This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
Re: [patch] Share options between info and man page
- From: Mingjie Xing <mingjie dot xing at gmail dot com>
- To: Eli Zaretskii <eliz at gnu dot org>
- Cc: gdb-patches at sourceware dot org
- Date: Tue, 10 Jun 2014 15:02:49 +0800
- Subject: Re: [patch] Share options between info and man page
- Authentication-results: sourceware.org; auth=none
- References: <CADNgcEyi=PBbjzgK3MA=FM8QjWXz_jv-KuXYe5b4-pu+LUY6xA at mail dot gmail dot com> <831tuy2kzi dot fsf at gnu dot org> <CADNgcExfk1A=EWKGDD4dPD0E0+H5=_a+ssV1qV4-xzXO3OSDyg at mail dot gmail dot com> <83ioo91nnk dot fsf at gnu dot org> <CADNgcEwweARHgsH5ppJEY=Q8UrtKK7xi8mU6BN7EbjUs=ic1xg at mail dot gmail dot com>
Sorry for the missing patch.
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index a0fb66d..b9675af 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -921,6 +921,8 @@ in sequential order. The order makes a difference when the
@node File Options
@subsection Choosing Files
+@c man begin OPTIONS gdb
+
When @value{GDBN} starts, it reads any arguments other than options as
specifying an executable file and core file (or process ID). This is
the same as if the arguments were specified by the @samp{-se} and
@@ -945,11 +947,25 @@ them, so long as enough of the option is present to be unambiguous.
(If you prefer, you can flag option arguments with @samp{--} rather
than @samp{-}, though we illustrate the more usual convention.)
+@ifset man
+All the options and command line arguments you give are processed
+in sequential order. The order makes a difference when the @option{-x}
+option is used.
+@end ifset
+
@c NOTE: the @cindex entries here use double dashes ON PURPOSE. This
@c way, both those who look for -foo and --foo in the index, will find
@c it.
@table @code
+@ifset man
+@item -help
+@itemx -h
+@cindex @code{--help}
+@cindex @code{-h}
+List all options, with brief explanations.
+@end ifset
+
@item -symbols @var{file}
@itemx -s @var{file}
@cindex @code{--symbols}
@@ -1034,9 +1050,13 @@ This makes startup slower, but makes future operations faster.
@end table
+@c man end
+
@node Mode Options
@subsection Choosing Modes
+@c man begin OPTIONS gdb
+
You can run @value{GDBN} in various alternative modes---for example, in
batch mode or quiet mode.
@@ -1280,6 +1300,8 @@ important when reporting @value{GDBN} bugs (@pxref{GDB Bugs}).
@end table
+@c man end
+
@node Startup
@subsection What @value{GDBN} Does During Startup
@cindex @value{GDBN} startup
@@ -1374,7 +1396,6 @@ port of @value{GDBN} uses the standard name, but if it finds a
@file{gdb.ini} file in your home directory, it warns you about that
and suggests to rename the file to the standard name.
-
@node Quitting GDB
@section Quitting @value{GDBN}
@cindex exiting @value{GDBN}
@@ -39837,113 +39858,7 @@ as the @code{gdb} entry in the @code{info} program.
@end ifset
@c man end
-@c man begin OPTIONS gdb
-Any arguments other than options specify an executable
-file and core file (or process ID); that is, the first argument
-encountered with no
-associated option flag is equivalent to a @option{-se} option, and the second,
-if any, is equivalent to a @option{-c} option if it's the name of a file.
-Many options have
-both long and short forms; both are shown here. The long forms are also
-recognized if you truncate them, so long as enough of the option is
-present to be unambiguous. (If you prefer, you can flag option
-arguments with @option{+} rather than @option{-}, though we illustrate the
-more usual convention.)
-
-All the options and command line arguments you give are processed
-in sequential order. The order makes a difference when the @option{-x}
-option is used.
-
-@table @env
-@item -help
-@itemx -h
-List all options, with brief explanations.
-
-@item -symbols=@var{file}
-@itemx -s @var{file}
-Read symbol table from file @var{file}.
-
-@item -write
-Enable writing into executable and core files.
-
-@item -exec=@var{file}
-@itemx -e @var{file}
-Use file @var{file} as the executable file to execute when
-appropriate, and for examining pure data in conjunction with a core
-dump.
-
-@item -se=@var{file}
-Read symbol table from file @var{file} and use it as the executable
-file.
-
-@item -core=@var{file}
-@itemx -c @var{file}
-Use file @var{file} as a core dump to examine.
-
-@item -command=@var{file}
-@itemx -x @var{file}
-Execute @value{GDBN} commands from file @var{file}.
-
-@item -ex @var{command}
-Execute given @value{GDBN} @var{command}.
-
-@item -directory=@var{directory}
-@itemx -d @var{directory}
-Add @var{directory} to the path to search for source files.
-
-@item -nh
-Do not execute commands from @file{~/.gdbinit}.
-
-@item -nx
-@itemx -n
-Do not execute commands from any @file{.gdbinit} initialization files.
-
-@item -quiet
-@itemx -q
-``Quiet''. Do not print the introductory and copyright messages. These
-messages are also suppressed in batch mode.
-
-@item -batch
-Run in batch mode. Exit with status @code{0} after processing all the command
-files specified with @option{-x} (and @file{.gdbinit}, if not inhibited).
-Exit with nonzero status if an error occurs in executing the @value{GDBN}
-commands in the command files.
-
-Batch mode may be useful for running @value{GDBN} as a filter, for example to
-download and run a program on another computer; in order to make this
-more useful, the message
-
-@smallexample
-Program exited normally.
-@end smallexample
-
-@noindent
-(which is ordinarily issued whenever a program running under @value{GDBN} control
-terminates) is not issued when running in batch mode.
-
-@item -cd=@var{directory}
-Run @value{GDBN} using @var{directory} as its working directory,
-instead of the current directory.
-
-@item -fullname
-@itemx -f
-Emacs sets this option when it runs @value{GDBN} as a subprocess. It tells
-@value{GDBN} to output the full file name and line number in a standard,
-recognizable fashion each time a stack frame is displayed (which
-includes each time the program stops). This recognizable format looks
-like two @samp{\032} characters, followed by the file name, line number
-and character position separated by colons, and a newline. The
-Emacs-to-@value{GDBN} interface program uses the two @samp{\032}
-characters as a signal to display the source code for the frame.
-
-@item -b @var{bps}
-Set the line speed (baud rate or bits per second) of any serial
-interface used by @value{GDBN} for remote debugging.
-
-@item -tty=@var{device}
-Run using @var{device} for your program's standard input and output.
-@end table
-@c man end
+@xref{Invoking GDB}, for options.
@c man begin SEEALSO gdb
@ifset man