This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
Re: [rfa/rfc] Build libcommon.a for gdb and gdbserver
- From: Pedro Alves <pedro at codesourcery dot com>
- To: Tom Tromey <tromey at redhat dot com>
- Cc: Yao Qi <yao at codesourcery dot com>, gdb-patches at sourceware dot org
- Date: Wed, 23 Feb 2011 18:33:46 +0000
- Subject: Re: [rfa/rfc] Build libcommon.a for gdb and gdbserver
- References: <4D30E23F.3080103@codesourcery.com> <m3oc62k8wy.fsf@fleche.redhat.com> <m3fwrek6kx.fsf@fleche.redhat.com>
On Wednesday 23 February 2011 17:23:58, Tom Tromey wrote:
> >>>>> "Tom" == Tom Tromey <tromey@redhat.com> writes:
>
> Tom> What do you think of that? I may write a patch to do it.
>
> It was simpler than I thought.
I'm confused. How is this different from reverting Yao's original patch?
>
> The downside of this approach is that changes in common/ mean updating
> two Makefiles, not just one. I think this is an ok tradeoff for getting
> rid of a configure script plus the associated rules.
>
> Tom
>
> 2011-02-23 Tom Tromey <tromey@redhat.com>
>
> * configure: Rebuild.
> * configure.ac: Don't configure in common.
> * Makefile.in (LIBCOMMON_DIR, LIBCOMMON, LIBCOMMON_SRC): Remove.
> (CLIBS, CDEPS): Don't use LIBCOMMON.
> (COMMON_OBS): Add signals.o.
> ($(LIBCOMMON), configure-common, common/Makefile): Remove.
> (signals.o): New target.
> * common/Makefile.in: Remove.
> * common/configure.ac: Remove.
> * common/configure: Remove.
> * common/aclocal.m4: Remove.
>
> 2011-02-23 Tom Tromey <tromey@redhat.com>
>
> * Makefile.in (SFILES): Add signals.c.
> (LIBCOMMON, LIBCOMMON_DIR, LIBCOMMON_SRC): Remove.
> (OBS): Add signals.o.
> ($(LIBCOMMON), common/Makefile, configure-common): Remove.
> (gdbserver$(EXEEXT)): Don't use LIBCOMMON.
> (COMMON_CFLAGS): New variable.
> (signals.o): New target.
>
> diff --git a/gdb/Makefile.in b/gdb/Makefile.in
> index 6363773..5e1c5c8 100644
> --- a/gdb/Makefile.in
> +++ b/gdb/Makefile.in
> @@ -142,10 +142,6 @@ LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
> LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
> LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
>
> -LIBCOMMON_DIR = common
> -LIBCOMMON = $(LIBCOMMON_DIR)/libcommon.a
> -LIBCOMMON_SRC = $(srcdir)/$(LIBCOMMON_DIR)
> -
> # Where is the READLINE library? Typically in ../readline.
> READLINE_DIR = ../readline
> READLINE_SRC = $(srcdir)/$(READLINE_DIR)
> @@ -473,10 +469,9 @@ INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_
> CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
> $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ @PYTHON_LIBS@ \
> $(LIBEXPAT) \
> - $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBCOMMON)
> + $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
> CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
> - $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU) \
> - $(LIBCOMMON)
> + $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
>
> ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
> ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
> @@ -892,7 +887,8 @@ COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
> prologue-value.o memory-map.o memrange.o xml-support.o xml-syscall.o \
> target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
> inferior.o osdata.o gdb_usleep.o record.o gcore.o \
> - jit.o progspace.o
> + jit.o progspace.o \
> + signals.o
>
> TSOBS = inflow.o
>
> @@ -1170,26 +1166,6 @@ all-lib: gnulib/Makefile
> @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=gnulib subdir_do
> .PHONY: all-lib
>
> -#
> -$(LIBCOMMON): $(LIBCOMMON_DIR)/Makefile
> - @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=common subdir_do
> -
> -configure-common:
> - @: $(MAKE); $(unstage)
> - @r=`${PWD_COMMAND}`; export r; \
> - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
> - test ! -f common/Makefile || exit 0; \
> - $(SHELL) $(srcdir)/../mkinstalldirs common ; \
> - $(HOST_EXPORTS) \
> - echo Configuring in common; \
> - cd "common" || exit 1; \
> - commondir="$$s/common"; \
> - srcdiroption="--srcdir=$${commondir}"; \
> - $(SHELL) $${commondir}/configure --enable-gdbserver=no \
> - $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \
> - --target=${target_alias} $${srcdiroption} \
> - || exit 1
> -
> # Convenience rule to handle recursion.
> .PHONY: all-data-directory
> all-data-directory: data-directory/Makefile
> @@ -1325,13 +1301,6 @@ data-directory/Makefile: data-directory/Makefile.in config.status @frags@
> CONFIG_LINKS= \
> $(SHELL) config.status
>
> -common/Makefile: configure-common common/Makefile.in config.status @frags@
> - CONFIG_FILES="common/Makefile" \
> - CONFIG_COMMANDS="depfiles" \
> - CONFIG_HEADERS= \
> - CONFIG_LINKS= \
> - $(SHELL) config.status
> -
> config.h: stamp-h ; @true
> stamp-h: $(srcdir)/config.in config.status
> CONFIG_HEADERS=config.h:config.in \
> @@ -2136,6 +2105,16 @@ py-value.o: $(srcdir)/python/py-value.c
> $(POSTCOMPILE)
>
> #
> +# gdb/common/ dependencies.
> +#
> +# Need to explicitly specify the compile rule as make will do nothing
> +# or try to compile the object file into the sub-directory.
> +
> +signals.o: $(srcdir)/common/signals.c
> + $(COMPILE) $(srcdir)/common/signals.c
> + $(POSTCOMPILE)
> +
> +#
> # Dependency tracking. Most of this is conditional on GNU Make being
> # found by configure; if GNU Make is not found, we fall back to a
> # simpler scheme.
> diff --git a/gdb/configure.ac b/gdb/configure.ac
> index f31ef2a..d2b75f6 100644
> --- a/gdb/configure.ac
> +++ b/gdb/configure.ac
> @@ -109,7 +109,6 @@ AS_HELP_STRING([--with-relocated-sources=PATH], [automatically relocate this pat
> ])
>
> AC_CONFIG_SUBDIRS(testsuite)
> -AC_CONFIG_SUBDIRS(common)
>
> # Check whether to support alternative target configurations
> AC_ARG_ENABLE(targets,
> diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in
> index 352f4f1..f2daaac 100644
> --- a/gdb/gdbserver/Makefile.in
> +++ b/gdb/gdbserver/Makefile.in
> @@ -126,22 +126,20 @@ SFILES= $(srcdir)/gdbreplay.c $(srcdir)/inferiors.c \
> $(srcdir)/linux-xtensa-low.c \
> $(srcdir)/win32-arm-low.c $(srcdir)/win32-i386-low.c \
> $(srcdir)/win32-low.c $(srcdir)/wincecompat.c \
> - $(srcdir)/hostio.c $(srcdir)/hostio-errno.c
> + $(srcdir)/hostio.c $(srcdir)/hostio-errno.c \
> + $(srcdir)/../common/signals.c
>
> DEPFILES = @GDBSERVER_DEPFILES@
>
> LIBOBJS = @LIBOBJS@
>
> -LIBCOMMON_DIR = common
> -LIBCOMMON = $(LIBCOMMON_DIR)/libcommon.a
> -LIBCOMMON_SRC = $(srcdir)/$(LIBCOMMON_DIR)
> -
> SOURCES = $(SFILES)
> TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS}
>
> OBS = inferiors.o regcache.o remote-utils.o server.o target.o \
> utils.o version.o \
> mem-break.o hostio.o event-loop.o tracepoint.o \
> + signals.o \
> $(XML_BUILTIN) \
> $(DEPFILES) $(LIBOBJS)
> GDBREPLAY_OBS = gdbreplay.o version.o
> @@ -196,32 +194,6 @@ FLAGS_TO_PASS = \
>
> all: gdbserver$(EXEEXT) gdbreplay$(EXEEXT) $(extra_libraries)
>
> -$(LIBCOMMON): $(LIBCOMMON_DIR)/Makefile
> - @$(MAKE) $(FLAGS_TO_PASS) DO=all --directory=common
> -
> -common/Makefile: configure-common config.status
> - CONFIG_FILES="common/Makefile" \
> - CONFIG_COMMANDS="depfiles" \
> - CONFIG_HEADERS= \
> - CONFIG_LINKS= \
> - $(SHELL) config.status
> -
> -configure-common:
> - @: $(MAKE); $(unstage)
> - @r=`${PWD_COMMAND}`; export r; \
> - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
> - test ! -f common/Makefile || exit 0; \
> - $(SHELL) $(srcdir)/../../mkinstalldirs common ; \
> - $(HOST_EXPORTS) \
> - echo Configuring in common; \
> - cd "common" || exit 1; \
> - commondir="$$s/../common"; \
> - srcdiroption="--srcdir=$${commondir}"; \
> - $(SHELL) $${commondir}/configure --enable-gdbserver=yes \
> - $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \
> - --target=${target_alias} $${srcdiroption} \
> - || exit 1
> -
> # Traditionally "install" depends on "all". But it may be useful
> # not to; for example, if the user has made some trivial change to a
> # source file and doesn't care about rebuilding or just wants to save the
> @@ -256,10 +228,10 @@ html:
> install-html:
> clean-info:
>
> -gdbserver$(EXEEXT): $(OBS) ${ADD_DEPS} ${CDEPS} $(LIBCOMMON)
> +gdbserver$(EXEEXT): $(OBS) ${ADD_DEPS} ${CDEPS}
> rm -f gdbserver$(EXEEXT)
> ${CC-LD} $(INTERNAL_CFLAGS) $(INTERNAL_LDFLAGS) -o gdbserver$(EXEEXT) $(OBS) \
> - $(LIBCOMMON) $(GDBSERVER_LIBS) $(XM_CLIBS)
> + $(GDBSERVER_LIBS) $(XM_CLIBS)
>
> gdbreplay$(EXEEXT): $(GDBREPLAY_OBS)
> rm -f gdbreplay$(EXEEXT)
> @@ -414,6 +386,11 @@ tracepoint.o: tracepoint.c $(server_h) $(srcdir)/../common/ax.def
> utils.o: utils.c $(server_h)
> gdbreplay.o: gdbreplay.c config.h
>
> +COMMON_CFLAGS = $(CPPFLAGS) $(INTERNAL_CFLAGS) -DGDBSERVER
> +
> +signals.o: $(srcdir)/../common/signals.c $(server_h) $(signals_h)
> + $(CC) -c $(COMMON_CFLAGS) $< -o signals.o
> +
> # We build memmem.c without -Werror because this file is not under
> # our control. On LynxOS, the compiler generates some warnings
> # because str-two-way.h uses a constant (MAX_SIZE) whose definition
>
--
Pedro Alves