This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Fw: gdb on ethernet

From: "Jaws" <jaws75 at tiscali dot it>
To: <ecos-discuss at sources dot redhat dot com>
Date: Wed, 28 Dec 2005 19:08:57 +0100
Subject: [ECOS] Fw: gdb on ethernet

Hi all,
    I'm using an EB40A with an additional ethernet board based on CS8900A.
The networking working fine with th redboot installed, but when I tried to
debug with gdb through the ethernet interface, the gdb load correctly the
code into the device but if a breakpoint or an exception occur the gdb send
the output to the serial interface.
Is it possibile to route the gdb output to the ethernet interface?

Thanks in advance.
Jaws


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]