This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: 1st build of redboot
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Greg Lindberg <gl4jalopi at earthlink dot net>
- Cc: eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
- Date: Wed, 01 Jun 2005 18:31:57 -0600
- Subject: Re: [ECOS] 1st build of redboot
- References: <MPEAJFOFNNOAIMOHBACIMEGGDPAA.gl4jalopi@earthlink.net>
On Wed, 2005-06-01 at 16:10 -0700, Greg Lindberg wrote:
> Hello all,
>
> I'm just getting started with Redboot and ecos. I trying to build an
> existing version of redboot before starting on porting it to the custom
> hardware that we're using for our product. I downloaded the
> ecos-installer.sh script and ran that and after trying to configure for an
> intel xscale pxa processor, I pulled the latest code from cvs and copied it
> on top of the tree that the installer created. I then was able to configure
> for the uE250 board. I got some warnings and then a failure during the
> compile as follows:
Use the anonymous CVS tree (instead of the hodge-podge you have). These
problems will vanish.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss