This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
Re: [patch] Support inferior events in python
The attached patch incorporates fixes requested by Jan, Joel, and Pedro:
- Use gdb_test_multiple.
- Check the return value of gdb_compile_pthreads.
- Remove incorrect comment about pretty printing.
- Test that non-stop is supported.
- Fix test intermittent failure on i386.
Where applicable these fixes were also applied to other related tests.
Sami
Fix non-stop Python event tests.
2011-02-14 Sami Wagiaalla <swagiaal@redhat.com>
* gdb.python/py-evsignal.exp: New file.
* gdb.python/py-evthreads.cc: Initialize bad pointer
to NULL.
* gdb.python/py-events.exp: Remove pretty printing
comment.
* gdb.python/py-evthreads.exp: Ditto.
Use gdb_test_multiple.
diff --git a/gdb/testsuite/gdb.python/py-events.exp b/gdb/testsuite/gdb.python/py-events.exp
index e5d6daf..8493809 100644
--- a/gdb/testsuite/gdb.python/py-events.exp
+++ b/gdb/testsuite/gdb.python/py-events.exp
@@ -13,11 +13,6 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# This file is part of the GDB testsuite. It tests Python-based
-# pretty-printing for the CLI.
-
-# Skip all tests if Python scripting is not enabled.
-
if $tracelevel then {
strace $tracelevel
}
diff --git a/gdb/testsuite/gdb.python/py-evsignal.exp b/gdb/testsuite/gdb.python/py-evsignal.exp
new file mode 100644
index 0000000..ae67a12
--- /dev/null
+++ b/gdb/testsuite/gdb.python/py-evsignal.exp
@@ -0,0 +1,49 @@
+# Copyright (C) 2010, 2011 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+if $tracelevel then {
+ strace $tracelevel
+}
+
+load_lib gdb-python.exp
+
+set testfile "py-evthreads"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+set pyfile ${srcdir}/${subdir}/py-events.py
+
+if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+ return -1
+}
+clean_restart $testfile
+
+if { [skip_python_tests] } { continue }
+
+gdb_test_no_output "python execfile ('${pyfile}')" ""
+
+gdb_test "Test_Events" "Event testers registered."
+gdb_test_no_output "set non-stop on"
+gdb_test_no_output "set target-async on"
+
+gdb_breakpoint [gdb_get_line_number "end of main"]
+
+gdb_test_multiple "run" "Signal Thread 3" {
+ -re ".*stop reason: signal.*stop signal: SIGSEGV.*thread num: 3.*" {
+ pass "thread 3 was signaled"
+ }
+ -re "The target does not support running in non-stop mode" {
+ unsupported "non-stop mode is unsupported"
+ }
+}
diff --git a/gdb/testsuite/gdb.python/py-evthreads.c b/gdb/testsuite/gdb.python/py-evthreads.c
index 1464ce6..55414ed 100644
--- a/gdb/testsuite/gdb.python/py-evthreads.c
+++ b/gdb/testsuite/gdb.python/py-evthreads.c
@@ -28,7 +28,7 @@ void* thread3 (void* d)
int count3 = 0;
count3++;
- int *bad;
+ int *bad = NULL;
*bad = 1;
return NULL;
@@ -46,10 +46,10 @@ int main (){
pthread_create (&thread2_id, NULL, thread2, NULL);
pthread_create (&thread3_id, NULL, thread3, NULL);
- int count1 = 0; // stop1
+ int count1 = 0;
count1++;
pthread_join (thread2_id, NULL);
pthread_join (thread3_id, NULL);
- return 12;
+ return 12; // end of main
}
diff --git a/gdb/testsuite/gdb.python/py-evthreads.exp b/gdb/testsuite/gdb.python/py-evthreads.exp
index 6ea7eb4..aadacd0 100644
--- a/gdb/testsuite/gdb.python/py-evthreads.exp
+++ b/gdb/testsuite/gdb.python/py-evthreads.exp
@@ -13,11 +13,6 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# This file is part of the GDB testsuite. It tests Python-based
-# pretty-printing for the CLI.
-
-# Skip all tests if Python scripting is not enabled.
-
if $tracelevel then {
strace $tracelevel
}
@@ -29,7 +24,9 @@ set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
set pyfile ${srcdir}/${subdir}/py-events.py
-gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}
+if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+ return -1
+}
clean_restart $testfile
if { [skip_python_tests] } { continue }
@@ -44,76 +41,38 @@ gdb_breakpoint "main"
gdb_breakpoint "thread2"
gdb_breakpoint "thread3"
-send_gdb "run\n"
-gdb_expect {
- -re "event type: stop.*
-.*stop reason: breakpoint.*
-.*breakpoint number: 1.*
-.*thread num: 1.*" {
+gdb_test_multiple "run" "Run to breakpoint 1" {
+ -re "event type: stop.*stop reason: breakpoint.*breakpoint number: 1.*thread num: 1.*" {
pass "reached breakpoint 1"
}
- timeout {
- fail "did not reach breakpoint 1"
- }
+ -re "The target does not support running in non-stop mode" {
+ unsupported "non-stop mode is unsupported"
+ return
+ }
}
-send_gdb "next\n"
-gdb_expect {
- -re "event type: stop.*
-.*stop reason: breakpoint.*
-.*breakpoint number: 2.*
-.*thread num: 2.*" {
+gdb_test_multiple "next" "Run to breakpoint 2" {
+ -re "event type: stop.*stop reason: breakpoint.*breakpoint number: 2.*thread num: 2.*" {
pass "reached breakpoint 2"
}
- timeout {
- fail "did not reach breakpoint 2"
- }
}
-send_gdb "next\n"
-gdb_expect {
- -re "event type: stop.*
-.*stop reason: breakpoint.*
-.*breakpoint number: 3.*
-.*thread num: 3.*" {
+gdb_test_multiple "next" "Run to breakpoint 3" {
+ -re "event type: stop.*stop reason: breakpoint.*breakpoint number: 3.*thread num: 3.*" {
pass "reached breakpoint 3"
}
- timeout {
- fail "did not reach breakpoint 3"
- }
}
-send_gdb "continue&\n"
-gdb_expect {
- -re ".*event type: continue.*
-.*thread num: 1.*" {
+gdb_test_multiple "continue&" "Continue thread 1" {
+ -re ".*event type: continue.*thread num: 1.*" {
pass "continue thread 1"
}
- timeout {
- fail "continue thread 1 failed"
- }
}
gdb_test "thread 2" ".*Switching to thread 2.*"
-send_gdb "continue&\n"
-gdb_expect {
- -re ".*event type: continue.*
-.*thread num: 2.*" {
- pass "continue thread 2"
- }
- timeout {
- fail "continue thread 2 failed"
- }
-}
-send_gdb "continue -a\n"
-gdb_expect {
- -re ".*stop reason: signal.*
-.*stop signal: SIGSEGV.*
-.*thread num: 3.*" {
- pass "thread 3 was signalled"
+gdb_test_multiple "continue&" "Continue thread 2" {
+ -re ".*event type: continue.*thread num: 2.*" {
+ pass "continue thread 1"
}
- timeout {
- fail "thread 3 was not signalled"
- }
}