This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
RE: [PATCH] Allow user-defined as a category for python gdb macros (resend)
Ping.
I think all the reviewers (Phil, Doug, Eli) were ok with this most recent revision based on the comments. I would be happy to do further cleanup if necessary. Otherwise, could this committed whenever someone gets a chance?
thanks!
-sjg
> -----Original Message-----
> From: Scott Goldman
> Sent: Wednesday, February 22, 2012 11:52 PM
> To: Doug Evans
> Cc: Phil Muldoon; eliz@gnu.org; gdb-patches@sourceware.org
> Subject: RE: [PATCH] Allow user-defined as a category for python gdb
> macros (resend)
>
> > Hi Doug.
> >
> >> Have you tested this? And is the entire docstring printed or just
> the
> >> first line?
> >> [Guessing, I think it'll be just the first line, in which case I'd
> >> reword that and just say the first line of the documentation or
> >> docstring is included (if any). Or whatever.]
> >
> > I verified it, and you were right. I adjusted the documentation as
> per your suggestion. All the python commands we're using currently have
> one line docstrings, so it didn't even occur to me.
>
> Err.. on second thought, I like Doug's wording better.
>
> thanks,
> -sjg
> --
> gdb/doc/ChangeLog
> 2012-02-15 Scott J. Goldman <scottjg@vmware.com>
>
> * gdb.texinfo (Commands In Python): Put example python macro in
> COMMAND_USER category rather than COMMAND_OBSCURE.
> (User-defined Commands) : Update documentation to clarify
> `set/show max-user-call-depth` and `show user` don't apply to
> python
> commands.
> (User-defined Commands) : Update documentation to clarify
> `help user-defined` may also include python commands defined as
> COMMAND_USER
>
> gdb/ChangLog
> 2012-02-15 Scott J. Goldman <scottjg@vmware.com>
>
> * cli/cli-cmds.c (show_user): Print error when used on a python
> command.
> (init_cli_cmds): Update documentation strings for `show user`
> and
> `set/show max-user-call-depth` to clarify that it does not
> apply to
> python commands.
> * python/py-cmd.c (cmdpy_init): Treat class_user as a valid
> class in error
> check
> (gdbpy_initialize_commands): Add COMMAND_USER as a constant in
> gdb python api.
> * top.c (execute_command): Only execute a user-defined command
> as a
> legacy macro if c->user_commands is set.
>
> gdb/testsuite/ChangeLog
> 2012-02-15 Scott J. Goldman <scottjg@vmware.com>
>
> * gdb.python/py-cmd.exp: Add test to verify that python
> commands can
> be put in the user-defined category and that the commands
> appear in
> `help user-defined`.
>
> diff --git a/gdb/cli/cli-cmds.c b/gdb/cli/cli-cmds.c
> index 983f017..49808b6 100644
> --- a/gdb/cli/cli-cmds.c
> +++ b/gdb/cli/cli-cmds.c
> @@ -1241,7 +1241,8 @@ show_user (char *args, int from_tty)
> char *comname = args;
>
> c = lookup_cmd (&comname, cmdlist, "", 0, 1);
> - if (c->class != class_user)
> + /* c->user_commands would be NULL if it's a python command */
> + if (c->class != class_user || !c->user_commands)
> error (_("Not a user command."));
> show_user_1 (c, "", args, gdb_stdout);
> }
> @@ -1912,7 +1913,7 @@ Two arguments (separated by a comma) are taken as
> a range of memory to dump,\n\
> Run the ``make'' program using the rest of the line as arguments."));
> set_cmd_completer (c, filename_completer);
> add_cmd ("user", no_class, show_user, _("\
> -Show definitions of user defined commands.\n\
> +Show definitions of non-python user defined commands.\n\
> Argument is the name of the user defined command.\n\
> With no argument, show definitions of all user defined commands."),
> &showlist);
> add_com ("apropos", class_support, apropos_command,
> @@ -1920,8 +1921,8 @@ With no argument, show definitions of all user
> defined commands."), &showlist);
>
> add_setshow_integer_cmd ("max-user-call-depth", no_class,
> &max_user_call_depth, _("\
> -Set the max call depth for user-defined commands."), _("\
> -Show the max call depth for user-defined commands."), NULL,
> +Set the max call depth for non-python user-defined commands."), _("\
> +Show the max call depth for non-python user-defined commands."), NULL,
> NULL,
> show_max_user_call_depth,
> &setlist, &showlist);
> diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
> index 9edc6ad..eee343a 100644
> --- a/gdb/doc/gdb.texinfo
> +++ b/gdb/doc/gdb.texinfo
> @@ -21053,15 +21053,18 @@ command should not be repeated when the user
> hits @key{RET}
>
> @kindex help user-defined
> @item help user-defined
> -List all user-defined commands, with the first line of the
> documentation
> -(if any) for each.
> +List all user-defined commands and all python commands defined in
> class
> +COMAND_USER. The first line of the documentation or docstring is
> +included (if any).
>
> @kindex show user
> @item show user
> @itemx show user @var{commandname}
> Display the @value{GDBN} commands used to define @var{commandname}
> (but
> not its documentation). If no @var{commandname} is given, display the
> -definitions for all user-defined commands.
> +definitions for all user-defined commands. This does not work for
> user-defined
> +python commands.
>
> @cindex infinite recursion in user-defined commands
> @kindex show max-user-call-depth
> @@ -21070,7 +21073,8 @@ definitions for all user-defined commands.
> @itemx set max-user-call-depth
> The value of @code{max-user-call-depth} controls how many recursion
> levels are allowed in user-defined commands before @value{GDBN}
> suspects an
> -infinite recursion and aborts the command.
> +infinite recursion and aborts the command. This does not apply to
> user-defined
> +python commands.
> @end table
>
> In addition to the above commands, user-defined commands frequently
> @@ -21871,7 +21875,7 @@ to handle this case. Example:
> >class HelloWorld (gdb.Command):
> > """Greet the whole world."""
> > def __init__ (self):
> -> super (HelloWorld, self).__init__ ("hello-world",
> gdb.COMMAND_OBSCURE)
> +> super (HelloWorld, self).__init__ ("hello-world",
> gdb.COMMAND_USER)
> > def invoke (self, args, from_tty):
> > argv = gdb.string_to_argv (args)
> > if len (argv) != 0:
> @@ -23311,7 +23315,7 @@ class HelloWorld (gdb.Command):
> """Greet the whole world."""
>
> def __init__ (self):
> - super (HelloWorld, self).__init__ ("hello-world",
> gdb.COMMAND_OBSCURE)
> + super (HelloWorld, self).__init__ ("hello-world",
> gdb.COMMAND_USER)
>
> def invoke (self, arg, from_tty):
> print "Hello, World!"
> diff --git a/gdb/python/py-cmd.c b/gdb/python/py-cmd.c
> index aad1ab4..04476db 100644
> --- a/gdb/python/py-cmd.c
> +++ b/gdb/python/py-cmd.c
> @@ -436,7 +436,7 @@ cmdpy_init (PyObject *self, PyObject *args,
> PyObject *kw)
> && cmdtype != class_files && cmdtype != class_support
> && cmdtype != class_info && cmdtype != class_breakpoint
> && cmdtype != class_trace && cmdtype != class_obscure
> - && cmdtype != class_maintenance)
> + && cmdtype != class_maintenance && cmdtype != class_user)
> {
> PyErr_Format (PyExc_RuntimeError, _("Invalid command class
> argument."));
> return -1;
> @@ -578,7 +578,8 @@ gdbpy_initialize_commands (void)
> || PyModule_AddIntConstant (gdb_module, "COMMAND_OBSCURE",
> class_obscure) < 0
> || PyModule_AddIntConstant (gdb_module, "COMMAND_MAINTENANCE",
> - class_maintenance) < 0)
> + class_maintenance) < 0
> + || PyModule_AddIntConstant (gdb_module, "COMMAND_USER",
> class_user) < 0)
> return;
>
> for (i = 0; i < N_COMPLETERS; ++i)
> diff --git a/gdb/testsuite/gdb.python/py-cmd.exp
> b/gdb/testsuite/gdb.python/py-cmd.exp
> index fc7cac0..36fa343 100644
> --- a/gdb/testsuite/gdb.python/py-cmd.exp
> +++ b/gdb/testsuite/gdb.python/py-cmd.exp
> @@ -138,3 +138,20 @@ gdb_test "python print gdb.string_to_argv ('\"1
> 2\" 3')" \
> gdb_test "python print gdb.string_to_argv ('1\\ 2 3')" \
> {\['1 2', '3'\]} \
> "string_to_argv ('1\\ 2 3')"
> +
> +# Test user-defined python commands.
> +gdb_py_test_multiple "input simple user-defined command" \
> + "python" "" \
> + "class test_help (gdb.Command):" "" \
> + " \"\"\"Docstring\"\"\"" "" \
> + " def __init__ (self):" "" \
> + " super (test_help, self).__init__ (\"test_help\",
> gdb.COMMAND_USER)" "" \
> + " def invoke (self, arg, from_tty):" "" \
> + " print \"test_cmd output, arg = %s\" % arg" "" \
> + "test_help ()" "" \
> + "end" ""
> +
> +gdb_test "test_help ugh" "test_cmd output, arg = ugh" "call simple
> user-defined command"
> +
> +# Make sure the command shows up in `help user-defined`.
> +gdb_test "help user-defined" "User-defined commands.\[\r\n\]+The
> commands in this class are those defined by the user.\[\r\n\]+Use the
> \"define\" command to define a command.\[\r\n\]+\[\r\n\]+List of
> commands:\[\r\n\]+\[\r\n\]+test_help -- Docstring\[\r\n\]+\[\r\n\]+Type
> \"help\" followed by command name for full documentation.\[\r\n\]+Type
> \"apropos word\" to search for commands related to
> \"word\".\[\r\n\]+Command name abbreviations are allowed if
> unambiguous.\[\r\n\]+" "see user-defined command in `help user-
> defined`"
> diff --git a/gdb/top.c b/gdb/top.c
> index e41f56c..e73a772 100644
> --- a/gdb/top.c
> +++ b/gdb/top.c
> @@ -470,7 +470,8 @@ execute_command (char *p, int from_tty)
> if (c->flags & DEPRECATED_WARN_USER)
> deprecated_cmd_warning (&line);
>
> - if (c->class == class_user)
> + /* c->user_commands would be NULL in the case of a python
> command. */
> + if (c->class == class_user && c->user_commands)
> execute_user_command (c, arg);
> else if (c->type == set_cmd || c->type == show_cmd)
> do_setshow_command (arg, from_tty, c);