This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
Re: [PATCH] testsuite/gdb.dwarf2: Enable dw2-error.exp tests for arm targets
- From: Omair Javaid <omair dot javaid at linaro dot org>
- To: Tom Tromey <tromey at redhat dot com>
- Cc: gdb-patches at sourceware dot org, Patch Tracking <patches at linaro dot org>
- Date: Thu, 26 Sep 2013 16:12:45 +0500
- Subject: Re: [PATCH] testsuite/gdb.dwarf2: Enable dw2-error.exp tests for arm targets
- Authentication-results: sourceware.org; auth=none
- References: <CANW4E-2JhgU6rNJApL8g_yB1EWWMXKodsbbk9Pwt76e=SKGsMA at mail dot gmail dot com> <87li4y7f69 dot fsf at fleche dot redhat dot com> <CANW4E-18_+FikhAR0tfE7-1vNuMLCiQEybgsdJhZk-UHrW_-ng at mail dot gmail dot com> <87k3icsln0 dot fsf at fleche dot redhat dot com>
dw2-error.exp tests dwarf debug information version and passes if a
valid version is found. Its not run for arm targets because this test
has been written in x86 assembly language. A patch was submitted
adding debug information written with arm assembly in dw2-error.2.
Upstream suggestion was to re-write the test using dwarf assembler in
order to make it architecture independent. This patch implements
dw2-error.exp using dwarf assembler and removes dw2-error.S which is
now redundant as every time test runs new dw2-error.S will be
generated by dwarf assembler according to host architecture. This
patch has been tested on x86_64 and arm machines.
gdb/testsuite/ChangeLog:
2013-09-26 Omair Javaid <Omair.Javaid@linaro.org>
* gdb.dwarf2/dw2-error.exp: Re-written using dwarf assembler
* gdb.dwarf2/dw2-error.S: Delete
gdb/testsuite/gdb.dwarf2/dw2-error.S | 160 --------------------------------
gdb/testsuite/gdb.dwarf2/dw2-error.exp | 27 +++++-
2 files changed, 23 insertions(+), 164 deletions(-)
delete mode 100644 gdb/testsuite/gdb.dwarf2/dw2-error.S
diff --git a/gdb/testsuite/gdb.dwarf2/dw2-error.S
b/gdb/testsuite/gdb.dwarf2/dw2-error.S
deleted file mode 100644
index 597753e..0000000
--- a/gdb/testsuite/gdb.dwarf2/dw2-error.S
+++ /dev/null
@@ -1,160 +0,0 @@
-/* Copyright (C) 2012-2013 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-
- This was created using gcc -g -dA dw2-error.c, then hand-editing
- it to change the DWARF version.
-
- */
-
- .file "dw2-error.c"
- .text
-.Ltext0:
- .globl main
- .type main, @function
-main:
-.LFB0:
- .file 1 "dw2-error.c"
- # dw2-error.c:19
- .loc 1 19 0
- .cfi_startproc
- # basic block 2
- pushq %rbp
- .cfi_def_cfa_offset 16
- .cfi_offset 6, -16
- movq %rsp, %rbp
- .cfi_def_cfa_register 6
- # dw2-error.c:20
- .loc 1 20 0
- movl $23, %eax
- # dw2-error.c:21
- .loc 1 21 0
- popq %rbp
- .cfi_def_cfa 7, 8
- ret
- .cfi_endproc
-.LFE0:
- .size main, .-main
-.Letext0:
- .section .debug_info,"",@progbits
-.Ldebug_info0:
- .long 0x4e # Length of Compilation Unit Info
- .value 0x99 # DWARF version number
- .long .Ldebug_abbrev0 # Offset Into Abbrev. Section
- .byte 0x8 # Pointer Size (in bytes)
- .uleb128 0x1 # (DIE (0xb) DW_TAG_compile_unit)
- .long .LASF0 # DW_AT_producer: "GNU C 4.6.3 20120306 (Red Hat
4.6.3-2) -mtune=generic -march=x86-64 -g"
- .byte 0x1 # DW_AT_language
- .long .LASF1 # DW_AT_name: "dw2-error.c"
- .long .LASF2 # DW_AT_comp_dir: "/tmp"
- .quad .Ltext0 # DW_AT_low_pc
- .quad .Letext0 # DW_AT_high_pc
- .long .Ldebug_line0 # DW_AT_stmt_list
- .uleb128 0x2 # (DIE (0x2d) DW_TAG_subprogram)
- # DW_AT_external
- .long .LASF3 # DW_AT_name: "main"
- .byte 0x1 # DW_AT_decl_file (dw2-error.c)
- .byte 0x12 # DW_AT_decl_line
- .long 0x4a # DW_AT_type
- .quad .LFB0 # DW_AT_low_pc
- .quad .LFE0 # DW_AT_high_pc
- .uleb128 0x1 # DW_AT_frame_base
- .byte 0x9c # DW_OP_call_frame_cfa
- # DW_AT_GNU_all_call_sites
- .uleb128 0x3 # (DIE (0x4a) DW_TAG_base_type)
- .byte 0x4 # DW_AT_byte_size
- .byte 0x5 # DW_AT_encoding
- .ascii "int\0" # DW_AT_name
- .byte 0 # end of children of DIE 0xb
- .section .debug_abbrev,"",@progbits
-.Ldebug_abbrev0:
- .uleb128 0x1 # (abbrev code)
- .uleb128 0x11 # (TAG: DW_TAG_compile_unit)
- .byte 0x1 # DW_children_yes
- .uleb128 0x25 # (DW_AT_producer)
- .uleb128 0xe # (DW_FORM_strp)
- .uleb128 0x13 # (DW_AT_language)
- .uleb128 0xb # (DW_FORM_data1)
- .uleb128 0x3 # (DW_AT_name)
- .uleb128 0xe # (DW_FORM_strp)
- .uleb128 0x1b # (DW_AT_comp_dir)
- .uleb128 0xe # (DW_FORM_strp)
- .uleb128 0x11 # (DW_AT_low_pc)
- .uleb128 0x1 # (DW_FORM_addr)
- .uleb128 0x12 # (DW_AT_high_pc)
- .uleb128 0x1 # (DW_FORM_addr)
- .uleb128 0x10 # (DW_AT_stmt_list)
- .uleb128 0x17 # (DW_FORM_sec_offset)
- .byte 0
- .byte 0
- .uleb128 0x2 # (abbrev code)
- .uleb128 0x2e # (TAG: DW_TAG_subprogram)
- .byte 0 # DW_children_no
- .uleb128 0x3f # (DW_AT_external)
- .uleb128 0x19 # (DW_FORM_flag_present)
- .uleb128 0x3 # (DW_AT_name)
- .uleb128 0xe # (DW_FORM_strp)
- .uleb128 0x3a # (DW_AT_decl_file)
- .uleb128 0xb # (DW_FORM_data1)
- .uleb128 0x3b # (DW_AT_decl_line)
- .uleb128 0xb # (DW_FORM_data1)
- .uleb128 0x49 # (DW_AT_type)
- .uleb128 0x13 # (DW_FORM_ref4)
- .uleb128 0x11 # (DW_AT_low_pc)
- .uleb128 0x1 # (DW_FORM_addr)
- .uleb128 0x12 # (DW_AT_high_pc)
- .uleb128 0x1 # (DW_FORM_addr)
- .uleb128 0x40 # (DW_AT_frame_base)
- .uleb128 0x18 # (DW_FORM_exprloc)
- .uleb128 0x2117 # (DW_AT_GNU_all_call_sites)
- .uleb128 0x19 # (DW_FORM_flag_present)
- .byte 0
- .byte 0
- .uleb128 0x3 # (abbrev code)
- .uleb128 0x24 # (TAG: DW_TAG_base_type)
- .byte 0 # DW_children_no
- .uleb128 0xb # (DW_AT_byte_size)
- .uleb128 0xb # (DW_FORM_data1)
- .uleb128 0x3e # (DW_AT_encoding)
- .uleb128 0xb # (DW_FORM_data1)
- .uleb128 0x3 # (DW_AT_name)
- .uleb128 0x8 # (DW_FORM_string)
- .byte 0
- .byte 0
- .byte 0
- .section .debug_aranges,"",@progbits
- .long 0x2c # Length of Address Ranges Info
- .value 0x2 # DWARF Version
- .long .Ldebug_info0 # Offset of Compilation Unit Info
- .byte 0x8 # Size of Address
- .byte 0 # Size of Segment Descriptor
- .value 0 # Pad to 16 byte boundary
- .value 0
- .quad .Ltext0 # Address
- .quad .Letext0-.Ltext0 # Length
- .quad 0
- .quad 0
- .section .debug_line,"",@progbits
-.Ldebug_line0:
- .section .debug_str,"MS",@progbits,1
-.LASF0:
- .string "GNU C 4.6.3 20120306 (Red Hat 4.6.3-2) -mtune=generic
-march=x86-64 -g"
-.LASF2:
- .string "/tmp"
-.LASF3:
- .string "main"
-.LASF1:
- .string "dw2-error.c"
- .ident "GCC: (GNU) 4.6.3 20120306 (Red Hat 4.6.3-2)"
- .section .note.GNU-stack,"",@progbits
diff --git a/gdb/testsuite/gdb.dwarf2/dw2-error.exp
b/gdb/testsuite/gdb.dwarf2/dw2-error.exp
index d0baeea..36596d2 100644
--- a/gdb/testsuite/gdb.dwarf2/dw2-error.exp
+++ b/gdb/testsuite/gdb.dwarf2/dw2-error.exp
@@ -20,14 +20,33 @@ if {![dwarf2_support]} {
return 0
}
-standard_testfile .S
+standard_testfile .c dw2-error.S
-# We can't use prepare_for_testing here because we need to check the
-# 'file' command's output.
-if {[build_executable $testfile.exp $testfile $srcfile {nodebug}]} {
+# Make some DWARF for the test.
+set asm_file [standard_output_file $srcfile2]
+Dwarf::assemble $asm_file {
+
+ cu 0 153 8 {
+ compile_unit {{language @DW_LANG_C}}
+ }
+}
+
+if {[gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile}1.o \
+ object {nodebug}] != ""} {
+ return -1
+}
+
+if {[gdb_compile $asm_file ${binfile}2.o object {nodebug}] != ""} {
return -1
}
+if {[gdb_compile [list ${binfile}1.o ${binfile}2.o ] \
+ "${binfile}" executable {}] != ""} {
+ return -1
+}
+
+clean_restart ${testfile}
+
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
--
On 19 September 2013 23:37, Tom Tromey <tromey@redhat.com> wrote:
>>>>>> "Omair" == Omair Javaid <omair.javaid@linaro.org> writes:
>
> Omair> Can you kindly direct me to DWARF assembler and how can I use to write
> Omair> the above testcase.
>
> The DWARF assembler is in gdb/testsuite/lib/dwarf.exp.
> It has a large comment that explains most of how to use it;
> plus a few specific comments next to some exported procs.
> Search gdb.dwarf2 for Dwarf::assemble for some examples.
>
> In this case I think the test case is just testing that gdb reacts
> properly when the DWARF has an invalid version. This is simple to do
> with the assembler; just pass something unusual to the "cu" proc.
>
> Tom