This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
Re: [PATCH] prec: add a switch for memory doesn't record query
Some words in the doc is not very well. Did some small change.
2010-06-18 Hui Zhu <teawater@gmail.com>
* i386-tdep.c (i386_record_lea_modrm): Change warning to query.
(i386_process_record): Ditto.
* record.c (record_memory_query): New variable.
(_initialize_record): New command "set record memory-query".
* record.h (record_memory_query): New extern.
2010-06-18 Hui Zhu <teawater@gmail.com>
* gdb.texinfo: (Process Record and Replay): Add documentation
for command "set record memory-query".
---
doc/gdb.texinfo | 13 +++++++
i386-tdep.c | 97 ++++++++++++++++++++++++++++++++++++++++----------------
linux-record.c | 25 ++++++++------
record.c | 15 ++++++++
record.h | 1
5 files changed, 115 insertions(+), 36 deletions(-)
--- a/doc/gdb.texinfo
+++ b/doc/gdb.texinfo
@@ -5676,6 +5676,19 @@ oldest record to make room for each new
@item show record stop-at-limit
Show the current setting of @code{stop-at-limit}.
+@kindex set record memory-query
+@item set record memory-query
+Control the behavior when PREC cannot record memory change of next
+instruction. If ON, @value{GDBN} will query when it cannot record
+memory change of next instruction.
+
+If this option is OFF(the default), @value{GDBN} will auto ignore this
+issue. It can handle it with itself.
+
+@kindex show record memory-query
+@item show record memory-query
+Show the current setting of @code{memory-query}.
+
@kindex info record
@item info record
Show various statistics about the state of process record and its
--- a/i386-tdep.c
+++ b/i386-tdep.c
@@ -3461,10 +3461,21 @@ i386_record_lea_modrm (struct i386_recor
if (irp->override >= 0)
{
- warning (_("Process record ignores the memory change "
- "of instruction at address %s because it "
- "can't get the value of the segment register."),
- paddress (gdbarch, irp->orig_addr));
+ if (record_memory_query)
+ {
+ int q;
+
+ target_terminal_ours ();
+ q = yquery (_("\
+Process record ignores the memory change of instruction at address %s\n\
+because it can't get the value of the segment register.\n\
+Do you want to stop the program?"),
+ paddress (gdbarch, irp->orig_addr));
+ target_terminal_inferior ();
+ if (q)
+ return -1;
+ }
+
return 0;
}
@@ -4355,11 +4366,20 @@ i386_process_record (struct gdbarch *gdb
case 0xa3:
if (ir.override >= 0)
{
- warning (_("Process record ignores the memory change "
- "of instruction at address %s because "
- "it can't get the value of the segment "
- "register."),
- paddress (gdbarch, ir.orig_addr));
+ if (record_memory_query)
+ {
+ int q;
+
+ target_terminal_ours ();
+ q = yquery (_("\
+Process record ignores the memory change of instruction at address %s\n\
+because it can't get the value of the segment register.\n\
+Do you want to stop the program?"),
+ paddress (gdbarch, ir.orig_addr));
+ target_terminal_inferior ();
+ if (q)
+ return -1;
+ }
}
else
{
@@ -5036,11 +5056,20 @@ i386_process_record (struct gdbarch *gdb
if (ir.aflag && (es != ds))
{
/* addr += ((uint32_t) read_register (I386_ES_REGNUM)) << 4; */
- warning (_("Process record ignores the memory "
- "change of instruction at address %s "
- "because it can't get the value of the "
- "ES segment register."),
- paddress (gdbarch, ir.orig_addr));
+ if (record_memory_query)
+ {
+ int q;
+
+ target_terminal_ours ();
+ q = yquery (_("\
+Process record ignores the memory change of instruction at address %s\n\
+because it can't get the value of the segment register.\n\
+Do you want to stop the program?"),
+ paddress (gdbarch, ir.orig_addr));
+ target_terminal_inferior ();
+ if (q)
+ return -1;
+ }
}
else
{
@@ -5593,12 +5622,20 @@ i386_process_record (struct gdbarch *gdb
}
if (ir.override >= 0)
{
- warning (_("Process record ignores the memory "
- "change of instruction at "
- "address %s because it can't get "
- "the value of the segment "
- "register."),
- paddress (gdbarch, ir.orig_addr));
+ if (record_memory_query)
+ {
+ int q;
+
+ target_terminal_ours ();
+ q = yquery (_("\
+Process record ignores the memory change of instruction at address %s\n\
+because it can't get the value of the segment register.\n\
+Do you want to stop the program?"),
+ paddress (gdbarch, ir.orig_addr));
+ target_terminal_inferior ();
+ if (q)
+ return -1;
+ }
}
else
{
@@ -5642,12 +5679,20 @@ i386_process_record (struct gdbarch *gdb
/* sidt */
if (ir.override >= 0)
{
- warning (_("Process record ignores the memory "
- "change of instruction at "
- "address %s because it can't get "
- "the value of the segment "
- "register."),
- paddress (gdbarch, ir.orig_addr));
+ if (record_memory_query)
+ {
+ int q;
+
+ target_terminal_ours ();
+ q = yquery (_("\
+Process record ignores the memory change of instruction at address %s\n\
+because it can't get the value of the segment register.\n\
+Do you want to stop the program?"),
+ paddress (gdbarch, ir.orig_addr));
+ target_terminal_inferior ();
+ if (q)
+ return -1;
+ }
}
else
{
--- a/linux-record.c
+++ b/linux-record.c
@@ -695,21 +695,26 @@ record_linux_system_call (enum gdb_sysca
case gdb_sys_munmap:
{
- int q;
ULONGEST len;
regcache_raw_read_unsigned (regcache, tdep->arg1,
&tmpulongest);
regcache_raw_read_unsigned (regcache, tdep->arg2, &len);
- target_terminal_ours ();
- q = yquery (_("The next instruction is syscall munmap. "
- "It will free the memory addr = 0x%s len = %u. "
- "It will make record target get error. "
- "Do you want to stop the program?"),
- OUTPUT_REG (tmpulongest, tdep->arg1), (int) len);
- target_terminal_inferior ();
- if (q)
- return 1;
+ if (record_memory_query)
+ {
+ int q;
+
+ target_terminal_ours ();
+ q = yquery (_("\
+The next instruction is syscall munmap.\n\
+It will free the memory addr = 0x%s len = %u.\n\
+It will make record target cannot record some memory change.\n\
+Do you want to stop the program?"),
+ OUTPUT_REG (tmpulongest, tdep->arg1), (int) len);
+ target_terminal_inferior ();
+ if (q)
+ return 1;
+ }
}
break;
--- a/record.c
+++ b/record.c
@@ -152,6 +152,10 @@ struct record_entry
/* This is the debug switch for process record. */
int record_debug = 0;
+/* If true, query if PREC cannot record memory
+ change of next instruction. */
+int record_memory_query = 0;
+
struct record_core_buf_entry
{
struct record_core_buf_entry *prev;
@@ -2730,4 +2734,15 @@ record/replay buffer. Zero means unlimi
Restore the program to its state at instruction number N.\n\
Argument is instruction number, as shown by 'info record'."),
&record_cmdlist);
+
+ add_setshow_boolean_cmd ("memory-query", no_class,
+ &record_memory_query, _("\
+Set whether query if PREC cannot record memory change of next instruction."),
+ _("\
+Show whether query if PREC cannot record memory change of next instruction."),
+ _("\
+Default is OFF.\n\
+When ON, query if PREC cannot record memory change of next instruction."),
+ NULL, NULL,
+ &set_record_cmdlist, &show_record_cmdlist);
}
--- a/record.h
+++ b/record.h
@@ -23,6 +23,7 @@
#define RECORD_IS_USED (current_target.to_stratum == record_stratum)
extern int record_debug;
+extern int record_memory_query;
extern int record_arch_list_add_reg (struct regcache *regcache, int num);
extern int record_arch_list_add_mem (CORE_ADDR addr, int len);