prefix "lock-sched$lock_sched" {
+proc do_test { lock_sched mode } {
+ with_test_prefix "lock-sched$lock_sched,$mode" {
global executable
clean_restart ${executable}
+ if { $mode == "non-stop" } {
+ gdb_test_no_output "set target-async on" "set async mode"
+ gdb_test_no_output "set non-stop on" "set non-stop mode"
+ }
+
if ![runto_main] {
+ untested "could not run to main"
return -1
}
@@ -50,11 +56,17 @@ proc do_test { lock_sched } {
gdb_test_no_output "set scheduler-locking on"
}
+ if { $mode == "non-stop" } {
+ gdb_test "thread 2" "Switching.*"
+ }
+
gdb_test "continue" \
".*is executing new program.*Breakpoint 1, main.* at .*" \
"continue over exec"
}
}
-do_test 0
-do_test 1
+do_test 0 "all-stop"
+do_test 1 "all-stop"
+do_test 0 "non-stop"
+do_test 1 "non-stop"
--
1.7.0.4