Hi, guys
I've rewrite the codes for opcode 0x0f01 with more readable, add
xgetbv/xsetbv/rdtscp/vmcall/vmlaunch/vmresume/vmxoff instructions
support as well.
However, I'm *not* sure it's whether right or not, especially with
the new supported instructions beginning with "vm". And I remove all
codes to save EFLAGS register which is not specified to be saved by
Intel's manual, so please help me review them.
Luckily, there is no regression when using precord.exp board file to test.
At last but not least, there is some differences in gdb.sum when
'make check' before and after applying this patch. I cannot make
a decision whether it's correct, so please help me. The diff are
as follows:
--- testsuite/gdb.sum.before 2009-10-10 20:02:35.000000000 +0800
+++ testsuite/gdb.sum.after 2009-10-10 20:21:35.000000000 +0800
@@ -1,4 +1,4 @@
-Test Run By jiang on Sat Oct 10 19:44:30 2009
+Test Run By jiang on Sat Oct 10 20:05:20 2009
Native configuration is i686-pc-linux-gnu
=== gdb tests ===
@@ -14113,18 +14113,18 @@
PASS: gdb.threads/watchthreads2.exp: all threads started
PASS: gdb.threads/watchthreads2.exp: watch x
PASS: gdb.threads/watchthreads2.exp: set var test_ready = 1
-KFAIL: gdb.threads/watchthreads2.exp: gdb can drop watchpoints in multithreaded app (PRMS: gdb/10116)
+PASS: gdb.threads/watchthreads2.exp: all threads incremented x
Running ./gdb.threads/watchthreads.exp ...
PASS: gdb.threads/watchthreads.exp: successfully compiled posix threads test case
PASS: gdb.threads/watchthreads.exp: watch args[0]
PASS: gdb.threads/watchthreads.exp: watch args[1]
PASS: gdb.threads/watchthreads.exp: disable 2
-FAIL: gdb.threads/watchthreads.exp: threaded watch loop
+PASS: gdb.threads/watchthreads.exp: threaded watch loop
PASS: gdb.threads/watchthreads.exp: first watchpoint on args[0] hit
PASS: gdb.threads/watchthreads.exp: first watchpoint on args[1] hit
PASS: gdb.threads/watchthreads.exp: watchpoint on args[0] hit in thread
PASS: gdb.threads/watchthreads.exp: watchpoint on args[1] hit in thread
-FAIL: gdb.threads/watchthreads.exp: combination of threaded watchpoints = 30
+PASS: gdb.threads/watchthreads.exp: combination of threaded watchpoints = 30
Running ./gdb.trace/actions.exp ...
PASS: gdb.trace/actions.exp: 5.1a: set three tracepoints, no actions
PASS: gdb.trace/actions.exp: 5.1b: set actions for first tracepoint
@@ -14288,8 +14288,8 @@
=== gdb Summary ===
-# of expected passes 13512
-# of unexpected failures 76
+# of expected passes 13515
+# of unexpected failures 74
2009-10-10 Jiang Jilin <freephp@gmail.com>
* i386-tdep.c (i386_process_record): Rewrite the codes for
opcode 0x0f01 and add more instructions support
---
gdb/i386-tdep.c | 234 ++++++++++++++++++++++++------------------------------
1 files changed, 104 insertions(+), 130 deletions(-)
diff --git a/gdb/i386-tdep.c b/gdb/i386-tdep.c
index b79bcd2..2300a91 100644
--- a/gdb/i386-tdep.c
+++ b/gdb/i386-tdep.c
@@ -5075,152 +5075,126 @@ reswitch:
case 0x0f01:
if (i386_record_modrm (&ir))
return -1;
- switch (ir.reg)
+ if (ir.mod == 3)
{
- /* sgdt */
- case 0:
- {
- uint64_t tmpu64;
-
- if (ir.mod == 3)
- {
- ir.addr -= 3;
- opcode = opcode << 8 | ir.modrm;
- goto no_support;
- }
- if (ir.override >= 0)
- {
- warning (_("Process record ignores the memory "
- "change of instruction at "
- "address %s because it can't get "
- "the value of the segment "
- "register."),
- paddress (gdbarch, ir.orig_addr));
- }
- else
- {
- if (i386_record_lea_modrm_addr (&ir, &tmpu64))
- return -1;
- if (record_arch_list_add_mem (tmpu64, 2))
- return -1;
- tmpu64 += 2;
- if (ir.regmap[X86_RECORD_R8_REGNUM])
- {
- if (record_arch_list_add_mem (tmpu64, 8))
- return -1;
- }
- else
- {
- if (record_arch_list_add_mem (tmpu64, 4))
- return -1;
- }
- }
- }
- break;
- case 1:
- if (ir.mod == 3)
+ uint8_t reg_rm = (ir.reg << 4) | ir.rm;
+
+ switch (reg_rm)
{
- switch (ir.rm)
- {
- /* monitor */
- case 0:
- break;
- /* mwait */
- case 1:
- I386_RECORD_ARCH_LIST_ADD_REG (X86_RECORD_EFLAGS_REGNUM);
- break;
- default:
- ir.addr -= 3;
- opcode = opcode << 8 | ir.modrm;
- goto no_support;
- break;
+ /* vmcall */
+ case 0x01:
+ /* vmlaunch */
+ case 0x02:
+ /* vmresume */
+ case 0x03:
+ /* vmxoff */
+ case 0x04:
+ I386_RECORD_ARCH_LIST_ADD_REG (X86_RECORD_EFLAGS_REGNUM);
+ break;
+ /* monitor */
+ case 0x10:
+ break;
+ /* mwait */
+ case 0x11:
+ I386_RECORD_ARCH_LIST_ADD_REG (X86_RECORD_EFLAGS_REGNUM);
+ break;
+ /* xgetbv */
+ case 0x20:
+ I386_RECORD_ARCH_LIST_ADD_REG (X86_RECORD_REAX_REGNUM);
+ I386_RECORD_ARCH_LIST_ADD_REG (X86_RECORD_REDX_REGNUM);
+ break;
+ /* xsetbv */
+ case 0x21:
+ break;
+ /* swapgs */
+ case 0x70:
+ if (ir.regmap[X86_RECORD_R8_REGNUM])
+ I386_RECORD_ARCH_LIST_ADD_REG (X86_RECORD_GS_REGNUM);
+ else
+ {
+ ir.addr -= 3;
+ opcode = opcode << 8 | ir.modrm;
+ goto no_support;
+ }
+ break;
+ /* rdtscp */
+ case 0x71:
+ I386_RECORD_ARCH_LIST_ADD_REG (X86_RECORD_REAX_REGNUM);
+ I386_RECORD_ARCH_LIST_ADD_REG (X86_RECORD_RECX_REGNUM);
+ I386_RECORD_ARCH_LIST_ADD_REG (X86_RECORD_REDX_REGNUM);
+ break;
+ default:
+ /* smsw */
+ if (ir.reg == 4)
+ {
+ I386_RECORD_ARCH_LIST_ADD_REG (ir.rm | ir.rex_b);
+ break;
}
+ /* lmsw */
+ else if (ir.reg == 6)
+ break;
+ ir.addr -= 3;
+ opcode = opcode << 8 | ir.modrm;
+ goto no_support;
}
- else
+ }
+ else
+ {
+ switch (ir.reg)
{
- /* sidt */
+ /* sgdt */
+ case 0:
+ /* sidt */
+ case 1:
if (ir.override >= 0)
- {
+ {
warning (_("Process record ignores the memory "
- "change of instruction at "
- "address %s because it can't get "
- "the value of the segment "
- "register."),
- paddress (gdbarch, ir.orig_addr));
+ "change of instruction at "
+ "address %s because it can't get "
+ "the value of the segment "
+ "register."),
+ paddress (gdbarch, ir.orig_addr));
}
else
- {
- uint64_t tmpu64;
+ {
+ uint64_t tmpu64;
- if (i386_record_lea_modrm_addr (&ir, &tmpu64))
+ /* We have to store at least (4 + 2 = 6) bytes,
+ or (8 + 2 = 10) bytes at most. */
+ if (i386_record_lea_modrm_addr (&ir, &tmpu64))
+ return -1;
+ if (record_arch_list_add_mem (tmpu64, 6))
return -1;
- if (record_arch_list_add_mem (tmpu64, 2))
- return -1;
- addr += 2;
- if (ir.regmap[X86_RECORD_R8_REGNUM])
- {
- if (record_arch_list_add_mem (tmpu64, 8))
- return -1;
- }
- else
- {
- if (record_arch_list_add_mem (tmpu64, 4))
- return -1;
- }
+ tmpu64 += 6;
+ if (ir.regmap[X86_RECORD_R8_REGNUM])
+ {
+ if (record_arch_list_add_mem (tmpu64, 4))
+ return -1;
+ }
}
- }
- break;
- /* lgdt */
- case 2:
- /* lidt */
- case 3:
- if (ir.mod == 3)
- {
- ir.addr -= 3;
- opcode = opcode << 8 | ir.modrm;
- goto no_support;
- }
- break;
- /* smsw */
- case 4:
- if (ir.mod == 3)
- {
- if (record_arch_list_add_reg (ir.regcache, ir.rm | ir.rex_b))
- return -1;
- }
- else
- {
+ break;
+ /* lgdt */
+ case 2:
+ /* lidt */
+ case 3:
+ break;
+ /* smsw */
+ case 4:
ir.ot = OT_WORD;
if (i386_record_lea_modrm (&ir))
return -1;
+ break;
+ /* lmsw */
+ case 6:
+ break;
+ /* invlpg */
+ case 7:
+ break;
+ default:
+ ir.addr -= 3;
+ opcode = opcode << 8 | ir.modrm;
+ goto no_support;
}
- I386_RECORD_ARCH_LIST_ADD_REG (X86_RECORD_EFLAGS_REGNUM);
- break;
- /* lmsw */
- case 6:
- I386_RECORD_ARCH_LIST_ADD_REG (X86_RECORD_EFLAGS_REGNUM);
- break;
- /* invlpg */
- case 7:
- if (ir.mod == 3)
- {
- if (ir.rm == 0 && ir.regmap[X86_RECORD_R8_REGNUM])
- I386_RECORD_ARCH_LIST_ADD_REG (X86_RECORD_GS_REGNUM);
- else
- {
- ir.addr -= 3;
- opcode = opcode << 8 | ir.modrm;
- goto no_support;
- }
- }
- else
- I386_RECORD_ARCH_LIST_ADD_REG (X86_RECORD_EFLAGS_REGNUM);
- break;
- default:
- ir.addr -= 3;
- opcode = opcode << 8 | ir.modrm;
- goto no_support;
- break;
}
break;